A-Z Manufacturers (HAG - The Door Specialists ) |  CAWS Index

View larger image of Seceuro CD150 Built On Roller Shutters from HAG - The Door Specialists Roller shutter Seceuro CD150 Built On

Seceuro CD150 built on roller shutters, double skin foam filled aluminium slat, vented as standard but also available non-vented.Applications:Domestic/ commercial windows. Doors.Serveries.Cabinets.Shutter box: - Dimensions (nominal):40 mm high x 9 mm thick. - Construction:Roll formed aluminium in two sections; top and bottom boxes.Bottom box removable for installation and maintenance and chamfered at 45°.The shutter box is assembled on die cast aluminium endplates. - Weight:4.5 kg/m².Guide rails:Extruded aluminium with an integral box section for reinforcement and to facilitate fixing. High density6 mm pile brush seals for quiet and smooth operation. 53 x 25 mm (w x d).Security level:Medium to low security.Rod crank operation:For shutters up to 25 kg. Incorporates a geared rod crank handle 1500 mm long which hangs vertically and secures into a clip when not in use. The gear is installed in the box and the gear ratio varies with shutter weight.Spring loading:A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.Swivel belt winder:For shutters up to 15 kg. The swivel winder coils the belt when it is pulled to open the shutter. The belt is 14 mm wide and grey in colour. External shutters are supplied with a guide tube to protect the belt through the building wall.Geared belt winder:For shutters between 15–25 kg. 1:3 ratio with removable handle for belt operated shutters. Single phase electric provision of a 13 A fused spur is required for installation. A tubular motor within the barrel assembly with limit switches and the thermal cut out to prevent overheating. Draw240 V and 0.5–2.5 A dependent upon the shutter size.Control:Standard security keyswitch or rocker switch. Other controls are available on request.Override:A manual override should be priced and ordered separately for shutters which are to be installed on exit doorways to permit operation in the event of a power failure. This is usually operable from only one side.

Seceuro CD150 built on roller shutters, double skin foam filled aluminium slat, vented as standard but also available non-vented.

Applications:

  • Domestic/ commercial windows.
  • Doors.
  • Serveries.
  • Cabinets.

More about Roller shutter Seceuro CD150 Built On:
As standard - Options

Roller shutter Seceuro CD150 Built On
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Seceuro CD150 Built On Roller Shutters.
 Opening height:
[1600 mm]. - Box size: 165 mm.
[2000 mm]. - Box size: 165 mm.
[2800 mm]. - Box size: 165 mm.
 Width:
[ ______ ] - Maximum: 3400 mm. Insert requirements.
 Finish:
  -Box:
[ ______ ] - White or dark brown as standard. The box can be powder coated to alternative standard RAL or BS colours at an extra cost.
  -Guide rail:
[ ______ ] - White or dark brown as standard. The guide rails can be powder coated to alternative standard RAL or BS colours at an extra cost.
  -Shutter:
[Brown].
[Cream].
[White].
[Wood grain effect].
  -Bottom slat:
[Dark brown].
[White].
 Controls:
[ ______ ] - Consult manufacturer and insert requirements.


top ^

Guidance

for Roller shutter Seceuro CD150 Built On

from HAG - The Door Specialists

More about Roller shutter Seceuro CD150 Built On: As standard - Options

As standard

Shutter box:

- Dimensions (nominal):

40 mm high x 9 mm thick.

- Construction:

  • Roll formed aluminium in two sections; top and bottom boxes.
  • Bottom box removable for installation and maintenance and chamfered at 45°.
  • The shutter box is assembled on die cast aluminium endplates.

- Weight:

4.5 kg/m².

Guide rails:

Extruded aluminium with an integral box section for reinforcement and to facilitate fixing. High density6 mm pile brush seals for quiet and smooth operation. 53 x 25 mm (w x d).

Security level:

Medium to low security.

Options

Rod crank operation:

For shutters up to 25 kg. Incorporates a geared rod crank handle 1500 mm long which hangs vertically and secures into a clip when not in use. The gear is installed in the box and the gear ratio varies with shutter weight.

Spring loading:

A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.

Swivel belt winder:

For shutters up to 15 kg. The swivel winder coils the belt when it is pulled to open the shutter. The belt is 14 mm wide and grey in colour. External shutters are supplied with a guide tube to protect the belt through the building wall.

Geared belt winder:

For shutters between 15–25 kg. 1:3 ratio with removable handle for belt operated shutters. Single phase electric provision of a 13 A fused spur is required for installation. A tubular motor within the barrel assembly with limit switches and the thermal cut out to prevent overheating. Draw240 V and 0.5–2.5 A dependent upon the shutter size.

Control:

Standard security keyswitch or rocker switch. Other controls are available on request.

Override:

A manual override should be priced and ordered separately for shutters which are to be installed on exit doorways to permit operation in the event of a power failure. This is usually operable from only one side.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 12 December 2017