A-Z Manufacturers (Dagard SAS) |  CAWS Index

View larger image of SD100 from Dagard SASSD100

A walkable modular ceiling, 100 mm thick, which consists of metallic structure profiles and removable cladding (cassettes), allowing initial or future incorporation of cables or other equipment such as light fittings or heating, ventilation and air conditioning (HVAC) terminals.Structural bearers are manufactured from lacquered steel sheet, with a 100 x 60 mm section and a modular span of 1100 or 1200 mm. They are regularly pre-punched on the edge for perpendicular cable routing. Brackets for suspension by M10 rods are integrated every 2400/ 1100 or 1200 mm. Permitted load uniformly distributed UDL: 2.5 KN/m².Lower cladding:The lower cladding is manufactured from lacquered steel, 0.8 mm thick and clamped on the structural bearers.Modular width: 600 or 900 mm.Span: 1200 mm.Cassette size: 600 x 1100 mm or 900 x 1100 mm.System totally flush on under part of the bearers.Pre-cutting for component incorporation is prefabricated off -site.Various finishes available including:Polyester lacquer 25 microns, iceberg white colour (similar to RAL 9010).PET complex 55 microns, iceberg white colour (similar to RAL 9010).Upper cladding:Galvanized steel, 2 mm thick, secured on the structural bearers, independently removable.Modular width: 600 or 900 mm.Span: 1200 mm.Cassette size: 600 x 1100 mm or 900 x 1100 mm.Pre-cutting for incorporation is prefabricated off site.Air-tightness:Airtightness by mastic (silicone caulk, MS Polymer, etc.).Upper joint cover totally flush.Light fitting modules:A set of flush light fittings with lamps or LED totally integrated into a ceiling cassette. The fitting is accessible from the rear part of the ceiling for maintenance purposes. A wide choice of lighting components and designs plus safety options are available. Consult manufacturer for details.HVAC terminal modules:Specific ceiling modules are available for the integration of totally flush HVAC equipment such as air entrance or extraction terminals with or without filters. Consult manufacturer for details.

A walkable modular ceiling, 100 mm thick, which consists of metallic structure profiles and removable cladding (cassettes), allowing initial or future incorporation of cables or other equipment such as light fittings or heating, ventilation and air conditioning (HVAC) terminals.

Structural bearers are manufactured from lacquered steel sheet, with a 100 x 60 mm section and a modular span of 1100 or 1200 mm. They are regularly pre-punched on the edge for perpendicular cable routing. Brackets for suspension by M10 rods are integrated every 2400/ 1100 or 1200 mm. Permitted load uniformly distributed UDL: 2.5 KN/m².

Lower cladding:

  • The lower cladding is manufactured from lacquered steel, 0.8 mm thick and clamped on the structural bearers.
  • Modular width: 600 or 900 mm.
  • Span: 1200 mm.
  • Cassette size: 600 x 1100 mm or 900 x 1100 mm.
  • System totally flush on under part of the bearers.
  • Pre-cutting for component incorporation is prefabricated off -site.

Various finishes available including:

  • Polyester lacquer 25 microns, iceberg white colour (similar to RAL 9010).
  • PET complex 55 microns, iceberg white colour (similar to RAL 9010).

Upper cladding:

  • Galvanized steel, 2 mm thick, secured on the structural bearers, independently removable.
  • Modular width: 600 or 900 mm.
  • Span: 1200 mm.
  • Cassette size: 600 x 1100 mm or 900 x 1100 mm.
  • Pre-cutting for incorporation is prefabricated off site.

Air-tightness:

  • Airtightness by mastic (silicone caulk, MS Polymer, etc.).
  • Upper joint cover totally flush.

Light fitting modules:

A set of flush light fittings with lamps or LED totally integrated into a ceiling cassette. The fitting is accessible from the rear part of the ceiling for maintenance purposes. A wide choice of lighting components and designs plus safety options are available. Consult manufacturer for details.

HVAC terminal modules:

Specific ceiling modules are available for the integration of totally flush HVAC equipment such as air entrance or extraction terminals with or without filters. Consult manufacturer for details.

SD100
 Manufacturer:
Dagard SAS.
  -Web:www.dagard.com/gb/.
  -Tel:+33 (0)555 824000.
  -Product reference:
SD100.
 Cassette size:
[600 x 1100 mm].
[900 x 1100 mm].
 Finish:
[ ______ ]
 Accessories/ Other requirements:
[None].
[Grid ceiling frame work with crossed noggins].
[HVAC terminal].
[Light fitting module].
[Non-walkable ceiling variant (without upper cladding)].
[Optional infill]. - To improve acoustic or thermal performance; consult manufacturer for details.


top ^

Guidance

for SD100

from Dagard SAS

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Dagard SAS from ribaproductselector.com.

Contacts:

www.dagard.com/gb/

T: +33 (0)555 824000

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017