A-Z Manufacturers (Hörmann (UK) Ltd) |  CAWS Index

Decotherm Basic Thermally Insulated Rolling Shutter

A double-skinned thermally insulated rolling shutter.The skin is of electroplated special steel with high-grade coil coating both sides.An additional coat of protective paint with PA particles, also on both sides, helps reduce friction and the noise produced by the shutter action.The sandwich core is of 100% CFC-free PU rigid foam.Dimensions:Width (minimum): 1878 mm.Width (maximum): 4000 mm.Height (maximum): 4000 mm.Performance:Standards:BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.Wind pressure to BS EN 12424:Class 2, doors to achieve higher wind classes are available on request.Fire performance to DIN 4102:Door section element materials are Class B2. Thermal insulation (Individual shutter profile):3.8 W/m²K.Prevention of persons being lifted (Power operated only):Dead-man’s control or torque limit on impulse control.Shutter curtain:Double-skinned thermally insulated:Lath depth: 109 mm.Face material:Electroplated special steel with high-grade coil coating both sides.Core material:100% CFC-free PU rigid foam.Frame/ Guides:Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.Locking options:Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Hood:Required on all shutters and grilles under 2500 mm high.Hood finish:Galvanized or stainless steel.Vision/ Louvre Options:Rows of vision panels: (State number of rows – for rectangular or triangular panels).Transparent polycarbonate window, rectangular shaped.Transparent polycarbonate window, triangular shaped.‘Logistic’ (transparent polycarbonate window rectangular shaped – four either side).Ventilation grille, non-transparent, Anthracite grey, based on RAL 7016 (cross section approx 22 cm² per ventilation grille).

A double-skinned thermally insulated rolling shutter.

The skin is of electroplated special steel with high-grade coil coating both sides.

An additional coat of protective paint with PA particles, also on both sides, helps reduce friction and the noise produced by the shutter action.

The sandwich core is of 100% CFC-free PU rigid foam.

More about Decotherm Basic Thermally Insulated Rolling Shutter:
As standard - Options

Decotherm Basic Thermally Insulated Rolling Shutter
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Decotherm Basic Thermally Insulated Rolling Shutter.
 Size:
[1878 x 2500 mm].
[3000 x 3000 mm].
[4000 x 4000 mm].
 Arrangement:
[Vertical rolling shutter, face fixed].
[Vertical rolling shutter. Fixed between walls with additional posts].
 Finish:
[Galvanized steel].
[Galvanized steel, with polyester coil coating in off white - RAL 9002].
[Galvanized steel, with polyester coil coating in white aluminium – RAL 9006].
 Operation:
[Single phase power].
[Three phase power]. - Standard.
 Other requirements:
[ ______ ]


top ^

Guidance

for Decotherm Basic Thermally Insulated Rolling Shutter

from Hörmann (UK) Ltd

More about Decotherm Basic Thermally Insulated Rolling Shutter: As standard - Options

As standard

Dimensions:

  • Width (minimum): 1878 mm.
  • Width (maximum): 4000 mm.
  • Height (maximum): 4000 mm.

Performance:

Standards:

BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.

Wind pressure to BS EN 12424:

Class 2, doors to achieve higher wind classes are available on request.

Fire performance to DIN 4102:

Door section element materials are Class B2.

Thermal insulation (Individual shutter profile):

3.8 W/m²K.

Prevention of persons being lifted (Power operated only):

Dead-man’s control or torque limit on impulse control.

Shutter curtain:

Double-skinned thermally insulated:

Lath depth: 109 mm.

Face material:

Electroplated special steel with high-grade coil coating both sides.

Core material:

100% CFC-free PU rigid foam.

Frame/ Guides:

Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.

Options

Locking options:

  • Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

Hood:

Required on all shutters and grilles under 2500 mm high.

Hood finish:

Galvanized or stainless steel.

Vision/ Louvre Options:

  • Rows of vision panels: (State number of rows – for rectangular or triangular panels).
  • Transparent polycarbonate window, rectangular shaped.
  • Transparent polycarbonate window, triangular shaped.
  • ‘Logistic’ (transparent polycarbonate window rectangular shaped – four either side).
  • Ventilation grille, non-transparent, Anthracite grey, based on RAL 7016 (cross section approx 22 cm² per ventilation grille).

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017