A-Z Manufacturers (Hörmann (UK) Ltd) |  CAWS Index (L20 615)
Hörmann (UK) Ltd

Hörmann (UK) Ltd

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

Gee Road, Coalville, Leicestershire. LE67 4JW

RIBA Product Selector
NBS National BIM Library
RIBA CPD

This NBS Plus page covers sectional overhead doors and sectional garage door

relating to clause 615 SECTIONAL OVERHEAD DOORS

in L20 Doors/ shutters/ hatches.

For more NBS Plus information from this company, see the Hörmann (UK) Ltd overview page which includes a clause list and a product list.


Products from Hörmann (UK) Ltd

Hörmann offers a design and specification service; consultation early in the design process is recommended.

Select to expand
Sectional Overhead Doors (3)
Select to expand
Garage doors (1)
 

ALR 40

An aluminium, double glazed sectional overhead door, 16 or 26 mm thick insulated infill panels can be incorporated instead of the glazed panels if required.Door type ALR 40B is available with wider glazing panels and 91 mm rail profiles.Track system:Galvanized steel track system with side frames shaped as hand guards.Door panels:Aluminium framed glazing units. Finger trap protection to panel joint inside and out.Finish as delivered:Anodized to DIN 17611.Colour:Natural – E6/ EV1.Wind pressure:To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.Fire performance:To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.Manual opening force:<260 N.Performance (Power operated only):Closing force:<400 N.Ironmongery:Locking options – manual doors:Standard shoot bolt operation side or both sides.Foot latch.Internal/ external lock prepared for profile cylinder.Locking options – electric doors:Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.Dacromet finish for wet and marine environments.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL415865.pdf&pg=

An aluminium, double glazed sectional overhead door, 16 or 26 mm thick insulated infill panels can be incorporated instead of the glazed panels if required.

Door type ALR 40B is available with wider glazing panels and 91 mm rail profiles.

More about ALR 40:
As standard - Options - Further information.

PendingSECTIONAL OVERHEAD DOORS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
ALR 40 Aluminium sectional glazed door.
 Arrangement:
[High lift]. - Ref: H.
[High lift with inclination]. - Ref: HD.
[High lift with double radius (2 x 45°)]. - Ref: HS.
 Size:
[ ______ ]
  -Width:
[1000 mm].
[2000 mm].
[3000 mm].
  -Height:
[1750 mm].
[2000 mm].
[2500 mm].
 Operation:
[Fast action operator].
[Geared chain hoist with/ without chain tensioner].
[Hoist with chain].


top ^

Guidance

for ALR 40

from Hörmann (UK) Ltd

More about ALR 40: As standard - Options - Further information.

As standard

Track system:

Galvanized steel track system with side frames shaped as hand guards.

Door panels:

Aluminium framed glazing units. Finger trap protection to panel joint inside and out.

Finish as delivered:

Anodized to DIN 17611.

Colour:

Natural – E6/ EV1.

Wind pressure:

To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.

Fire performance:

To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.

Manual opening force:

<260 N.

Performance (Power operated only):

Closing force:

<400 N.

Options

Ironmongery:

Locking options – manual doors:

  • Standard shoot bolt operation side or both sides.
  • Foot latch.
  • Internal/ external lock prepared for profile cylinder.

Locking options – electric doors:

  • Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

  • Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.
  • Dacromet finish for wet and marine environments.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

APU 40

An insulated sectional overhead door consisting of a double skinned galvanized steel insulated bottom panel and double glazed panels with aluminium glazing sections.Sectional door type APU 40B is available with wider glazing panels.Track system:Galvanized steel track system with side frames shaped as hand guards.Door panels:Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.Finish as delivered:Polyester stucco embossed coating on both sides.Internal colour:Off white – RAL 9002.Wind pressure:To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.Fire performance:To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.Manual opening force:<260 N.Performance (Power operated only):Closing force:<400 N.Ironmongery:Locking options – manual doors:Standard shoot bolt operation side or both sides.Foot latch.Internal/ external lock prepared for profile cylinder.Locking options – electric doors:Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.Dacromet finish for wet and marine environments.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL239332.pdf&pg=

An insulated sectional overhead door consisting of a double skinned galvanized steel insulated bottom panel and double glazed panels with aluminium glazing sections.

