A-Z Manufacturers (Hörmann (UK) Ltd) |  CAWS Index (L20 60)
Hörmann (UK) Ltd

Hörmann (UK) Ltd

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

Gee Road, Coalville, Leicestershire. LE67 4JW

RIBA Product Selector
NBS National BIM Library
RIBA CPD

This NBS Plus page covers doors, up and over garage door, sectional garage door, garage door, up-and-over garage door, double up-and-over garage door and roller garage door

relating to clause 60 DOORS

in L20 Doors/ shutters/ hatches.

For more NBS Plus information from this company, see the Hörmann (UK) Ltd overview page which includes a clause list and a product list.


Products from Hörmann (UK) Ltd

Hörmann offers a design and specification service; consultation early in the design process is recommended.

Select to expand
Sectional Overhead Doors (3)
Select to expand
Garage doors (7)
 

ALR 40

An aluminium, double glazed sectional overhead door, 16 or 26 mm thick insulated infill panels can be incorporated instead of the glazed panels if required.Door type ALR 40B is available with wider glazing panels and 91 mm rail profiles.Track system:Galvanized steel track system with side frames shaped as hand guards.Door panels:Aluminium framed glazing units. Finger trap protection to panel joint inside and out.Finish as delivered:Anodized to DIN 17611.Colour:Natural – E6/ EV1.Wind pressure:To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.Fire performance:To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.Manual opening force:<260 N.Performance (Power operated only):Closing force:<400 N.Ironmongery:Locking options – manual doors:Standard shoot bolt operation side or both sides.Foot latch.Internal/ external lock prepared for profile cylinder.Locking options – electric doors:Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.Dacromet finish for wet and marine environments.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL415865.pdf&pg=

An aluminium, double glazed sectional overhead door, 16 or 26 mm thick insulated infill panels can be incorporated instead of the glazed panels if required.

Door type ALR 40B is available with wider glazing panels and 91 mm rail profiles.

More about ALR 40:
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
ALR 40 Aluminium sectional glazed door.
 Arrangement:
[High lift]. - Ref: H.
[High lift with inclination]. - Ref: HD.
[High lift with double radius (2 x 45°)]. - Ref: HS.
 Size:
[ ______ ]
  -Width:
[1000 mm].
[2000 mm].
[3000 mm].
  -Height:
[1750 mm].
[2000 mm].
[2500 mm].
 Operation:
[Fast action operator].
[Geared chain hoist with/ without chain tensioner].
[Hoist with chain].


top ^

Guidance

for ALR 40

from Hörmann (UK) Ltd

More about ALR 40: As standard - Options - Further information.

As standard

Track system:

Galvanized steel track system with side frames shaped as hand guards.

Door panels:

Aluminium framed glazing units. Finger trap protection to panel joint inside and out.

Finish as delivered:

Anodized to DIN 17611.

Colour:

Natural – E6/ EV1.

Wind pressure:

To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.

Fire performance:

To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.

Manual opening force:

<260 N.

Performance (Power operated only):

Closing force:

<400 N.

Options

Ironmongery:

Locking options – manual doors:

  • Standard shoot bolt operation side or both sides.
  • Foot latch.
  • Internal/ external lock prepared for profile cylinder.

Locking options – electric doors:

  • Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

  • Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.
  • Dacromet finish for wet and marine environments.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

APU 40

An insulated sectional overhead door consisting of a double skinned galvanized steel insulated bottom panel and double glazed panels with aluminium glazing sections.Sectional door type APU 40B is available with wider glazing panels.Track system:Galvanized steel track system with side frames shaped as hand guards.Door panels:Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.Finish as delivered:Polyester stucco embossed coating on both sides.Internal colour:Off white – RAL 9002.Wind pressure:To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.Fire performance:To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.Manual opening force:<260 N.Performance (Power operated only):Closing force:<400 N.Ironmongery:Locking options – manual doors:Standard shoot bolt operation side or both sides.Foot latch.Internal/ external lock prepared for profile cylinder.Locking options – electric doors:Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.Dacromet finish for wet and marine environments.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL239332.pdf&pg=

An insulated sectional overhead door consisting of a double skinned galvanized steel insulated bottom panel and double glazed panels with aluminium glazing sections.

Sectional door type APU 40B is available with wider glazing panels.

More about APU 40:
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
APU 40 Insulated/ Glazed combination sectional door.
 Arrangement:
[High lift]. - Ref: H.
[High lift with inclination]. - Ref: HD.
[High lift with double radius (2 x 45°)]. - Ref: HS.
 Size:
[ ______ ]
  -Width:
[1000 mm].
[2000 mm].
[3000 mm].
  -Height:
[1750 mm].
[2000 mm].
[2500 mm].
 Door panels:
[ ______ ]
  -External colour:
[Anthracite grey, RAL 7016].
[Azure blue, RAL 5009].
[Flame red, RAL 3000].
 Glazing panels:
[??? rows of vision panels].
[Full width 52 mm aluminium glazing frame].
[Full width 91 mm aluminium glazing frame].
 Operation:
[Fast action operator].
[Geared chain hoist with/ without chain tensioner].
[Hoist with chain].


top ^

Guidance

for APU 40

from Hörmann (UK) Ltd

More about APU 40: As standard - Options - Further information.

As standard

Track system:

Galvanized steel track system with side frames shaped as hand guards.

Door panels:

Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.

Finish as delivered:

Polyester stucco embossed coating on both sides.

Internal colour:

Off white – RAL 9002.

Wind pressure:

To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.

Fire performance:

To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.

Manual opening force:

<260 N.

Performance (Power operated only):

Closing force:

<400 N.

Options

Ironmongery:

Locking options – manual doors:

  • Standard shoot bolt operation side or both sides.
  • Foot latch.
  • Internal/ external lock prepared for profile cylinder.

