A-Z Manufacturers (Lorient Polyproducts Ltd) |  CAWS Index

View larger image of LAS8013 si Drop Seal from Lorient Polyproducts LtdLAS8013 si Drop Seal

Heavy-duty automatic drop seal which is mortised. Designed for optimum performance. It is spring-loaded to lift clear of the floor as soon as the door is opened by a few millimetres. The seal height can be adjusted independently of fixing screws. Requires no power connection. Key benefits:Protects against weather, draught and light.Suitable for wheeled traffic. Features a parallel drop mechanism. Self-levelling on uneven surfaces.Mortised seal. Tested for acoustic performance with BS EN ISO 10140-1:2010+A2:2014 (Annex J). Meets the performance requirements of BS 9999, and is used for sealing the threshold of door assemblies against the leakage of ambient temperature smoke.During a durability test, the seal completed 1000 000 cycles without failure. Fixing screws and pre-drilled end plates are supplied.Material:Gasket: Grey silicone rubber.End caps: Nylon.Finish:Die cast end plates are available in a metallic finish. The non-button end is designed blank, creating an engineered smooth aesthetic.Location: Single swing doors. For use on both right- and left-handed doors. Use with:Any perimeter seal.Any threshold plate. Dimensions: 44 mm high (excluding seal in dropped position) x 21 mm wide. Minimum/ maximum gap size: 1 mm/ 15 mm.Acoustic performance: Weighted Sound Reduction Index (Rw): Up to 43 dB.Length:All lengths can be cut to the next size down.

Heavy-duty automatic drop seal which is mortised. Designed for optimum performance. It is spring-loaded to lift clear of the floor as soon as the door is opened by a few millimetres. The seal height can be adjusted independently of fixing screws. Requires no power connection.

Key benefits:

  • Protects against weather, draught and light.
  • Suitable for wheeled traffic.
  • Features a parallel drop mechanism.
  • Self-levelling on uneven surfaces.
  • Mortised seal.
  • Tested for acoustic performance with BS EN ISO 10140-1:2010+A2:2014 (Annex J).
  • Meets the performance requirements of BS 9999, and is used for sealing the threshold of door assemblies against the leakage of ambient temperature smoke.
  • During a durability test, the seal completed 1000 000 cycles without failure.

Fixing screws and pre-drilled end plates are supplied.

More about LAS8013 si Drop Seal:
As standard - Options

LAS8013 si Drop Seal
 Manufacturer:
Lorient Polyproducts Ltd.
  -Web:www.lorientuk.com.
  -Tel:+44 (0)1626 834252.
  -Product reference:
LAS8013 si Drop Seal.
 Length:
[335 mm]. - Can be cut back to 275 mm.
[435 mm].
[535 mm].
[635 mm].
[735 mm].
[835 mm].
[935 mm].
[1035 mm].
[1135 mm].
[1235 mm].
 Colour/ Finish:
[Silver anodized aluminium with black silicone rubber gasket].
[Silver anodized aluminium with grey silicone rubber gasket].
 Version (End Plates):
[Radiused].
[Square].


top ^

Guidance

for LAS8013 si Drop Seal

from Lorient Polyproducts Ltd

More about LAS8013 si Drop Seal: As standard - Options

As standard

Material:

  • Gasket: Grey silicone rubber.
  • End caps: Nylon.

Finish:

  • Die cast end plates are available in a metallic finish.
  • The non-button end is designed blank, creating an engineered smooth aesthetic.

Location:

Single swing doors. For use on both right- and left-handed doors.

Use with:

  • Any perimeter seal.
  • Any threshold plate.

Dimensions:

44 mm high (excluding seal in dropped position) x 21 mm wide.

Minimum/ maximum gap size:

1 mm/ 15 mm.

Acoustic performance:

Weighted Sound Reduction Index (Rw): Up to 43 dB.

Options

Length:

All lengths can be cut to the next size down.

Further Information

Literature:

RIBA CPD

CPD information is available for Lorient Polyproducts Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Lorient Polyproducts Ltd from ribaproductselector.com.

Contacts:

www.lorientuk.com

mktg@lorientuk.com

T: +44 (0)1626 834252

F: +44 (0)1626 833166

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 14 December 2017