A-Z Manufacturers (ASSA ABLOY Entrance Systems Ltd - Industrial) |  CAWS Index

View larger image of Crawford 542 Overhead Sectional Door from ASSA ABLOY Entrance Systems Ltd - IndustrialCrawford OH1042P Overhead Sectional Door

A robust, well-insulated and space-saving door for the outer walls of industrial premises. For use in applications like warehouses, logistics centres and all kinds of production plants. The sectional door slides up under the roof when opened, allowing free space around the door opening and leaving it completely free. Size:Maximum: 8000 x 6000 mm.Fittings:Shot blasted counterbalance springs, mounted on a galvanized, hexagonal shaft, installed at low level.Spring and cable break anti-drop devices.Anti lift device.Flush hinges and roller brackets.Inset lifting handle.EPDM perimeter and horizontal joint seals.Finger pinch protection to horizontal joints. Door panels: 545 mm deep, 42 mm thick process laminated steel panels with internal steel bands and insulated with CFC free polyurethane. Panel design incorporates a unique diamond design to external surface of the outer face.Ironmongery:Internal sliding shootbolt with interlocked micro switch to prevent motor and door damagePerformance: EN 12424 Wind resistance (Class 3).EN 12425 Water penetration Class 3 – 70 Pa resistance.EN 12426 Air permeability ( Class 3).Fire resistance performance to DIN 4102.Arrangement: Size (width x height): Insert details.Operation:- Electrical:Operating voltage: 230 V AC, 50/60 Hz.Fuse: 10 A.Brake: Non-reversible worm gear.Speed monitor: Electronic monitoring.Limit switch: Electronic via torque.Gears: Worm gear 1750 RPM yields approximately 24 rotations door shaft.Direct drive system.No special wall reinforcement necessary.Temperature range: -20°C to 60°C.Soft stop, soft start.Connection using "CEE plug" or lockable mains isolator.Maximum door weight 400 kg.- Control unit:Output 0.37 kW, input 230 V. Including control unit with standard actuator Up-Stop- Down. The door closes using dead-man controls.Operating speed 0.25 m/s, safety rating IP 55. If there is a power failure, the disengage device enables manual operation at any time.Radio remote control.Open (if open button is used during closing process - door immediately stops and opens completely).Automatic close (safety photo cell compulsory requirement).Door closes automatically after set period (4–60 seconds).Pull switch for opening function.External push-button, key switch.Door/ bridge interlock.Windows:1 row DAOP, double acrylic in a polycarbonate frame with rounded ends, internal dimensions 610 x 292 mm.1 row DARP, double acrylic in a polycarbonate rectangular frame, internal dimensions 604 x 292 mm.1 full width row of satin anodized, aluminium framed, glazed with double acrylic.1 full width row of satin anodized, aluminium framed, glazed with 4 mm hardened glass.Other requirements: External/ internal security cylinder lock set into the door panel.Integral outward opening personnel door, complete with low profile threshold, self closer, satin anodised aluminium frame with mitred corners, lever handles and cylinder lock (Euro cylinder).Micro switch to provide an interlock (electrically operated doors only). Ventilators.0Secured By Design

A robust, well-insulated and space-saving door for the outer walls of industrial premises. For use in applications like warehouses, logistics centres and all kinds of production plants. The sectional door slides up under the roof when opened, allowing free space around the door opening and leaving it completely free.

More about Crawford OH1042P Overhead Sectional Door:
As standard - Options - Approvals

