A-Z Manufacturers (SURFASOLOGY) |  CAWS Index (J40 297)
SURFASOLOGY

SURFASOLOGY

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Unit 143, Grange Drive, Baldoyle Industrial Estate, Dublin 13

This NBS Plus page covers two ply waterproofing membrane, composite waterproofing membrane, needle punched non-woven fleece and needle punched non-woven fleece with uv protection layer

relating to clause 297 WATERPROOFING/ DAMP PROOFING MEMBRANE

in J40 Flexible sheet waterproofing/ damp proofing.

For more NBS Plus information from this company, see the SURFASOLOGY overview page which includes a clause list and a product list.


Products from SURFASOLOGY

Bookmark
Dualproof L800 - Two-ply waterproofing membrane.
Bookmark
DualProof S - Composite waterproofing membrane.
Bookmark
DualProof T - Composite waterproofing membrane.
Bookmark
EasySeal - Needle-punched non-woven fleece.
Bookmark
SilverSeal - Needle-punched non-woven fleece with a UV protection layer.
 

View larger image of Dualproof L800 from SURFASOLOGYDualproof L800

Two-ply membrane which consists of needle-punch non-woven and TPO/ FPO high performance waterproofing layers. The product includes an additional self-adhesive strip along one long side.Suitable for waterproofing fresh concrete areas.CE marked in accordance with DIN EN 13967 (Certificate: 0761-CPR-0514). General building authority test certificate (P-1201/116/16-MPA BS).Five-year warranty.Colour:Grey/ black.Technical characteristics:Resistance to temperature: -30 to +60°C.Total width: 1000 mm ±5 mm.Total thickness: 1.6 mm ±0.1 mm.Length per roll: 20 m (alternative sizes available upon request).Tear resistance – lengthwise DIN EN 12311-2 Method A: 400 N/50 mm.Tear resistance – across DIN EN 12311-2 Method A: 340 N/50 mm.Elongation at break – lengthwise DIN EN 12311-2 Method A: 90–120%.Tear resistance (nail shank) DIN EN 12310-1: 370–380 N.Water vapour permeability DIN EN 1931 Method B: 60 m.Water tightness (DIN EN 1928-A- 60 kPa/ 24 Std, DIN EN 1928-B- 400 kPa/ 72 Std): Watertight.Water migration test (non-woven area).External: 5 bar (maximum).Reaction to fire (DIN ISO 11925-2 and EN 13501-1): Class E.Chemical Resistance: Resistance to a wide range of chemical liquids.Material:Membrane: Flexible Polyolefin (FPO).Coverage: Polypropylene needle-punch non-woven.Self-adhesive strip: Butyl rubber, high elastic, resistant to ageing and release liner.

Two-ply membrane which consists of needle-punch non-woven and TPO/ FPO high performance waterproofing layers. The product includes an additional self-adhesive strip along one long side.

Suitable for waterproofing fresh concrete areas.

CE marked in accordance with DIN EN 13967 (Certificate: 0761-CPR-0514). General building authority test certificate (P-1201/116/16-MPA BS).

Five-year warranty.

More about Dualproof L800:
As standard - Further information.

PendingTWO PLY WATERPROOFING MEMBRANE:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
Dualproof L800.


top ^

Guidance

for Dualproof L800

from SURFASOLOGY

More about Dualproof L800: As standard - Further information.

As standard

Colour:

Grey/ black.

Technical characteristics:

  • Resistance to temperature: -30 to +60°C.
  • Total width: 1000 mm ±5 mm.
  • Total thickness: 1.6 mm ±0.1 mm.
  • Length per roll: 20 m (alternative sizes available upon request).
  • Tear resistance – lengthwise DIN EN 12311-2 Method A: 400 N/50 mm.
  • Tear resistance – across DIN EN 12311-2 Method A: 340 N/50 mm.
  • Elongation at break – lengthwise DIN EN 12311-2 Method A: 90–120%.
  • Tear resistance (nail shank) DIN EN 12310-1: 370–380 N.
  • Water vapour permeability DIN EN 1931 Method B: 60 m.
  • Water tightness (DIN EN 1928-A- 60 kPa/ 24 Std, DIN EN 1928-B- 400 kPa/ 72 Std): Watertight.
  • Water migration test (non-woven area).
  • External: 5 bar (maximum).
  • Reaction to fire (DIN ISO 11925-2 and EN 13501-1): Class E.
  • Chemical Resistance: Resistance to a wide range of chemical liquids.