Locking options – electric doors:

  • Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

  • Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.
  • Dacromet finish for wet and marine environments.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

SPU 40

An insulated sectional overhead door consisting of a combination of 500 mm and 375 mm deep or 750 mm and 625 mm deep double-skinned galvanized steel, horizontally ribbed door panels. The steel sections are horizontally profiled at 125 mm centres to match STE 40 and TPU 40 steel doors.Track system:Galvanized steel track system with side frames shaped as hand guards:Door panels:Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.Finish as delivered:Polyester stucco embossed coating on both sides.Internal colour:Off white – RAL 9002.Wind pressure:To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.Fire performance:To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.Manual opening force:<260 N.Performance (Power operated only):Closing force:<400 N.Glazing options:3 mm Clear synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.3 mm Crystal structured synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.Clear synthetic double panes – 11, 16, 29, 31 or 33 mm: For compound window with zinc die-cast frame and for aluminium glazing frame.Crystal structured synthetic double panes – 16 mm or 29 mm: For aluminium glazing frame.6 mm Clear polycarbonate pane, burglar proof and impact resistant: For aluminium glazing frame.16 mm Clear polycarbonate double pane, burglar proof and impact resistant: For compound window with zinc die-cast frame and for aluminium glazing frame.16 mm Double moulded unit: For aluminium glazing frame.Expanded mesh, galvanized steel, powder coated: For aluminium glazing frame.Perforated sheet – smooth stainless steel: For aluminium glazing frame.Aluman sheet infill 1.5 mm, stucco embossed: For aluminium glazing frame.PU sandwich infill – aluminium sheet cladding 16 mm, anodized two sides, smooth finish: For aluminium glazing frame.PU sandwich infill Aluman sheet clad, both sides stucco embossed 16 mm or 26 mm: For aluminium glazing frame.Ironmongery:Locking options – manual doors:Standard shoot bolt operation side or both sides.Foot latch.Internal/ external lock prepared for profile cylinder.Locking options – electric doors:Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.Other requirements:Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.Dacromet finish for wet and marine environments.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL415865.pdf&pg=

An insulated sectional overhead door consisting of a combination of 500 mm and 375 mm deep or 750 mm and 625 mm deep double-skinned galvanized steel, horizontally ribbed door panels. The steel sections are horizontally profiled at 125 mm centres to match STE 40 and TPU 40 steel doors.

More about SPU 40:
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
SPU 40 Double skinned insulated sectional door.
 Arrangement:
[High lift]. - Ref: H.
[High lift with inclination]. - Ref: HD.
[High lift with double radius (2 x 45°)]. - Ref: HS.
 Size:
[ ______ ]
  -Width:
[1000 mm].
[2000 mm].
[3000 mm].
  -Height:
[1750 mm].
[2000 mm].
[2500 mm].
 Door panels:
[ ______ ]
  -External colour:
[Anthracite grey, RAL 7016].
[Azure blue, RAL 5009].
[Flame red, RAL 3000].
 Glazing panels:
[??? rows of vision panels].
[Type A: Vision panels (635 x 245 mm) with synthetic or zinc die cast frame].
[Type C: Circular vision panels (244 mm diameter) with synthetic frame].
 Operation:
[Fast action operator].
[Single phase power].
[Three phase power].


top ^

Guidance

for SPU 40

from Hörmann (UK) Ltd

More about SPU 40: As standard - Options - Further information.

As standard

Track system:

Galvanized steel track system with side frames shaped as hand guards:

Door panels:

Double-skinned galvanized steel with HFCF-CFC free polyurethane rigid foam sandwich core, horizontally ribbed door panel with finger trap protection to panel joint inside and out.

Finish as delivered:

Polyester stucco embossed coating on both sides.

Internal colour:

Off white – RAL 9002.

Wind pressure:

To BS EN 12424 Class 2 or 3. Doors to achieve higher wind classes are available on request.

Fire performance:

To DIN 4102 Door section element materials are non-flammable – Class A2/ B2.

Manual opening force:

<260 N.

Performance (Power operated only):

Closing force:

<400 N.

Options

Glazing options:

  • 3 mm Clear synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.
  • 3 mm Crystal structured synthetic pane: For window with zinc die-cast frame and for aluminium glazing frame.
  • Clear synthetic double panes – 11, 16, 29, 31 or 33 mm: For compound window with zinc die-cast frame and for aluminium glazing frame.
  • Crystal structured synthetic double panes – 16 mm or 29 mm: For aluminium glazing frame.
  • 6 mm Clear polycarbonate pane, burglar proof and impact resistant: For aluminium glazing frame.
  • 16 mm Clear polycarbonate double pane, burglar proof and impact resistant: For compound window with zinc die-cast frame and for aluminium glazing frame.
  • 16 mm Double moulded unit: For aluminium glazing frame.
  • Expanded mesh, galvanized steel, powder coated: For aluminium glazing frame.
  • Perforated sheet – smooth stainless steel: For aluminium glazing frame.
  • Aluman sheet infill 1.5 mm, stucco embossed: For aluminium glazing frame.
  • PU sandwich infill – aluminium sheet cladding 16 mm, anodized two sides, smooth finish: For aluminium glazing frame.
  • PU sandwich infill Aluman sheet clad, both sides stucco embossed 16 mm or 26 mm: For aluminium glazing frame.

Ironmongery:

Locking options – manual doors:

  • Standard shoot bolt operation side or both sides.
  • Foot latch.
  • Internal/ external lock prepared for profile cylinder.

Locking options – electric doors:

  • Standard shoot bolt complete with security anti-lift device and electrical interlock switch, operation side or both sides.
  • Internal/ external lock prepared for profile cylinder and complete with electrical interlock switch.

Other requirements:

  • Wicket door with or without threshold (Pass door): Outward opening inset wicket personnel door (position dependent on door width) complete with profile cylinder mortise lock, black plastic lever handle set, door closer and electrical interlock switch.
  • Dacromet finish for wet and marine environments.

