A-Z Manufacturers (SURFASOLOGY) |  CAWS Index (J10 110)
SURFASOLOGY

SURFASOLOGY

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Unit 143, Grange Drive, Baldoyle Industrial Estate, Dublin 13

This NBS Plus page covers cementitious mortar, cementitious waterproof coating, waterproof coating and waterproofing slurry

relating to clause 110 PROPRIETARY MORTAR

in J10 Cementitious mortar tanking/ damp proofing.

For more NBS Plus information from this company, see the SURFASOLOGY overview page which includes a clause list and a product list.


Products from SURFASOLOGY

Bookmark
CEMdicht 3 in 1 - Multi-purpose, dry cementitious mortar.
Bookmark
Maxseal Flex - Two-component, flexible, cementitious waterproof coating.
Bookmark
Maxseal M AntiSulphate - Waterproof coating with sulphate resistant cement.
Bookmark
Maxseal Super - Waterproof coating with crystallization and osmotic properties.
Bookmark
Velosit® WP 121 - Rapid, flexible, cementitious waterproofing slurry.
 

View larger image of CEMdicht 3 in 1 from SURFASOLOGYCEMdicht 3 in 1

Mineral based waterproofing product, used for the protection of structures against ground dampness, pressing water and non-pressing water. Can be applied to waterproof concrete and as a remedial waterproof coating.A dry, grey cementitious powder mortar that can be used with the following components to create three different end products:Powder and water creates a firm mineral sealant silt.Powder and CEMdicht flex creates a flexible sealant slurry.Powder and CEMdicht flex+ creates a flexible and crystalline sealant slurry.By adding the liquid component CEMdicht flex, the mineral sealant silt will become so flexible that it can be applied to highly stressed, crack prone underground areas. The liquid component CEMdicht flex+ has crystalline characteristics, allowing the structure to self-heal shrinkage cracks.The product holds the General Building Code Test Certificate (abP).Features and benefits:Comes in ready to use 30 kg bags.Application can be by brushing, trowelling or spraying.Can be applied directly on to reinforced concrete (to DIN 1045), well pointed masonry (to DIN 1053), and cement plaster and render (to DIN 18550).Suitable as waterproofing coating for underground screeds, plasters of the mortar groups PI, PII and PIII, as well as for tiles and slabs.Applications: Typical application fields include waterproofing of concrete: Vertical waterproofing of earth touching constructions.Exterior and interior walls.Slabs and foundations. Vertical waterproofing of splash water areas at wall bases. Cross section of walls and slabs.Water tanks. During construction work.Colour:Grey.Coverage (dry mortar):For ground dampness and non-pressure water flow: Approximately 4 kg/m² (2 mm layer thickness).For pressure water flow: Approximately 7 kg/m² (4 mm layer thickness).Application temperature:Above 5°C.

Mineral based waterproofing product, used for the protection of structures against ground dampness, pressing water and non-pressing water. Can be applied to waterproof concrete and as a remedial waterproof coating.

A dry, grey cementitious powder mortar that can be used with the following components to create three different end products:

  • Powder and water creates a firm mineral sealant silt.
  • Powder and CEMdicht flex creates a flexible sealant slurry.
  • Powder and CEMdicht flex+ creates a flexible and crystalline sealant slurry.

By adding the liquid component CEMdicht flex, the mineral sealant silt will become so flexible that it can be applied to highly stressed, crack prone underground areas. The liquid component CEMdicht flex+ has crystalline characteristics, allowing the structure to self-heal shrinkage cracks.

The product holds the General Building Code Test Certificate (abP).

Features and benefits:

  • Comes in ready to use 30 kg bags.
  • Application can be by brushing, trowelling or spraying.
  • Can be applied directly on to reinforced concrete (to DIN 1045), well pointed masonry (to DIN 1053), and cement plaster and render (to DIN 18550).
  • Suitable as waterproofing coating for underground screeds, plasters of the mortar groups PI, PII and PIII, as well as for tiles and slabs.

Applications:

Typical application fields include waterproofing of concrete:

  • Vertical waterproofing of earth touching constructions.
  • Exterior and interior walls.
  • Slabs and foundations.
  • Vertical waterproofing of splash water areas at wall bases.
  • Cross section of walls and slabs.
  • Water tanks.
  • During construction work.

More about CEMdicht 3 in 1:
As standard - Further information.

PendingCEMENTITIOUS MORTAR:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
CEMdicht 3 in 1.
 Liquid component:
[Not required].
[CEMdicht flex]. - For a flexible sealant slurry.
[CEMdicht flex+]. - For a crystalline sealant slurry.


top ^

Guidance

for CEMdicht 3 in 1

from SURFASOLOGY

More about CEMdicht 3 in 1: As standard - Further information.

As standard

Colour:

Grey.