Material:

  • Membrane: Flexible Polyolefin (FPO).
  • Coverage: Polypropylene needle-punch non-woven.
  • Self-adhesive strip: Butyl rubber, high elastic, resistant to ageing and release liner.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of DualProof S from SURFASOLOGYDualProof S

DualProof is a 1.7 mm composite waterproofing membrane which forms a permanent bond with concrete, preventing the tracking of water between the waterproofing membrane and the concrete substructure.The membrane consists of a special non-woven PP fleece, which is co-extruded with a flexible PVC sheet. The product can be post-applied, designed for the waterproofing and protection of below-ground reinforced concrete structures.When fresh concrete is placed, it achieves a complete mechanical bond with the unique PP fleece and prevents any water movement between the concrete and the membrane.Features and benefits:Permanent bond prevents tracking of water between the membrane and the concrete.Provides all grades of protection according to BS 8102: 2009.Fast and easy to install using DualProof Cementitious Adhesive.May be installed in all weather conditions.No requirements for complicated welding equipment.Lightweight and versatile. Easy on-site handling.Protects concrete against salt and sulfate attack.Unaffected by ground settlement.Resistant to ground gases (including radon).Independently tested. Designed and manufactured in Germany to DIN 18195.CE marked (DIN EN 13969).DIN V 20000-202-approved.General German Test Report PG-ÜBB / abP and CPR certificate to EN 13967:2004 + A1:2006 available upon request.Size:30 m² (1.2 x 25 m) rolls.

DualProof is a 1.7 mm composite waterproofing membrane which forms a permanent bond with concrete, preventing the tracking of water between the waterproofing membrane and the concrete substructure.

The membrane consists of a special non-woven PP fleece, which is co-extruded with a flexible PVC sheet. The product can be post-applied, designed for the waterproofing and protection of below-ground reinforced concrete structures.

When fresh concrete is placed, it achieves a complete mechanical bond with the unique PP fleece and prevents any water movement between the concrete and the membrane.

Features and benefits:

  • Permanent bond prevents tracking of water between the membrane and the concrete.
  • Provides all grades of protection according to BS 8102: 2009.
  • Fast and easy to install using DualProof Cementitious Adhesive.
  • May be installed in all weather conditions.
  • No requirements for complicated welding equipment.
  • Lightweight and versatile. Easy on-site handling.
  • Protects concrete against salt and sulfate attack.
  • Unaffected by ground settlement.
  • Resistant to ground gases (including radon).
  • Independently tested. Designed and manufactured in Germany to DIN 18195.
  • CE marked (DIN EN 13969).
  • DIN V 20000-202-approved.
  • General German Test Report PG-ÜBB / abP and CPR certificate to EN 13967:2004 + A1:2006 available upon request.

More about DualProof S:
As standard - Further information.

PendingCOMPOSITE WATERPROOFING MEMBRANE:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
DualProof S.


top ^

Guidance

for DualProof S

from SURFASOLOGY

More about DualProof S: As standard - Further information.

As standard

Size:

30 m² (1.2 x 25 m) rolls.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of DualProof T from SURFASOLOGYDualProof T