Further Information

Literature:


RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

View larger image of Sectional Garage Doors from Hörmann (UK) LtdSectional Garage Door - Continental Range

Track-guided sectional garage door that fits anywhere and saves space.Benefits:Space-saving: Sectional doors open vertically upwards and are suspended under the ceiling to save space. This constructional principle means you can make full use of the space inside and in front of the garage for parking.Variable when fitting: The shape of the garage door opening is not of prime importance. Whether square, angled, with segmental or full centred arch – a Hörmann sectional door always fits.Wider passage: Sectional doors with a passage width extended by up to 140 mm can make it much easier to park modern, larger vehicles and SUVs. Sealed all round: Flexible and weather-resistant seals on all four sides of Hörmann’s sectional doors keep out the wind and rain.Additional intermediate seals: Double-skinned doors have additional high-grade intermediate seals between the individual door sections.Bottom seal: With its large-sized profile lip, the bottom seal can easily accommodate slight irregularities in the floor.Track Versions:-Tension Spring (Z) tracks with tension technology (not for LPU sectional doors) - single doors with Z track tension springs giving low headroom as standard.Normal (N) tracks with torsion spring technology - Double doors with N track torsion springs.Low-headroom (L) tracks with torsion spring technology.For more track information on these and further track versions consult manufacturer.Standards:Tested and certified by TÜV in accordance with TTZ directive “Break-in resistance for garage doors”. Doors with wicket doors and doors with glazing are an exception.Performance characteristics according to EN 13241-1. Consult manufacturer's literature for thermal and acoustic insulation values.Size (w x h): - Standard:2250 x 1875, 2000 and 2125 mm.2375 x 1875, 2000, 2125 and 2250 mm.2500 x 1875, 2000, 2125, 2250, 2375 and 2500 mm. 2500 x 2750 mm only with track application N.2625 x 2125 mm.2750 x 2000, 2125, 2250, 2375 and 2500 mm. 2750 x 2750 only with track application N.3000 x 2000, 2125, 2250, 2375 and 2500 mm. - Modernisation sizes:2190 x 1955 and 2080 mm.2315 x 1955, 2080 and 2205 mm.2440 x 1955, 2080 and 2205 mm.2940 x 2080 mm.2500 x 2750 mm.2750 x 2750 mm.3000 x 3000 mm.3250 x 2000, 2125 and 2250 mm.3500 x 2000, 2125 and 2250 mm.3750 x 2000, 2125 and 2250 mm.4000 x 2000, 2125 and 2250 mm.4250 x 2000, 2125 and 2250 mm.4500 x 2000, 2125 and 2250 mm.4750 x 2000, 2125 and 2250 mm.5000 x 2000, 2125 and 2250 mm.5500 x 2000, 2125 and 2250 mm.6000 x 2000, 2125 and 2250 mm.6500 x 2000, 2125 and 2250 mm.Finish: - Decograin:UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber. - Micrograin:With its delicately lined profile, the new Micrograin surface complements the elegance of modern architecture. - Silkgrain:Silky-smooth elegant surface finish. - Woodgrain:Robust woodgrain structured surface with authentic sawn timber look. - Solid timber:Nordic pine or hemlock, boarded, panelled or individual design. - Colour:Single and double skin steel door leaves are galvanized and available in Traffic white as standard. Double-skinned garage doors additionally available in 15 factory colours, as well as about 200 colours based on RAL. Please note all colours are made to order only. Glazing:Can be matched to windows and front door designs.Door design style:Steel and timber variations available in a number of special styles and embellishments. Specify left, centre or right hand where appropriate.Operation:- Manual:Black plastic handle.Brushed stainless steel handle.Cast aluminium, brass finish handle.Cast aluminium, bronze finish handle.Cast aluminium, silver finish handle.Cast aluminium, white handle.Polished stainless steel handle.- Electrical: - ProMatic:The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day. Opening speed: 140 mm/s.ProMatic.ProMatic Akku (rechargeable battery powered).ProMatic P. - SupraMatic:The high-quality operator with an array of additional functions for a maximum of 50 door cycles (open/ close) per day. Opening speed: 220 mm/s.SupraMatic E.SupraMatic H.SupraMatic HD.SupraMatic P. - Operator technology generally:868.3 MHz radio frequency with a stable range.Every operator comes with a four button hand transmitter and a micro two button hand transmitter.Integral receiver.Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.On encountering an obstruction, a reliable automatic cut-out stops the door immediately.'Soft' start/ stop saves wear and tear on both the door and operator.Maintenance-free patented toothed belt.Internal emergency release.Easy to install. Everything is precisely prepared.Controls: - Mobile:HS 1 - Hand transmitter, one function.HS 4 - Hand transmitter, four functions.HSD 2-A - Transmission block, aluminium, two functions.HSD 2-C - Transmission block, glossy chrome, two functions.HSE 2 - Micro hand transmitter, two functions.HSM 4 - Mini hand transmitter, four functions.HSP 4 - Hand transmitter, lock-out button, four functions.HSZ 1 - Hand transmitter, car, one function.HSZ 2 - Hand transmitter, car, two function. - Stationary:CTR 1b/3b - Digital coder one/ three functions.ESA - Key switch, surface mount.ESU - Key switch, recess mount.STAP - Key switch, surface mount.STUP - Key switch, recess mount.FCT 10b - Code modulator, ten functions.FCT 3b - Code modulator, three functions.FIT 2 - Internal radio-controlled push-button unit.FL 100 - Fingerscan, 100 prints.FL 100 - Radio fingerscan, 100 prints.FL 12 - Fingerscan, 12 prints.FL 12 - Radio fingerscan, 12 prints.IT 1b - Illuminated button.IT 3b - SupraMatic illuminated button.TTR 100 - Transponder, 100 key.TTR 1000 - Transponder, 1000 key.

Track-guided sectional garage door that fits anywhere and saves space.

Benefits:

  • Space-saving: Sectional doors open vertically upwards and are suspended under the ceiling to save space. This constructional principle means you can make full use of the space inside and in front of the garage for parking.
  • Variable when fitting: The shape of the garage door opening is not of prime importance. Whether square, angled, with segmental or full centred arch – a Hörmann sectional door always fits.
  • Wider passage: Sectional doors with a passage width extended by up to 140 mm can make it much easier to park modern, larger vehicles and SUVs.
  • Sealed all round: Flexible and weather-resistant seals on all four sides of Hörmann’s sectional doors keep out the wind and rain.
  • Additional intermediate seals: Double-skinned doors have additional high-grade intermediate seals between the individual door sections.
  • Bottom seal: With its large-sized profile lip, the bottom seal can easily accommodate slight irregularities in the floor.

