A-Z Manufacturers (Pliteq) |  CAWS Index (K30 160)
Pliteq

Pliteq

www.pliteq.com

jbligh@pliteq.com

T: +44 (0)7591205089

F: +44 (0)1223 257800

Compass House, Vision Park, Chivers Way, Histon, Cambridgeshire. CB24 9AD

This NBS Plus page covers flanking isolation system and acoustic isolation clip

relating to clause 160 PLASTERBOARD LAMINATED PARTITIONS

in K30 Panel partitions.

For more NBS Plus information from this company, see the Pliteq overview page which includes a clause list and a product list.


Products from Pliteq

Pliteq UK offers a design and specification service: consultation early in the design process is recommended.

Select to expand
Flanking isolation systems (1)
Select to expand
Sound isolation clips/ brackets (3)
 

View larger image of GenieMat-FIS from PliteqGenieMat-FIS

The GenieMat FIS is a flanking isolation system that consists of a fastener isolation and a resilient isolation pad that work together to reduce flanking sound transmission from the building structure through a partition wall assembly. Both components are primarily made from 94% recycled rubber. The system acts like permanently resilient gaskets used to reduce sound and vibration transfer through the building structures.It can be used for wood and steel framing, or for concrete block or pour. It is formulated with high damping acrylic polymers, making it a green product. The pad is manufactured to carefully controlled density standards for long-term service. It is impervious to water, most chemicals and temperature change, and will not rot or support mould. The product can be installed with mechanical fasteners, polyurethane-based construction adhesives or a variety of thin-sets and mortars. GenieMat FIS anchor washers are available.Features and benefits:Raised pedestal design for superior cushioning effect.Significantly reduces flanking sound transmission.Mould-, bacteria-, fungi-, and water-resistant.Can be used for a wide range of loadings.Continuous resilient support of partitions.GenieMat washer dimensions:Outer diameter: 37 mm.Inner diameter: 6 mm.Overall thickness: 13 mm.

The GenieMat FIS is a flanking isolation system that consists of a fastener isolation and a resilient isolation pad that work together to reduce flanking sound transmission from the building structure through a partition wall assembly. Both components are primarily made from 94% recycled rubber. The system acts like permanently resilient gaskets used to reduce sound and vibration transfer through the building structures.

It can be used for wood and steel framing, or for concrete block or pour. It is formulated with high damping acrylic polymers, making it a green product. The pad is manufactured to carefully controlled density standards for long-term service. It is impervious to water, most chemicals and temperature change, and will not rot or support mould. The product can be installed with mechanical fasteners, polyurethane-based construction adhesives or a variety of thin-sets and mortars. GenieMat FIS anchor washers are available.

Features and benefits:

  • Raised pedestal design for superior cushioning effect.
  • Significantly reduces flanking sound transmission.
  • Mould-, bacteria-, fungi-, and water-resistant.
  • Can be used for a wide range of loadings.
  • Continuous resilient support of partitions.

More about GenieMat-FIS:
As standard - Further information.

PendingFLANKING ISOLATION SYSTEM:
 Manufacturer:
Pliteq.
  -Web:www.pliteq.com.
  -Tel:+44 (0)7591205089.
  -Product reference:
GenieMat-FIS.
 Dimensions:
[ ______ ] - 83 and 140 mm widths, 5 and 10 mm thicknesses as standard. Custom widths available; consult manufacturer and insert requirements.
 Accessories:
[Not required].
[GenieMat-FIS anchor washers].


top ^

Guidance

for GenieMat-FIS

from Pliteq

More about GenieMat-FIS: As standard - Further information.

As standard

GenieMat washer dimensions:

  • Outer diameter: 37 mm.
  • Inner diameter: 6 mm.
  • Overall thickness: 13 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Pliteq from ribaproductselector.com.

