Renson Fabrications Ltd
www.rensonuk.net
info@rensonuk.net
T: +44 (0)1622 754123
F: +44 (0)1622 689478
Fairfax Units 1 - 5, Bircholt Road, Parkwood Industrial Estate, Maidstone, Kent. ME15 9SF
This NBS Plus page covers floor grille
relating to clause 370 ACCESS COVERS/ GRATINGS FOR
in P31 Holes, chases, covers and supports for services.
For more NBS Plus information from this company, see the
Renson Fabrications Ltd overview page which includes a clause list and a
product list.
Products from Renson Fabrications LtdRenson Fabrications Ltd offers a design and specification service; consultation early in the design process is recommended. | |
| Aluminium floor grille with optional frame.Suitable for use as floor drain cover in abattoir, cellar, garage or swimming pool. Suitable for use over underfloor wiring duct in computer room. Physical free area: 61 %.Grille: 20 x 8 mm bars at 20.5 mm centres, spanning short axis. Rubber gasket for impact noise suppression. Length (maximum): 1 m.Choice of frame. Lug type brackets allow frame to be cast-in. Length (maximum): 3.5 m.Frame lengths can be butted. Multiple grille panels can be accommodated within frame.Choice of colour.Made to measure.Material:Aluminium alloy: AlMgSi 0.5 to DIN 1748.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=12234&f=COL434023.pdf&pg= Aluminium floor grille with optional frame. - Suitable for use as floor drain cover in abattoir, cellar, garage or swimming pool. Suitable for use over underfloor wiring duct in computer room. Physical free area: 61 %.
- Grille: 20 x 8 mm bars at 20.5 mm centres, spanning short axis. Rubber gasket for impact noise suppression. Length (maximum): 1 m.
- Choice of frame. Lug type brackets allow frame to be cast-in. Length (maximum): 3.5 m.
- Frame lengths can be butted. Multiple grille panels can be accommodated within frame.
More about Aluminium Ventilation Grille 371:
As standard
- Further information.
 | FLOOR GRILLE:
| | | • | Manufacturer:
| Renson Fabrications Ltd. | | | | - | Web: | www.rensonuk.net. | | | | - | Tel: | +44 (0)1622 754123. | | | | - | Product reference:
|
[Aluminium Ventilation Grille 371].
| | | • | Dimensions:
|
[Single panel, to outer edge of frame (l x w), ??? x ??? mm].
[Single panel, rebate (l x w), ??? x ??? mm].
[Multiple panel within single frame, as drawing ???].
| | | • | Type:
|
[1, with flangeless angle frame].
- Requires supporting angle or edge rebate 25 x 24 (w x h). Can sit flush with finished floor.
[3, frameless].
- Requires suitable frame or rebate by others. | | | • | Finish (aluminium components):
|
[Aluminium, anodized, natural].
- 20 µ. Type E6/ C34 to DIN 17611.
[ ______ ]
- Requires suitable frame or rebate by others. | | | • | Finish (aluminium components):
|
[Aluminium, anodized, natural].
- 20 µ. Type E6/ C34 to DIN 17611.
[Polyester powder coating, RAL colour ???, sheen ??? %].
- 60–70 µ.
[Polyester powder coating, Syntha Pulvin colour ???, sheen ??? %].
- 60–70 µ. |
|
Guidance
for Aluminium Ventilation Grille 371
from Renson Fabrications Ltd
More about Aluminium Ventilation Grille 371:
As standard
- Further information.
Material:
Aluminium alloy: AlMgSi 0.5 to DIN 1748.