Track Versions:-

  • Tension Spring (Z) tracks with tension technology (not for LPU sectional doors) - single doors with Z track tension springs giving low headroom as standard.
  • Normal (N) tracks with torsion spring technology - Double doors with N track torsion springs.
  • Low-headroom (L) tracks with torsion spring technology.

For more track information on these and further track versions consult manufacturer.

Standards:

  • Tested and certified by TÜV in accordance with TTZ directive “Break-in resistance for garage doors”. Doors with wicket doors and doors with glazing are an exception.
  • Performance characteristics according to EN 13241-1. Consult manufacturer's literature for thermal and acoustic insulation values.

More about Sectional Garage Door - Continental Range:
- Options - Further information.

PendingSECTIONAL GARAGE DOOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Sectional Garage Door - Continental Range.
 Type:
[Individual design LTH 40 Hemlock]. - Solid timber.
[Individual design LTH 40 Nordic pine]. - Solid timber.
[L rib LPU 40]. - Double skin (door leaf 42 mm thick); Silkgrain, Micrograin and Decograin Titan Metallic finish.
 Size:
[ ______ ]
 Finish:
[Decograin]. - M and L rib and S panel LPU 40 doors only.
[Micrograin]. - M and L rib LPU 40 door only.
[Silkgrain]. - M and L rib LPU 40 doors only.
 Colour:
[RAL 1015, Light ivory].
[RAL 3003, Ruby red].
[RAL 5003, Sapphire blue].
 Design style:
[ ______ ]
 Glazing:
[Not required].
[Required]. - Creates a thermal break between the frame and the brickwork, improving the insulation by 15%.
 Frame cladding:
[Not required].
[Required, colour as door].
 Thermoframe connection:
[Not required].
[Required]. - Creates a thermal break between the frame and the brickwork, improving the insulation by 15%.
 Track:
[H]. - High-lift tracks.
[L]. - Torsion spring low-headroom.
[N]. - Torsion spring.
 Operation:
[ ______ ]
 Controls:
[ ______ ]
 Accessories:
[None].
[Double-leaf door fittings].
[LED illumination].


top ^

Guidance

for Sectional Garage Door - Continental Range

from Hörmann (UK) Ltd

More about Sectional Garage Door - Continental Range: - Options - Further information.

Options

Size (w x h):

- Standard:

  • 2250 x 1875, 2000 and 2125 mm.
  • 2375 x 1875, 2000, 2125 and 2250 mm.
  • 2500 x 1875, 2000, 2125, 2250, 2375 and 2500 mm. 2500 x 2750 mm only with track application N.
  • 2625 x 2125 mm.
  • 2750 x 2000, 2125, 2250, 2375 and 2500 mm. 2750 x 2750 only with track application N.
  • 3000 x 2000, 2125, 2250, 2375 and 2500 mm.

- Modernisation sizes:

  • 2190 x 1955 and 2080 mm.
  • 2315 x 1955, 2080 and 2205 mm.
  • 2440 x 1955, 2080 and 2205 mm.
  • 2940 x 2080 mm.
  • 2500 x 2750 mm.
  • 2750 x 2750 mm.
  • 3000 x 3000 mm.
  • 3250 x 2000, 2125 and 2250 mm.
  • 3500 x 2000, 2125 and 2250 mm.
  • 3750 x 2000, 2125 and 2250 mm.
  • 4000 x 2000, 2125 and 2250 mm.
  • 4250 x 2000, 2125 and 2250 mm.
  • 4500 x 2000, 2125 and 2250 mm.
  • 4750 x 2000, 2125 and 2250 mm.
  • 5000 x 2000, 2125 and 2250 mm.
  • 5500 x 2000, 2125 and 2250 mm.
  • 6000 x 2000, 2125 and 2250 mm.
  • 6500 x 2000, 2125 and 2250 mm.

Finish:

- Decograin:

UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber.

- Micrograin:

With its delicately lined profile, the new Micrograin surface complements the elegance of modern architecture.

- Silkgrain:

Silky-smooth elegant surface finish.

- Woodgrain:

Robust woodgrain structured surface with authentic sawn timber look.

- Solid timber:

Nordic pine or hemlock, boarded, panelled or individual design.

- Colour:

Single and double skin steel door leaves are galvanized and available in Traffic white as standard. Double-skinned garage doors additionally available in 15 factory colours, as well as about 200 colours based on RAL. Please note all colours are made to order only.

Glazing:

Can be matched to windows and front door designs.

Door design style:

Steel and timber variations available in a number of special styles and embellishments. Specify left, centre or right hand where appropriate.

Operation:

- Manual:

  • Black plastic handle.
  • Brushed stainless steel handle.
  • Cast aluminium, brass finish handle.
  • Cast aluminium, bronze finish handle.
  • Cast aluminium, silver finish handle.
  • Cast aluminium, white handle.
  • Polished stainless steel handle.

- Electrical:

- ProMatic:

  • The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day. Opening speed: 140 mm/s.
  • ProMatic.
  • ProMatic Akku (rechargeable battery powered).
  • ProMatic P.

- SupraMatic:

  • The high-quality operator with an array of additional functions for a maximum of 50 door cycles (open/ close) per day. Opening speed: 220 mm/s.
  • SupraMatic E.
  • SupraMatic H.
  • SupraMatic HD.
  • SupraMatic P.

- Operator technology generally:

  • 868.3 MHz radio frequency with a stable range.
  • Every operator comes with a four button hand transmitter and a micro two button hand transmitter.
  • Integral receiver.
  • Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.
  • On encountering an obstruction, a reliable automatic cut-out stops the door immediately.
  • 'Soft' start/ stop saves wear and tear on both the door and operator.
  • Maintenance-free patented toothed belt.
  • Internal emergency release.
  • Easy to install. Everything is precisely prepared.

Controls:

- Mobile:

  • HS 1 - Hand transmitter, one function.
  • HS 4 - Hand transmitter, four functions.
  • HSD 2-A - Transmission block, aluminium, two functions.
  • HSD 2-C - Transmission block, glossy chrome, two functions.
  • HSE 2 - Micro hand transmitter, two functions.
  • HSM 4 - Mini hand transmitter, four functions.
  • HSP 4 - Hand transmitter, lock-out button, four functions.
  • HSZ 1 - Hand transmitter, car, one function.
  • HSZ 2 - Hand transmitter, car, two function.

