NBS National BIM Library Visit the NBS National BIM Library

Did you know? Having set specification standards for the UK, NBS have now established the same high standards for BIM Objects.

NBS National BIM Library offers a free-to-use resource of NBS standard generic and propietary BIM Objects in industry-neutral IFC and formats compatible with Autodesk Revit, ArchiCAD, Vectorworks, Tekla and Bentley.

NBS Plus - Bringing specifiers and manufacturers together.product specifications by NBS

The product information below is from the NBS Plus library of product clauses offered in NBS specification products. It has been created by NBS for Kingspan Insulation. The clause is authored in NBS format and is intended for inclusion in project specifications. The clause can be copied and pasted into your project specification document. Please note that NBS product guidance is not a replacement for the manufacturer's literature and it is recommended that Kingspan Insulation be consulted before specifying.

To find out more about producing specifications for building projects visit www.theNBS.com/solutions

View larger image of Therma Duct Insulation from Kingspan InsulationTherma Duct Insulation

Kingspan Therma Duct Insulation is suitable for both new build and refurbishment projects in the residential, commercial, institutional and industrial sectors.The CFC/ HCFC-free rigid thermoset polyisocyanurate insulation core of the Kingspan Therma Duct Insulation is manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP).Standards:Kingspan Therma Duct Insulation is manufactured to the highest standards under a quality control system approved to BS EN ISO 9001: 2000/ IS EN ISO 9001: 2008 (Quality management systems. Requirements).It is also manufactured in accordance with:BS EN ISO 14001: 2004/ I.S EN ISO 14001: 2004 (Environmental Management Systems. Requirements).BS OHSAS 18001: 2007/ IS OHSAS 18001: 2007 (Health and Safety Management Systems. Requirements).The Kingspan Therma Duct Insulation System achieves a BRE Green Guide rating of A+.Facings:Kingspan Therma Duct Insulation is faced on both sides with an extremely durable and protective low vapour permeability puncture resistant trilaminate foil autohesively bonded to the insulation core during manufacture.Thermal conductivity:0.023 W/mK at 23 °C and 50 % RH.Fire performanceBS 476-7: 1997: Class 1.Compressive strength (minimum):140 kPa at 10% compression.Closed cell content:≥ 90 %.Nominal density:32 kg/m³.Water vapour resistance100 MN·s/g at 23 °C and 50 % RH.Operating temperature limits-20 °C to +80 °C.Specific heat capacity1.4 kJ/kgoC.

Kingspan Therma Duct Insulation is suitable for both new build and refurbishment projects in the residential, commercial, institutional and industrial sectors.

The CFC/ HCFC-free rigid thermoset polyisocyanurate insulation core of the Kingspan Therma Duct Insulation is manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP).

Standards:

Kingspan Therma Duct Insulation is manufactured to the highest standards under a quality control system approved to BS EN ISO 9001: 2000/ IS EN ISO 9001: 2008 (Quality management systems. Requirements).

It is also manufactured in accordance with:

  • BS EN ISO 14001: 2004/ I.S EN ISO 14001: 2004 (Environmental Management Systems. Requirements).
  • BS OHSAS 18001: 2007/ IS OHSAS 18001: 2007 (Health and Safety Management Systems. Requirements).

The Kingspan Therma Duct Insulation System achieves a BRE Green Guide rating of A+.

More about Therma Duct Insulation:
As standard

Therma Duct Insulation
 Manufacturer:
Kingspan Insulation.
  -Web:www.kingspaninsulation.co.uk.
  -Tel:+44 (0)1544 387601.
  -Product reference:
Therma Duct Insulation.
 Board size:
[600 x 1200 mm].
[600 x 2400 mm].
[Contractor’s choice].
 Thickness:
[??? mm]. - Please refer to product literature, consult your local distributor or contact Kingspan Insulation Technical Services for a full range of available thicknesses.

top ^


Guidance

for Therma Duct Insulation

from Kingspan Insulation

More about Therma Duct Insulation: As standard

As standard

Facings:

Kingspan Therma Duct Insulation is faced on both sides with an extremely durable and protective low vapour permeability puncture resistant trilaminate foil autohesively bonded to the insulation core during manufacture.

Thermal conductivity:

0.023 W/mK at 23 °C and 50 % RH.

Fire performance

BS 476-7: 1997:

  • Class 1.

Compressive strength (minimum):

140 kPa at 10% compression.

Closed cell content:

≥ 90 %.

Nominal density:

32 kg/m³.

Water vapour resistance

100 MN·s/g at 23 °C and 50 % RH.

Operating temperature limits

-20 °C to +80 °C.

Specific heat capacity

1.4 kJ/kgoC.

Further Information

Literature:

RIBA CPD

CPD information is available for Kingspan Insulation from ribacpd.com.

RIBA Product Selector

Additional information may be available for Kingspan Insulation from ribaproductselector.com.

Contacts:

www.kingspaninsulation.co.uk

info@kingspaninsulation.co.uk

T: +44 (0)1544 387601

Drag work item to add to schedule

top ^

 
NBS Plus
www.thenbs.com/solutions, online library, 22 August 2017