A-Z Manufacturers (Hörmann (UK) Ltd) |  CAWS Index

Hormann V6030 SEL Flexible High Speed Door

The Hormann V6030 TRL is intended for highly-frequented transport routes, with crash-protection. External doors are driven into, e.g. by forklifts, more frequently than internal doors. This is where crash-protection pays off because it significantly reduces downtimes and repair costs. The high speeds at which the door opens and closes also save on energy costs.Spring steel wind lock in curtain pocket:The lateral twin rollers ensure quiet door travel and allow reliable stops. Wind loads of up to 100 km/h do not pose problems thanks to the spring steel wind protectors.Benefits:Doors to comply with BS EN 13241 encompassing BS EN 12604 (mechanical aspects).BS EN 12453 (requirements for safety in use of power operated doors) with 3rd Party Certification by recognized testing authority.Emergency opening via UPS (only in conjunction with BS150 FU E Controls).Wind pressure to BS EN 12424: Class 2.Manual opening force <260 N.Closing force <400 N.CE Marked with manufacturer’s declaration of conformity.Curtain:Fully transparent thickness 1.5 mm - Doors ≤ 25 m².Reinforced PVC 2.0 mm thick, Full width vision panel - Doors > 25 m²Soft edge profile with monitoring via a radio crash switch.Crash-protection with manual start-up/automatic re-feed.Curtain arrangement:Vertical Rolling. Face fixed.Door Speeds:- Inverter Controls BK 150 FU E:Maximum opening: 2.0 m/s.Maximum closing:0.8 m/s.- Inverter Controls BS 150 FU E H-UPS – Emergency opening:Maximum opening: 2.0 m/s.Maximum closing: 0.8 m/s.- Inverter Controls AS 400 FU E:Maximum opening: 3.0 m/s.Maximum closing: 0.8 m/s.Size range:Maximum. width (LDB) 5000 mm.Maximum height (LDH) 6000 mm.Operator, control and safety system:Self-monitoring safety light grille in the closing zone (maximum monitoring height approx 2500 mm).Direct Drive Motor IP54.Open-Close-Stop membrane keypad. Variable auto-time return.Integrated wind bar tensioning system.Accessories:Aluminium bottom seal profile for wind load in acc with EN 12424 up to class 2.

The Hormann V6030 TRL is intended for highly-frequented transport routes, with crash-protection. External doors are driven into, e.g. by forklifts, more frequently than internal doors. This is where crash-protection pays off because it significantly reduces downtimes and repair costs. The high speeds at which the door opens and closes also save on energy costs.

Spring steel wind lock in curtain pocket:

The lateral twin rollers ensure quiet door travel and allow reliable stops. Wind loads of up to 100 km/h do not pose problems thanks to the spring steel wind protectors.

Benefits:

  • Doors to comply with BS EN 13241 encompassing BS EN 12604 (mechanical aspects).
  • BS EN 12453 (requirements for safety in use of power operated doors) with 3rd Party Certification by recognized testing authority.
  • Emergency opening via UPS (only in conjunction with BS150 FU E Controls).
  • Wind pressure to BS EN 12424: Class 2.
  • Manual opening force <260 N.
  • Closing force <400 N.
  • CE Marked with manufacturer’s declaration of conformity.

More about Hormann V6030 SEL Flexible High Speed Door:
As standard - Options

Hormann V6030 SEL Flexible High Speed Door
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Hormann V6030 SEL.
 Curtain colours:
[RAL 1018]. - Zinc yellow
[RAL 2004]. - Pure orange
[RAL 3002]. - Carmine red
[RAL 5010]. - Gentian blue
[RAL 7038]. - Agate grey
 Control and safety options:
[None].
[External push button].
[Pull Cord].
[Remote Control].
[Presence and Motion Radar].
[Induction Loops]. - Vehicle detection
[Traffic Lights].
[Concealed light grid in door guide].
[Additional Safety beams].
[Mains isolator switch].
[Single Phase 230 Volt Frequency inverter control]. - 7-segment function display
[Three Phase 400 Volt Frequency inverter control]. - 7-segment function display
 Emergency opening:
[Crank handle].
[Chain hoist].
 Canopies:
[Galvanized steel].
[Stainless Steel Sloping].
[Square Canopy for barrel and motor].
 Accessories:
[None].
[Galvanized steel guides with removable side covers for easy maintenance and brush seals].
[Galvanized steel guides coated in RAL, colour].
[Stainless Steel V2A Polished guides].
[Aluminium bottom seal profile].


top ^

Guidance

for Hormann V6030 SEL Flexible High Speed Door

from Hörmann (UK) Ltd

More about Hormann V6030 SEL Flexible High Speed Door: As standard - Options

As standard

Curtain:

  • Fully transparent thickness 1.5 mm - Doors ≤ 25 m².
  • Reinforced PVC 2.0 mm thick, Full width vision panel - Doors > 25 m²
  • Soft edge profile with monitoring via a radio crash switch.
  • Crash-protection with manual start-up/automatic re-feed.

Curtain arrangement:

Vertical Rolling. Face fixed.

Door Speeds:

- Inverter Controls BK 150 FU E:

  • Maximum opening: 2.0 m/s.
  • Maximum closing:0.8 m/s.

- Inverter Controls BS 150 FU E H-UPS – Emergency opening:

  • Maximum opening: 2.0 m/s.
  • Maximum closing: 0.8 m/s.

- Inverter Controls AS 400 FU E:

  • Maximum opening: 3.0 m/s.
  • Maximum closing: 0.8 m/s.

Size range:

  • Maximum. width (LDB) 5000 mm.
  • Maximum height (LDH) 6000 mm.

Operator, control and safety system:

  • Self-monitoring safety light grille in the closing zone (maximum monitoring height approx 2500 mm).
  • Direct Drive Motor IP54.
  • Open-Close-Stop membrane keypad. Variable auto-time return.
  • Integrated wind bar tensioning system.

Options

Accessories:

Aluminium bottom seal profile for wind load in acc with EN 12424 up to class 2.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017