- Stationary:

  • CTR 1b/3b - Digital coder one/ three functions.
  • ESA - Key switch, surface mount.
  • ESU - Key switch, recess mount.
  • STAP - Key switch, surface mount.
  • STUP - Key switch, recess mount.
  • FCT 10b - Code modulator, ten functions.
  • FCT 3b - Code modulator, three functions.
  • FIT 2 - Internal radio-controlled push-button unit.
  • FL 100 - Fingerscan, 100 prints.
  • FL 100 - Radio fingerscan, 100 prints.
  • FL 12 - Fingerscan, 12 prints.
  • FL 12 - Radio fingerscan, 12 prints.
  • IT 1b - Illuminated button.
  • IT 3b - SupraMatic illuminated button.
  • TTR 100 - Transponder, 100 key.
  • TTR 1000 - Transponder, 1000 key.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

View larger image of Series 2000 Sectional Garage Doors from Hörmann (UK) LtdSeries 2000 Sectional Garage Door Range

Track-guided automatic sectional garage door that fits anywhere and saves space.Benefits:Space-saving: Sectional doors open vertically upwards and are suspended under the ceiling to save space. This constructional principle means you can make full use of the space inside and in front of the garage for parking.Variable when fitting: The shape of the garage door opening is not of prime importance. Whether square, angled, with segmental or full centred arch – a Hörmann sectional door always fits.Wider passage: Sectional doors with a passage width extended by up to 140 mm can make it much easier to park modern, larger vehicles and SUVs. Sealed all round: Flexible and weather-resistant seals on all four sides of Hörmann’s sectional doors keep out the wind and rain.Additional intermediate seals: Double-skinned doors have additional high-grade intermediate seals between the individual door sections.Bottom seal: With its large-sized profile lip, the bottom seal can easily accommodate slight irregularities in the floor.Track Versions:Tension Spring (Z) tracks with tension technology (not for LPU sectional doors) - single doors with Z track tension springs giving low headroom as standard.Normal (N) tracks with torsion spring technology - Double doors with N track torsion springs.Low-headroom (L) tracks with torsion spring technology.Snap locking:A sturdy automatic latching spring disc grips round a solid steel bolt to securely retain the door.Size: - Single doors with Z track tension springs (giving low headroom as standard):2083 x 1875 or 2080 mm (6'10" x 6'2" or 6'10").2134 x 2000 or 2125 mm (7'0" x 6'6" or 7'0").2286 x 2000, 2125, 2250, 2375 or 2500 mm (7'6" x 6'6", 7'0", 7'4", 7'9" or 8'2").2438 x 2000, 2125, 2250, 2375 or 2500 mm (8'0" x 6'6", 7'0", 7'4", 7'9" or 8'2").2591 x 2000 or 2125 mm (8'6" x 6'6" or 7'0").2743 x 2000 or 2125 mm (9'0" x 6'6" or 7'0").2896 x 2000 or 2125 mm (9'6" x 6'6" or 7'0").3048 x 2000 or 2125 mm (10'0" x 6'6" or 7'0"). - Double doors with N track torsion springs:3353 x 2000 or 2125 mm (11'0" x 6'6" or 7'0").3658 x 2000 or 2125 mm (12'0" x 6'6" or 7'0").3962 x 2000 or 2125 mm (13'0" x 6'6" or 7'0").4267 x 2000 or 2125 mm (14'0" x 6'6" or 7'0").4420 x 2000 or 2125 mm (14'6" x 6'6" or 7'0").4572 x 2000 or 2125 mm (15'0" x 6'6" or 7'0").4724 x 2000 or 2125 mm (15'6" x 6'6" or 7'0").4877 x 2000 or 2125 mm (16'0" x 6'6" or 7'0"). Finish: - Decograin:UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber. - Micrograin:With its delicately lined profile, the new Micrograin surface complements the elegance of modern architecture. - Silkgrain:Silky-smooth elegant surface finish. - Woodgrain:Robust woodgrain structured surface with authentic sawn timber look. - Colour:Double-skinned garage doors additionally available in 15 factory colours. Please note all colours are made to order only.Glazing:Can be matched to the windows and front door designs.Operation: - ProMatic:The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day.Opening speed: 140 mm/s.ProMatic.ProMatic Akku (rechargeable battery powered).ProMatic P. - SupraMatic:The high-quality operator with an array of additional functions for a maximumof 50 door cycles (open/ close) per day.Opening speed: 220 mm/s.SupraMatic E.SupraMatic H.SupraMatic HD.SupraMatic P. - Operator technology generally:868.3 MHz radio frequency with a stable range.Every operator comes with a four button hand transmitter and a micro two button hand transmitter.Integral receiver.Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.On encountering an obstruction, a reliable automatic cut-out stops the door immediately.'Soft' start/ stop saves wear and tear on both the door and operator.Maintenance-free patented toothed belt.Internal emergency release.Easy to install. Everything is precisely prepared.Controls:- Mobile:HS 1 - Hand transmitter, one function.HS 4 - Hand transmitter, four functions.HSD 2-A - Transmission block, aluminium, two functions.HSD 2-C - Transmission block, glossy chrome, two functions.HSE 2 - Micro hand transmitter, two functions.HSM 4 - Mini hand transmitter, four functions.HSZ 1 - Hand transmitter, car, one function.HSZ 2 - Hand transmitter, car, two function.- Stationary:CTR 1b/3b - Digital coder one/ three functions.ESA - Key switch, surface mount.ESU - Key switch, recess mount.STAP - Key switch, surface mount.STUP - Key switch, recess mount.FCT 10b - Code modulator, ten functions.FCT 3b - Code modulator, three functions.FIT 2 - Internal radio-controlled push-button unit.FL 100 - Fingerscan, 100 prints.FL 100 - Radio fingerscan, 100 prints.FL 12 - Fingerscan, 12 prints.FL 12 - Radio fingerscan, 12 prints.IT 1b - Illuminated button.IT 3b - SupraMatic illuminated button.TTR 100 - Transponder, 100 key.TTR 1000 - Transponder, 1000 key.

