A-Z Manufacturers (Hörmann (UK) Ltd) |  CAWS Index

SPU 40

An insulated sectional overhead door consisting of a combination of 500 mm and 375 mm deep or 750 mm and 625 mm deep double-skinned galvanized steel, horizontally ribbed door panels. The steel sections are horizontally profiled at 125 mm centres to match STE 40 and TPU 40 steel doors.Track system:Galvanized steel track system with side frames shaped as hand guards:Door panels:Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.Finish as delivered:Polyester stucco embossed coating on both sides.Internal colour:Off white – RAL 9002.Wind pressure:To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.Fire performance:To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.Manual opening force:<260 N.Performance (Power operated only):Closing force:<400 N.Glazing options:3 mm Clear synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.3 mm Crystal structured synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.Clear synthetic double panes – 11, 16, 29, 31 or 33 mm: For compound window with zinc die-cast frame and for aluminium glazing frame.Crystal structured synthetic double panes – 16 mm or 29 mm: For aluminium glazing frame.6 mm Clear polycarbonate pane, burglar proof and impact resistant: For aluminium glazing frame.16 mm Clear polycarbonate double pane, burglar proof and impact resistant: For compound window with zinc die-cast frame and for aluminium glazing frame.16 mm Double moulded unit: For aluminium glazing frame.Expanded mesh, galvanized steel, powder coated: For aluminium glazing frame.Perforated sheet – smooth stainless steel: For aluminium glazing frame.Aluman sheet infill 1.5 mm, stucco embossed: For aluminium glazing frame.PU sandwich infill – aluminium sheet cladding 16 mm, anodized two sides, smooth finish: For aluminium glazing frame.PU sandwich infill Aluman sheet clad, both sides stucco embossed 16 mm or 26 mm: For aluminium glazing frame.Ironmongery:Locking options – manual doors:Standard shoot bolt operation side or both sides.Foot latch.Internal/ external lock prepared for profile cylinder.Locking options – electric doors:Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.Dacromet finish for wet and marine environments.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL415865.pdf&pg=

An insulated sectional overhead door consisting of a combination of 500 mm and 375 mm deep or 750 mm and 625 mm deep double-skinned galvanized steel, horizontally ribbed door panels. The steel sections are horizontally profiled at 125 mm centres to match STE 40 and TPU 40 steel doors.

More about SPU 40:
As standard - Options

SPU 40
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
SPU 40 Double skinned insulated sectional door.
 Arrangement:
[High lift]. - Ref: H.
[High lift with inclination]. - Ref: HD.
[High lift with double radius (2 x 45°)]. - Ref: HS.
[High lift with low-level spring assembly]. - Ref: HU.
[Low headroom, with rear mounted spring assembly driven by front mounted hoist/ operator]. - Ref: L.
[Low headroom, with inclination, with front mounted spring assembly driven by front mounted hoist/ operator]. - Ref: LD.
[Normal lift]. - Ref: N.
[Normal lift with inclination]. - Ref: ND.
[Normal with minimum high lift]. - Ref: NH.
[Normal lift with double radius (2 x 45°)]. - Ref: NS.
[Vertical lift]. - Ref: V.
[Vertical lift with low-level spring assembly]. - Ref: VU.
 Size:
[ ______ ]
  -Width:
[1000 mm].
[2000 mm].
[3000 mm].
[5000 mm].
[8000 mm].
  -Height:
[1750 mm].
[2000 mm].
[2500 mm].
[5000 mm].
[7000 mm].
 Door panels:
[ ______ ]
  -External colour:
[Anthracite grey, RAL 7016].
[Azure blue, RAL 5009].
[Flame red, RAL 3000].
[Gentian blue, RAL 5010].
[Grey aluminium, RAL 9007].
[Leaf green, RAL 6002].
[Moss green, RAL 6005].
[Off white, RAL 9002].
[Rape yellow, RAL 1021].
[Terra brown, RAL 8028].
[Traffic white, RAL 9016].
[Ultramarine blue, RAL 5002].
[White, RAL 9010].
[White aluminium, RAL 9006].
 Glazing panels:
[??? rows of vision panels].
[Type A: Vision panels (635 x 245 mm) with synthetic or zinc die cast frame].
[Type C: Circular vision panels (244 mm diameter) with synthetic frame].
[Type D: Vision panels (602 x 132 mm) with synthetic frame].
[Type E: Vision panels (725 x 370 mm) with synthetic frame].
[Full width 52 mm aluminium glazing frame].
[Full width 91 mm aluminium glazing frame].
 Operation:
[Fast action operator].
[Single phase power].
[Three phase power].


top ^

Guidance

for SPU 40

from Hörmann (UK) Ltd

More about SPU 40: As standard - Options

As standard

Track system:

Galvanized steel track system with side frames shaped as hand guards:

Door panels:

Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.

Finish as delivered:

Polyester stucco embossed coating on both sides.

Internal colour:

Off white – RAL 9002.

Wind pressure:

To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.

Fire performance:

To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.

Manual opening force:

<260 N.

Performance (Power operated only):

Closing force:

<400 N.

Options

Glazing options:

  • 3 mm Clear synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.
  • 3 mm Crystal structured synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.
  • Clear synthetic double panes – 11, 16, 29, 31 or 33 mm: For compound window with zinc die-cast frame and for aluminium glazing frame.
  • Crystal structured synthetic double panes – 16 mm or 29 mm: For aluminium glazing frame.
  • 6 mm Clear polycarbonate pane, burglar proof and impact resistant: For aluminium glazing frame.
  • 16 mm Clear polycarbonate double pane, burglar proof and impact resistant: For compound window with zinc die-cast frame and for aluminium glazing frame.
  • 16 mm Double moulded unit: For aluminium glazing frame.
  • Expanded mesh, galvanized steel, powder coated: For aluminium glazing frame.
  • Perforated sheet – smooth stainless steel: For aluminium glazing frame.
  • Aluman sheet infill 1.5 mm, stucco embossed: For aluminium glazing frame.
  • PU sandwich infill – aluminium sheet cladding 16 mm, anodized two sides, smooth finish: For aluminium glazing frame.
  • PU sandwich infill Aluman sheet clad, both sides stucco embossed 16 mm or 26 mm: For aluminium glazing frame.

Ironmongery:

Locking options – manual doors:

  • Standard shoot bolt operation side or both sides.
  • Foot latch.
  • Internal/ external lock prepared for profile cylinder.

Locking options – electric doors:

  • Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

  • Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.
  • Dacromet finish for wet and marine environments.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017