Literature:
Contacts:
www.rensonuk.net
info@rensonuk.net
T: +44 (0)1622 754123
F: +44 (0)1622 689478
top ^
| Aluminium floor grille, bars spanning long axis, light duty, with optional frame.Suitable for use over recessed convector heater or for ventilation. Physical free area: 76 %.Not suitable for foot traffic.Grille: Gravity lay. 16 x 3 mm bars at 13 mm centres, spanning long axis. Length (maximum): 1.6 m. Bars have 15 º crank for deflection of airflow.Flanged frame. Length (maximum): 3.5 m. Frame lengths can be butted. Multiple grille panels can be accommodated within frame.Choice of finish.Made to measure.Material:Aluminium alloy: AlMgSi 0.5 to DIN 1748.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=12234&f=COL434023.pdf&pg= Aluminium floor grille, bars spanning long axis, light duty, with optional frame. - Suitable for use over recessed convector heater or for ventilation. Physical free area: 76 %.
- Not suitable for foot traffic.
- Grille: Gravity lay. 16 x 3 mm bars at 13 mm centres, spanning long axis. Length (maximum): 1.6 m. Bars have 15 º crank for deflection of airflow.
- Flanged frame. Length (maximum): 3.5 m. Frame lengths can be butted. Multiple grille panels can be accommodated within frame.
More about Aluminium Linear Bar Grille 392:
As standard
- Further information.
| FLOOR GRILLE :
| | | • | Manufacturer:
| Renson Fabrications Ltd. | | | | - | Web: | www.rensonuk.net. | | | | - | Tel: | +44 (0)1622 754123. | | | | - | Product reference:
|
[Aluminium Linear Bar Grille 392].
| | | • | Dimensions:
|
[Single panel, to outer edge of frame (l x w), ??? x ??? mm].
[Single panel, rebate (l x w), ??? x ??? mm].
[Multiple panel within single frame, as drawing ???].
| | | • | Type:
|
[2, flanged Z frame].
- Flange supports grille. Flange laps edge of floor by 10 mm (maximum) and projects 1.5 mm above finished floor.
[3, frameless].
- Requires suitable frame or rebate by others. | | | • | Finish (aluminium components):
|
[Aluminium, anodized, natural].
- 20 µ. Type E6/ C34 to DIN 17611.
[Polyester powder coating, RAL colour ???, sheen ??? %].
- 60–70 µ.
[Polyester powder coating, Syntha Pulvin colour ???, sheen ??? %].
- 60–70 µ. |
|
Guidance
for Aluminium Linear Bar Grille 392
from Renson Fabrications Ltd
More about Aluminium Linear Bar Grille 392:
As standard
- Further information.
Material:
Aluminium alloy: AlMgSi 0.5 to DIN 1748.
Literature:
Contacts:
www.rensonuk.net
info@rensonuk.net
T: +44 (0)1622 754123
F: +44 (0)1622 689478
top ^
Aluminium floor grille, bars spanning long axis, light duty, with optional frames.Suitable for use over recessed convector heater or for ventilation. Physical free area: 63 %.Not suitable for foot traffic.Grille: Gravity lay. 20 x 3 mm bars at 13 mm centres, spanning long axis. Length (maximum): 1.6 m. Bars have 20º flared ends for deflection of airflow.Choice of frame. Gravity lay. Length (maximum): 3.5 m. Frame lengths can be butted. Multiple grille panels can be accommodated within frame.Choice of finish.Made to measure.Material:Aluminium alloy: AlMgSi 0.5 to DIN 1748.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=12234&f=COL434023.pdf&pg=Aluminium floor grille, bars spanning long axis, light duty, with optional frames.- Suitable for use over recessed convector heater or for ventilation. Physical free area: 63 %.
- Not suitable for foot traffic.
- Grille: Gravity lay. 20 x 3 mm bars at 13 mm centres, spanning long axis. Length (maximum): 1.6 m. Bars have 20º flared ends for deflection of airflow.
- Choice of frame. Gravity lay. Length (maximum): 3.5 m. Frame lengths can be butted. Multiple grille panels can be accommodated within frame.
