A-Z Manufacturers (Hörmann (UK) Ltd) |  CAWS Index

HR120 Rolling Shutter

The HR120 is a single-skinned profile rolling shutter designed for tough everyday operation, manufactured from either 0.7 mm thick galvanized sheet steel, bright rolled aluminium or coil-coated aluminium.The HR120 Aero is available in Classic, Basic, or Manual rolling shutter options.Dimensions:Width (minimum): 500 mm.Width (maximum): 11750 mm.Height (maximum): 9000 mm.Performance:Doors to comply with BS EN 12604 (mechanical aspects) and BS EN 12453 (requirements for safety in use of power operated doors) with third party certification by recognized testing authority.Wind pressure to BS EN 12424:Class 3. Doors to achieve higher wind classes are available on request.Fire performance to DIN 4102:Door section element materials are Class B2 (normally flammability).Thermal insulation (Individual shutter profile):(4 x 4 m shutter, fitted): 5.8W/m²K.Arrangement:Vertical roller shutter.Frame/ Guides:Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.Locking options:Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Shutter security kit (standard on Basic and Manual Rolling Shutters).Other requirements:Vision panels:Transparent impact-resistant polycarbonate double panes: State number of rows.Ventilation grilles:State number of rows.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL137649.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL262508.pdf&pg=

The HR120 is a single-skinned profile rolling shutter designed for tough everyday operation, manufactured from either 0.7 mm thick galvanized sheet steel, bright rolled aluminium or coil-coated aluminium.

The HR120 Aero is available in Classic, Basic, or Manual rolling shutter options.

More about HR120 Rolling Shutter:
As standard - Options

HR120 Rolling Shutter
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
[HR120 Basic Rolling Shutter].
[HR120 Classic Rolling Shutter].
[HR120 Manual Rolling Shutter].
 Size:
[500 x 2500 mm].
[3000 x 3000 mm].
[5000 x 5000 mm].
[8000 x 8000 mm].
[11750 x 9000 mm].
 Shutter curtain:
  -Type:
[Bright rolled aluminium].
[Coil coated aluminium].
[Single skinned 0.7 mm galvanized sheet steel].
  -Finish:
[Coil-coated aluminium].
[Self-coloured aluminium].
[Self-coloured galvanized steel].
 Frame/ guides:
[2 mm thick galvanized steel side guides, complete with articulated windlock and integral brush seal].
[Galvanized steel anchor brackets].
[Galvanized steel height-adjustable brackets with mounting plate].
 Operation:
[Single phase power].
[Three phase power].


top ^

Guidance

for HR120 Rolling Shutter

from Hörmann (UK) Ltd

More about HR120 Rolling Shutter: As standard - Options

As standard

Dimensions:

  • Width (minimum): 500 mm.
  • Width (maximum): 11750 mm.
  • Height (maximum): 9000 mm.

Performance:

Doors to comply with BS EN 12604 (mechanical aspects) and BS EN 12453 (requirements for safety in use of power operated doors) with third party certification by recognized testing authority.

Wind pressure to BS EN 12424:

Class 3. Doors to achieve higher wind classes are available on request.

Fire performance to DIN 4102:

Door section element materials are Class B2 (normally flammability).

Thermal insulation (Individual shutter profile):

(4 x 4 m shutter, fitted): 5.8W/m²K.

Arrangement:

Vertical roller shutter.

Frame/ Guides:

Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.

Options

Locking options:

  • Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.
  • Shutter security kit (standard on Basic and Manual Rolling Shutters).

Other requirements:

Vision panels:

Transparent impact-resistant polycarbonate double panes: State number of rows.

Ventilation grilles:

State number of rows.

Further Information

Literature:



RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 14 December 2017