Sectional door type APU 40B is available with wider glazing panels.

More about APU 40:
As standard - Options - Further information.

PendingSECTIONAL OVERHEAD DOORS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
APU 40 Insulated/ Glazed combination sectional door.
 Arrangement:
[High lift]. - Ref: H.
[High lift with inclination]. - Ref: HD.
[High lift with double radius (2 x 45°)]. - Ref: HS.
 Size:
[ ______ ]
  -Width:
[1000 mm].
[2000 mm].
[3000 mm].
  -Height:
[1750 mm].
[2000 mm].
[2500 mm].
 Door panels:
[ ______ ]
  -External colour:
[Anthracite grey, RAL 7016].
[Azure blue, RAL 5009].
[Flame red, RAL 3000].
 Glazing panels:
[??? rows of vision panels].
[Full width 52 mm aluminium glazing frame].
[Full width 91 mm aluminium glazing frame].
 Operation:
[Fast action operator].
[Geared chain hoist with/ without chain tensioner].
[Hoist with chain].


top ^

Guidance

for APU 40

from Hörmann (UK) Ltd

More about APU 40: As standard - Options - Further information.

As standard

Track system:

Galvanized steel track system with side frames shaped as hand guards.

Door panels:

Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.

Finish as delivered:

Polyester stucco embossed coating on both sides.

Internal colour:

Off white – RAL 9002.

Wind pressure:

To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.

Fire performance:

To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.

Manual opening force:

<260 N.

Performance (Power operated only):

Closing force:

<400 N.

Options

Ironmongery:

Locking options – manual doors:

  • Standard shoot bolt operation side or both sides.
  • Foot latch.
  • Internal/ external lock prepared for profile cylinder.

Locking options – electric doors:

  • Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

  • Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.
  • Dacromet finish for wet and marine environments.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

SPU 40

An insulated sectional overhead door consisting of a combination of 500 mm and 375 mm deep or 750 mm and 625 mm deep double-skinned galvanized steel, horizontally ribbed door panels. The steel sections are horizontally profiled at 125 mm centres to match STE 40 and TPU 40 steel doors.Track system:Galvanized steel track system with side frames shaped as hand guards:Door panels:Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.Finish as delivered:Polyester stucco embossed coating on both sides.Internal colour:Off white – RAL 9002.Wind pressure:To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.Fire performance:To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.Manual opening force:<260 N.Performance (Power operated only):Closing force:<400 N.Glazing options:3 mm Clear synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.3 mm Crystal structured synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.Clear synthetic double panes – 11, 16, 29, 31 or 33 mm: For compound window with zinc die-cast frame and for aluminium glazing frame.Crystal structured synthetic double panes – 16 mm or 29 mm: For aluminium glazing frame.6 mm Clear polycarbonate pane, burglar proof and impact resistant: For aluminium glazing frame.16 mm Clear polycarbonate double pane, burglar proof and impact resistant: For compound window with zinc die-cast frame and for aluminium glazing frame.16 mm Double moulded unit: For aluminium glazing frame.Expanded mesh, galvanized steel, powder coated: For aluminium glazing frame.Perforated sheet – smooth stainless steel: For aluminium glazing frame.Aluman sheet infill 1.5 mm, stucco embossed: For aluminium glazing frame.PU sandwich infill – aluminium sheet cladding 16 mm, anodized two sides, smooth finish: For aluminium glazing frame.PU sandwich infill Aluman sheet clad, both sides stucco embossed 16 mm or 26 mm: For aluminium glazing frame.Ironmongery:Locking options – manual doors:Standard shoot bolt operation side or both sides.Foot latch.Internal/ external lock prepared for profile cylinder.Locking options – electric doors:Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.Dacromet finish for wet and marine environments.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL415865.pdf&pg=

An insulated sectional overhead door consisting of a combination of 500 mm and 375 mm deep or 750 mm and 625 mm deep double-skinned galvanized steel, horizontally ribbed door panels. The steel sections are horizontally profiled at 125 mm centres to match STE 40 and TPU 40 steel doors.

More about SPU 40:
As standard - Options - Further information.