Coverage (dry mortar):

  • For ground dampness and non-pressure water flow: Approximately 4 kg/m² (2 mm layer thickness).
  • For pressure water flow: Approximately 7 kg/m² (4 mm layer thickness).

Application temperature:

Above 5°C.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of Maxseal Flex from SURFASOLOGYMaxseal Flex

Two-component, flexible, cementitious waterproof coating against positive and negative pressure for concrete and masonry. Can be applied using a fibre-bristled brush or spray.Features and benefits:Fully flexible waterproof coating.Approved for use with drinking water. Listed in the Water Regulations Advisory Scheme (WRAS) for contact with potable water, tested under BS 6920.Suitable for all water pressure applications.Covers shrinkage and hairline cracks of concrete.Withstands atmospheric pollution.Effective against the corrosive effects of salt water and de-icing salts.Environmentally friendly, non-toxic and chloride free.Excellent adhesion and easy to apply.Root resistance when detailed with Drizoro Mesh.CE marked.Applications:Suitable for above and below ground applications.Technical characteristics:Coverage: 1–1.5 kg/m² (per coat).Appearance: Component A: White liquid. Component B: Grey cement-based material.Application temperature: >10°C.Adhesion to substrates (mortar breakage): Concrete (to ASTM D-4541) 2.0 N/mm²; Maxseal Flex (to ASTM D-4541): 1.8 N/mm²; Steel panel (to HKHA MTS 97/99): 1.73 N/mm².Bending test on re-bar (8 mm): 20% elongation without cracks.Resistance to sulfates: Classified as 'High Resistance'.Elongation at break: 59 ± 5².0CE marked89/106/CEMaxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface0Bridge Protection Code 1994 and 2004 (Sweden)0ASTM C1202 – Resistance to Sulfates0WRASApproved

Two-component, flexible, cementitious waterproof coating against positive and negative pressure for concrete and masonry.

Can be applied using a fibre-bristled brush or spray.

Features and benefits:

  • Fully flexible waterproof coating.
  • Approved for use with drinking water. Listed in the Water Regulations Advisory Scheme (WRAS) for contact with potable water, tested under BS 6920.
  • Suitable for all water pressure applications.
  • Covers shrinkage and hairline cracks of concrete.
  • Withstands atmospheric pollution.
  • Effective against the corrosive effects of salt water and de-icing salts.
  • Environmentally friendly, non-toxic and chloride free.
  • Excellent adhesion and easy to apply.
  • Root resistance when detailed with Drizoro Mesh.
  • CE marked.

Applications:

Suitable for above and below ground applications.

More about Maxseal Flex:
As standard - Approvals - Further information.

PendingCEMENTITIOUS WATERPROOF COATING:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
Maxseal Flex.
 Drizo Mesh:
[Not required].
[Required].


top ^

Guidance

for Maxseal Flex

from SURFASOLOGY

More about Maxseal Flex: As standard - Approvals - Further information.

As standard

Technical characteristics:

  • Coverage: 1–1.5 kg/m² (per coat).
  • Appearance: Component A: White liquid. Component B: Grey cement-based material.
  • Application temperature: >10°C.
  • Adhesion to substrates (mortar breakage): Concrete (to ASTM D-4541) 2.0 N/mm²; Maxseal Flex (to ASTM D-4541): 1.8 N/mm²; Steel panel (to HKHA MTS 97/99): 1.73 N/mm².
  • Bending test on re-bar (8 mm): 20% elongation without cracks.
  • Resistance to sulfates: Classified as 'High Resistance'.
  • Elongation at break: 59 ± 5².

Approvals

  • CE marked: 89/106/CE Maxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface.
  • Bridge Protection Code 1994 and 2004 (Sweden) .
  • ASTM C1202 – Resistance to Sulfates .
  • WRAS: Approved .

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of Maxseal M AntiSulphate from SURFASOLOGYMaxseal M AntiSulphate

One-component, cement-based waterproof coating for concrete and masonry, resistant to sulphates and approved for use with drinking water. Can be applied using brush or spray.Features and benefits:Fully waterproof coating which is permeable to water vapour.Suitable for positive and negative water pressure applications.Covers shrinkage and hairline cracks of concrete.Withstands atmospheric pollution.Effective against the corrosive effects of salt water and de-icing salts.Environmentally friendly, non-toxic and chloride free.Resistant to sulphates. Excellent adhesion and easy to apply.CE marked to UNE-EN 1504-2.Applications:Suitable for above and below ground applications. Surfaces treated with Maxseal M AntiSulphate should be protected from rain for at least 24 hours after application.Technical characteristics:Coverage: 1–1.5 kg/m² (per coat).Appearance: Grey powder.Application temperature: >5°C.Curing time: 12–16 hours.Adhesion to concrete (to EN 1015-12): 2.47.Flexural strength: 7.55 N/mm² (at 28 days).Compressive strength: 40.7 N/mm² (at 28 days).Resistance to sulphates: Classified as 'High Resistance'.0CE marked89/106/CEMaxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface

One-component, cement-based waterproof coating for concrete and masonry, resistant to sulphates and approved for use with drinking water.

