A-Z Manufacturers (SURFASOLOGY) |  CAWS Index

View larger image of EasySeal from SURFASOLOGYEasySeal

A needle-punched non-woven fleece, impregnated with water-absorbing and water-swelling polymer, which is self-healing.Penetrating water causes the polymers to swell and thus renders the membrane impermeable. The building structure is permanently protected against penetrating water: even small cracks and voids in the concrete are sealed.EasySeal is a lightweight waterproofing system for use in any water-sealing applications. Overlaps can be detailed with CEM 805 Polymer Adhesive.The product is available with a UV protection layer; see SilverSeal.Features and benefits:Tough and resistant, plus quick and easy to install.High compound shear strength.Can be installed in every season, independently of temperature and weather condition.No need for complicated welding equipment or specially trained personnel.Quality controlled product.Self-healing properties due to the pressure of the swelling polymers.Seals small cracks in the concrete by the pressure of the swelling SAP.Can be used in saltwater conditions.Independently tested at the University of Braunschweig, Germany.Enormous water-absorbing capacity, and therefore enormous swelling and sealing capacity.Technical characteristics:Type: Needle-punched non-woven, impregnated.Raw material: Polypropylene fibres.Swelling material: Water-absorbing, swelling polymer.Mass per unit area, dry/ wet after swelling/ re-dried to EN 965: 450/ 8200/ 400 g/m².Thickness at surcharge 2 kN/m², dry/ wet after swelling/ re-dried to EN 964: 1.9/ 7.5/ 4.5 mm.Surcharge 20 kN/m² / 200 kN/m², dry: 2.2/ 1.3 mm.Maximum tensile force, dry/ wet after swelling/ re-dried to EN 1031: 11.6/ 3.4/ 10.3 kN/m.Associated elongation, dry/ wet after swelling/ re-dried to EN 10319: 69/ 117/ 92%.Static puncture test, dry/ wet after swelling/ re-dried to EN 12236: 1.7/ 1.0/ 1.6 kN.Associated movement of plunger, dry/ wet after swelling/ re-dried to EN 12236: 6.1/ 10.8/ 6.1 cm.Class of robustness: GRK 3.Water permeability to DIN 18130: TX-KP-STUO.Initial swelling: <5 x 10-9.Dry-Wet testing: <3 x 10-9.Frost-thaw-cycle (four cycles): < 3,9 x 10-9.

A needle-punched non-woven fleece, impregnated with water-absorbing and water-swelling polymer, which is self-healing.

Penetrating water causes the polymers to swell and thus renders the membrane impermeable. The building structure is permanently protected against penetrating water: even small cracks and voids in the concrete are sealed.

EasySeal is a lightweight waterproofing system for use in any water-sealing applications. Overlaps can be detailed with CEM 805 Polymer Adhesive.

The product is available with a UV protection layer; see SilverSeal.

Features and benefits:

  • Tough and resistant, plus quick and easy to install.
  • High compound shear strength.
  • Can be installed in every season, independently of temperature and weather condition.
  • No need for complicated welding equipment or specially trained personnel.
  • Quality controlled product.
  • Self-healing properties due to the pressure of the swelling polymers.
  • Seals small cracks in the concrete by the pressure of the swelling SAP.
  • Can be used in saltwater conditions.
  • Independently tested at the University of Braunschweig, Germany.
  • Enormous water-absorbing capacity, and therefore enormous swelling and sealing capacity.

More about EasySeal:
As standard

EasySeal
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
EasySeal.


top ^

Guidance

for EasySeal

from SURFASOLOGY

More about EasySeal: As standard

As standard

Technical characteristics:

  • Type: Needle-punched non-woven, impregnated.
  • Raw material: Polypropylene fibres.
  • Swelling material: Water-absorbing, swelling polymer.
  • Mass per unit area, dry/ wet after swelling/ re-dried to EN 965: 450/ 8200/ 400 g/m².
  • Thickness at surcharge 2 kN/m², dry/ wet after swelling/ re-dried to EN 964: 1.9/ 7.5/ 4.5 mm.
  • Surcharge 20 kN/m² / 200 kN/m², dry: 2.2/ 1.3 mm.
  • Maximum tensile force, dry/ wet after swelling/ re-dried to EN 1031: 11.6/ 3.4/ 10.3 kN/m.
  • Associated elongation, dry/ wet after swelling/ re-dried to EN 10319: 69/ 117/ 92%.
  • Static puncture test, dry/ wet after swelling/ re-dried to EN 12236: 1.7/ 1.0/ 1.6 kN.
  • Associated movement of plunger, dry/ wet after swelling/ re-dried to EN 12236: 6.1/ 10.8/ 6.1 cm.
  • Class of robustness: GRK 3.
  • Water permeability to DIN 18130: TX-KP-STUO.
  • Initial swelling: <5 x 10-9.
  • Dry-Wet testing: <3 x 10-9.
  • Frost-thaw-cycle (four cycles): < 3,9 x 10-9.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 16 December 2017