PendingSECTIONAL OVERHEAD DOORS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
SPU 40 Double skinned insulated sectional door.
 Arrangement:
[High lift]. - Ref: H.
[High lift with inclination]. - Ref: HD.
[High lift with double radius (2 x 45°)]. - Ref: HS.
 Size:
[ ______ ]
  -Width:
[1000 mm].
[2000 mm].
[3000 mm].
  -Height:
[1750 mm].
[2000 mm].
[2500 mm].
 Door panels:
[ ______ ]
  -External colour:
[Anthracite grey, RAL 7016].
[Azure blue, RAL 5009].
[Flame red, RAL 3000].
 Glazing panels:
[??? rows of vision panels].
[Type A: Vision panels (635 x 245 mm) with synthetic or zinc die cast frame].
[Type C: Circular vision panels (244 mm diameter) with synthetic frame].
 Operation:
[Fast action operator].
[Single phase power].
[Three phase power].


top ^

Guidance

for SPU 40

from Hörmann (UK) Ltd

More about SPU 40: As standard - Options - Further information.

As standard

Track system:

Galvanized steel track system with side frames shaped as hand guards:

Door panels:

Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.

Finish as delivered:

Polyester stucco embossed coating on both sides.

Internal colour:

Off white – RAL 9002.

Wind pressure:

To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.

Fire performance:

To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.

Manual opening force:

<260 N.

Performance (Power operated only):

Closing force:

<400 N.

Options

Glazing options:

  • 3 mm Clear synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.
  • 3 mm Crystal structured synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.
  • Clear synthetic double panes – 11, 16, 29, 31 or 33 mm: For compound window with zinc die-cast frame and for aluminium glazing frame.
  • Crystal structured synthetic double panes – 16 mm or 29 mm: For aluminium glazing frame.
  • 6 mm Clear polycarbonate pane, burglar proof and impact resistant: For aluminium glazing frame.
  • 16 mm Clear polycarbonate double pane, burglar proof and impact resistant: For compound window with zinc die-cast frame and for aluminium glazing frame.
  • 16 mm Double moulded unit: For aluminium glazing frame.
  • Expanded mesh, galvanized steel, powder coated: For aluminium glazing frame.
  • Perforated sheet – smooth stainless steel: For aluminium glazing frame.
  • Aluman sheet infill 1.5 mm, stucco embossed: For aluminium glazing frame.
  • PU sandwich infill – aluminium sheet cladding 16 mm, anodized two sides, smooth finish: For aluminium glazing frame.
  • PU sandwich infill Aluman sheet clad, both sides stucco embossed 16 mm or 26 mm: For aluminium glazing frame.

Ironmongery:

Locking options – manual doors:

  • Standard shoot bolt operation side or both sides.
  • Foot latch.
  • Internal/ external lock prepared for profile cylinder.

Locking options – electric doors:

  • Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

  • Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.
  • Dacromet finish for wet and marine environments.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

View larger image of Sectional Garage Doors from Hörmann (UK) LtdSectional Garage Door - Continental Range

