A-Z Manufacturers (SURFASOLOGY) |  CAWS Index (J30 110)
SURFASOLOGY

SURFASOLOGY

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Unit 143, Grange Drive, Baldoyle Industrial Estate, Dublin 13

This NBS Plus page covers cementitious waterproof coating

relating to clause 110 COLD APPLIED TANKING

in J30 Liquid applied damp proofing.

For more NBS Plus information from this company, see the SURFASOLOGY overview page which includes a clause list and a product list.

 

View larger image of Maxseal Flex from SURFASOLOGYMaxseal Flex

Two-component, flexible, cementitious waterproof coating against positive and negative pressure for concrete and masonry. Can be applied using a fibre-bristled brush or spray.Features and benefits:Fully flexible waterproof coating.Approved for use with drinking water. Listed in the Water Regulations Advisory Scheme (WRAS) for contact with potable water, tested under BS 6920.Suitable for all water pressure applications.Covers shrinkage and hairline cracks of concrete.Withstands atmospheric pollution.Effective against the corrosive effects of salt water and de-icing salts.Environmentally friendly, non-toxic and chloride free.Excellent adhesion and easy to apply.Root resistance when detailed with Drizoro Mesh.CE marked.Applications:Suitable for above and below ground applications.Technical characteristics:Coverage: 1–1.5 kg/m² (per coat).Appearance: Component A: White liquid. Component B: Grey cement-based material.Application temperature: >10°C.Adhesion to substrates (mortar breakage): Concrete (to ASTM D-4541) 2.0 N/mm²; Maxseal Flex (to ASTM D-4541): 1.8 N/mm²; Steel panel (to HKHA MTS 97/99): 1.73 N/mm².Bending test on re-bar (8 mm): 20% elongation without cracks.Resistance to sulfates: Classified as 'High Resistance'.Elongation at break: 59 ± 5².0CE marked89/106/CEMaxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface0Bridge Protection Code 1994 and 2004 (Sweden)0ASTM C1202 – Resistance to Sulfates0WRASApproved

Two-component, flexible, cementitious waterproof coating against positive and negative pressure for concrete and masonry.

Can be applied using a fibre-bristled brush or spray.

Features and benefits:

  • Fully flexible waterproof coating.
  • Approved for use with drinking water. Listed in the Water Regulations Advisory Scheme (WRAS) for contact with potable water, tested under BS 6920.
  • Suitable for all water pressure applications.
  • Covers shrinkage and hairline cracks of concrete.
  • Withstands atmospheric pollution.
  • Effective against the corrosive effects of salt water and de-icing salts.
  • Environmentally friendly, non-toxic and chloride free.
  • Excellent adhesion and easy to apply.
  • Root resistance when detailed with Drizoro Mesh.
  • CE marked.

Applications:

Suitable for above and below ground applications.

More about Maxseal Flex:
As standard - Approvals - Further information.

PendingCEMENTITIOUS WATERPROOF COATING:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
Maxseal Flex.
 Drizo Mesh:
[Not required].
[Required].


top ^

Guidance

for Maxseal Flex

from SURFASOLOGY

More about Maxseal Flex: As standard - Approvals - Further information.

As standard

Technical characteristics:

  • Coverage: 1–1.5 kg/m² (per coat).
  • Appearance: Component A: White liquid. Component B: Grey cement-based material.
  • Application temperature: >10°C.
  • Adhesion to substrates (mortar breakage): Concrete (to ASTM D-4541) 2.0 N/mm²; Maxseal Flex (to ASTM D-4541): 1.8 N/mm²; Steel panel (to HKHA MTS 97/99): 1.73 N/mm².
  • Bending test on re-bar (8 mm): 20% elongation without cracks.
  • Resistance to sulfates: Classified as 'High Resistance'.
  • Elongation at break: 59 ± 5².

Approvals

  • CE marked: 89/106/CE Maxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface.
  • Bridge Protection Code 1994 and 2004 (Sweden) .
  • ASTM C1202 – Resistance to Sulfates .
  • WRAS: Approved .

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017