A-Z Manufacturers (Teckentrup UK Ltd ) |  CAWS Index (L20 610)
Teckentrup UK Ltd

Teckentrup UK Ltd

www.teckentrup.co.uk

riba@teckentrup.co.uk

T: +44 (0)1925 924050

F: +44 (0)870 1314843

Unit 8-9 Gemini Trade Park, Europa Boulevard, Westbrook, Warrington. WA5 7YF

RIBA Product Selector
RIBA CPD

This NBS Plus page covers roller shutter door

relating to clause 610 ROLLER SHUTTERS/ CURTAINS

in L20 Doors/ shutters/ hatches.

For more NBS Plus information from this company, see the Teckentrup UK Ltd overview page which includes a clause list and a product list.

 

View larger image of Roller Shutter Thermo Teck from Teckentrup UK Ltd Roller Shutter Thermo Teck

Roller shutter, double-skinned, insulated, made of steel profiles, galvanized consoles. Resistance to wind load in accordance with EN 12424 class 2. With header seal and prime coated winding shaft.Fixing applications:Masonry.Concrete.Steel.Autoclaved aerated concrete.Wooden framework.Heat insulation (EN ISO 12567-1):3.5 W/m²k (typical).Sound insulation:RW 20 dB.Air permeability (EN 12426):Class: 0.Resistance to wind load (EN 12424):Class: 2.Resistance to water penetration (EN 12489):Class: 0.General:Door curtain: Hinge-like interconnected galvanized steel.Glazing: ThermoTeck synthetic glazing, crystal clear, approximately 150 x 55 mm.Bottom seal: Double-skinned box profile made of aluminium with permanently elastic and frost-proof EPDM profile hose seal for a sealed bottom door edge.End caps: Robust, wear and corrosion-free plastic parts for fixing the profiles.Wind hooks: For high wind loads and large widths; the doors are equipped with wind hooks and a reinforced bottom seal.Guide rails: Robust, steel profiles with wear-proof, easy-to-change plastic guides.Consoles: Galvanized steel.Locking: All locks connected to door control unit via safety switches. Bottom profile lockable from inside via two locking rods with profile cylinder. Bottom profile lockable from inside and outside via two locking rods with profile cylinder. Sliding bolt on the inside.

Roller shutter, double-skinned, insulated, made of steel profiles, galvanized consoles. Resistance to wind load in accordance with EN 12424 class 2. With header seal and prime coated winding shaft.

Fixing applications:

  • Masonry.
  • Concrete.
  • Steel.
  • Autoclaved aerated concrete.
  • Wooden framework.

More about Roller Shutter Thermo Teck:
As standard - Further information.

PendingROLLER SHUTTER DOOR:
 Manufacturer:
Teckentrup UK Ltd .
  -Web:www.teckentrup.co.uk.
  -Tel:+44 (0)1925 924050 .
  -Product reference:
Roller Shutter Thermo Teck.
 Size (h x w):
[ ______ ] - 1000–12 000 mm height, 1000–11 500 mm width, available in 15 000 and 18 000 mm widths upon request.
 Colour:
[Polyester powder coated, RAL]. - Optional, available in any RAL colour.
 Finish:
[Coil-coated steel].
[Galvanized steel].
 Glazing:
[Required].
[Not required].
 Drive:
[Chain drive]. - With separate anti-drop device.
[Direct mount drive]. - With integrated anti-drop device.
 Accessories:
[ ______ ] - Various items of special equipment and control devices are available, consult manufacturer and insert requirements.


top ^

Guidance

for Roller Shutter Thermo Teck

from Teckentrup UK Ltd

More about Roller Shutter Thermo Teck: As standard - Further information.

As standard

Heat insulation (EN ISO 12567-1):

3.5 W/m²k (typical).

Sound insulation:

RW 20 dB.

Air permeability (EN 12426):

Class: 0.

Resistance to wind load (EN 12424):

Class: 2.

Resistance to water penetration (EN 12489):

Class: 0.

General:

  • Door curtain: Hinge-like interconnected galvanized steel.
  • Glazing: ThermoTeck synthetic glazing, crystal clear, approximately 150 x 55 mm.
  • Bottom seal: Double-skinned box profile made of aluminium with permanently elastic and frost-proof EPDM profile hose seal for a sealed bottom door edge.
  • End caps: Robust, wear and corrosion-free plastic parts for fixing the profiles.
  • Wind hooks: For high wind loads and large widths; the doors are equipped with wind hooks and a reinforced bottom seal.
  • Guide rails: Robust, steel profiles with wear-proof, easy-to-change plastic guides.
  • Consoles: Galvanized steel.
  • Locking: All locks connected to door control unit via safety switches. Bottom profile lockable from inside via two locking rods with profile cylinder. Bottom profile lockable from inside and outside via two locking rods with profile cylinder. Sliding bolt on the inside.

Further Information

Literature:

RIBA CPD

CPD information is available for Teckentrup UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Teckentrup UK Ltd from ribaproductselector.com.

Contacts:

www.teckentrup.co.uk

riba@teckentrup.co.uk

T: +44 (0)1925 924050

F: +44 (0)870 1314843

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 13 December 2017