A-Z Manufacturers (Hörmann (UK) Ltd) |  CAWS Index (L20 610)
Hörmann (UK) Ltd

Hörmann (UK) Ltd

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

Gee Road, Coalville, Leicestershire. LE67 4JW

RIBA Product Selector
NBS National BIM Library
RIBA CPD

This NBS Plus page covers roller shutters/ curtains, high speed doors, roller garage door, garage door operator and radio switch

relating to clause 610 ROLLER SHUTTERS/ CURTAINS

in L20 Doors/ shutters/ hatches.

For more NBS Plus information from this company, see the Hörmann (UK) Ltd overview page which includes a clause list and a product list.


Products from Hörmann (UK) Ltd

Hörmann offers a design and specification service; consultation early in the design process is recommended.

Select to expand
Rolling Shutters (8)
Select to expand
Roller Garage Doors (1)
Select to expand
Operators and Accessories (3)
 

Decotherm Basic Thermally Insulated Rolling Shutter

A double-skinned thermally insulated rolling shutter.The skin is of electroplated special steel with high-grade coil coating both sides.An additional coat of protective paint with PA particles, also on both sides, helps reduce friction and the noise produced by the shutter action.The sandwich core is of 100% CFC-free PU rigid foam.Dimensions:Width (minimum): 1878 mm.Width (maximum): 4000 mm.Height (maximum): 4000 mm.Performance:Standards:BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.Wind pressure to BS EN 12424:Class 2, doors to achieve higher wind classes are available on request.Fire performance to DIN 4102:Door section element materials are Class B2. Thermal insulation (Individual shutter profile):3.8 W/m²K.Prevention of persons being lifted (Power operated only):Dead-man’s control or torque limit on impulse control.Shutter curtain:Double-skinned thermally insulated:Lath depth: 109 mm.Face material:Electroplated special steel with high-grade coil coating both sides.Core material:100% CFC-free PU rigid foam.Frame/ Guides:Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.Locking options:Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Hood:Required on all shutters and grilles under 2500 mm high.Hood finish:Galvanized or stainless steel.Vision/ Louvre Options:Rows of vision panels: (State number of rows – for rectangular or triangular panels).Transparent polycarbonate window, rectangular shaped.Transparent polycarbonate window, triangular shaped.‘Logistic’ (transparent polycarbonate window rectangular shaped – four either side).Ventilation grille, non-transparent, Anthracite grey, based on RAL 7016 (cross section approx 22 cm² per ventilation grille).

A double-skinned thermally insulated rolling shutter.

The skin is of electroplated special steel with high-grade coil coating both sides.

An additional coat of protective paint with PA particles, also on both sides, helps reduce friction and the noise produced by the shutter action.

The sandwich core is of 100% CFC-free PU rigid foam.

More about Decotherm Basic Thermally Insulated Rolling Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Decotherm Basic Thermally Insulated Rolling Shutter.
 Size:
[1878 x 2500 mm].
[3000 x 3000 mm].
[4000 x 4000 mm].
 Arrangement:
[Vertical rolling shutter, face fixed].
[Vertical rolling shutter. Fixed between walls with additional posts].
 Finish:
[Galvanized steel].
[Galvanized steel, with polyester coil coating in off white - RAL 9002].
[Galvanized steel, with polyester coil coating in white aluminium – RAL 9006].
 Operation:
[Single phase power].
[Three phase power]. - Standard.
 Other requirements:
[ ______ ]


top ^

Guidance

for Decotherm Basic Thermally Insulated Rolling Shutter

from Hörmann (UK) Ltd

More about Decotherm Basic Thermally Insulated Rolling Shutter: As standard - Options - Further information.

As standard

Dimensions:

  • Width (minimum): 1878 mm.
  • Width (maximum): 4000 mm.
  • Height (maximum): 4000 mm.

Performance:

Standards:

BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.

Wind pressure to BS EN 12424:

Class 2, doors to achieve higher wind classes are available on request.

Fire performance to DIN 4102:

Door section element materials are Class B2.

Thermal insulation (Individual shutter profile):

3.8 W/m²K.

Prevention of persons being lifted (Power operated only):

Dead-man’s control or torque limit on impulse control.

Shutter curtain:

Double-skinned thermally insulated:

Lath depth: 109 mm.

Face material:

Electroplated special steel with high-grade coil coating both sides.

Core material:

100% CFC-free PU rigid foam.

Frame/ Guides:

Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.

Options

Locking options:

  • Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

Hood:

Required on all shutters and grilles under 2500 mm high.

Hood finish:

Galvanized or stainless steel.

Vision/ Louvre Options:

  • Rows of vision panels: (State number of rows – for rectangular or triangular panels).
  • Transparent polycarbonate window, rectangular shaped.
  • Transparent polycarbonate window, triangular shaped.
  • ‘Logistic’ (transparent polycarbonate window rectangular shaped – four either side).
  • Ventilation grille, non-transparent, Anthracite grey, based on RAL 7016 (cross section approx 22 cm² per ventilation grille).

