A-Z Manufacturers (SURFASOLOGY) |  CAWS Index

View larger image of CEMdicht 3 in 1 from SURFASOLOGYCEMdicht 3 in 1

Mineral based waterproofing product, used for the protection of structures against ground dampness, pressing water and non-pressing water. Can be applied to waterproof concrete and as a remedial waterproof coating.A dry, grey cementitious powder mortar that can be used with the following components to create three different end products:Powder and water creates a firm mineral sealant silt.Powder and CEMdicht flex creates a flexible sealant slurry.Powder and CEMdicht flex+ creates a flexible and crystalline sealant slurry.By adding the liquid component CEMdicht flex, the mineral sealant silt will become so flexible that it can be applied to highly stressed, crack prone underground areas. The liquid component CEMdicht flex+ has crystalline characteristics, allowing the structure to self-heal shrinkage cracks.The product holds the General Building Code Test Certificate (abP).Features and benefits:Comes in ready to use 30 kg bags.Application can be by brushing, trowelling or spraying.Can be applied directly on to reinforced concrete (to DIN 1045), well pointed masonry (to DIN 1053), and cement plaster and render (to DIN 18550).Suitable as waterproofing coating for underground screeds, plasters of the mortar groups PI, PII and PIII, as well as for tiles and slabs.Applications: Typical application fields include waterproofing of concrete: Vertical waterproofing of earth touching constructions.Exterior and interior walls.Slabs and foundations. Vertical waterproofing of splash water areas at wall bases. Cross section of walls and slabs.Water tanks. During construction work.Colour:Grey.Coverage (dry mortar):For ground dampness and non-pressure water flow: Approximately 4 kg/m² (2 mm layer thickness).For pressure water flow: Approximately 7 kg/m² (4 mm layer thickness).Application temperature:Above 5°C.

Mineral based waterproofing product, used for the protection of structures against ground dampness, pressing water and non-pressing water. Can be applied to waterproof concrete and as a remedial waterproof coating.

A dry, grey cementitious powder mortar that can be used with the following components to create three different end products:

  • Powder and water creates a firm mineral sealant silt.
  • Powder and CEMdicht flex creates a flexible sealant slurry.
  • Powder and CEMdicht flex+ creates a flexible and crystalline sealant slurry.

By adding the liquid component CEMdicht flex, the mineral sealant silt will become so flexible that it can be applied to highly stressed, crack prone underground areas. The liquid component CEMdicht flex+ has crystalline characteristics, allowing the structure to self-heal shrinkage cracks.

The product holds the General Building Code Test Certificate (abP).

Features and benefits:

  • Comes in ready to use 30 kg bags.
  • Application can be by brushing, trowelling or spraying.
  • Can be applied directly on to reinforced concrete (to DIN 1045), well pointed masonry (to DIN 1053), and cement plaster and render (to DIN 18550).
  • Suitable as waterproofing coating for underground screeds, plasters of the mortar groups PI, PII and PIII, as well as for tiles and slabs.

Applications:

Typical application fields include waterproofing of concrete:

  • Vertical waterproofing of earth touching constructions.
  • Exterior and interior walls.
  • Slabs and foundations.
  • Vertical waterproofing of splash water areas at wall bases.
  • Cross section of walls and slabs.
  • Water tanks.
  • During construction work.

More about CEMdicht 3 in 1:
As standard

CEMdicht 3 in 1
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
CEMdicht 3 in 1.
 Liquid component:
[Not required].
[CEMdicht flex]. - For a flexible sealant slurry.
[CEMdicht flex+]. - For a crystalline sealant slurry.


top ^

Guidance

for CEMdicht 3 in 1

from SURFASOLOGY

More about CEMdicht 3 in 1: As standard

As standard

Colour:

Grey.

Coverage (dry mortar):

  • For ground dampness and non-pressure water flow: Approximately 4 kg/m² (2 mm layer thickness).
  • For pressure water flow: Approximately 7 kg/m² (4 mm layer thickness).

Application temperature:

Above 5°C.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 12 December 2017