Can be applied using brush or spray.

Features and benefits:

  • Fully waterproof coating which is permeable to water vapour.
  • Suitable for positive and negative water pressure applications.
  • Covers shrinkage and hairline cracks of concrete.
  • Withstands atmospheric pollution.
  • Effective against the corrosive effects of salt water and de-icing salts.
  • Environmentally friendly, non-toxic and chloride free.
  • Resistant to sulphates.
  • Excellent adhesion and easy to apply.
  • CE marked to UNE-EN 1504-2.

Applications:

Suitable for above and below ground applications. Surfaces treated with Maxseal M AntiSulphate should be protected from rain for at least 24 hours after application.

More about Maxseal M AntiSulphate:
As standard - Approvals - Further information.

PendingWATERPROOF COATING:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
Maxseal M AntiSulphate.


top ^

Guidance

for Maxseal M AntiSulphate

from SURFASOLOGY

More about Maxseal M AntiSulphate: As standard - Approvals - Further information.

As standard

Technical characteristics:

  • Coverage: 1–1.5 kg/m² (per coat).
  • Appearance: Grey powder.
  • Application temperature: >5°C.
  • Curing time: 12–16 hours.
  • Adhesion to concrete (to EN 1015-12): 2.47.
  • Flexural strength: 7.55 N/mm² (at 28 days).
  • Compressive strength: 40.7 N/mm² (at 28 days).
  • Resistance to sulphates: Classified as 'High Resistance'.

Approvals

  • CE marked: 89/106/CE Maxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of Maxseal Super from SURFASOLOGYMaxseal Super

Cement-based, waterproof coating with crystallization and osmotic properties, designed for use on concrete and masonry surfaces. Consisting of a mix of selected cements, aggregates, chemical additives and water. The mixed material penetrates the concrete through its capillaries and crystallizes, sealing and waterproofing the concrete.Can be applied using fibre-bristled brush or spray.Features and benefits:100% waterproof coating.Approved for use with drinking water in accordance with BS 6920 and R.D. 140/2003.Suitable for positive and negative water pressure applications.Seals cracks up to 0.4 mm.Resists the corrosive effects of salt water and atmospheric pollution.Environmentally friendly and non-toxic.Excellent adhesion and easy to apply.Can be painted over if required.Applications:Suitable for above and below ground applications. Surfaces treated with Maxseal Super, should be protected from rain for at least 24 hours after application.Technical characteristics:Coverage: 1–1.5 kg/m² (per coat).Appearance: Grey cement-.based material.Application temperature: >10°C.Curing time: 6–24 hours.Adhesion to concrete: >2 MPa.Flexural strength: >8 MPa.Compressive strength: >40 MPa.0CE marked89/106/CEMaxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface

Cement-based, waterproof coating with crystallization and osmotic properties, designed for use on concrete and masonry surfaces. Consisting of a mix of selected cements, aggregates, chemical additives and water. The mixed material penetrates the concrete through its capillaries and crystallizes, sealing and waterproofing the concrete.

Can be applied using fibre-bristled brush or spray.

Features and benefits:

  • 100% waterproof coating.
  • Approved for use with drinking water in accordance with BS 6920 and R.D. 140/2003.
  • Suitable for positive and negative water pressure applications.
  • Seals cracks up to 0.4 mm.
  • Resists the corrosive effects of salt water and atmospheric pollution.
  • Environmentally friendly and non-toxic.
  • Excellent adhesion and easy to apply.
  • Can be painted over if required.

Applications:

Suitable for above and below ground applications. Surfaces treated with Maxseal Super, should be protected from rain for at least 24 hours after application.

More about Maxseal Super:
As standard - Approvals - Further information.

PendingWATERPROOF COATING:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
Maxseal Super.


top ^

Guidance

for Maxseal Super

from SURFASOLOGY

More about Maxseal Super: As standard - Approvals - Further information.

As standard

Technical characteristics:

  • Coverage: 1–1.5 kg/m² (per coat).
  • Appearance: Grey cement-.based material.
  • Application temperature: >10°C.
  • Curing time: 6–24 hours.
  • Adhesion to concrete: >2 MPa.
  • Flexural strength: >8 MPa.
  • Compressive strength: >40 MPa.