Contacts:

www.pliteq.com

jbligh@pliteq.com

T: +44 (0)7591205089

F: +44 (0)1223 257800

top ^

 

View larger image of GenieClip-LB2 from PliteqGenieClip-LB2

A uni-body moulded rubber and steel part with extended bracket, used when superior sound control is required in multi-family housing, high-rises or commercial buildings. The resilient sound isolation clip with extended steel bracket can be used as a standalone system or in conjunction with a GenieClip wall or ceiling system. It extends or reduces the profile space between the gypsum board layer and floor joists or wall studs, and provides support at the wall termination of furring channels.Features and benefits:Significantly improves low and high frequency sound control performance.Substantially reduces impact noise in floor-ceiling assemblies.Allows for thinner (and even no) resilient mat used in certain floor-ceiling assemblies.Dimensions (l x w x h):64 x 41 x 124 mm.Minimum tensile strength (ASTM D412, Die C):11.2 MPa.Elongation at break (ASTM D573):454% minimum.Type A Hardness (ASTM D2240):37 durometer.Dynamic stiffness (ASTM D5992, D4473, D4065):11.3 N/mm.Laboratory sound transmission class:Specified wall or floor ceiling assembly must be tested in a UKAS accredited laboratory and comply with BS EN ISO standards.Field sound transmission class:Specified wall or floor-ceiling assembly must meet requirement as stated by building standards and/ or acoustic consultant.Temperature stability:-40 to +115°C.Performance:Consult manufacturer's literature for details.

A uni-body moulded rubber and steel part with extended bracket, used when superior sound control is required in multi-family housing, high-rises or commercial buildings. The resilient sound isolation clip with extended steel bracket can be used as a standalone system or in conjunction with a GenieClip wall or ceiling system. It extends or reduces the profile space between the gypsum board layer and floor joists or wall studs, and provides support at the wall termination of furring channels.

Features and benefits:

  • Significantly improves low and high frequency sound control performance.
  • Substantially reduces impact noise in floor-ceiling assemblies.
  • Allows for thinner (and even no) resilient mat used in certain floor-ceiling assemblies.

More about GenieClip-LB2:
As standard - Options - Further information.

PendingACOUSTIC ISOLATION CLIP:
 Manufacturer:
Pliteq.
  -Web:www.pliteq.com.
  -Tel:+44 (0)7591205089.
  -Product reference:
GenieClip-LB2.


top ^

Guidance

for GenieClip-LB2

from Pliteq

More about GenieClip-LB2: As standard - Options - Further information.

As standard

Dimensions (l x w x h):

64 x 41 x 124 mm.

Minimum tensile strength (ASTM D412, Die C):

11.2 MPa.

Elongation at break (ASTM D573):

454% minimum.

Type A Hardness (ASTM D2240):

37 durometer.

Dynamic stiffness (ASTM D5992, D4473, D4065):

11.3 N/mm.

Laboratory sound transmission class:

Specified wall or floor ceiling assembly must be tested in a UKAS accredited laboratory and comply with BS EN ISO standards.

Field sound transmission class:

Specified wall or floor-ceiling assembly must meet requirement as stated by building standards and/ or acoustic consultant.

Temperature stability:

-40 to +115°C.

Options

Performance:

Consult manufacturer's literature for details.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Pliteq from ribaproductselector.com.

Contacts:

www.pliteq.com

jbligh@pliteq.com

T: +44 (0)7591205089

F: +44 (0)1223 257800

top ^

 

View larger image of GenieClip-LB3 from PliteqGenieClip-LB3

A uni-body moulded rubber and steel part with extended bracket used when superior sound control is required in multi-family housing, high-rises, or commercial buildings. The resilient sound isolation clip with extended steel bracket can be used as a standalone system or in conjunction with a GenieClip wall or ceiling system. It extends or reduces the profile space between the gypsum board layer and floor joists or wall studs, and provides support at the wall termination of furring channels.Features and benefits:Significantly improves low and high frequency sound control performance.Substantially reduces impact noise in floor-ceiling assemblies.Allows for thinner (and even no) resilient mat used in certain floor-ceiling assemblies.Dimensions (l x w x h):102 x 64 x 67 mm.Minimum tensile strength (ASTM D412, Die C):11.2 MPa.Elongation at break (ASTM D573):454% minimum.Type A Hardness (ASTM D2240):37 durometer.Dynamic stiffness (ASTM D5992, D4473, D4065):11.3 N/mm.Laboratory sound transmission class:Specified wall or floor ceiling assembly must be tested in a UKAS accredited laboratory and comply with BS EN ISO standards.Field sound transmission class:Specified wall or floor-ceiling assembly must meet requirement as stated by building standards and/ or acoustic consultant.Temperature stability:-40 to +115°C.Performance:Consult manufacturer's literature for details.

A uni-body moulded rubber and steel part with extended bracket used when superior sound control is required in multi-family housing, high-rises, or commercial buildings. The resilient sound isolation clip with extended steel bracket can be used as a standalone system or in conjunction with a GenieClip wall or ceiling system. It extends or reduces the profile space between the gypsum board layer and floor joists or wall studs, and provides support at the wall termination of furring channels.