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

Decotherm Classic Thermally Insulated Rolling Shutter

Decotherm is a double-skinned thermally insulated rolling shutter.The skin is of electroplated special steel with high-grade coil coating both sides.An additional coat of protective paint with PA particles, also on both sides, helps reduce friction and the noise produced by the shutter action.The sandwich core is of 100% CFC-free PU rigid foam.Dimensions:Width (minimum): 1878 mm.Width (maximum): 8000 mm.Height (maximum): 8000 mm.Performance:Standards:BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.Wind pressure to BS EN 12424:Class 2, doors to achieve higher wind classes are available on request.Fire performance to DIN 4102:Door section element materials are Class B2.Thermal insulation (Individual shutter profile):4.3 W/m²K.Prevention of persons being lifted (Power operated only):Dead-man’s control or torque limit on impulse control.Shutter curtain:Double-skinned thermally insulated:Lath depth: 109 mm.Face material:Electroplated special steel with high-grade coil coating both sides.Core material:100% CFC-free PU rigid foam.Frame/ Guides:Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.Locking options:Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Hood:Required on all shutters and grilles under 2500 mm high.Hood finish:Galvanized or stainless steel.Vision/ Louvre Options:Rows of vision panels: (State number of rows – for rectangular or triangular panels).Transparent polycarbonate window, rectangular shaped.Transparent polycarbonate window, triangular shaped.Rhombus shaped arrangement 1 (approximately 510 mm x 340 mm).Rhombus shaped arrangement 2 (approximately 830 mm x 525 mm).Rhombus shaped arrangement 3 (approximately 1150 mm x 710 mm).Rhombus shaped arrangement 4 (approximately 1470 mm x 900 mm).Rhombus shaped arrangement 5 (approximately 1790 mm x 1080 mm).‘Logistic’ (transparent polycarbonate window rectangular shaped – four either side).Ventilation grille non-transparent, Anthracite grey, based on RAL 7016 (cross section approx 22 cm² per ventilation grille).

Decotherm is a double-skinned thermally insulated rolling shutter.

The skin is of electroplated special steel with high-grade coil coating both sides.

An additional coat of protective paint with PA particles, also on both sides, helps reduce friction and the noise produced by the shutter action.

The sandwich core is of 100% CFC-free PU rigid foam.

More about Decotherm Classic Thermally Insulated Rolling Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Decotherm Classic Thermally Insulated Rolling Shutter.
 Size:
[1878 x 2500 mm].
[3000 x 3000 mm].
[5000 x 5000 mm].
 Arrangement:
[Vertical rolling shutter, face fixed].
[Vertical rolling shutter. Fixed between walls with additional posts].
 Finish:
[Galvanized Steel].
[Galvanized steel, with polyester coil coating in off white - RAL 9002].
[Galvanized steel, with polyester coil coating in white aluminium – RAL 9006].
 Operation:
[Single phase power].
[Three phase power]. - Standard.
 Other requirements:
[ ______ ]


top ^

Guidance

for Decotherm Classic Thermally Insulated Rolling Shutter

from Hörmann (UK) Ltd

More about Decotherm Classic Thermally Insulated Rolling Shutter: As standard - Options - Further information.

As standard

Dimensions:

  • Width (minimum): 1878 mm.
  • Width (maximum): 8000 mm.
  • Height (maximum): 8000 mm.

Performance:

Standards:

BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.

Wind pressure to BS EN 12424:

Class 2, doors to achieve higher wind classes are available on request.

Fire performance to DIN 4102:

Door section element materials are Class B2.

Thermal insulation (Individual shutter profile):

4.3 W/m²K.

Prevention of persons being lifted (Power operated only):

Dead-man’s control or torque limit on impulse control.

Shutter curtain:

Double-skinned thermally insulated:

Lath depth: 109 mm.

Face material:

Electroplated special steel with high-grade coil coating both sides.

Core material:

100% CFC-free PU rigid foam.

Frame/ Guides:

Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.

Options

Locking options:

  • Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

Hood:

Required on all shutters and grilles under 2500 mm high.

Hood finish:

Galvanized or stainless steel.

Vision/ Louvre Options:

  • Rows of vision panels: (State number of rows – for rectangular or triangular panels).
  • Transparent polycarbonate window, rectangular shaped.
  • Transparent polycarbonate window, triangular shaped.
  • Rhombus shaped arrangement 1 (approximately 510 mm x 340 mm).
  • Rhombus shaped arrangement 2 (approximately 830 mm x 525 mm).
  • Rhombus shaped arrangement 3 (approximately 1150 mm x 710 mm).
  • Rhombus shaped arrangement 4 (approximately 1470 mm x 900 mm).
  • Rhombus shaped arrangement 5 (approximately 1790 mm x 1080 mm).
  • ‘Logistic’ (transparent polycarbonate window rectangular shaped – four either side).
  • Ventilation grille non-transparent, Anthracite grey, based on RAL 7016 (cross section approx 22 cm² per ventilation grille).

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

HR116 Coil-coated Aluminium Thermally Insulated Roller Shutter

HR116 is a double-skinned thermally insulated rolling shutter designed for large structural openings. The sandwich core is of 100% CFC-free PU rigid foam. The outer skin is made up of 0.7 mm thick coil coated aluminium.Dimensions:Width (minimum): 500 mm.Width (maximum): 11750 mm.Height (maximum): 9000 mm.Performance:Standards:BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.Wind pressure to BS EN 12424:Class 3, doors to achieve higher wind classes are available on request.Fire performance to DIN 4102:Door section element materials are Class B2.Thermal insulation (Individual shutter profile):(4 x 4 m shutter, fitted): 5.8 W/m²K.Arrangement:Vertical roller shutter.Shutter curtain:Double skinned and thermally insulated.Core material:CFC-free PU rigid foam.Frame/ Guides:Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.Locking options:Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Shutter Security Kit.Other requirements:Vision panels:Transparent impact-resistant polycarbonate double panes: State number of rows.Ventilation grilles:State number of rows.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL137649.pdf&pg=

HR116 is a double-skinned thermally insulated rolling shutter designed for large structural openings. The sandwich core is of 100% CFC-free PU rigid foam. The outer skin is made up of 0.7 mm thick coil coated aluminium.

More about HR116 Coil-coated Aluminium Thermally Insulated Roller Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
HR116 Coil-coated Aluminium Thermally Insulated Roller Shutter.
 Size:
[500 x 2500 mm].
[3000 x 3000 mm].
[5000 x 5000 mm].
 Operation:
[Single phase power].
[Three phase power]. - Standard.
 Finish:
[Grey white RAL 9002].
[White aluminium RAL 9006].
 Other requirements:
[ ______ ]


top ^

Guidance

for HR116 Coil-coated Aluminium Thermally Insulated Roller Shutter

from Hörmann (UK) Ltd

More about HR116 Coil-coated Aluminium Thermally Insulated Roller Shutter: As standard - Options - Further information.

