A-Z Manufacturers (Bolton Gate Co Ltd) |  CAWS Index

View larger image of Eurofold Folding Shutter Doors from Bolton Gate Co LtdEurofold Folding Shutter Doors

Available in single or in pairs, manual or electrically operated and designed for internal and external commercial applications. They are capable of withstanding vehicle collision, ram-raid attacks and severe wind conditions. Gate frame:Formed from galvanized steel double channel vertical pickets, 1.2 mm thick, interconnected by 2 mm thick galvanized cold formed lattice bars. The gate frame is top hung from a ball bearing pulley connected to the picket by zinc plated pulley brackets. At the bottom, the frame is fitted with zinc plated bottom guide pieces designed to run in a bottom track.Leading edge: The high security leading edge strengthens the shutter further and is manufactured from a galvanized steel section which incorporates pull handles. A draught excluding overlapping section is provided. Shutter leaves: 305 mm wide x 1.2 mm thick full height galvanized steel, with 3 mm diameter strengthening wires and securely capped galvanized steel hinge strips, to provide a continuously interlocking, weather-tight elevation.Top track:The standard top track is constructed from 2 galvanized steel sections, 90 mm deep.Bottom track:The bottom guide pieces are retained within a 3 mm thick galvanized steel ‘M’ shaped bottom track, chased into the floor. Chase: 150 mm wide x 75 mm deep.Cover plate:A galvanized steel weather cover panel is provided over the top of the shutter leaves which is bolted to the top track and supported by straps to give security and weather protection.End panels:For doors fixed behind and bunching clear of the opening, a galvanized steel draught resistant closer is provided. For increased security, single doors close onto a 25 mm x 26 mm galvanized steel slam channel fixed full height to the opening structure.Weight: Approximately 32 kg/m².Speed of operation for electric doors: 200 mm/second/door leaf.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL502184.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL519197.pdf&pg=

Available in single or in pairs, manual or electrically operated and designed for internal and external commercial applications. They are capable of withstanding vehicle collision, ram-raid attacks and severe wind conditions.

Gate frame:

Formed from galvanized steel double channel vertical pickets, 1.2 mm thick, interconnected by 2 mm thick galvanized cold formed lattice bars. The gate frame is top hung from a ball bearing pulley connected to the picket by zinc plated pulley brackets. At the bottom, the frame is fitted with zinc plated bottom guide pieces designed to run in a bottom track.

Leading edge:

The high security leading edge strengthens the shutter further and is manufactured from a galvanized steel section which incorporates pull handles. A draught excluding overlapping section is provided.

Shutter leaves:

305 mm wide x 1.2 mm thick full height galvanized steel, with 3 mm diameter strengthening wires and securely capped galvanized steel hinge strips, to provide a continuously interlocking, weather-tight elevation.

Top track:

The standard top track is constructed from 2 galvanized steel sections, 90 mm deep.

Bottom track:

The bottom guide pieces are retained within a 3 mm thick galvanized steel ‘M’ shaped bottom track, chased into the floor. Chase: 150 mm wide x 75 mm deep.

Cover plate:

A galvanized steel weather cover panel is provided over the top of the shutter leaves which is bolted to the top track and supported by straps to give security and weather protection.

End panels:

For doors fixed behind and bunching clear of the opening, a galvanized steel draught resistant closer is provided. For increased security, single doors close onto a 25 mm x 26 mm galvanized steel slam channel fixed full height to the opening structure.

More about Eurofold Folding Shutter Doors:
As standard

Eurofold Folding Shutter Doors
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Eurofold.
 Size:
[10 x 7 m]. - Single doors.
[20 x 7 m]. - Pairs of doors.
 Arrangement:
[Bi-parting bunching].
[Single bunching, left hand side].
[Single bunching, right hand side].
 Operation:
[Manual].
[415V, 3 phase, 50 Hz electric motor].
 Finish:
[Polyester powder coated].
[Standard galvanized finish, Primer painted to non-galvanized components].


top ^

Guidance

for Eurofold Folding Shutter Doors

from Bolton Gate Co Ltd

More about Eurofold Folding Shutter Doors: As standard

As standard

Weight:

Approximately 32 kg/m².

Speed of operation for electric doors:

200 mm/second/door leaf.

Further Information

Literature:



RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017