Track-guided sectional garage door that fits anywhere and saves space.Benefits:Space-saving: Sectional doors open vertically upwards and are suspended under the ceiling to save space. This constructional principle means you can make full use of the space inside and in front of the garage for parking.Variable when fitting: The shape of the garage door opening is not of prime importance. Whether square, angled, with segmental or full centred arch – a Hörmann sectional door always fits.Wider passage: Sectional doors with a passage width extended by up to 140 mm can make it much easier to park modern, larger vehicles and SUVs. Sealed all round: Flexible and weather-resistant seals on all four sides of Hörmann’s sectional doors keep out the wind and rain.Additional intermediate seals: Double-skinned doors have additional high-grade intermediate seals between the individual door sections.Bottom seal: With its large-sized profile lip, the bottom seal can easily accommodate slight irregularities in the floor.Track Versions:-Tension Spring (Z) tracks with tension technology (not for LPU sectional doors) - single doors with Z track tension springs giving low headroom as standard.Normal (N) tracks with torsion spring technology - Double doors with N track torsion springs.Low-headroom (L) tracks with torsion spring technology.For more track information on these and further track versions consult manufacturer.Standards:Tested and certified by TÜV in accordance with TTZ directive “Break-in resistance for garage doors”. Doors with wicket doors and doors with glazing are an exception.Performance characteristics according to EN 13241-1. Consult manufacturer's literature for thermal and acoustic insulation values.Size (w x h): - Standard:2250 x 1875, 2000 and 2125 mm.2375 x 1875, 2000, 2125 and 2250 mm.2500 x 1875, 2000, 2125, 2250, 2375 and 2500 mm. 2500 x 2750 mm only with track application N.2625 x 2125 mm.2750 x 2000, 2125, 2250, 2375 and 2500 mm. 2750 x 2750 only with track application N.3000 x 2000, 2125, 2250, 2375 and 2500 mm. - Modernisation sizes:2190 x 1955 and 2080 mm.2315 x 1955, 2080 and 2205 mm.2440 x 1955, 2080 and 2205 mm.2940 x 2080 mm.2500 x 2750 mm.2750 x 2750 mm.3000 x 3000 mm.3250 x 2000, 2125 and 2250 mm.3500 x 2000, 2125 and 2250 mm.3750 x 2000, 2125 and 2250 mm.4000 x 2000, 2125 and 2250 mm.4250 x 2000, 2125 and 2250 mm.4500 x 2000, 2125 and 2250 mm.4750 x 2000, 2125 and 2250 mm.5000 x 2000, 2125 and 2250 mm.5500 x 2000, 2125 and 2250 mm.6000 x 2000, 2125 and 2250 mm.6500 x 2000, 2125 and 2250 mm.Finish: - Decograin:UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber. - Micrograin:With its delicately lined profile, the new Micrograin surface complements the elegance of modern architecture. - Silkgrain:Silky-smooth elegant surface finish. - Woodgrain:Robust woodgrain structured surface with authentic sawn timber look. - Solid timber:Nordic pine or hemlock, boarded, panelled or individual design. - Colour:Single and double skin steel door leaves are galvanized and available in Traffic white as standard. Double-skinned garage doors additionally available in 15 factory colours, as well as about 200 colours based on RAL. Please note all colours are made to order only. Glazing:Can be matched to windows and front door designs.Door design style:Steel and timber variations available in a number of special styles and embellishments. Specify left, centre or right hand where appropriate.Operation:- Manual:Black plastic handle.Brushed stainless steel handle.Cast aluminium, brass finish handle.Cast aluminium, bronze finish handle.Cast aluminium, silver finish handle.Cast aluminium, white handle.Polished stainless steel handle.- Electrical: - ProMatic:The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day. Opening speed: 140 mm/s.ProMatic.ProMatic Akku (rechargeable battery powered).ProMatic P. - SupraMatic:The high-quality operator with an array of additional functions for a maximum of 50 door cycles (open/ close) per day. Opening speed: 220 mm/s.SupraMatic E.SupraMatic H.SupraMatic HD.SupraMatic P. - Operator technology generally:868.3 MHz radio frequency with a stable range.Every operator comes with a four button hand transmitter and a micro two button hand transmitter.Integral receiver.Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.On encountering an obstruction, a reliable automatic cut-out stops the door immediately.'Soft' start/ stop saves wear and tear on both the door and operator.Maintenance-free patented toothed belt.Internal emergency release.Easy to install. Everything is precisely prepared.Controls: - Mobile:HS 1 - Hand transmitter, one function.HS 4 - Hand transmitter, four functions.HSD 2-A - Transmission block, aluminium, two functions.HSD 2-C - Transmission block, glossy chrome, two functions.HSE 2 - Micro hand transmitter, two functions.HSM 4 - Mini hand transmitter, four functions.HSP 4 - Hand transmitter, lock-out button, four functions.HSZ 1 - Hand transmitter, car, one function.HSZ 2 - Hand transmitter, car, two function. - Stationary:CTR 1b/3b - Digital coder one/ three functions.ESA - Key switch, surface mount.ESU - Key switch, recess mount.STAP - Key switch, surface mount.STUP - Key switch, recess mount.FCT 10b - Code modulator, ten functions.FCT 3b - Code modulator, three functions.FIT 2 - Internal radio-controlled push-button unit.FL 100 - Fingerscan, 100 prints.FL 100 - Radio fingerscan, 100 prints.FL 12 - Fingerscan, 12 prints.FL 12 - Radio fingerscan, 12 prints.IT 1b - Illuminated button.IT 3b - SupraMatic illuminated button.TTR 100 - Transponder, 100 key.TTR 1000 - Transponder, 1000 key.