Crawford OH1042P Overhead Sectional Door
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford OH1042P Overhead Sectional Door.
 Size:
[As drawing].
[As schedule].
 Track system:
[2 piece, galvanized tracks complete with 25 mm thermal movement provision].
[High Lift (HL)].
[Inclined roof tracks].
[Low Lift (LL)].
[Standard Lift (SL)].
[Vertical Lift (VL)].
 Door leaf:
  -Internal finish:
[Pre-coated polyester RAL9002].
  -External finish:
[PS 24W/ RAL 3002 Carmine Red].
[PS 28W/ RAL 1021 Rape Yellow].
[PS 20W/ RAL 5010 Gentian Blue].
[PS 38W/ RAL 7016 Anthracite Grey].
[PS 21W/ RAL 9010 Pure White].
[PS 23W/ RAL 9002 Off White].
[PS 25W/ RAL 9006 Metallic Silver].
[PS 29W/ RAL 6005 Moss Green].
[PS 43W/ RAL 9007 Grey Aluminium].
 Operation:
[Electrical]. - 3-phase 230 V AC.
[Hoist and handchain type T]. - Chain hoist "T" (Gear ratio 1:4, Door weight maximum 250 kg).
[Hoist and handchain type U]. - Chain hoist "U" (Gear ratio 1:3, Door weight >250 kg).
[Pull down rope and lifting handle].
 Control unit:
[Not required].
[Required]. - Electrical operation, see ‘Options’ below and insert requirements.
 Windows:
[1 row DAOP, double acrylic in a polycarbonate frame with rounded ends, internal dimensions 590 x 270 mm].
[1 row DARP, double acrylic in a polycarbonate rectangular frame, internal dimensions 600 x 290 mm].
[1 full width row of satin anodized, aluminium framed, glazed with double acrylic].
[1 full width row of satin anodized, aluminium framed, glazed with 4 mm hardened glass].
 Other requirements:
[External security cylinder lock set into the door panel].
[Internal security cylinder lock set into the door panel].
[Integral outward opening personnel door, complete with self closer, satin anodised aluminium frame with mitred corners, lever handles and cylinder lock (Euro cylinder)].
[Micro switch to provide an interlock]. - electrically operated doors only.
[Ventilators].


top ^

Guidance

for Crawford OH1042P Overhead Sectional Door

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford OH1042P Overhead Sectional Door: As standard - Options - Approvals

As standard

Size:

Maximum: 8000 x 6000 mm.

Fittings:

  • Shot blasted counterbalance springs, mounted on a galvanized, hexagonal shaft, installed at low level.
  • Spring and cable break anti-drop devices.
  • Anti lift device.
  • Flush hinges and roller brackets.
  • Inset lifting handle.
  • EPDM perimeter and horizontal joint seals.
  • Finger pinch protection to horizontal joints.

Door panels:

545 mm deep, 42 mm thick process laminated steel panels with internal steel bands and insulated with CFC free polyurethane. Panel design incorporates a unique diamond design to external surface of the outer face.

Ironmongery:

Internal sliding shootbolt with interlocked micro switch to prevent motor and door damage

Performance:

  • EN 12424 Wind resistance (Class 3).
  • EN 12425 Water penetration Class 3 – 70 Pa resistance.
  • EN 12426 Air permeability ( Class 3).
  • Fire resistance performance to DIN 4102.

Options

Arrangement:

Size (width x height): Insert details.

Operation:

- Electrical:

  • Operating voltage: 230 V AC, 50/60 Hz.
  • Fuse: 10 A.
  • Brake: Non-reversible worm gear.
  • Speed monitor: Electronic monitoring.
  • Limit switch: Electronic via torque.
  • Gears: Worm gear 1750 RPM yields approximately 24 rotations door shaft.
  • Direct drive system.
  • No special wall reinforcement necessary.
  • Temperature range: -20°C to 60°C.
  • Soft stop, soft start.
  • Connection using "CEE plug" or lockable mains isolator.
  • Maximum door weight 400 kg.

- Control unit:

  • Output 0.37 kW, input 230 V. Including control unit with standard actuator Up-Stop- Down. The door closes using dead-man controls.
  • Operating speed 0.25 m/s, safety rating IP 55. If there is a power failure, the disengage device enables manual operation at any time.
  • Radio remote control.
  • Open (if open button is used during closing process - door immediately stops and opens completely).
  • Automatic close (safety photo cell compulsory requirement).
  • Door closes automatically after set period (4–60 seconds).
  • Pull switch for opening function.
  • External push-button, key switch.
  • Door/ bridge interlock.

Windows:

  • 1 row DAOP, double acrylic in a polycarbonate frame with rounded ends, internal dimensions 610 x 292 mm.
  • 1 row DARP, double acrylic in a polycarbonate rectangular frame, internal dimensions 604 x 292 mm.
  • 1 full width row of satin anodized, aluminium framed, glazed with double acrylic.
  • 1 full width row of satin anodized, aluminium framed, glazed with 4 mm hardened glass.

Other requirements:

  • External/ internal security cylinder lock set into the door panel.
  • Integral outward opening personnel door, complete with low profile threshold, self closer, satin anodised aluminium frame with mitred corners, lever handles and cylinder lock (Euro cylinder).
  • Micro switch to provide an interlock (electrically operated doors only).
  • Ventilators.

Approvals

  • Secured By Design .

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 11 December 2017