As standard

Dimensions:

  • Width (minimum): 500 mm.
  • Width (maximum): 11750 mm.
  • Height (maximum): 9000 mm.

Performance:

Standards:

BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.

Wind pressure to BS EN 12424:

Class 3, doors to achieve higher wind classes are available on request.

Fire performance to DIN 4102:

Door section element materials are Class B2.

Thermal insulation (Individual shutter profile):

(4 x 4 m shutter, fitted): 5.8 W/m²K.

Arrangement:

Vertical roller shutter.

Shutter curtain:

Double skinned and thermally insulated.

Core material:

CFC-free PU rigid foam.

Frame/ Guides:

Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.

Options

Locking options:

  • Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.
  • Shutter Security Kit.

Other requirements:

Vision panels:

Transparent impact-resistant polycarbonate double panes: State number of rows.

Ventilation grilles:

State number of rows.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

HR116 Steel Thermally Insulated Roller Shutter

HR116 is a double-skinned thermally insulated rolling shutter designed for large structural openings. The sandwich core is of 100% CFC-free PU rigid foam. The outer skin is made up of 0.7 mm thick galvanized sheet steel.Dimensions:Width (minimum): 500 mm.Width (maximum): 11750 mm.Height (maximum): 9000 mm.Performance:Standards:BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.Wind pressure to BS EN 12424:Class 3, doors to achieve higher wind classes are available on request.Fire performance to DIN 4102:Door section element materials are Class B2.Thermal insulation (Individual shutter profile):(4 x 4 m shutter, fitted): 5.0 W/m²K.Arrangement:Vertical roller shutter.Shutter curtain:Double skinned and thermally insulated – 0.7 mm galvanized steel front and back faces with core of CFC-free PU rigid foam.Finish:Polyester powder coated.Frame/ Guides:Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.Locking options:Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Shutter Security Kit.Other requirements:Vision panels:Transparent impact-resistant polycarbonate double panes: State number of rows.Ventilation grilles:State number of rows.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL137649.pdf&pg=

HR116 is a double-skinned thermally insulated rolling shutter designed for large structural openings. The sandwich core is of 100% CFC-free PU rigid foam. The outer skin is made up of 0.7 mm thick galvanized sheet steel.

More about HR116 Steel Thermally Insulated Roller Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
HR116 Steel Thermally Insulated Roller Shutter.
 Size:
[500 x 2500 mm].
[3000 x 3000 mm].
[5000 x 5000 mm].
 Shutter curtain:
[ ______ ]
  -Colour:
[Grey white RAL 9002].
[White aluminium RAL 9006].
 Finish:
[Galvanized steel].
[Galvanized steel, with polyester coil coating in off white - RAL 9002].
[Galvanized steel, with polyester coil coating in white aluminium – RAL 9006].
 Operation:
[Single phase power].
[Three phase power]. - Standard.
 Other requirements:
[ ______ ]


top ^

Guidance

for HR116 Steel Thermally Insulated Roller Shutter

from Hörmann (UK) Ltd

More about HR116 Steel Thermally Insulated Roller Shutter: As standard - Options - Further information.

As standard

Dimensions:

  • Width (minimum): 500 mm.
  • Width (maximum): 11750 mm.
  • Height (maximum): 9000 mm.

Performance:

Standards:

BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.

Wind pressure to BS EN 12424:

Class 3, doors to achieve higher wind classes are available on request.

Fire performance to DIN 4102:

Door section element materials are Class B2.

Thermal insulation (Individual shutter profile):

(4 x 4 m shutter, fitted): 5.0 W/m²K.

Arrangement:

Vertical roller shutter.

Shutter curtain:

Double skinned and thermally insulated – 0.7 mm galvanized steel front and back faces with core of CFC-free PU rigid foam.

Finish:

Polyester powder coated.

Frame/ Guides:

Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.

Options

Locking options:

  • Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.
  • Shutter Security Kit.

Other requirements:

Vision panels:

Transparent impact-resistant polycarbonate double panes: State number of rows.

Ventilation grilles:

State number of rows.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

HR116 Stucco Textured Aluminium Thermally Insulated Roller Shutter

HR116 is a double-skinned thermally insulated rolling shutter designed for large structural openings. The sandwich core is of 100% CFC-free PU rigid foam. The outer skin is made up of 0.7 mm thick stucco textured aluminium.Dimensions:Width (minimum): 500 mm.Width (maximum): 11750 mm.Height (maximum): 9000 mm.Performance:Standards:BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.Wind pressure to BS EN 12424:Class 3, doors to achieve higher wind classes are available on request.Fire performance to DIN 4102:Door section element materials are Class B2.Thermal insulation (Individual shutter profile):(4 x 4 m shutter, fitted): 5.8 W/m²K.Arrangement:Vertical roller shutter.Shutter curtain:Double skinned and thermally insulated.Core material:CFC-free PU rigid foam.Frame/ Guides:Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.Locking options:Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Shutter Security Kit.Other requirements:Vision panels:Transparent impact-resistant polycarbonate double panes: State number of rows.Ventilation grilles:State number of rows.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL137649.pdf&pg=

HR116 is a double-skinned thermally insulated rolling shutter designed for large structural openings. The sandwich core is of 100% CFC-free PU rigid foam. The outer skin is made up of 0.7 mm thick stucco textured aluminium.