Approvals

  • CE marked: 89/106/CE Maxseal Flex fulfils the directive 89/106/CE for Construction Products, meeting all the prescribed requirements relative to the application of the European Standard UNE-EN 1504-2 for mortar for the protection of concrete surface.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of Velosit® WP 121 from SURFASOLOGYVelosit® WP 121

Polymer-modified cementitious waterproofing slurry for concrete and masonry, with fast curing properties making it suitable for cool and humid environments. Can be applied by brush, trowel or spray equipment.Features and benefits:Highly flexible and easy to apply.Crack bridging and a barrier to carbon dioxide.Final strength achieved within 2–3 days.Ready for water pressure after one day.Resists 50 m (106 ft) water pressure in accordance to EN 12390-8.Good adhesion to concrete and masonry.Creates an abrasion resistant coating on the substrate.30 minute working time.Weathering and UV resistant.Potable water approved.Sulfate resistant.Resistance against aggressive media with a pH range of 3–12 and against soft water with low iron content.Applications:Waterproofing of basements, below-grade parking structures, potable water structures, green roofs and swimming pools.Protective coating on dams and spill-ways.Coating of tanks for manure and sewage.Waterproofing underneath tiles and natural stones.Protection against rising dampness.Coating of trafficable flat roofs.Technical characteristics:Thickness (recommended): Damp-proofing: 1.25 mm; <250 mm water: 1.5 mm; hydrostatic pressure: 2 mm; hydrostatic pressure and water flow or light mechanical abrasion: 2.5 mm.Appearance: Grey powder.Density: 1.5 kg/L.Substrate temperature: 5–35°C.Water permeability (to EN 12390-8): 5 bar (positive); 1.5 bar (negative).Tensile strength: 2.0 MPa.Tensile elongation: 65%.Crack bridging: 0.4 mm/ 24 hours (to DIN 28052-6); 2.4 mm (to ASTM C836).SD-value (to water, 2 mm): 3 m.SD-value (to CO2, 2 mm): 250 m.Chloride ions: <0.05%.Carbonation resistance: Pass.Capillary water absorption: 0.02 kg/m² x h ^0,5.Adhesive strength: 2.8 MPa.Restrained shrinkage: 1.7 MPa.10VELOSIT WP 121 surpasses the requirements of EN 1504-2 for coatings and can be used according to the principles 3.1 and 3.3 to EN 1504-9

Polymer-modified cementitious waterproofing slurry for concrete and masonry, with fast curing properties making it suitable for cool and humid environments.

Can be applied by brush, trowel or spray equipment.

Features and benefits:

  • Highly flexible and easy to apply.
  • Crack bridging and a barrier to carbon dioxide.
  • Final strength achieved within 2–3 days.
  • Ready for water pressure after one day.
  • Resists 50 m (106 ft) water pressure in accordance to EN 12390-8.
  • Good adhesion to concrete and masonry.
  • Creates an abrasion resistant coating on the substrate.
  • 30 minute working time.
  • Weathering and UV resistant.
  • Potable water approved.
  • Sulfate resistant.
  • Resistance against aggressive media with a pH range of 3–12 and against soft water with low iron content.

Applications:

  • Waterproofing of basements, below-grade parking structures, potable water structures, green roofs and swimming pools.
  • Protective coating on dams and spill-ways.
  • Coating of tanks for manure and sewage.
  • Waterproofing underneath tiles and natural stones.
  • Protection against rising dampness.
  • Coating of trafficable flat roofs.

More about Velosit® WP 121:
As standard - Approvals - Further information.

PendingWATERPROOFING SLURRY:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
Velosit® WP 121.


top ^

Guidance

for Velosit® WP 121

from SURFASOLOGY

More about Velosit® WP 121: As standard - Approvals - Further information.

As standard

Technical characteristics:

  • Thickness (recommended): Damp-proofing: 1.25 mm; <250 mm water: 1.5 mm; hydrostatic pressure: 2 mm; hydrostatic pressure and water flow or light mechanical abrasion: 2.5 mm.
  • Appearance: Grey powder.
  • Density: 1.5 kg/L.
  • Substrate temperature: 5–35°C.
  • Water permeability (to EN 12390-8): 5 bar (positive); 1.5 bar (negative).
  • Tensile strength: 2.0 MPa.
  • Tensile elongation: 65%.
  • Crack bridging: 0.4 mm/ 24 hours (to DIN 28052-6); 2.4 mm (to ASTM C836).
  • SD-value (to water, 2 mm): 3 m.
  • SD-value (to CO2, 2 mm): 250 m.
  • Chloride ions: <0.05%.
  • Carbonation resistance: Pass.
  • Capillary water absorption: 0.02 kg/m² x h ^0,5.
  • Adhesive strength: 2.8 MPa.
  • Restrained shrinkage: 1.7 MPa.

Approvals

  • British Standards Institution: VELOSIT WP 121 surpasses the requirements of EN 1504-2 for coatings and can be used according to the principles 3.1 and 3.3 to EN 1504-9. British Standards Institution

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 12 December 2017