A-Z Manufacturers (SURFASOLOGY) |  CAWS Index (J40 290)
SURFASOLOGY

SURFASOLOGY

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Unit 143, Grange Drive, Baldoyle Industrial Estate, Dublin 13

This NBS Plus page covers high density polyethylene (hdpe) membrane

relating to clause 290 HIGH DENSITY POLYETHYLENE/ POLYPROPYLENE STUDDED CAVITY DRAIN MEMBRANE

in J40 Flexible sheet waterproofing/ damp proofing.

For more NBS Plus information from this company, see the SURFASOLOGY overview page which includes a clause list and a product list.


Products from SURFASOLOGY

Bookmark
SURFASDRAIN 8 - High density polyethylene (HDPE) membrane, 8 mm.
Bookmark
SURFASDRAIN 20 - High density polyethylene (HDPE) membrane, 20 mm.
 

View larger image of SURFASDRAIN 8 from SURFASOLOGYSURFASDRAIN 8

SURFASDRAIN 8 is a high density polyethylene (HDPE) 8 mm dimpled membrane, which may be used as part of a Type C drainage protection system according to BS 8102:2009.The membrane is placed on the prepared surface and directs the water to the drainage channel.Features and benefits:Capable of controlling 4.61 L/s/m² water flow rate.Easy to install.Suitable for above- and below-ground applications.Manufactured under an SGS quality management system according to ISO 9001.Colour:Black.Technical characteristics:Thickness: 0.5 mm ±5%.Dimple height: 8 mm ±1%.Size (l x w): 30 x 2 m ±4%. (Roll: 60 m²).Roll weight: 24 kg ±5%.Compressive strength: 120 ±20 kN/m².Tensile strength (LxT) to EN ISO 12311-2: >200 N/ 5 cm.Elongation (LxT) to EN ISO 12311-2: >20 >25%.Waterproofing (60 kPa, 24 h) to EN 1928: Pass.Crushing strength to ISO 25619-2: >90 kPa.Resistance to deformation under a load (50 kPa, 1000 h) to EN 13967: <3 mm.Thermal stability: -40 to +80°C; protect from UV.- Hydraulic properties:Vertical drainage i = 1: 3.4 L/m/s at 20 kN/m², 2.8 L/m/s at 50 kN/m², 2 L/m/s at 100 kN/m².Horizontal drainage i = 0.1: 1.1 L/m/s at 20 kN/m², 0.85 L/m/s at 50 kN/m², 0.6 L/m/s at 100 kN/m².

SURFASDRAIN 8 is a high density polyethylene (HDPE) 8 mm dimpled membrane, which may be used as part of a Type C drainage protection system according to BS 8102:2009.

The membrane is placed on the prepared surface and directs the water to the drainage channel.

Features and benefits:

  • Capable of controlling 4.61 L/s/m² water flow rate.
  • Easy to install.
  • Suitable for above- and below-ground applications.
  • Manufactured under an SGS quality management system according to ISO 9001.

More about SURFASDRAIN 8:
As standard - Further information.

PendingHIGH DENSITY POLYETHYLENE (HDPE) MEMBRANE:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
SURFASDRAIN 8.


top ^

Guidance

for SURFASDRAIN 8

from SURFASOLOGY

More about SURFASDRAIN 8: As standard - Further information.

As standard

Colour:

Black.

Technical characteristics:

  • Thickness: 0.5 mm ±5%.
  • Dimple height: 8 mm ±1%.
  • Size (l x w): 30 x 2 m ±4%. (Roll: 60 m²).
  • Roll weight: 24 kg ±5%.
  • Compressive strength: 120 ±20 kN/m².
  • Tensile strength (LxT) to EN ISO 12311-2: >200 N/ 5 cm.
  • Elongation (LxT) to EN ISO 12311-2: >20 >25%.
  • Waterproofing (60 kPa, 24 h) to EN 1928: Pass.
  • Crushing strength to ISO 25619-2: >90 kPa.
  • Resistance to deformation under a load (50 kPa, 1000 h) to EN 13967: <3 mm.
  • Thermal stability: -40 to +80°C; protect from UV.

- Hydraulic properties:

  • Vertical drainage i = 1: 3.4 L/m/s at 20 kN/m², 2.8 L/m/s at 50 kN/m², 2 L/m/s at 100 kN/m².
  • Horizontal drainage i = 0.1: 1.1 L/m/s at 20 kN/m², 0.85 L/m/s at 50 kN/m², 0.6 L/m/s at 100 kN/m².

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of SURFASDRAIN 20 from SURFASOLOGYSURFASDRAIN 20

SURFASDRAIN 20 is a high density polyethylene (HDPE) 20 mm dimpled membrane, which may be used as part of a Type C drainage protection system according to BS 8102:2009.The membrane is placed on the prepared surface and directs the water to the drainage channel.Features and benefits:Capable of controlling 10 L/s/m² water flow rate.Easy to install.Suitable for above- and below-ground applications.Manufactured under the SGS quality management system according to ISO 9001.Colour:Black.Technical characteristics:Thickness: 0.5 mm ±5%.Dimple height: 7 mm ±1%.Size (l x w): 30 x 2 m ±4%. (Roll: 60 m²).Roll weight: 40 kg ±5%.Compressive strength: 150 kN/m².Tensile strength (LxT) to EN ISO 10319: 9 kN/m ±1 N/ 5 cm.Elongation (LxT) to EN ISO 10319: >20 ± 5%.Waterproofing (60 kPa, 24 h) to EN 1928: Pass.Crushing strength to ISO 25619-2: >90 kPa.Resistance to deformation under a load (50 kPa, 1000 h) to EN 13967: <3 mm.Thermal stability: -40 to +80°C; protect from UV.

SURFASDRAIN 20 is a high density polyethylene (HDPE) 20 mm dimpled membrane, which may be used as part of a Type C drainage protection system according to BS 8102:2009.

The membrane is placed on the prepared surface and directs the water to the drainage channel.

Features and benefits:

  • Capable of controlling 10 L/s/m² water flow rate.
  • Easy to install.
  • Suitable for above- and below-ground applications.
  • Manufactured under the SGS quality management system according to ISO 9001.

More about SURFASDRAIN 20:
As standard - Further information.

PendingHIGH DENSITY POLYETHYLENE (HDPE) MEMBRANE:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
SURFASDRAIN 20.


top ^

Guidance

for SURFASDRAIN 20

from SURFASOLOGY

More about SURFASDRAIN 20: As standard - Further information.

As standard

Colour:

Black.

Technical characteristics:

  • Thickness: 0.5 mm ±5%.
  • Dimple height: 7 mm ±1%.
  • Size (l x w): 30 x 2 m ±4%. (Roll: 60 m²).
  • Roll weight: 40 kg ±5%.
  • Compressive strength: 150 kN/m².
  • Tensile strength (LxT) to EN ISO 10319: 9 kN/m ±1 N/ 5 cm.
  • Elongation (LxT) to EN ISO 10319: >20 ± 5%.
  • Waterproofing (60 kPa, 24 h) to EN 1928: Pass.
  • Crushing strength to ISO 25619-2: >90 kPa.
  • Resistance to deformation under a load (50 kPa, 1000 h) to EN 13967: <3 mm.
  • Thermal stability: -40 to +80°C; protect from UV.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 13 December 2017