A-Z Manufacturers (SURFASOLOGY) |  CAWS Index

View larger image of Maxseal Super from SURFASOLOGYMaxseal Super

Cement-based, waterproof coating with crystallization and osmotic properties, designed for use on concrete and masonry surfaces. Consisting of a mix of selected cements, aggregates, chemical additives and water. The mixed material penetrates the concrete through its capillaries and crystallizes, sealing and waterproofing the concrete.Can be applied using fibre-bristled brush or spray.Features and benefits:100% waterproof coating.Approved for use with drinking water in accordance with BS 6920 and R.D. 140/2003.Suitable for positive and negative water pressure applications.Seals cracks up to 0.4 mm.Resists the corrosive effects of salt water and atmospheric pollution.Environmentally friendly and non-toxic.Excellent adhesion and easy to apply.Can be painted over if required.Applications:Suitable for above and below ground applications. Surfaces treated with Maxseal Super, should be protected from rain for at least 24 hours after application.Technical characteristics:Coverage: 1–1.5 kg/m² (per coat).Appearance: Grey cement-.based material.Application temperature: >10°C.Curing time: 6–24 hours.Adhesion to concrete: >2 MPa.Flexural strength: >8 MPa.Compressive strength: >40 MPa.0CE marked89/106/CEMaxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface

Cement-based, waterproof coating with crystallization and osmotic properties, designed for use on concrete and masonry surfaces. Consisting of a mix of selected cements, aggregates, chemical additives and water. The mixed material penetrates the concrete through its capillaries and crystallizes, sealing and waterproofing the concrete.

Can be applied using fibre-bristled brush or spray.

Features and benefits:

  • 100% waterproof coating.
  • Approved for use with drinking water in accordance with BS 6920 and R.D. 140/2003.
  • Suitable for positive and negative water pressure applications.
  • Seals cracks up to 0.4 mm.
  • Resists the corrosive effects of salt water and atmospheric pollution.
  • Environmentally friendly and non-toxic.
  • Excellent adhesion and easy to apply.
  • Can be painted over if required.

Applications:

Suitable for above and below ground applications. Surfaces treated with Maxseal Super, should be protected from rain for at least 24 hours after application.

More about Maxseal Super:
As standard - Approvals

Maxseal Super
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
Maxseal Super.


top ^

Guidance

for Maxseal Super

from SURFASOLOGY

More about Maxseal Super: As standard - Approvals

As standard

Technical characteristics:

  • Coverage: 1–1.5 kg/m² (per coat).
  • Appearance: Grey cement-.based material.
  • Application temperature: >10°C.
  • Curing time: 6–24 hours.
  • Adhesion to concrete: >2 MPa.
  • Flexural strength: >8 MPa.
  • Compressive strength: >40 MPa.

Approvals

  • CE marked: 89/106/CE Maxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017