Track-guided automatic sectional garage door that fits anywhere and saves space.

Benefits:

  • Space-saving: Sectional doors open vertically upwards and are suspended under the ceiling to save space. This constructional principle means you can make full use of the space inside and in front of the garage for parking.
  • Variable when fitting: The shape of the garage door opening is not of prime importance. Whether square, angled, with segmental or full centred arch – a Hörmann sectional door always fits.
  • Wider passage: Sectional doors with a passage width extended by up to 140 mm can make it much easier to park modern, larger vehicles and SUVs.
  • Sealed all round: Flexible and weather-resistant seals on all four sides of Hörmann’s sectional doors keep out the wind and rain.
  • Additional intermediate seals: Double-skinned doors have additional high-grade intermediate seals between the individual door sections.
  • Bottom seal: With its large-sized profile lip, the bottom seal can easily accommodate slight irregularities in the floor.

Track Versions:

  • Tension Spring (Z) tracks with tension technology (not for LPU sectional doors) - single doors with Z track tension springs giving low headroom as standard.
  • Normal (N) tracks with torsion spring technology - Double doors with N track torsion springs.
  • Low-headroom (L) tracks with torsion spring technology.

More about Series 2000 Sectional Garage Door Range:
As standard - Options - Further information.

PendingGARAGE DOOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Series 2000 Sectional Garage Door Range.
 Type:
[S rib LTE 40]. - Single skin; Woodgrain finish.
[S rib LPU 40]. - Double skin (door leaf 42 mm thick); Woodgrain finish.
[M rib LTE 40]. - Single skin; Woodgrain finish.
 Size:
[ ______ ] - Insert size from Options below.
 Finish:
[Decograin]. - M and L rib and S panel LPU 40 doors only.
[Micrograin]. - M, L rib LPU 40 door only.
[Silkgrain]. - M and L rib LPU 40 doors only.
 Colour:
[Manufacturer's standard]. - All steel doors are supplied as standard in traffic white.
[RAL 7016, Anthracite grey].
[RAL 8003, Clay brown].
 Glazing:
[Not required].
[S0].
[S1].
 Frame cladding:
[Not required].
[Required, colour as door].
 Thermoframe connection:
[Not required].
[Required]. - Creates a thermal break between the frame and the brickwork, improving the insulation by 15%.
 Renovation fascias:
[Not required].
[Required]. - To cover damaged brickwork edges.
 Handle:
[Not required].
[Black plastic].
[Brass cast aluminium].
 Operation:
[ ______ ]
 Controls:
[ ______ ]


top ^

Guidance

for Series 2000 Sectional Garage Door Range

from Hörmann (UK) Ltd

More about Series 2000 Sectional Garage Door Range: As standard - Options - Further information.

As standard

Snap locking:

A sturdy automatic latching spring disc grips round a solid steel bolt to securely retain the door.

Options

Size:

- Single doors with Z track tension springs (giving low headroom as standard):

  • 2083 x 1875 or 2080 mm (6'10" x 6'2" or 6'10").
  • 2134 x 2000 or 2125 mm (7'0" x 6'6" or 7'0").
  • 2286 x 2000, 2125, 2250, 2375 or 2500 mm (7'6" x 6'6", 7'0", 7'4", 7'9" or 8'2").
  • 2438 x 2000, 2125, 2250, 2375 or 2500 mm (8'0" x 6'6", 7'0", 7'4", 7'9" or 8'2").
  • 2591 x 2000 or 2125 mm (8'6" x 6'6" or 7'0").
  • 2743 x 2000 or 2125 mm (9'0" x 6'6" or 7'0").
  • 2896 x 2000 or 2125 mm (9'6" x 6'6" or 7'0").
  • 3048 x 2000 or 2125 mm (10'0" x 6'6" or 7'0").

- Double doors with N track torsion springs:

  • 3353 x 2000 or 2125 mm (11'0" x 6'6" or 7'0").
  • 3658 x 2000 or 2125 mm (12'0" x 6'6" or 7'0").
  • 3962 x 2000 or 2125 mm (13'0" x 6'6" or 7'0").
  • 4267 x 2000 or 2125 mm (14'0" x 6'6" or 7'0").
  • 4420 x 2000 or 2125 mm (14'6" x 6'6" or 7'0").
  • 4572 x 2000 or 2125 mm (15'0" x 6'6" or 7'0").
  • 4724 x 2000 or 2125 mm (15'6" x 6'6" or 7'0").
  • 4877 x 2000 or 2125 mm (16'0" x 6'6" or 7'0").

Finish:

- Decograin:

UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber.

- Micrograin:

With its delicately lined profile, the new Micrograin surface complements the elegance of modern architecture.

- Silkgrain:

Silky-smooth elegant surface finish.

- Woodgrain:

Robust woodgrain structured surface with authentic sawn timber look.

- Colour:

Double-skinned garage doors additionally available in 15 factory colours. Please note all colours are made to order only.

Glazing:

Can be matched to the windows and front door designs.

Operation:

- ProMatic:

  • The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day.
  • Opening speed: 140 mm/s.
  • ProMatic.
  • ProMatic Akku (rechargeable battery powered).
  • ProMatic P.

- SupraMatic:

  • The high-quality operator with an array of additional functions for a maximumof 50 door cycles (open/ close) per day.
  • Opening speed: 220 mm/s.
  • SupraMatic E.
  • SupraMatic H.
  • SupraMatic HD.
  • SupraMatic P.

- Operator technology generally:

  • 868.3 MHz radio frequency with a stable range.
  • Every operator comes with a four button hand transmitter and a micro two button hand transmitter.
  • Integral receiver.
  • Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.
  • On encountering an obstruction, a reliable automatic cut-out stops the door immediately.
  • 'Soft' start/ stop saves wear and tear on both the door and operator.
  • Maintenance-free patented toothed belt.
  • Internal emergency release.
  • Easy to install. Everything is precisely prepared.

Controls:

- Mobile:

  • HS 1 - Hand transmitter, one function.
  • HS 4 - Hand transmitter, four functions.
  • HSD 2-A - Transmission block, aluminium, two functions.
  • HSD 2-C - Transmission block, glossy chrome, two functions.
  • HSE 2 - Micro hand transmitter, two functions.
  • HSM 4 - Mini hand transmitter, four functions.
  • HSZ 1 - Hand transmitter, car, one function.
  • HSZ 2 - Hand transmitter, car, two function.