Track-guided sectional garage door that fits anywhere and saves space.

Benefits:

  • Space-saving: Sectional doors open vertically upwards and are suspended under the ceiling to save space. This constructional principle means you can make full use of the space inside and in front of the garage for parking.
  • Variable when fitting: The shape of the garage door opening is not of prime importance. Whether square, angled, with segmental or full centred arch – a Hörmann sectional door always fits.
  • Wider passage: Sectional doors with a passage width extended by up to 140 mm can make it much easier to park modern, larger vehicles and SUVs.
  • Sealed all round: Flexible and weather-resistant seals on all four sides of Hörmann’s sectional doors keep out the wind and rain.
  • Additional intermediate seals: Double-skinned doors have additional high-grade intermediate seals between the individual door sections.
  • Bottom seal: With its large-sized profile lip, the bottom seal can easily accommodate slight irregularities in the floor.

Track Versions:-

  • Tension Spring (Z) tracks with tension technology (not for LPU sectional doors) - single doors with Z track tension springs giving low headroom as standard.
  • Normal (N) tracks with torsion spring technology - Double doors with N track torsion springs.
  • Low-headroom (L) tracks with torsion spring technology.

For more track information on these and further track versions consult manufacturer.

Standards:

  • Tested and certified by TÜV in accordance with TTZ directive “Break-in resistance for garage doors”. Doors with wicket doors and doors with glazing are an exception.
  • Performance characteristics according to EN 13241-1. Consult manufacturer's literature for thermal and acoustic insulation values.

More about Sectional Garage Door - Continental Range:
- Options - Further information.

PendingSECTIONAL GARAGE DOOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Sectional Garage Door - Continental Range.
 Type:
[Individual design LTH 40 Hemlock]. - Solid timber.
[Individual design LTH 40 Nordic pine]. - Solid timber.
[L rib LPU 40]. - Double skin (door leaf 42 mm thick); Silkgrain, Micrograin and Decograin Titan Metallic finish.
 Size:
[ ______ ]
 Finish:
[Decograin]. - M and L rib and S panel LPU 40 doors only.
[Micrograin]. - M and L rib LPU 40 door only.
[Silkgrain]. - M and L rib LPU 40 doors only.
 Colour:
[RAL 1015, Light ivory].
[RAL 3003, Ruby red].
[RAL 5003, Sapphire blue].
 Design style:
[ ______ ]
 Glazing:
[Not required].
[Required]. - Creates a thermal break between the frame and the brickwork, improving the insulation by 15%.
 Frame cladding:
[Not required].
[Required, colour as door].
 Thermoframe connection:
[Not required].
[Required]. - Creates a thermal break between the frame and the brickwork, improving the insulation by 15%.
 Track:
[H]. - High-lift tracks.
[L]. - Torsion spring low-headroom.
[N]. - Torsion spring.
 Operation:
[ ______ ]
 Controls:
[ ______ ]
 Accessories:
[None].
[Double-leaf door fittings].
[LED illumination].


top ^

Guidance

for Sectional Garage Door - Continental Range

from Hörmann (UK) Ltd

More about Sectional Garage Door - Continental Range: - Options - Further information.

Options

Size (w x h):

- Standard:

  • 2250 x 1875, 2000 and 2125 mm.
  • 2375 x 1875, 2000, 2125 and 2250 mm.
  • 2500 x 1875, 2000, 2125, 2250, 2375 and 2500 mm. 2500 x 2750 mm only with track application N.
  • 2625 x 2125 mm.
  • 2750 x 2000, 2125, 2250, 2375 and 2500 mm. 2750 x 2750 only with track application N.
  • 3000 x 2000, 2125, 2250, 2375 and 2500 mm.

