A-Z Manufacturers (SURFASOLOGY) |  CAWS Index (E40 310)
SURFASOLOGY

SURFASOLOGY

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Unit 143, Grange Drive, Baldoyle Industrial Estate, Dublin 13

This NBS Plus page covers injection tube system, injection hose system and pvc based waterbar

relating to clause 310 FLEXIBLE WATERSTOPS

in E40 Designed joints in in situ concrete.

For more NBS Plus information from this company, see the SURFASOLOGY overview page which includes a clause list and a product list.


Products from SURFASOLOGY

Bookmark
CEM 11 - Injection tube system.
Bookmark
CEM 19 - Injection hose system.
Bookmark
Predimax 11 - Injection hose system.
Bookmark
Predimax 19 - Injection hose system.
Bookmark
PVC Waterstops - PVC-based waterbars.
 

View larger image of CEM 11 from SURFASOLOGYCEM 11

A blue PVC-based injection hose, with an inner diameter of 5 mm and an outer diameter of 11 mm, installed in the construction joints of a concrete structure during the construction stage. This allows the joints to be injected with resin at a later stage if required.The injection material is pumped into the hose through the injection pieces that are located in the injection port boxes.The system includes the following:A single-wall smooth hose, with cone-shaped openings.Plastic injection port boxes.Ventilation hose.Injection port and nipple.Hose cap and fixing clips.Features and benefits:Suitable for use in both vertical and horizontal construction joints.Unique design prevents the fresh concrete paste from entering the system.Suitable for above ground and below ground use.Circular hose – no unwanted twisting.Smooth surface on the hose to prevent bonding between the hose and the concrete.Easy to install.Manufacturing process certified to DIN ISO 9001.Materials that may be injected: PU/ EP resins, acrylates and gels. Cements not allowed.Technical characteristics:Maximum length for installing the hose: 10 m. Consult manufacturer for details.Arrangement of perforations/ slots (inner hose): 5 mm perforations/ slots every 25 mm.

A blue PVC-based injection hose, with an inner diameter of 5 mm and an outer diameter of 11 mm, installed in the construction joints of a concrete structure during the construction stage. This allows the joints to be injected with resin at a later stage if required.

The injection material is pumped into the hose through the injection pieces that are located in the injection port boxes.

The system includes the following:

  • A single-wall smooth hose, with cone-shaped openings.
  • Plastic injection port boxes.
  • Ventilation hose.
  • Injection port and nipple.
  • Hose cap and fixing clips.

Features and benefits:

  • Suitable for use in both vertical and horizontal construction joints.
  • Unique design prevents the fresh concrete paste from entering the system.
  • Suitable for above ground and below ground use.
  • Circular hose – no unwanted twisting.
  • Smooth surface on the hose to prevent bonding between the hose and the concrete.
  • Easy to install.
  • Manufacturing process certified to DIN ISO 9001.
  • Materials that may be injected: PU/ EP resins, acrylates and gels. Cements not allowed.

More about CEM 11:
As standard - Further information.

PendingINJECTION TUBE SYSTEM:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
CEM 11.


top ^

Guidance

for CEM 11

from SURFASOLOGY

More about CEM 11: As standard - Further information.

As standard

Technical characteristics:

  • Maximum length for installing the hose: 10 m. Consult manufacturer for details.
  • Arrangement of perforations/ slots (inner hose): 5 mm perforations/ slots every 25 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of CEM 19 from SURFASOLOGYCEM 19