DualProof is a 1.7 mm composite waterproofing membrane which forms a permanent bond with concrete, preventing the tracking of water between the waterproofing membrane and the concrete substructure.The membrane consists of a special non-woven PP fleece, which is co-extruded with a flexible PVC sheet. The product can be pre-applied, designed for the waterproofing and protection of below-ground reinforced concrete structures.When fresh concrete is placed, it achieves a complete mechanical bond with the unique PP fleece and prevents any water movement between the concrete and the membrane.Features and benefits:Permanent bond prevents tracking of water between the membrane and the concrete.Provides all grades of protection according to BS 8102: 2009.Fast and easy to install using DualProof Cementitious Adhesive.May be installed in all weather conditions.No requirements for complicated welding equipment.Lightweight and versatile. Easy on-site handling.Protects concrete against salt and sulfate attack.Unaffected by ground settlement.May be used in saltwater conditions.Resistant to ground gases (including Radon).Independently tested. Designed and manufactured in Germany to DIN 18195.CE marked (DIN EN 13969).DIN V 20000-202-approved.General German Test Report PG-ÜBB / abP and CPR certificate to EN 13967:2004 + A1:2006 available upon request.Size:30 m² (1.2 x 25 m) rolls.

DualProof is a 1.7 mm composite waterproofing membrane which forms a permanent bond with concrete, preventing the tracking of water between the waterproofing membrane and the concrete substructure.

The membrane consists of a special non-woven PP fleece, which is co-extruded with a flexible PVC sheet. The product can be pre-applied, designed for the waterproofing and protection of below-ground reinforced concrete structures.

When fresh concrete is placed, it achieves a complete mechanical bond with the unique PP fleece and prevents any water movement between the concrete and the membrane.

Features and benefits:

  • Permanent bond prevents tracking of water between the membrane and the concrete.
  • Provides all grades of protection according to BS 8102: 2009.
  • Fast and easy to install using DualProof Cementitious Adhesive.
  • May be installed in all weather conditions.
  • No requirements for complicated welding equipment.
  • Lightweight and versatile. Easy on-site handling.
  • Protects concrete against salt and sulfate attack.
  • Unaffected by ground settlement.
  • May be used in saltwater conditions.
  • Resistant to ground gases (including Radon).
  • Independently tested. Designed and manufactured in Germany to DIN 18195.
  • CE marked (DIN EN 13969).
  • DIN V 20000-202-approved.
  • General German Test Report PG-ÜBB / abP and CPR certificate to EN 13967:2004 + A1:2006 available upon request.

More about DualProof T:
As standard - Further information.

PendingCOMPOSITE WATERPROOFING MEMBRANE:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
DualProof T.


top ^

Guidance

for DualProof T

from SURFASOLOGY

More about DualProof T: As standard - Further information.

As standard

Size:

30 m² (1.2 x 25 m) rolls.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of EasySeal from SURFASOLOGYEasySeal

A needle-punched non-woven fleece, impregnated with water-absorbing and water-swelling polymer, which is self-healing.Penetrating water causes the polymers to swell and thus renders the membrane impermeable. The building structure is permanently protected against penetrating water: even small cracks and voids in the concrete are sealed.EasySeal is a lightweight waterproofing system for use in any water-sealing applications. Overlaps can be detailed with CEM 805 Polymer Adhesive.The product is available with a UV protection layer; see SilverSeal.Features and benefits:Tough and resistant, plus quick and easy to install.High compound shear strength.Can be installed in every season, independently of temperature and weather condition.No need for complicated welding equipment or specially trained personnel.Quality controlled product.Self-healing properties due to the pressure of the swelling polymers.Seals small cracks in the concrete by the pressure of the swelling SAP.Can be used in saltwater conditions.Independently tested at the University of Braunschweig, Germany.Enormous water-absorbing capacity, and therefore enormous swelling and sealing capacity.Technical characteristics:Type: Needle-punched non-woven, impregnated.Raw material: Polypropylene fibres.Swelling material: Water-absorbing, swelling polymer.Mass per unit area, dry/ wet after swelling/ re-dried to EN 965: 450/ 8200/ 400 g/m².Thickness at surcharge 2 kN/m², dry/ wet after swelling/ re-dried to EN 964: 1.9/ 7.5/ 4.5 mm.Surcharge 20 kN/m² / 200 kN/m², dry: 2.2/ 1.3 mm.Maximum tensile force, dry/ wet after swelling/ re-dried to EN 1031: 11.6/ 3.4/ 10.3 kN/m.Associated elongation, dry/ wet after swelling/ re-dried to EN 10319: 69/ 117/ 92%.Static puncture test, dry/ wet after swelling/ re-dried to EN 12236: 1.7/ 1.0/ 1.6 kN.Associated movement of plunger, dry/ wet after swelling/ re-dried to EN 12236: 6.1/ 10.8/ 6.1 cm.Class of robustness: GRK 3.Water permeability to DIN 18130: TX-KP-STUO.Initial swelling: <5 x 10-9.Dry-Wet testing: <3 x 10-9.Frost-thaw-cycle (four cycles): < 3,9 x 10-9.