More about HR116 Stucco Textured Aluminium Thermally Insulated Roller Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
HR116 Stucco Textured Aluminium Thermally Insulated Roller Shutter.
 Size:
[500 x 2500 mm].
[3000 x 3000 mm].
[5000 x 5000 mm].
 Operation:
[Single phase power].
[Three phase power]. - Standard.
 Other requirements:
[ ______ ]


top ^

Guidance

for HR116 Stucco Textured Aluminium Thermally Insulated Roller Shutter

from Hörmann (UK) Ltd

More about HR116 Stucco Textured Aluminium Thermally Insulated Roller Shutter: As standard - Options - Further information.

As standard

Dimensions:

  • Width (minimum): 500 mm.
  • Width (maximum): 11750 mm.
  • Height (maximum): 9000 mm.

Performance:

Standards:

BS EN 12604 (mechanical aspects) and BS EN 12453 (safety in use), with third party certification by a recognized testing authority.

Wind pressure to BS EN 12424:

Class 3, doors to achieve higher wind classes are available on request.

Fire performance to DIN 4102:

Door section element materials are Class B2.

Thermal insulation (Individual shutter profile):

(4 x 4 m shutter, fitted): 5.8 W/m²K.

Arrangement:

Vertical roller shutter.

Shutter curtain:

Double skinned and thermally insulated.

Core material:

CFC-free PU rigid foam.

Frame/ Guides:

Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.

Options

Locking options:

  • Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.
  • Shutter Security Kit.

Other requirements:

Vision panels:

Transparent impact-resistant polycarbonate double panes: State number of rows.

Ventilation grilles:

State number of rows.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

HR120 Aero Rolling Shutter

Full-frontal single-skinned shutter consisting of concave, perforated profiles. Offers good ventilation qualities and improved visual contact.The HR120 Aero is available as either bright-rolled aluminium or coil-coated aluminium.The HR120 Aero is available in Classic, Basic, or Manual rolling shutter options.Dimensions:Width (minimum): 500 mm.Width (maximum): 5000 mm (11750 mm maximum width when used indoors).Height (maximum): 8000 mm.Performance:Wind pressure to BS EN 12424:Class 2. Doors to achieve higher wind classes are available on request.Fire performance to DIN 4102:Door section element materials are Class A2 (non-flammable).Arrangement:Vertical roller shutter.Frame/ Guides:Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.Locking options:Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Shutter security kit (standard on Basic and Manual Rolling Shutters).Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL137649.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL262508.pdf&pg=

Full-frontal single-skinned shutter consisting of concave, perforated profiles. Offers good ventilation qualities and improved visual contact.

The HR120 Aero is available as either bright-rolled aluminium or coil-coated aluminium.

The HR120 Aero is available in Classic, Basic, or Manual rolling shutter options.

More about HR120 Aero Rolling Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
[HR120 Aero Basic Rolling Shutter].
[HR120 Aero Classic Rolling Shutter].
[HR120 Aero Manual Rolling Shutter].
 Size:
[500 x 2500 mm].
[3000 x 3000 mm].
[5000 x 8000 mm].
 Shutter curtain:
  -Type:
[Single skinned bright-rolled aluminium].
[Single skinned coil-coated aluminium].
  -Finish:
[Coil-coated aluminium].
[Self-coloured aluminium].
  -External colour:
[Grey white RAL 9002].
[White aluminium RAL 9006].
  -Internal colour:
[Basalt grey RAL 7012].
 Frame/ guides:
[2 mm thick galvanized steel side guides, complete with articulated windlock and integral brush seal].
[Galvanized steel anchor brackets].
[Galvanized steel height-adjustable brackets with mounting plate].
 Operation:
[Manual]. - Manual version only.
[Single phase power].
[Three phase power].


top ^

Guidance

for HR120 Aero Rolling Shutter

from Hörmann (UK) Ltd

More about HR120 Aero Rolling Shutter: As standard - Options - Further information.

As standard

Dimensions:

  • Width (minimum): 500 mm.
  • Width (maximum): 5000 mm (11750 mm maximum width when used indoors).
  • Height (maximum): 8000 mm.

Performance:

Wind pressure to BS EN 12424:

Class 2. Doors to achieve higher wind classes are available on request.

Fire performance to DIN 4102:

Door section element materials are Class A2 (non-flammable).

Arrangement:

Vertical roller shutter.

Frame/ Guides:

Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.

Options

Locking options:

  • Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.
  • Shutter security kit (standard on Basic and Manual Rolling Shutters).

Further Information

Literature:



RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

HR120 Rolling Shutter

The HR120 is a single-skinned profile rolling shutter designed for tough everyday operation, manufactured from either 0.7 mm thick galvanized sheet steel, bright rolled aluminium or coil-coated aluminium.The HR120 Aero is available in Classic, Basic, or Manual rolling shutter options.Dimensions:Width (minimum): 500 mm.Width (maximum): 11750 mm.Height (maximum): 9000 mm.Performance:Doors to comply with BS EN 12604 (mechanical aspects) and BS EN 12453 (requirements for safety in use of power operated doors) with third party certification by recognized testing authority.Wind pressure to BS EN 12424:Class 3. Doors to achieve higher wind classes are available on request.Fire performance to DIN 4102:Door section element materials are Class B2 (normally flammability).Thermal insulation (Individual shutter profile):(4 x 4 m shutter, fitted): 5.8W/m²K.Arrangement:Vertical roller shutter.Frame/ Guides:Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.Locking options:Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Shutter security kit (standard on Basic and Manual Rolling Shutters).Other requirements:Vision panels:Transparent impact-resistant polycarbonate double panes: State number of rows.Ventilation grilles:State number of rows.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL137649.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL262508.pdf&pg=

The HR120 is a single-skinned profile rolling shutter designed for tough everyday operation, manufactured from either 0.7 mm thick galvanized sheet steel, bright rolled aluminium or coil-coated aluminium.

The HR120 Aero is available in Classic, Basic, or Manual rolling shutter options.

