A-Z Manufacturers (Dagard SAS) |  CAWS Index

View larger image of SD90 from Dagard SASSD90

Modular partition manufactured from a metallic stud frame and two individually removable skinned panels, allowing the easy incorporation of any services routing, wiring or components.Partition overall thickness: 90 mm (standard), can be increased to suit project requirements.Airtightness is achieved by a bead of mastic (clean room grade silicone caulk, MS Polymer, chemical cold weld) applied on site in the calibrated gaps for all skins.Components:The galvanized steel structural frame consists of:Metallic rails (top and bottom).Proprietary vertical notched metallic studs adjustable in height, placed every 1100 or 1200 mm (optional sub-module).Noggins, cross-members and specific accessories available for incorporation of doors, glazing or specific equipment.Removable cladding:Metallic single or double sided panels.Finished cladding manufactured from thick galvanized steel sheets (0.8 mm), backed with plasterboard/ gypsum wall board (GWB) or aluminium honeycomb core; total thickness 18 mm. Vertically clipped on the studs, with a pre-set gap of 3 mm provided for silicone caulk (gap 0.5 mm for cold welded seal).Doors:Hinged or sliding doors, with one or two leaves available with:A wide range of sizes.Aluminium or lacquered steel door frame (heat-cured epoxy-polyester powder paint, choice of colour).Stainless steel variant set flush on one side or the other, or centred in the partition thickness.Leaves of thickness 60 mm with metallic or high pressure laminate (HPL) facings, choice of colour.Optionally available glazed or flush vision panel, selection of hardware, interlocking management, motorized system and kick plate protection.Glazed modules:Airtight double glass window system with toughened laminated safety glass, double flush.Dimensions on request according to the partition layout.Optional integrated (flush) manual or electrical blinds available.Single size lining partition or two lift panels are optionally available.Module width:1100 mm.

Modular partition manufactured from a metallic stud frame and two individually removable skinned panels, allowing the easy incorporation of any services routing, wiring or components.

Partition overall thickness: 90 mm (standard), can be increased to suit project requirements.

Airtightness is achieved by a bead of mastic (clean room grade silicone caulk, MS Polymer, chemical cold weld) applied on site in the calibrated gaps for all skins.

Components:

The galvanized steel structural frame consists of:

  • Metallic rails (top and bottom).
  • Proprietary vertical notched metallic studs adjustable in height, placed every 1100 or 1200 mm (optional sub-module).
  • Noggins, cross-members and specific accessories available for incorporation of doors, glazing or specific equipment.

Removable cladding:

  • Metallic single or double sided panels.
  • Finished cladding manufactured from thick galvanized steel sheets (0.8 mm), backed with plasterboard/ gypsum wall board (GWB) or aluminium honeycomb core; total thickness 18 mm. Vertically clipped on the studs, with a pre-set gap of 3 mm provided for silicone caulk (gap 0.5 mm for cold welded seal).

Doors:

Hinged or sliding doors, with one or two leaves available with:

  • A wide range of sizes.
  • Aluminium or lacquered steel door frame (heat-cured epoxy-polyester powder paint, choice of colour).
  • Stainless steel variant set flush on one side or the other, or centred in the partition thickness.
  • Leaves of thickness 60 mm with metallic or high pressure laminate (HPL) facings, choice of colour.
  • Optionally available glazed or flush vision panel, selection of hardware, interlocking management, motorized system and kick plate protection.

Glazed modules:

  • Airtight double glass window system with toughened laminated safety glass, double flush.
  • Dimensions on request according to the partition layout.
  • Optional integrated (flush) manual or electrical blinds available.

Single size lining partition or two lift panels are optionally available.

More about SD90:
As standard

SD90
 Manufacturer:
Dagard SAS.
  -Web:www.dagard.com/gb/.
  -Tel:+33 (0)555 824000.
  -Product reference:
SD90.
 Height:
[ ______ ] - 3000 mm (maximum). Stackable if required. Consult manufacturer and insert requirements.
 Cladding:
  -Type:
[Double sided].
[Single sided].
  -Material/ Finish:
[Galvanized steel 8/10th plus PET 55 µm, iceberg white colour (similar to RAL 9010)].
[Stainless steel sheet 8/10th].
[Stainless steel sheet 8/10th plus antibacterial PVC film 150 µm].
[Stainless steel sheet 8/10th plus PVC and PET film 130 µm].
 Doors:
  -Type:
[Hinged].
[Sliding].
  -Leaf:
[One].
[Two].
  -Material:
[ ______ ] - Consult manufacturer and insert requirements.
  -Colour/ Finish:
[ ______ ] - Consult manufacturer and insert requirements.
  -Vision panel:
[Not required].
[Flush].
[Glazed].
  -Accessories:
[Not required].
[Hardware].
[Interlocking management].
[Kick plate protection].
[Motorized system].
 Glazing:
  -Size:
[ ______ ] - Consult manufacturer and insert requirements.
  -Blinds:
[Not required].
[Electric].
[Manual].
 Accessories/ Other requirements:
[None].
[Cross-members].
[Noggins].
[Single size lining partition]. - Consult manufacturer and insert requirements.
[Sub-module]. - Consult manufacturer and insert requirements.
[Two lift panels]. - Consult manufacturer and insert requirements.


top ^

Guidance

for SD90

from Dagard SAS

More about SD90: As standard

As standard

Module width:

1100 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Dagard SAS from ribaproductselector.com.

Contacts:

www.dagard.com/gb/

T: +33 (0)555 824000

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017