A needle-punched non-woven fleece, impregnated with water-absorbing and water-swelling polymer, which is self-healing.

Penetrating water causes the polymers to swell and thus renders the membrane impermeable. The building structure is permanently protected against penetrating water: even small cracks and voids in the concrete are sealed.

EasySeal is a lightweight waterproofing system for use in any water-sealing applications. Overlaps can be detailed with CEM 805 Polymer Adhesive.

The product is available with a UV protection layer; see SilverSeal.

Features and benefits:

  • Tough and resistant, plus quick and easy to install.
  • High compound shear strength.
  • Can be installed in every season, independently of temperature and weather condition.
  • No need for complicated welding equipment or specially trained personnel.
  • Quality controlled product.
  • Self-healing properties due to the pressure of the swelling polymers.
  • Seals small cracks in the concrete by the pressure of the swelling SAP.
  • Can be used in saltwater conditions.
  • Independently tested at the University of Braunschweig, Germany.
  • Enormous water-absorbing capacity, and therefore enormous swelling and sealing capacity.

More about EasySeal:
As standard - Further information.

PendingNEEDLE PUNCHED NON-WOVEN FLEECE:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
EasySeal.


top ^

Guidance

for EasySeal

from SURFASOLOGY

More about EasySeal: As standard - Further information.

As standard

Technical characteristics:

  • Type: Needle-punched non-woven, impregnated.
  • Raw material: Polypropylene fibres.
  • Swelling material: Water-absorbing, swelling polymer.
  • Mass per unit area, dry/ wet after swelling/ re-dried to EN 965: 450/ 8200/ 400 g/m².
  • Thickness at surcharge 2 kN/m², dry/ wet after swelling/ re-dried to EN 964: 1.9/ 7.5/ 4.5 mm.
  • Surcharge 20 kN/m² / 200 kN/m², dry: 2.2/ 1.3 mm.
  • Maximum tensile force, dry/ wet after swelling/ re-dried to EN 1031: 11.6/ 3.4/ 10.3 kN/m.
  • Associated elongation, dry/ wet after swelling/ re-dried to EN 10319: 69/ 117/ 92%.
  • Static puncture test, dry/ wet after swelling/ re-dried to EN 12236: 1.7/ 1.0/ 1.6 kN.
  • Associated movement of plunger, dry/ wet after swelling/ re-dried to EN 12236: 6.1/ 10.8/ 6.1 cm.
  • Class of robustness: GRK 3.
  • Water permeability to DIN 18130: TX-KP-STUO.
  • Initial swelling: <5 x 10-9.
  • Dry-Wet testing: <3 x 10-9.
  • Frost-thaw-cycle (four cycles): < 3,9 x 10-9.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of SilverSeal from SURFASOLOGYSilverSeal