More about HR120 Rolling Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
[HR120 Basic Rolling Shutter].
[HR120 Classic Rolling Shutter].
[HR120 Manual Rolling Shutter].
 Size:
[500 x 2500 mm].
[3000 x 3000 mm].
[5000 x 5000 mm].
 Shutter curtain:
  -Type:
[Bright rolled aluminium].
[Coil coated aluminium].
[Single skinned 0.7 mm galvanized sheet steel].
  -Finish:
[Coil-coated aluminium].
[Self-coloured aluminium].
[Self-coloured galvanized steel].
 Frame/ guides:
[2 mm thick galvanized steel side guides, complete with articulated windlock and integral brush seal].
[Galvanized steel anchor brackets].
[Galvanized steel height-adjustable brackets with mounting plate].
 Operation:
[Single phase power].
[Three phase power].


top ^

Guidance

for HR120 Rolling Shutter

from Hörmann (UK) Ltd

More about HR120 Rolling Shutter: As standard - Options - Further information.

As standard

Dimensions:

  • Width (minimum): 500 mm.
  • Width (maximum): 11750 mm.
  • Height (maximum): 9000 mm.

Performance:

Doors to comply with BS EN 12604 (mechanical aspects) and BS EN 12453 (requirements for safety in use of power operated doors) with third party certification by recognized testing authority.

Wind pressure to BS EN 12424:

Class 3. Doors to achieve higher wind classes are available on request.

Fire performance to DIN 4102:

Door section element materials are Class B2 (normally flammability).

Thermal insulation (Individual shutter profile):

(4 x 4 m shutter, fitted): 5.8W/m²K.

Arrangement:

Vertical roller shutter.

Frame/ Guides:

Galvanized steel side guides, complete with signal coloured plastic protection strips and integral brush seal, fixed with galvanized steel anchor brackets. Galvanized steel height-adjustable brackets with mounting plate.

Options

Locking options:

  • Standard shoot bolt for internal latching complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Lockable bottom profile engaging dead bolts into side guides at both ends, with internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.
  • Shutter security kit (standard on Basic and Manual Rolling Shutters).

Other requirements:

Vision panels:

Transparent impact-resistant polycarbonate double panes: State number of rows.

Ventilation grilles:

State number of rows.

Further Information

Literature:



RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

Type HSR

A double skinned, aluminium, high speed roller shutter door incorporating non-contact roll up technology.Door thickness is 20 mm overall. Door skins are anodized to DIN 17611 and stained as standard in a natural colour (E6/ EV1).Shutters can be powder coated in a range of RAL colours on request.Partially glazed sections, featuring acrylic panes are supplied on request. The number and size of windows is adjusted to the size of the shutter.Dimensions:Size maximum: 5000 x 5000 mm.Panel thickness: 20 mm overall.Performance:Wind pressure to EN 12424:Class 2.Safety equipment:To EN 12604, EN 12453.Acoustic Insulation to EN 20140:27 dB.Curtain:Double skin aluminium, 20 mm overall.Finish:Anodized E6/ EV1.Frame/ Guides:Galvanized steel.Operation:Single Phase 230V Frequency inverter control, seven-segment function display. Direct Drive 1.1KW Motor IP55.Open-Close-Stop membrane keypad, mains isolator switch. Variable auto-time return.Emergency opening pull rope via spring shaft/ counterweight system.Opto-sensor self monitoring fail safe safety edge.Standard guide mounted photocell safety beam.Control and safety options:External push button.Pull cord.Remote control: 1 no. hand held transmitter and receiver.Motion radar.Induction loops (Vehicle detection).Traffic lights.Additional safety beams.Breakaway system.Other requirements:Glazing – Acrylic panes distributed according to door width.

A double skinned, aluminium, high speed roller shutter door incorporating non-contact roll up technology.

Door thickness is 20 mm overall. Door skins are anodized to DIN 17611 and stained as standard in a natural colour (E6/ EV1).

Shutters can be powder coated in a range of RAL colours on request.

Partially glazed sections, featuring acrylic panes are supplied on request. The number and size of windows is adjusted to the size of the shutter.

More about Type HSR:
As standard - Options - Further information.

PendingHIGH SPEED DOORS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Type HSR High Speed Roller Shutter Door.
 Size:
[2500 x 2500 mm].
[3000 x 3000 mm].
[5000 x 5000 mm].


top ^

Guidance

for Type HSR

from Hörmann (UK) Ltd

More about Type HSR: As standard - Options - Further information.

As standard

Dimensions:

  • Size maximum: 5000 x 5000 mm.
  • Panel thickness: 20 mm overall.

Performance:

Wind pressure to EN 12424:

Class 2.

Safety equipment:

To EN 12604, EN 12453.

Acoustic Insulation to EN 20140:

27 dB.

Curtain:

Double skin aluminium, 20 mm overall.

Finish:

Anodized E6/ EV1.

Frame/ Guides:

Galvanized steel.

Operation:

  • Single Phase 230V Frequency inverter control, seven-segment function display. Direct Drive 1.1KW Motor IP55.
  • Open-Close-Stop membrane keypad, mains isolator switch. Variable auto-time return.
  • Emergency opening pull rope via spring shaft/ counterweight system.
  • Opto-sensor self monitoring fail safe safety edge.
  • Standard guide mounted photocell safety beam.

Options

Control and safety options:

  • External push button.
  • Pull cord.
  • Remote control: 1 no. hand held transmitter and receiver.
  • Motion radar.
  • Induction loops (Vehicle detection).
  • Traffic lights.
  • Additional safety beams.
  • Breakaway system.