Features and benefits:

  • Significantly improves low and high frequency sound control performance.
  • Substantially reduces impact noise in floor-ceiling assemblies.
  • Allows for thinner (and even no) resilient mat used in certain floor-ceiling assemblies.

More about GenieClip-LB3:
As standard - Options - Further information.

PendingACOUSTIC ISOLATION CLIP:
 Manufacturer:
Pliteq.
  -Web:www.pliteq.com.
  -Tel:+44 (0)7591205089.
  -Product reference:
GenieClip-LB3.


top ^

Guidance

for GenieClip-LB3

from Pliteq

More about GenieClip-LB3: As standard - Options - Further information.

As standard

Dimensions (l x w x h):

102 x 64 x 67 mm.

Minimum tensile strength (ASTM D412, Die C):

11.2 MPa.

Elongation at break (ASTM D573):

454% minimum.

Type A Hardness (ASTM D2240):

37 durometer.

Dynamic stiffness (ASTM D5992, D4473, D4065):

11.3 N/mm.

Laboratory sound transmission class:

Specified wall or floor ceiling assembly must be tested in a UKAS accredited laboratory and comply with BS EN ISO standards.

Field sound transmission class:

Specified wall or floor-ceiling assembly must meet requirement as stated by building standards and/ or acoustic consultant.

Temperature stability:

-40 to +115°C.

Options

Performance:

Consult manufacturer's literature for details.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Pliteq from ribaproductselector.com.

Contacts:

www.pliteq.com

jbligh@pliteq.com

T: +44 (0)7591205089

F: +44 (0)1223 257800

top ^

 

View larger image of GenieClip-RST from PliteqGenieClip-RST

GenieClip RST is engineered for superior acoustic performance in reducing the transmission of airborne and impact sound through wall and floor/ ceiling assemblies. It is a uni-body moulded rubber and galvanized steel part used to attach plasterboard to either wall or floor/ ceiling assemblies. Made from recycled components and engineered to allow reduction in assembly weight.Features and benefits:Significantly improves low frequency sound control performance.Substantially improves impact noise and helps stop sound through walls and floor/ ceiling construction.Allows for thinner (and even no) resilient mat used in certain floor/ ceiling assemblies.Substantially reduces costs and associated problems in wood truss floor/ ceiling construction and still meets standards for fire and sound control – making the product suitable for residential apartment construction.No short-circuiting, which often happens with resilient channels.Product can be immediately installed.Type A Hardness (ASTM D2240):37 durometer.Dynamic stiffness (ASTM D5992, D4473, D4065):11.3 N/mm.Performance:Consult manufacturer's literature for details.

GenieClip RST is engineered for superior acoustic performance in reducing the transmission of airborne and impact sound through wall and floor/ ceiling assemblies. It is a uni-body moulded rubber and galvanized steel part used to attach plasterboard to either wall or floor/ ceiling assemblies. Made from recycled components and engineered to allow reduction in assembly weight.

Features and benefits:

  • Significantly improves low frequency sound control performance.
  • Substantially improves impact noise and helps stop sound through walls and floor/ ceiling construction.
  • Allows for thinner (and even no) resilient mat used in certain floor/ ceiling assemblies.
  • Substantially reduces costs and associated problems in wood truss floor/ ceiling construction and still meets standards for fire and sound control – making the product suitable for residential apartment construction.
  • No short-circuiting, which often happens with resilient channels.
  • Product can be immediately installed.

More about GenieClip-RST:
As standard - Options - Further information.

PendingACOUSTIC ISOLATION CLIP:
 Manufacturer:
Pliteq.
  -Web:www.pliteq.com.
  -Tel:+44 (0)7591205089.
  -Product reference:
GenieClip-RST.


top ^

Guidance

for GenieClip-RST

from Pliteq

More about GenieClip-RST: As standard - Options - Further information.

As standard

Type A Hardness (ASTM D2240):

37 durometer.

Dynamic stiffness (ASTM D5992, D4473, D4065):

11.3 N/mm.

Options

Performance:

Consult manufacturer's literature for details.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Pliteq from ribaproductselector.com.

Contacts:

www.pliteq.com

jbligh@pliteq.com

T: +44 (0)7591205089

F: +44 (0)1223 257800

top ^

 
Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017