A blue PVC-based injection hose, with an inner diameter of 11 mm and an outer diameter of 19 mm, installed in the construction joints of a concrete structure during the construction stage. This allows the joints to be injected with resin or fine cement at a later stage if required.The injection material is pumped into the hose through the injection pieces that are located in the injection port boxes.The system includes the following:A single-wall PVC smooth hose, with cone-shaped openings (prevents cement paste from the concrete entering the hose).Plastic injection port boxes.Injection and ventilation hoses.Injection piece (port and nipple).Hose cap and fixing clips.Features and benefits:Suitable for use in both vertical and horizontal construction joints.Unique design prevents the fresh concrete paste from entering the system.Suitable for above ground and below ground use.Circular hose – no unwanted twisting.Smooth surface on the hose to prevent bonding between the hose and the concrete.Easy to install.Manufacturing process certified to DIN ISO 9001.Materials that may be injected: PU/ EP resins, acrylates, gels and micro-fine cements.Technical characteristics:Maximum length for installing the hose: 10 m. Consult manufacturer for details.Arrangement of perforations/ slots (inner hose): 5 mm perforations/ slots every 12–14 mm.

A blue PVC-based injection hose, with an inner diameter of 11 mm and an outer diameter of 19 mm, installed in the construction joints of a concrete structure during the construction stage. This allows the joints to be injected with resin or fine cement at a later stage if required.

The injection material is pumped into the hose through the injection pieces that are located in the injection port boxes.

The system includes the following:

  • A single-wall PVC smooth hose, with cone-shaped openings (prevents cement paste from the concrete entering the hose).
  • Plastic injection port boxes.
  • Injection and ventilation hoses.
  • Injection piece (port and nipple).
  • Hose cap and fixing clips.

Features and benefits:

  • Suitable for use in both vertical and horizontal construction joints.
  • Unique design prevents the fresh concrete paste from entering the system.
  • Suitable for above ground and below ground use.
  • Circular hose – no unwanted twisting.
  • Smooth surface on the hose to prevent bonding between the hose and the concrete.
  • Easy to install.
  • Manufacturing process certified to DIN ISO 9001.
  • Materials that may be injected: PU/ EP resins, acrylates, gels and micro-fine cements.

More about CEM 19:
As standard - Further information.

PendingINJECTION HOSE SYSTEM:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
CEM 19.


top ^

Guidance

for CEM 19

from SURFASOLOGY

More about CEM 19: As standard - Further information.

As standard

Technical characteristics:

  • Maximum length for installing the hose: 10 m. Consult manufacturer for details.
  • Arrangement of perforations/ slots (inner hose): 5 mm perforations/ slots every 12–14 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of Predimax 11 from SURFASOLOGYPredimax 11

A double-jacket green PVC hose, which has a 6 mm inner and an 11 mm outer diameter core. It is installed in the construction joints of a concrete structure during the construction stage, which allows the joints to be injected with a resin or cement at a later stage if required.The patented design prevents the paste from the concrete entering the interior hose and blocking the hose. The injection material is pumped into the inner hose through the injection nipple, and exits through the perforations/ slots in the exterior sleeve, then seals the joint.The system includes the following:A high-quality interior PVC hose, which has perforations/ slots at equal spacings. The hose is covered with a PVC sleeve which has offset perforations/ slots.Plastic injection port boxes.Ventilation hose.Injection port and nipple.Hose cap and fixing clips.Features and benefits:Available in two designs: 6 or 11 mm diameter inner core hose.Unique design prevents the fresh concrete paste from entering the system.Can be used for multiple injections.Unique, patented technology manufactured in Switzerland.Suitable for above-ground and below-ground use.Circular hose – no unwanted twisting.Smooth surface on the hose to prevent bonding between the hose and the concrete.Manufacturing process certified to DIN ISO 9001.Easy to install.Materials that may be injected: Resins, acrylates, fine cements and Cemproof cement lime.Technical characteristics:Weight: 0.11 kg/m.Maximum length for installing the hose: 12 m. Consult manufacturer for details.Arrangement of perforations/ slots (inner hose): Staggered at 90°, 20 per 100 mm length.

A double-jacket green PVC hose, which has a 6 mm inner and an 11 mm outer diameter core. It is installed in the construction joints of a concrete structure during the construction stage, which allows the joints to be injected with a resin or cement at a later stage if required.