Other requirements:

Glazing – Acrylic panes distributed according to door width.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

View larger image of RollMatic Roller Garage Door from Hörmann (UK) LtdRollMatic Roller Garage Door

The RollMatic garage door is made of high-quality corrosion-free aluminium, which allows parking close to the front of the garage; the inside ceiling area of the garage remains available. The RollMatic door is equipped, as standard, with state-of-the-art Hörmann operator technology.Features:Barrel casing as standard.Integrated mechanical door security kit.Minimum fitting effort.Storm anchors as standard equipment.Tension spring technology with patented multi-spring system.Standard:BS EN 13241-1.Dimensions:Width: (minimum/ maximum): 1000/ 5000 mm.Height: (minimum/ maximum): 1900/ 3000 mm.See manufacturer's size range chart for permitted combinations of heights, widths and headroom requirements.Wind pressure (to BS EN 12424):3500 mm door width (maximum): Class 5.4500 mm door width (maximum): Class 4.5000 mm door width (maximum): Class 3.Shutter curtain:Double-skinned thermally insulated lath.Face material: Smooth surface aluminium profile.Core material: 100% CFC-free polyurethane rigid foam.Operation:The operator is located outside of the barrel casing for trouble-free maintenance. Start and stop of the RollMatic door are particularly soft and quiet. The spring compensation and automatic cut-out, render an additional closing edge safety device unnecessary. An internal push button and light are integrated in the control housing.The built-in automatic safety cut-out secures the closing edge and immediately stops the door if there is an obstacle.Emergency release is via a pull cord as standard equipment and the door can be easily pushed open after actuation; no crank handle is required.Colour:RollMatic roller garage doors are delivered in Traffic white as standard; in addition there are eight preferred colours available without a surcharge. Two Decograin surfaces in Golden Oak and Rosewood Mahogany are also available.Glazed elements:The glazed elements allow daylight to enter the garage. A maximum of ten profiles with glazing elements can be used for each door.

The RollMatic garage door is made of high-quality corrosion-free aluminium, which allows parking close to the front of the garage; the inside ceiling area of the garage remains available. The RollMatic door is equipped, as standard, with state-of-the-art Hörmann operator technology.

Features:

  • Barrel casing as standard.
  • Integrated mechanical door security kit.
  • Minimum fitting effort.
  • Storm anchors as standard equipment.
  • Tension spring technology with patented multi-spring system.

Standard:

BS EN 13241-1.

More about RollMatic Roller Garage Door:
As standard - Options - Further information.

PendingROLLER GARAGE DOOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
RollMatic Roller Garage Door.
 Size (w x h):
[??? x ??? mm].
[As drawing ???].
 Arrangement:
[Behind the opening].
[Between openings].
 Colour:
[RAL 9016 Traffic white]. - Manufacturer's standard.
[RAL 3003 Ruby red].
[RAL 5011 Steel blue].
 Control:
[Hand transmitter HS 1]. - One function.
[Hand transmitter HS 4]. - Four functions.
[Hand transmitter HSD 2-A]. - Aluminium look for two functions, with button lock-out.
 Other requirements:
[None].
[Acoustic alarm].
[Chamfered bottom profile]. - Compensates for slopes of up to 300 mm.


top ^

Guidance

for RollMatic Roller Garage Door

from Hörmann (UK) Ltd

More about RollMatic Roller Garage Door: As standard - Options - Further information.

As standard

Dimensions:

  • Width: (minimum/ maximum): 1000/ 5000 mm.
  • Height: (minimum/ maximum): 1900/ 3000 mm.
  • See manufacturer's size range chart for permitted combinations of heights, widths and headroom requirements.

Wind pressure (to BS EN 12424):

  • 3500 mm door width (maximum): Class 5.
  • 4500 mm door width (maximum): Class 4.
  • 5000 mm door width (maximum): Class 3.

Shutter curtain:

  • Double-skinned thermally insulated lath.
  • Face material: Smooth surface aluminium profile.
  • Core material: 100% CFC-free polyurethane rigid foam.

Operation:

  • The operator is located outside of the barrel casing for trouble-free maintenance. Start and stop of the RollMatic door are particularly soft and quiet. The spring compensation and automatic cut-out, render an additional closing edge safety device unnecessary. An internal push button and light are integrated in the control housing.
  • The built-in automatic safety cut-out secures the closing edge and immediately stops the door if there is an obstacle.
  • Emergency release is via a pull cord as standard equipment and the door can be easily pushed open after actuation; no crank handle is required.

Options

Colour:

RollMatic roller garage doors are delivered in Traffic white as standard; in addition there are eight preferred colours available without a surcharge. Two Decograin surfaces in Golden Oak and Rosewood Mahogany are also available.

Glazed elements:

The glazed elements allow daylight to enter the garage. A maximum of ten profiles with glazing elements can be used for each door.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

ProMatic Garage Door Operator

Features:Adjustable soft start and stop for gentle quiet door travel.Automatic door locking makes forced opening practically impossible.Reliable automatic safety cut out immediately stops the door if it encounters an obstacle.Maintenance free toothed belt with automatic retensioning (Hörmann patent).Four-button mini hand transmitter (HSM 4) and integral radio receiver as standard.Two minute light (Akku; 30 second).Internal emergency release.Easy and fast fitting thanks to optimally prepared fixing material.Battery (Akku only):Operation period (approximately): 40 days.Charging time: 5–10 hours.Weight: 8.8 kg.Size: 330 x 220 x 115 mm.Product reference: - ProMatic:Pull and Push force: 500 N.Peak force: 650 N.Opening speed (maximum): 140 mm/s.Door width (maximum 10 m² door surface): 5500 mm.Usage (maximum): 12 open/ close cycles per day.- ProMatic PSuitable for larger doors.Pull and Push force: 600 N.Peak force: 750 N.Opening speed (maximum): 140 mm/s.Door width (maximum 11.5 m² door surface): 5500 mm.Usage (maximum): 20 open/ close cycles per day.- ProMatic Akku:Battery operated.Pull and Push force: 350 N.Peak force: 400 N.Opening speed (maximum): 130 mm/s.Door width (maximum 8 m² door surface): 3000 mm.Usage (maximum): Four open/ close cycles per day.Accessories:- Solar module:Battery charger for Akku. Includes 10 m connecting lead and charge controller.Size: 330 x 580 mm.- Hand transmitter:Single transmitter can operate both Hörmann garage doors and gates.Protection against unauthorized use with one trillion possible radio codes.Stable range: 868.3 MHz frequency.Homelink (version 7) compatible.Impact resistant – permanently fixed antenna.Simple transmission of coding between transmitters.