A needle-punched non-woven fleece with a UV protection layer, impregnated with water-absorbing and water-swelling polymer which is self-healing.Penetrating water causes the polymers to swell and thus renders the membrane impermeable. The building structure is permanently protected against penetrating water: even small cracks and voids in the concrete are sealed.SilverSeal is a lightweight waterproofing system for use in any water-sealing applications. Overlaps can be detailed with CEM 805 Polymer Adhesive.Features and benefits:Tough and resistant, plus quick and easy to install.High compound shear strength.Can be installed in every season, independently of temperature and weather condition.No need for complicated welding equipment or specially trained personnel.Quality controlled product.Self-healing properties due to the pressure of the swelling polymers.Seals small cracks in the concrete by the pressure of the swelling SAP.Can be used in salt water conditions.Independently tested at the University of Braunschweig, Germany.Enormous water-absorbing capacity, and therefore enormous swelling and sealing capacity.Technical characteristics:Type: Needle-punched non-woven, impregnated.Raw material: Polypropylene fibres.Swelling material: Water-absorbing, swelling polymer.Mass per unit area, dry/ wet after swelling/ re-dried to EN 965: 450/ 8200/ 400 g/m².Thickness at surcharge 2 kN/m², dry/ wet after swelling/ re-dried to EN 964: 1.9/ 7.5/ 4.5 mm.Surcharge 20 kN/m² / 200 kN/m², dry: 2.2/ 1.3 mm.Maximum tensile force, dry/ wet after swelling/ re-dried to EN 1031: 11.6/ 3.4/ 10.3 kN/m.Associated elongation, dry/ wet after swelling/ re-dried to EN 10319: 69/ 117/ 92%.Static puncture test, dry/ wet after swelling/ re-dried to EN 12236: 1.7/ 1.0/ 1.6 kN.Associated movement of plunger, dry/ wet after swelling/ re-dried to EN 12236: 6.1/ 10.8/ 6.1 cm.Class of robustness: GRK 3.Testing of swelling pressure: >190 kN/m².Water permeability to DIN 18130: TX-KP-STUO.Initial swelling: <5 x 10-9.Dry-Wet testing: <3 x 10-9.Frost-thaw-cycle (four cycles): <3,9 x 10-9.

A needle-punched non-woven fleece with a UV protection layer, impregnated with water-absorbing and water-swelling polymer which is self-healing.

Penetrating water causes the polymers to swell and thus renders the membrane impermeable. The building structure is permanently protected against penetrating water: even small cracks and voids in the concrete are sealed.

SilverSeal is a lightweight waterproofing system for use in any water-sealing applications. Overlaps can be detailed with CEM 805 Polymer Adhesive.

Features and benefits:

  • Tough and resistant, plus quick and easy to install.
  • High compound shear strength.
  • Can be installed in every season, independently of temperature and weather condition.
  • No need for complicated welding equipment or specially trained personnel.
  • Quality controlled product.
  • Self-healing properties due to the pressure of the swelling polymers.
  • Seals small cracks in the concrete by the pressure of the swelling SAP.
  • Can be used in salt water conditions.
  • Independently tested at the University of Braunschweig, Germany.
  • Enormous water-absorbing capacity, and therefore enormous swelling and sealing capacity.

More about SilverSeal:
As standard - Further information.

PendingNEEDLE PUNCHED NON-WOVEN FLEECE WITH UV PROTECTION LAYER:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
SilverSeal.


top ^

Guidance

for SilverSeal

from SURFASOLOGY

More about SilverSeal: As standard - Further information.

As standard

Technical characteristics:

  • Type: Needle-punched non-woven, impregnated.
  • Raw material: Polypropylene fibres.
  • Swelling material: Water-absorbing, swelling polymer.
  • Mass per unit area, dry/ wet after swelling/ re-dried to EN 965: 450/ 8200/ 400 g/m².
  • Thickness at surcharge 2 kN/m², dry/ wet after swelling/ re-dried to EN 964: 1.9/ 7.5/ 4.5 mm.
  • Surcharge 20 kN/m² / 200 kN/m², dry: 2.2/ 1.3 mm.
  • Maximum tensile force, dry/ wet after swelling/ re-dried to EN 1031: 11.6/ 3.4/ 10.3 kN/m.
  • Associated elongation, dry/ wet after swelling/ re-dried to EN 10319: 69/ 117/ 92%.
  • Static puncture test, dry/ wet after swelling/ re-dried to EN 12236: 1.7/ 1.0/ 1.6 kN.
  • Associated movement of plunger, dry/ wet after swelling/ re-dried to EN 12236: 6.1/ 10.8/ 6.1 cm.
  • Class of robustness: GRK 3.
  • Testing of swelling pressure: >190 kN/m².
  • Water permeability to DIN 18130: TX-KP-STUO.
  • Initial swelling: <5 x 10-9.
  • Dry-Wet testing: <3 x 10-9.
  • Frost-thaw-cycle (four cycles): <3,9 x 10-9.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 14 December 2017