A-Z Manufacturers (ASSA ABLOY Entrance Systems Ltd - Industrial) |  CAWS Index

Crawford DL6010SM Swingdock Minidock Leveller

The Crawford DL6010SM Minidock is a full docking system developed for a limited working range, the ideal solution for a standardized fleet of vehicles. It is available as ramp model as well as pit model. The advantage of the ramp model is the quick installation which also can be provided as an add-on to existing ramps. The operation of the Crawford DL6010SM Minidock is mechanical and is supported by a gas spring. Only one person is needed to lift the platform, swing out, and put the lip on the vehicle bed in one movement. The Crawford DL6010SM Minidock solution adopts a free-floating position - the platform follows the vehicle's movements up and down during loading and unloading. The dock leveller meets all requirements of European Directive EN 1398.The swing lip safely bridges the gap between the ramp and the lorry bed. By manually pulling the rod, the dock leveller is raised and the lip swings out. Then the leveller can be lowered gently onto the lorry bed. After loading or unloading, pulling the rod raises the leveller again, the lip swings down and the platform returns to its parking position, i.e. to ramp level.Length (nominal):700 mm.Vertical working range: Above dock: 0–100 mm.Below dock: 0–100 mm.Lip material: Steel.Load capacity: 4 tonnes (40 kN); 6 tonnes (60 kN) for 2000 and 2200 mm widths.Paint classes:If the dock leveller is to be used in a rural area, the standard finish is:Paint class 1; 80 µm factory painted for corrosive category C2 M.If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.Paint class 3; 160 µm factory painted for corrosive category C3 M.To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.Buffers:Consult manufacturer's literature for further information.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=02175&f=COL1502175.pdf&pg=

The Crawford DL6010SM Minidock is a full docking system developed for a limited working range, the ideal solution for a standardized fleet of vehicles. It is available as ramp model as well as pit model. The advantage of the ramp model is the quick installation which also can be provided as an add-on to existing ramps. The operation of the Crawford DL6010SM Minidock is mechanical and is supported by a gas spring. Only one person is needed to lift the platform, swing out, and put the lip on the vehicle bed in one movement. The Crawford DL6010SM Minidock solution adopts a free-floating position - the platform follows the vehicle's movements up and down during loading and unloading. The dock leveller meets all requirements of European Directive EN 1398.

The swing lip safely bridges the gap between the ramp and the lorry bed. By manually pulling the rod, the dock leveller is raised and the lip swings out. Then the leveller can be lowered gently onto the lorry bed. After loading or unloading, pulling the rod raises the leveller again, the lip swings down and the platform returns to its parking position, i.e. to ramp level.

More about Crawford DL6010SM Swingdock Minidock Leveller:
As standard - Options

Crawford DL6010SM Swingdock Minidock Leveller
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DL6010SM Swingdock Minidock Leveller.
 Width:
[1250 mm].
[2000 mm].
[2200 mm].
 Surface treatment:
[Hot dip galvanized].
[Painted, RAL 3002].
[Painted, RAL 5010 ]. - As standard.
[Painted, RAL 6005].
[Painted, RAL 9005].
 Installation:
[Ramp]. - Steel support construction for buffers included.
[Pit].
 Buffers:
[Not required].
[RB].
[RB with steel protection plate].
[RB/2].


top ^

Guidance

for Crawford DL6010SM Swingdock Minidock Leveller

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6010SM Swingdock Minidock Leveller: As standard - Options

As standard

Length (nominal):

700 mm.

Vertical working range:

  • Above dock: 0–100 mm.
  • Below dock: 0–100 mm.

Lip material:

Steel.

Options

Load capacity:

  • 4 tonnes (40 kN); 6 tonnes (60 kN) for 2000 and 2200 mm widths.

Paint classes:

If the dock leveller is to be used in a rural area, the standard finish is:

  • Paint class 1; 80 µm factory painted for corrosive category C2 M.

If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.

  • Paint class 3; 160 µm factory painted for corrosive category C3 M.

To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.

Buffers:

Consult manufacturer's literature for further information.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 11 December 2017