Features:

  • Adjustable soft start and stop for gentle quiet door travel.
  • Automatic door locking makes forced opening practically impossible.
  • Reliable automatic safety cut out immediately stops the door if it encounters an obstacle.
  • Maintenance free toothed belt with automatic retensioning (Hörmann patent).
  • Four-button mini hand transmitter (HSM 4) and integral radio receiver as standard.
  • Two minute light (Akku; 30 second).
  • Internal emergency release.
  • Easy and fast fitting thanks to optimally prepared fixing material.

More about ProMatic Garage Door Operator:
As standard - Options - Further information.

PendingGARAGE DOOR OPERATOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
[ProMatic Garage Door Operator].
[ProMatic P Garage Door Operator].
[ProMatic Akku Garage Door Operator]. - Battery operated.
 Accessories:
[None].
[Battery back-up].
[Hinged door track application].


top ^

Guidance

for ProMatic Garage Door Operator

from Hörmann (UK) Ltd

More about ProMatic Garage Door Operator: As standard - Options - Further information.

As standard

Battery (Akku only):

  • Operation period (approximately): 40 days.
  • Charging time: 5–10 hours.
  • Weight: 8.8 kg.
  • Size: 330 x 220 x 115 mm.

Options

Product reference:

- ProMatic:

  • Pull and Push force: 500 N.
  • Peak force: 650 N.
  • Opening speed (maximum): 140 mm/s.
  • Door width (maximum 10 m² door surface): 5500 mm.
  • Usage (maximum): 12 open/ close cycles per day.

- ProMatic P

  • Suitable for larger doors.
  • Pull and Push force: 600 N.
  • Peak force: 750 N.
  • Opening speed (maximum): 140 mm/s.
  • Door width (maximum 11.5 m² door surface): 5500 mm.
  • Usage (maximum): 20 open/ close cycles per day.

- ProMatic Akku:

  • Battery operated.
  • Pull and Push force: 350 N.
  • Peak force: 400 N.
  • Opening speed (maximum): 130 mm/s.
  • Door width (maximum 8 m² door surface): 3000 mm.
  • Usage (maximum): Four open/ close cycles per day.

Accessories:

- Solar module:

  • Battery charger for Akku. Includes 10 m connecting lead and charge controller.
  • Size: 330 x 580 mm.

- Hand transmitter:

  • Single transmitter can operate both Hörmann garage doors and gates.
  • Protection against unauthorized use with one trillion possible radio codes.
  • Stable range: 868.3 MHz frequency.
  • Homelink (version 7) compatible.
  • Impact resistant – permanently fixed antenna.
  • Simple transmission of coding between transmitters.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

SupraMatic Garage Door Operator

Faster opening speed; opens a sectional door almost as quickly as an automatic up-and-over door.Features:Adjustable soft start and stop for gentle quiet door travel.Automatic door locking makes forced opening practically impossible.Reliable automatic safety cut out immediately stops the door if it encounters an obstacle.Maintenance free toothed belt with automatic retensioning (Hörmann patent).Four-button mini hand transmitter (HSM 4) and integral radio receiver as standard (not SupraMatic H).Adjustable lighting (1–5 minutes).Internal emergency release.Easy and fast fitting thanks to optimally prepared fixing material.Individually adjustable second opening height – allows garage ventilation without fully opening the door.Cover:Brushed aluminium.SupraMatic P:Photocell EL: 101. Automatically detects people and objects.Type:- SupraMatic E:Pull and Push force: 650 N.Peak force: 800 N.Opening speed (maximum): 220 mm/s.Door width (maximum): 5500 mm.Usage (maximum): 25 open/ close cycles per day.- SupraMatic H:Suitable for special requirements in underground and collective garages.Pull and Push force: 1000 N.Peak force: 1200 N.Opening speed (maximum): 220 mm/s.Door width (maximum): 5500 mm.Usage (maximum): 100 open/ close cycles per day.- SupraMatic P:Suitable for heavy timber doors and doors with wicket doors.Pull and Push force: 750 N.Peak force: 1000 N.Opening speed (maximum): 220 mm/s.Door width (maximum): 5500 mm.Usage (maximum): 50 open/ close cycles per day.Accessories:- Hand transmitter:Single transmitter can operate both Hörmann garage doors and gates.Protection against unauthorized use with one trillion possible radio codes.Stable range: 868.3 MHz frequency.Homelink (version 7) compatible.Impact resistant – permanently fixed antenna.Simple transmission of coding between transmitters.

Faster opening speed; opens a sectional door almost as quickly as an automatic up-and-over door.

Features:

  • Adjustable soft start and stop for gentle quiet door travel.
  • Automatic door locking makes forced opening practically impossible.
  • Reliable automatic safety cut out immediately stops the door if it encounters an obstacle.
  • Maintenance free toothed belt with automatic retensioning (Hörmann patent).
  • Four-button mini hand transmitter (HSM 4) and integral radio receiver as standard (not SupraMatic H).
  • Adjustable lighting (1–5 minutes).
  • Internal emergency release.
  • Easy and fast fitting thanks to optimally prepared fixing material.
  • Individually adjustable second opening height – allows garage ventilation without fully opening the door.

More about SupraMatic Garage Door Operator:
As standard - Options - Further information.