- Modernisation sizes:

  • 2190 x 1955 and 2080 mm.
  • 2315 x 1955, 2080 and 2205 mm.
  • 2440 x 1955, 2080 and 2205 mm.
  • 2940 x 2080 mm.
  • 2500 x 2750 mm.
  • 2750 x 2750 mm.
  • 3000 x 3000 mm.
  • 3250 x 2000, 2125 and 2250 mm.
  • 3500 x 2000, 2125 and 2250 mm.
  • 3750 x 2000, 2125 and 2250 mm.
  • 4000 x 2000, 2125 and 2250 mm.
  • 4250 x 2000, 2125 and 2250 mm.
  • 4500 x 2000, 2125 and 2250 mm.
  • 4750 x 2000, 2125 and 2250 mm.
  • 5000 x 2000, 2125 and 2250 mm.
  • 5500 x 2000, 2125 and 2250 mm.
  • 6000 x 2000, 2125 and 2250 mm.
  • 6500 x 2000, 2125 and 2250 mm.

Finish:

- Decograin:

UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber.

- Micrograin:

With its delicately lined profile, the new Micrograin surface complements the elegance of modern architecture.

- Silkgrain:

Silky-smooth elegant surface finish.

- Woodgrain:

Robust woodgrain structured surface with authentic sawn timber look.

- Solid timber:

Nordic pine or hemlock, boarded, panelled or individual design.

- Colour:

Single and double skin steel door leaves are galvanized and available in Traffic white as standard. Double-skinned garage doors additionally available in 15 factory colours, as well as about 200 colours based on RAL. Please note all colours are made to order only.

Glazing:

Can be matched to windows and front door designs.

Door design style:

Steel and timber variations available in a number of special styles and embellishments. Specify left, centre or right hand where appropriate.

Operation:

- Manual:

  • Black plastic handle.
  • Brushed stainless steel handle.
  • Cast aluminium, brass finish handle.
  • Cast aluminium, bronze finish handle.
  • Cast aluminium, silver finish handle.
  • Cast aluminium, white handle.
  • Polished stainless steel handle.

- Electrical:

- ProMatic:

  • The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day. Opening speed: 140 mm/s.
  • ProMatic.
  • ProMatic Akku (rechargeable battery powered).
  • ProMatic P.

- SupraMatic:

  • The high-quality operator with an array of additional functions for a maximum of 50 door cycles (open/ close) per day. Opening speed: 220 mm/s.
  • SupraMatic E.
  • SupraMatic H.
  • SupraMatic HD.
  • SupraMatic P.

- Operator technology generally:

  • 868.3 MHz radio frequency with a stable range.
  • Every operator comes with a four button hand transmitter and a micro two button hand transmitter.
  • Integral receiver.
  • Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.
  • On encountering an obstruction, a reliable automatic cut-out stops the door immediately.
  • 'Soft' start/ stop saves wear and tear on both the door and operator.
  • Maintenance-free patented toothed belt.
  • Internal emergency release.
  • Easy to install. Everything is precisely prepared.

Controls:

- Mobile:

  • HS 1 - Hand transmitter, one function.
  • HS 4 - Hand transmitter, four functions.
  • HSD 2-A - Transmission block, aluminium, two functions.
  • HSD 2-C - Transmission block, glossy chrome, two functions.
  • HSE 2 - Micro hand transmitter, two functions.
  • HSM 4 - Mini hand transmitter, four functions.
  • HSP 4 - Hand transmitter, lock-out button, four functions.
  • HSZ 1 - Hand transmitter, car, one function.
  • HSZ 2 - Hand transmitter, car, two function.

- Stationary:

  • CTR 1b/3b - Digital coder one/ three functions.
  • ESA - Key switch, surface mount.
  • ESU - Key switch, recess mount.
  • STAP - Key switch, surface mount.
  • STUP - Key switch, recess mount.
  • FCT 10b - Code modulator, ten functions.
  • FCT 3b - Code modulator, three functions.
  • FIT 2 - Internal radio-controlled push-button unit.
  • FL 100 - Fingerscan, 100 prints.
  • FL 100 - Radio fingerscan, 100 prints.
  • FL 12 - Fingerscan, 12 prints.
  • FL 12 - Radio fingerscan, 12 prints.
  • IT 1b - Illuminated button.
  • IT 3b - SupraMatic illuminated button.
  • TTR 100 - Transponder, 100 key.
  • TTR 1000 - Transponder, 1000 key.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 
Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 12 December 2017