- Stationary:

  • CTR 1b/3b - Digital coder one/ three functions.
  • ESA - Key switch, surface mount.
  • ESU - Key switch, recess mount.
  • STAP - Key switch, surface mount.
  • STUP - Key switch, recess mount.
  • FCT 10b - Code modulator, ten functions.
  • FCT 3b - Code modulator, three functions.
  • FIT 2 - Internal radio-controlled push-button unit.
  • FL 100 - Fingerscan, 100 prints.
  • FL 100 - Radio fingerscan, 100 prints.
  • FL 12 - Fingerscan, 12 prints.
  • FL 12 - Radio fingerscan, 12 prints.
  • IT 1b - Illuminated button.
  • IT 3b - SupraMatic illuminated button.
  • TTR 100 - Transponder, 100 key.
  • TTR 1000 - Transponder, 1000 key.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

View larger image of Side Sliding Sectional Door from Hörmann (UK) LtdSide Sliding Sectional Door

Side sliding sectional garage door available in manual or automatic operation. It gives smooth, quiet door travel and precise door guiding and is available in various finish, colour and hardware options.Features:Automatic wicket door function.Double automatic safety cut-out.Finger trap protection inside and outside.Rounded floor rail.Twin rollers.Size (w x h, maximum):6500 x 3000 mm.Panels:42 mm thick polyurethane foamed sandwich panels offer excellent acoustic and thermal insulation and increase door stability.Precise door travel:Twin rollers made of wear-resistant plastic move reliably and precisely on the aluminium rail and prevent the door sections from jumping out. They also make the door move quietly and easily, making it a breeze to operate the door by hand as well. Stable connecting hinges on the rollers and between the panels ensure good door leaf stability.Seals:Flexible and weather-resistant seals on the sides and in the lintel area of the door frame keep out the wind and rain. The side seal optimally fills the door gap with a large-sized profile lip. Seals between the individual sections and at the bottom edge also provide for good door sealing.Locking:The bottom and top door guide close the door precisely. Two additional hooks on the side of the door firmly connect the end of the door leaf with the side frame. This mechanical lock is also practical for preventing the door from being forced open. To improve break-in resistance, doors can be optionally equipped with three-point locking at the closing edge.Floor rail:The aluminium floor rail reliably guides the door sections and prevents the sections from swivelling out. A flat design of only 25 mm makes it easy to drive in and out. It is easy to clean out dirt and leaves from the rail as it is open on the ends.Double automatic safety cut-out:The reliable automatic safety cut-out is active during both the opening and the closing cycle of the door. The door stops immediately if there is an obstacle in the opening zone or in the wall guide. This prevents injuries and damage to vehicles or property.Finish:Decograin: UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber.Silkgrain: Silky-smooth elegant surface finish.Woodgrain: Robust woodgrain structured surface with authentic sawn timber look.Operation: - ProMatic:Opening speed (approximate): 8–10 mm/second.Pull and push force: 600 N.Peak force: 750 N.Door width: Up to 3000 mm.Includes two, two-button hand transmitters HSE 2 BS (black).Double automatic safety cut-out in the open and close direction.Adjustable wicket door opening available. - SupraMatic:Opening speed (approximate): 12–18 mm/second.Pull and push force: 650 N.Peak force: 800 N.Door width: Up to 6500 mm.Includes five-button hand transmitter HS 5 BS (black) and a two-button hand transmitter HSE 2 BS (black).Low power consumption in standby of less than one watt.Extremely easy programming by entering a two-digit number.Separately switchable halogen lighting.Double automatic safety cut-out in the open and close direction.Adjustable wicket door opening available.Controls:- Mobile:HS 1 BS: Hand transmitter, one function.HS 4 BS: Hand transmitter, four functions.HS 5 BS: Hand transmitter, four functions with inquiry button.HSE 2 BS: Micro hand transmitter, two functions.HSD 2-A BS: Transmission block, aluminium, two functions.HSD 2-C BS: Transmission block, glossy chrome, two functions.HSP 4: Mini hand transmitter, four functions.HSZ 1 BS: Hand transmitter, car, one function.HSZ 2 BS: Hand transmitter, car, two functions. - Stationary:FCT 3 BS: Code modulator, three functions.FCT 10 BS: Code modulator, ten functions.FFL 12 BS: Radio fingerscan, 12 prints.Key switch: One function.

Side sliding sectional garage door available in manual or automatic operation. It gives smooth, quiet door travel and precise door guiding and is available in various finish, colour and hardware options.

Features:

  • Automatic wicket door function.
  • Double automatic safety cut-out.
  • Finger trap protection inside and outside.
  • Rounded floor rail.
  • Twin rollers.

More about Side Sliding Sectional Door:
As standard - Options - Further information.

PendingSECTIONAL GARAGE DOOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Side Sliding Sectional Door.
 Type:
[L-ribbed].
[M-ribbed].
[Panelled].
 Size:
[ ______ ] - Insert requirement.
 Finish:
[Decograin, Golden oak]. - Not available with L-ribbed.
[Silkgrain]. - Not available with Panelled.
[Woodgrain].
 Colour:
[Not applicable – For Decograin, Golden oak.].
[RAL 9016, Traffic white – Standard.].
[RAL 7016, Anthracite grey].
 Operation:
[Manual].
[ProMatic].
[SupraMatic].
 Track:
[ES]. - Single track.
[DS]. - Double track, for tight side room; below 450 mm.
 Handle:
[Not required].
[Plastic, RAL 9006, White aluminium]. - Standard.
[Cast aluminium, brass].
 Automatic wicket door function:
[Not required].
[Required].
 Locking:
[Side hooks]. - Standard.
[Three point].
 Controls:
[ ______ ] - Insert requirement from 'Options' below.


top ^

Guidance

for Side Sliding Sectional Door

from Hörmann (UK) Ltd

More about Side Sliding Sectional Door: As standard - Options - Further information.