More about Aluminium Linear Bar Grille 393:
As standard
- Further information.
| FLOOR GRILLE:
| | | • | Manufacturer:
| Renson Fabrications Ltd. | | | | - | Web: | www.rensonuk.net. | | | | - | Tel: | +44 (0)1622 754123. | | | | - | Product reference:
| Aluminium Linear Bar Grille 393.
| | | • | Dimensions:
|
[Single panel, to outer edge of frame (l x w), ??? x ??? mm].
[Single panel, rebate (l x w), ??? x ??? mm].
[Multiple panel within single frame, as drawing ???].
| | | • | Type:
|
[1, with flangeless angle frame].
- Requires supporting angle or edge rebate 25 x 24 (w x h). Can sit flush with finished floor.
[2, with flanged Z frame].
- Flange supports grille. Flange laps edge of floor by 10 mm (maximum) and projects 1.5 mm above finished floor.
[3, frameless].
- Requires suitable frame or rebate by others. | | | • | Finish (aluminium components):
|
[Aluminium, anodized, natural].
- 20 µ. Type E6/ C34 to DIN 17611.
[Polyester powder coating, RAL colour ???, sheen ??? %].
- 60–70 µ.
[Polyester powder coating, Syntha Pulvin colour ???, sheen ??? %].
- 60–70 µ. |
|
Guidance
for Aluminium Linear Bar Grille 393
from Renson Fabrications Ltd
More about Aluminium Linear Bar Grille 393:
As standard
- Further information.
Material:
Aluminium alloy: AlMgSi 0.5 to DIN 1748.
Literature:
Contacts:
www.rensonuk.net
info@rensonuk.net
T: +44 (0)1622 754123
F: +44 (0)1622 689478
top ^
| Components for site assembly of aluminium floor grille with frame.Suitable for use over recessed convector heater or for ventilation. Not suitable for foot traffic. Physical free area: 59 %.Grille: Gravity lay. 6.6 mm bars at 16.1 mm centres, spanning long axis. Bars have U-section profile to engage preformed clip section. Panel width (maximum): 209 mm.Frame section with corner cleats.Choice of finish.Components are supplied uncut and may be subject to minimum quantities.Material:Aluminium alloy: AlMgSi 0.5 to DIN 1748.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=12234&f=COL434023.pdf&pg= Components for site assembly of aluminium floor grille with frame. - Suitable for use over recessed convector heater or for ventilation. Not suitable for foot traffic. Physical free area: 59 %.
- Grille: Gravity lay. 6.6 mm bars at 16.1 mm centres, spanning long axis. Bars have U-section profile to engage preformed clip section. Panel width (maximum): 209 mm.
- Frame section with corner cleats.
- Components are supplied uncut and may be subject to minimum quantities.
More about Aluminium Linear Bar Grille 394:
As standard
- Further information.
| FLOOR GRILLE :
| | | • | Manufacturer:
| Renson Fabrications Ltd. | | | | - | Web: | www.rensonuk.net. | | | | - | Tel: | +44 (0)1622 754123. | | | | - | Product reference:
| Aluminium Linear Bar Grille 394.
| | | • | Dimensions:
|
[Single panel, to outer edge of frame (l x w), ??? x ??? mm].
[Single panel, rebate (l x w), ??? x ??? mm].
[Multiple panel within single frame, as drawing ???].
| | | • | Finish (aluminium components):
|
[Aluminium, anodized, natural].
- 20 µ. Type E6/ C34 to DIN 17611.
[Polyester powder coating, RAL colour ???, sheen ??? %].
- 60–70 µ.
[Polyester powder coating, Syntha Pulvin colour ???, sheen ??? %].
- 60–70 µ. |
|
Guidance
for Aluminium Linear Bar Grille 394
from Renson Fabrications Ltd
More about Aluminium Linear Bar Grille 394:
As standard
- Further information.
Material:
Aluminium alloy: AlMgSi 0.5 to DIN 1748.
Literature:
Contacts:
www.rensonuk.net
info@rensonuk.net
T: +44 (0)1622 754123
F: +44 (0)1622 689478
