A-Z Manufacturers (HAG - The Door Specialists ) |  CAWS Index

View larger image of Armourguard Industrial C1 from HAG - The Door Specialists Industrial Roller Shutter - Armourguard Industrial C1

The Armourguard Industrial C1 is a solid steel single skin roller shutter. The C1 door is capable of many design variations to suit site requirements of ventilation and vision; this is achieved by incorporating a section of Armourguard N2M (punched) or P2 (perforated) whilst retaining its high quality security level. This model incorporates solid 76 mm curved galvanized steel sections available in three thicknesses to suit the size of opening and security level.Usage:The Armourguard Industrial C1 is most commonly used on industrial door applications, where strength and budget is the priority such as industrial premises loading bay doors, warehouse doors, car parks, agriculture premises and industrial units.Maximum width:12 m.Dimensions:76 x 0.71 mm (dependent on application size).Weight:9.34 kg/ m² (dependent on application size).Finish:Galvanized bright rolled carbon steel, polyester powder coat colours are available.Shutter box: - Construction:Manufactured from 0.91 mm bright spangle galvanized pressed steel coil casing available in various different designs to suit individual circumstances.- Box sizes:Overall height (top of box):Up to 3500 mm: Box size 350 mm.Up to 4250 mm: Box size 375 mm.Up to 5250 mm: Box size 400 mm.Up to 6000 mm: Box size 450 mm.Up to 8000 mm: Box size 600 mm.On larger widths the box sizes may move up one size due to deflection.Guide rail: - Construction:50 x 32 x 3 – 100 x 32 x 3 mm (dependent on width). - Finish:Galvanized steel; standard polyester powder coat colours are available.Operation: - Three phase electric:Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, complete with haul chain override for use in the event of power failure. Safety brakes are used to prevent the roller shutter from closing in the event of motor failure in line with EU legislation. Electrical requirements are dependent on usage, further details on request.- Override:A chain override is included to operate the shutter in the event of a power failure. This is only operable from one side. High level hand crank override can be specified if required.- Three phase electric:Design of this model will alter for three phase operation. Electrical requirements are dependent on usage, further details on request.- Override:A manual override is included to operate the shutter in the event of a power failure. This is usually only operable from only one side.- Hand chain operation:A counter balanced helical spring controlled via hand chain and chain lock to secure the C1 industrial door. A double spring unit is incorporated into the barrel assembly inline as a second device to prevent the roller shutter from closing in the event of single spring failure in line with EU legislation.- Control:Electric operation is via a standard push button control. Other controls are available on request. Further safety devices are available, dependent on requirements and operational circumstances.

The Armourguard Industrial C1 is a solid steel single skin roller shutter. The C1 door is capable of many design variations to suit site requirements of ventilation and vision; this is achieved by incorporating a section of Armourguard N2M (punched) or P2 (perforated) whilst retaining its high quality security level. This model incorporates solid 76 mm curved galvanized steel sections available in three thicknesses to suit the size of opening and security level.

Usage:

The Armourguard Industrial C1 is most commonly used on industrial door applications, where strength and budget is the priority such as industrial premises loading bay doors, warehouse doors, car parks, agriculture premises and industrial units.

More about Industrial Roller Shutter - Armourguard Industrial C1:
As standard - Options

Industrial Roller Shutter - Armourguard Industrial C1
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Industrial C1.
 Size (w x h):
[ ______ ] - Insert requirements.
 Finish:
  -Shutter:
[ ______ ] - Insert requirements.
  -Shutter Box:
[ ______ ] - Insert requirements.


top ^

Guidance

for Industrial Roller Shutter - Armourguard Industrial C1

from HAG - The Door Specialists

More about Industrial Roller Shutter - Armourguard Industrial C1: As standard - Options

As standard

Maximum width:

12 m.

Dimensions:

76 x 0.71 mm (dependent on application size).

Weight:

9.34 kg/ m² (dependent on application size).

Finish:

Galvanized bright rolled carbon steel, polyester powder coat colours are available.

Shutter box:

- Construction:

Manufactured from 0.91 mm bright spangle galvanized pressed steel coil casing available in various different designs to suit individual circumstances.

- Box sizes:

Overall height (top of box):

  • Up to 3500 mm: Box size 350 mm.
  • Up to 4250 mm: Box size 375 mm.
  • Up to 5250 mm: Box size 400 mm.
  • Up to 6000 mm: Box size 450 mm.
  • Up to 8000 mm: Box size 600 mm.
  • On larger widths the box sizes may move up one size due to deflection.

Guide rail:

- Construction:

50 x 32 x 3 – 100 x 32 x 3 mm (dependent on width).

- Finish:

Galvanized steel; standard polyester powder coat colours are available.

Options

Operation:

- Three phase electric:

Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, complete with haul chain override for use in the event of power failure. Safety brakes are used to prevent the roller shutter from closing in the event of motor failure in line with EU legislation. Electrical requirements are dependent on usage, further details on request.

- Override:

A chain override is included to operate the shutter in the event of a power failure. This is only operable from one side. High level hand crank override can be specified if required.

- Three phase electric:

Design of this model will alter for three phase operation. Electrical requirements are dependent on usage, further details on request.

- Override:

A manual override is included to operate the shutter in the event of a power failure. This is usually only operable from only one side.

- Hand chain operation:

A counter balanced helical spring controlled via hand chain and chain lock to secure the C1 industrial door. A double spring unit is incorporated into the barrel assembly inline as a second device to prevent the roller shutter from closing in the event of single spring failure in line with EU legislation.

- Control:

Electric operation is via a standard push button control. Other controls are available on request. Further safety devices are available, dependent on requirements and operational circumstances.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017