PendingGARAGE DOOR OPERATOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
SupraMatic Garage Door Operator.
 Type:
[E].
[H].
[P].
 Accessories:
[None].
[Battery back-up].
[Hinged door track application].


top ^

Guidance

for SupraMatic Garage Door Operator

from Hörmann (UK) Ltd

More about SupraMatic Garage Door Operator: As standard - Options - Further information.

As standard

Cover:

Brushed aluminium.

SupraMatic P:

Photocell EL: 101. Automatically detects people and objects.

Options

Type:

- SupraMatic E:

  • Pull and Push force: 650 N.
  • Peak force: 800 N.
  • Opening speed (maximum): 220 mm/s.
  • Door width (maximum): 5500 mm.
  • Usage (maximum): 25 open/ close cycles per day.

- SupraMatic H:

Suitable for special requirements in underground and collective garages.

  • Pull and Push force: 1000 N.
  • Peak force: 1200 N.
  • Opening speed (maximum): 220 mm/s.
  • Door width (maximum): 5500 mm.
  • Usage (maximum): 100 open/ close cycles per day.

- SupraMatic P:

Suitable for heavy timber doors and doors with wicket doors.

  • Pull and Push force: 750 N.
  • Peak force: 1000 N.
  • Opening speed (maximum): 220 mm/s.
  • Door width (maximum): 5500 mm.
  • Usage (maximum): 50 open/ close cycles per day.

Accessories:

- Hand transmitter:

  • Single transmitter can operate both Hörmann garage doors and gates.
  • Protection against unauthorized use with one trillion possible radio codes.
  • Stable range: 868.3 MHz frequency.
  • Homelink (version 7) compatible.
  • Impact resistant – permanently fixed antenna.
  • Simple transmission of coding between transmitters.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

Radio Switch

Easy to install – no cables required: the code or impulse is transmitted via radio.Product reference:- External:CTR 1b/ CTR 3b: One/ Three function with illuminated buttons and weather resistant membrane keypad.CTR 1d/ CTR 3d: One/ Three function with hinged protective cover.CTV 1/ CTV 3: One/ Three function, especially robust, protected against vandalism.ESA 40/ ESU 40: Surface mounted/ Recessed versions with three keys.FL 12/ FL 100: Two function finger scan. Can open garage door via a fingerprint; can store 12/ 100 fingerprints.STAP 40/ STUP 40: Surface mounted/ Recessed versions with three keysTTR 100/ TTR 1000: Single function with two keys for maximum 12/ 100/ 1000 keys.- Internal and External:FCT 3b: Three function, with illuminated buttons and hinged protective cover.FCT 10b: Ten function, with illuminated buttons and weather resistant membrane keypad.FFL 12: Two function with 12 individual fingerprints (maximum). Programming in the fingerprints can be done easily and directly on the finger scan.FIT 2: Two function with operation via two impulse buttons. Optionally via a connection key switch that can be over-ridden during holiday periods.FUS 2/ HSU 2 and TUPS 2: Two function in conjunction with a commercially available recessed switch. HSU 2 for all commercially available switch boxes with 55 mm diameter connection: FUS 2 including 9 V battery/ connection option for 24 V maximum voltages.Accessories: - STS 1/ STS 2.Available with one or two adaptors for command units.Suitable for transponder key switch TTR 100 or 1000, radio code switch FCT 10b, or code switch CTR 1 or 3.Post: Aluminium, finished White RAL 9006: cover and base, Slate Grey RAL 7015.Protected for outdoor use in accordance with IP 44.Height: 1250 mm.Diameter: 300 mm.

Easy to install – no cables required: the code or impulse is transmitted via radio.

More about Radio Switch:
- Options - Further information.

PendingRADIO SWITCH:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
[CTR 1b]. - Code switch.
[CTR 3b]. - Code switch.
[CTR 1d]. - Code switch.
 Accessories:
[None].
[STS 1]. - Key switch post.
[STS 2]. - Key switch post.


top ^

Guidance

for Radio Switch

from Hörmann (UK) Ltd

More about Radio Switch: - Options - Further information.

Options

Product reference:

- External:

  • CTR 1b/ CTR 3b: One/ Three function with illuminated buttons and weather resistant membrane keypad.
  • CTR 1d/ CTR 3d: One/ Three function with hinged protective cover.
  • CTV 1/ CTV 3: One/ Three function, especially robust, protected against vandalism.
  • ESA 40/ ESU 40: Surface mounted/ Recessed versions with three keys.
  • FL 12/ FL 100: Two function finger scan. Can open garage door via a fingerprint; can store 12/ 100 fingerprints.
  • STAP 40/ STUP 40: Surface mounted/ Recessed versions with three keys
  • TTR 100/ TTR 1000: Single function with two keys for maximum 12/ 100/ 1000 keys.

- Internal and External:

  • FCT 3b: Three function, with illuminated buttons and hinged protective cover.
  • FCT 10b: Ten function, with illuminated buttons and weather resistant membrane keypad.
  • FFL 12: Two function with 12 individual fingerprints (maximum). Programming in the fingerprints can be done easily and directly on the finger scan.
  • FIT 2: Two function with operation via two impulse buttons. Optionally via a connection key switch that can be over-ridden during holiday periods.
  • FUS 2/ HSU 2 and TUPS 2: Two function in conjunction with a commercially available recessed switch. HSU 2 for all commercially available switch boxes with 55 mm diameter connection: FUS 2 including 9 V battery/ connection option for 24 V maximum voltages.

Accessories:

- STS 1/ STS 2.

  • Available with one or two adaptors for command units.
  • Suitable for transponder key switch TTR 100 or 1000, radio code switch FCT 10b, or code switch CTR 1 or 3.
  • Post: Aluminium, finished White RAL 9006: cover and base, Slate Grey RAL 7015.
  • Protected for outdoor use in accordance with IP 44.
  • Height: 1250 mm.
  • Diameter: 300 mm.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 
Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 11 December 2017