The patented design prevents the paste from the concrete entering the interior hose and blocking the hose. The injection material is pumped into the inner hose through the injection nipple, and exits through the perforations/ slots in the exterior sleeve, then seals the joint.

The system includes the following:

  • A high-quality interior PVC hose, which has perforations/ slots at equal spacings. The hose is covered with a PVC sleeve which has offset perforations/ slots.
  • Plastic injection port boxes.
  • Ventilation hose.
  • Injection port and nipple.
  • Hose cap and fixing clips.

Features and benefits:

  • Available in two designs: 6 or 11 mm diameter inner core hose.
  • Unique design prevents the fresh concrete paste from entering the system.
  • Can be used for multiple injections.
  • Unique, patented technology manufactured in Switzerland.
  • Suitable for above-ground and below-ground use.
  • Circular hose – no unwanted twisting.
  • Smooth surface on the hose to prevent bonding between the hose and the concrete.
  • Manufacturing process certified to DIN ISO 9001.
  • Easy to install.
  • Materials that may be injected: Resins, acrylates, fine cements and Cemproof cement lime.

More about Predimax 11:
As standard - Further information.

PendingINJECTION HOSE SYSTEM:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
Predimax 11.


top ^

Guidance

for Predimax 11

from SURFASOLOGY

More about Predimax 11: As standard - Further information.

As standard

Technical characteristics:

  • Weight: 0.11 kg/m.
  • Maximum length for installing the hose: 12 m. Consult manufacturer for details.
  • Arrangement of perforations/ slots (inner hose): Staggered at 90°, 20 per 100 mm length.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of Predimax 19 from SURFASOLOGYPredimax 19

A double-jacket green PVC hose, which has an 11 mm inner and 19 mm outer diameter core. It is installed in the construction joints of a concrete structure during the construction stage, which allows the joints to be injected with a resin or cement at a later stage if required.The patented design prevents the paste from the concrete entering the interior hose and blocking the hose. The injection material is pumped into the inner hose through the injection nipple, and exits through the perforations/ slots in the exterior sleeve, then seals the joint.The system includes the following:A high-quality interior PVC hose, which has perforations/ slots at equal spacings. The hose is covered with a PVC sleeve which has offset perforations/ slots.Plastic injection port boxes.Ventilation hose.Injection port and nipple.Hose cap and fixing clips.Features and benefits:Available in two designs: 6 or 11 mm diameter inner core hose.Unique design prevents the fresh concrete paste from entering the system.Can be used for multiple injections.Unique, patented technology manufactured in Switzerland.Suitable for above-ground and below-ground use.Circular hose – no unwanted twisting.Smooth surface on the hose to prevent bonding between the hose and the concrete.Manufacturing process certified to DIN ISO 9001.Easy to install.Materials that may be injected: Resins, acrylates, fine cements and Cemproof cement lime.Technical characteristics:Weight: 0.25 kg/m.Maximum length for installing the hose: 15 m. Consult manufacturer for details.Arrangement of perforations/ slots (inner hose): Staggered at 90°, 20 per 100 mm length.

A double-jacket green PVC hose, which has an 11 mm inner and 19 mm outer diameter core. It is installed in the construction joints of a concrete structure during the construction stage, which allows the joints to be injected with a resin or cement at a later stage if required.

The patented design prevents the paste from the concrete entering the interior hose and blocking the hose. The injection material is pumped into the inner hose through the injection nipple, and exits through the perforations/ slots in the exterior sleeve, then seals the joint.

The system includes the following:

  • A high-quality interior PVC hose, which has perforations/ slots at equal spacings. The hose is covered with a PVC sleeve which has offset perforations/ slots.
  • Plastic injection port boxes.
  • Ventilation hose.
  • Injection port and nipple.
  • Hose cap and fixing clips.

