A-Z Manufacturers (BIS Door Systems Ltd) |  CAWS Index

View larger image of Roller Shutter Doors - Industrial from BIS Door Systems LtdRoller Shutter Doors - Industrial

Roller shutters providing access and security solutions to loading bays, goods stores, car park entrances and other high usage applications. They are available as either manually or electronically operated and a range of curtain and accessory options are available. The shutters include a shutter curtain, a roller barrel to house the curtain, end plates to support the roller barrel assembly and side guide channels.Finish:Galvanized steel. Other finishes can be applied by special order, such as powder coating to any BS or RAL colour or a plastisol finish to one side from the HSP200 range. Contact manufacturer for more information.Size:Larger sizes can be requested by special order, contact manufacturer for more details.Operation:- Electric, three phase:For industrial applications which require frequent usage. All components are identical to the manually operated door, except for a three phase, 415 V AC motor instead of a hand chain wheel drive mechanism. Actuation is via an up, down and stop push button station and a manual override continuous haul chain is provided as standard in the event of power failure. - Manual, hand chain:For smaller apertures which require less frequent usage. The curtain of the door is manually raised via a continuous haul chain which drives the fully sprung, counter balanced roller barrel assembly. The roller barrel assembly is suspended by mild steel end plates.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=01074&f=COL718912.pdf&pg=

Roller shutters providing access and security solutions to loading bays, goods stores, car park entrances and other high usage applications. They are available as either manually or electronically operated and a range of curtain and accessory options are available. The shutters include a shutter curtain, a roller barrel to house the curtain, end plates to support the roller barrel assembly and side guide channels.

More about Roller Shutter Doors - Industrial:
As standard - Options

Roller Shutter Doors - Industrial
 Manufacturer:
BIS Door Systems Ltd.
  -Web:www.bis-doors.co.uk.
  -Tel:+44 (0)1268 767566.
  -Product reference:
Roller Shutter Doors - Industrial.
 Size:
[ ______ ] - Insert requirement, available up to 9000 mm high and 9000 mm wide.
 Operation:
[Electric, three phase]. - For frequent usage.
[Manual, hand chain]. - For less frequent usage.
 Curtain:
  -Type:
[76 mm galvanized steel solid concave lath]. - Standard, for most applications.
[50 mm galvanized steel flat lath]. - For most applications.
[76 mm galvanized steel perforated concave lath]. - For most applications.
[76 mm galvanized steel plastisol concave lath]. - For most applications.
[Insulated galvanized steel lath]. - For temperature control, with 20 mm thick polystyrene infill.
  -Thickness:
[Not applicable]. - For Insulated galvanized steel lath.
[18 gauge]. - Not available with 50 mm galvanized steel flat lath.
[20 gauge].
[22 gauge].
 Actuation/ Safety systems:
[Not applicable]. - For manual operation.
[Manufacturer's standard].
[Induction loop].
[Radar detector].
[Radio control].
[Photocell].
[Photocell].
 Side guides:
[Manufacturer's standard].
[Windlock]. - For doors above 4500 mm wide or subject to high wind loading.
 Accessories:
[None].
[Bullet locks]. - For manual doors.
[Casing box]. - To conceal the coil assembly.
[Centre locks]. - For manual doors.
[Front fascia panel]. - To conceal the coil assembly.
[Grille locks]. - For manual doors.
[Ground unit locks]. - For manual doors.
[Interlock switch]. - For electronically operated, to disengage the power in a locked position.
[Lateral locks]. - For manual doors.
[Nylon brush strip seals]. - For fitting along guide channels and at soffit level.
[Rubber extrusion floor seal]. - To help prevent the ingress of water.
[Shoot bolts]. - For manual doors.
[Soffit panel]. - To conceal the coil assembly.
[Wicket door]. - For pedestrian access when curtain is lowered.


top ^

Guidance

for Roller Shutter Doors - Industrial

from BIS Door Systems Ltd

More about Roller Shutter Doors - Industrial: As standard - Options

As standard

Finish:

Galvanized steel. Other finishes can be applied by special order, such as powder coating to any BS or RAL colour or a plastisol finish to one side from the HSP200 range. Contact manufacturer for more information.

Options

Size:

Larger sizes can be requested by special order, contact manufacturer for more details.

Operation:

- Electric, three phase:

For industrial applications which require frequent usage. All components are identical to the manually operated door, except for a three phase, 415 V AC motor instead of a hand chain wheel drive mechanism. Actuation is via an up, down and stop push button station and a manual override continuous haul chain is provided as standard in the event of power failure.

- Manual, hand chain:

For smaller apertures which require less frequent usage. The curtain of the door is manually raised via a continuous haul chain which drives the fully sprung, counter balanced roller barrel assembly. The roller barrel assembly is suspended by mild steel end plates.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for BIS Door Systems Ltd from ribaproductselector.com.

Contacts:

www.bis-doors.co.uk

sales@bis-doors.co.uk

T: +44 (0)1268 767566

F: +44 (0)1268 560284

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017