Features and benefits:

  • Available in two designs: 6 or 11 mm diameter inner core hose.
  • Unique design prevents the fresh concrete paste from entering the system.
  • Can be used for multiple injections.
  • Unique, patented technology manufactured in Switzerland.
  • Suitable for above-ground and below-ground use.
  • Circular hose – no unwanted twisting.
  • Smooth surface on the hose to prevent bonding between the hose and the concrete.
  • Manufacturing process certified to DIN ISO 9001.
  • Easy to install.
  • Materials that may be injected: Resins, acrylates, fine cements and Cemproof cement lime.

More about Predimax 19:
As standard - Further information.

PendingINJECTION HOSE SYSTEM:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
Predimax 19.


top ^

Guidance

for Predimax 19

from SURFASOLOGY

More about Predimax 19: As standard - Further information.

As standard

Technical characteristics:

  • Weight: 0.25 kg/m.
  • Maximum length for installing the hose: 15 m. Consult manufacturer for details.
  • Arrangement of perforations/ slots (inner hose): Staggered at 90°, 20 per 100 mm length.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

top ^

 

View larger image of PVC Waterstops from SURFASOLOGYPVC Waterstops

CEMproof PVC Waterbars are a range of internally and externally placed PVC waterstops used for the protection of both movement and non-movement joints in reinforced concrete structures.The waterbars are placed in order that half the element is encapsulated by the fresh concrete and the other half is exposed where it will be encapsulated by the subsequent pour of concrete.They form a physical obstruction which prevents water from passing through the joint in the concrete.Technical characteristics:Size: Joint belts according to company standard are toleranced regarding DIN 16941.Material: PVC-P NB is not bitumen-resistant. PVC BV bitumen resistance available upon request.Breaking elongation according to DIN EN ISO 527-2: ≥275%.Tensile strength according to DIN EN ISO 527-2: 10 N/mm².Shore A hardness according to DIN 53505: 72 ±5°.

CEMproof PVC Waterbars are a range of internally and externally placed PVC waterstops used for the protection of both movement and non-movement joints in reinforced concrete structures.

The waterbars are placed in order that half the element is encapsulated by the fresh concrete and the other half is exposed where it will be encapsulated by the subsequent pour of concrete.

They form a physical obstruction which prevents water from passing through the joint in the concrete.

More about PVC Waterstops:
As standard - Further information.

PendingPVC BASED WATERBAR:
 Manufacturer:
SURFASOLOGY.
  -Web:http://www.surfasology.com/.
  -Tel:+353 (0)1 832 10 05.
  -Product reference:
[CEMproof PVC Expansion Joint Waterbar (Internal)].
[CEMproof PVC Non-Movement Joint Waterbar (Internal)].
 Type:
[A 10 NB]. - Width: 100 mm, expansion element width: 20 mm, thickness of expansion element: 3 mm; outside thickness: 2.5 mm.
[A 11 NB]. - Width: 110 mm, expansion element width: 25 mm, thickness of expansion element: 3 mm; outside thickness: 2.5 mm.
[A 15 NB]. - Width: 150 mm, expansion element width: 45 mm, thickness of expansion element: 3 mm; outside thickness: 2.5 mm.
 Accessories:
[None].
[Corner pieces].
[Fixing clips].


top ^

Guidance

for PVC Waterstops

from SURFASOLOGY

More about PVC Waterstops: As standard - Further information.

As standard

Technical characteristics:

  • Size: Joint belts according to company standard are toleranced regarding DIN 16941.
  • Material: PVC-P NB is not bitumen-resistant. PVC BV bitumen resistance available upon request.
  • Breaking elongation according to DIN EN ISO 527-2: ≥275%.
  • Tensile strength according to DIN EN ISO 527-2: 10 N/mm².
  • Shore A hardness according to DIN 53505: 72 ±5°.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for SURFASOLOGY from ribaproductselector.com.

Contacts:

http://www.surfasology.com/

sales@surfasology.com

T: +353 (0)1 832 10 05

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 14 December 2017