As standard

Size (w x h, maximum):

6500 x 3000 mm.

Panels:

42 mm thick polyurethane foamed sandwich panels offer excellent acoustic and thermal insulation and increase door stability.

Precise door travel:

Twin rollers made of wear-resistant plastic move reliably and precisely on the aluminium rail and prevent the door sections from jumping out. They also make the door move quietly and easily, making it a breeze to operate the door by hand as well. Stable connecting hinges on the rollers and between the panels ensure good door leaf stability.

Seals:

Flexible and weather-resistant seals on the sides and in the lintel area of the door frame keep out the wind and rain. The side seal optimally fills the door gap with a large-sized profile lip. Seals between the individual sections and at the bottom edge also provide for good door sealing.

Locking:

The bottom and top door guide close the door precisely. Two additional hooks on the side of the door firmly connect the end of the door leaf with the side frame. This mechanical lock is also practical for preventing the door from being forced open. To improve break-in resistance, doors can be optionally equipped with three-point locking at the closing edge.

Floor rail:

The aluminium floor rail reliably guides the door sections and prevents the sections from swivelling out. A flat design of only 25 mm makes it easy to drive in and out. It is easy to clean out dirt and leaves from the rail as it is open on the ends.

Double automatic safety cut-out:

The reliable automatic safety cut-out is active during both the opening and the closing cycle of the door. The door stops immediately if there is an obstacle in the opening zone or in the wall guide. This prevents injuries and damage to vehicles or property.

Options

Finish:

  • Decograin: UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber.
  • Silkgrain: Silky-smooth elegant surface finish.
  • Woodgrain: Robust woodgrain structured surface with authentic sawn timber look.

Operation:

- ProMatic:

  • Opening speed (approximate): 8–10 mm/second.
  • Pull and push force: 600 N.
  • Peak force: 750 N.
  • Door width: Up to 3000 mm.
  • Includes two, two-button hand transmitters HSE 2 BS (black).
  • Double automatic safety cut-out in the open and close direction.
  • Adjustable wicket door opening available.

- SupraMatic:

  • Opening speed (approximate): 12–18 mm/second.
  • Pull and push force: 650 N.
  • Peak force: 800 N.
  • Door width: Up to 6500 mm.
  • Includes five-button hand transmitter HS 5 BS (black) and a two-button hand transmitter HSE 2 BS (black).
  • Low power consumption in standby of less than one watt.
  • Extremely easy programming by entering a two-digit number.
  • Separately switchable halogen lighting.
  • Double automatic safety cut-out in the open and close direction.
  • Adjustable wicket door opening available.

Controls:

- Mobile:

  • HS 1 BS: Hand transmitter, one function.
  • HS 4 BS: Hand transmitter, four functions.
  • HS 5 BS: Hand transmitter, four functions with inquiry button.
  • HSE 2 BS: Micro hand transmitter, two functions.
  • HSD 2-A BS: Transmission block, aluminium, two functions.
  • HSD 2-C BS: Transmission block, glossy chrome, two functions.
  • HSP 4: Mini hand transmitter, four functions.
  • HSZ 1 BS: Hand transmitter, car, one function.
  • HSZ 2 BS: Hand transmitter, car, two functions.

- Stationary:

  • FCT 3 BS: Code modulator, three functions.
  • FCT 10 BS: Code modulator, ten functions.
  • FFL 12 BS: Radio fingerscan, 12 prints.
  • Key switch: One function.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

View larger image of Up-and-Over Garage Doors from Hörmann (UK) LtdContinental Up and Over Garage Door Range

Up-and-Over garage door.Safety:Doors incorporate reliable safeguards to eliminate trap zones and prevent the door leaf from crashing to the floor.Size (w x h): - Standard for single garages:2250 x 1920, 2000, 2075 or 2125 mm.2375 x 1920, 2000, 2075, 2125, 2250 or 2375 mm.2500 x 1920, 2000, 2075, 2125, 2250, 2375, 2500 or 2750 mm.2625 x 2125 mm.2750 x 2000 or 2125 mm.3000 x 2000 or 2125 mm. - Standard for double garages:4000 x 2000 or 2125 mm.4500 x 2000, 2125 or 2250 mm. 5000 x 2000 or 2125 mm.Finish: - Decograin:UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber. Available with panelled styles: 971, 973, 975 and 977, 984 and 985. - Solid timber:Nordic pine or hemlock, boarded or individual design. - Colour:Steel door leaves are galvanized and available in Traffic white as standard, in 15 equally-priced preferred colours, as well as about 200 colours based on RAL. Please note all colours are made to order only.Glazing:Can be matched to windows and front door designs.Door design style:Available in a number of special styles and embellishments. Specify left, centre or right hand where appropriate.Operation:- Manual:Black plastic handle.Brushed stainless steel handle.Cast aluminium, brass finish handle.Cast aluminium, brown finish handle.Cast aluminium, silver handleCast aluminium, white handle.Polished stainless steel handle.- Electrical: - ProMatic:The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day. Opening speed: 140 mm/s.ProMatic.ProMatic Akku (rechargeable battery powered).ProMatic P. - SupraMatic:The high-quality operator with an array of additional functions for a maximum of 50 door cycles (open/ close) per day. Opening speed: 220 mm/s.SupraMatic E.SupraMatic H.SupraMatic HD.SupraMatic P.- Operator technology generally:868.3 MHz radio frequency with a stable range.Every operator comes with a four button hand transmitter and a micro two button hand transmitter.Integral receiver.Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.On encountering an obstruction, a reliable automatic cut-out stops the door immediately.'Soft' start/ stop saves wear and tear on both the door and operator.Maintenance-free patented toothed belt.Internal emergency release.Easy to install. Everything is precisely prepared.Controls: - Mobile:HS 1 - Hand transmitter, one function.HS 4 - Hand transmitter, four functions.HSD 2-A - Transmission block, aluminium, two functions.HSD 2-C - Transmission block, glossy chrome, two functions.HSE 2 - Micro hand transmitter, two functions.HSM 4 - Mini hand transmitter, four functions.HSP 4 - Hand transmitter, lock-out button, four functions.HSZ 1 - Hand transmitter, car, one function.HSZ 2 - Hand transmitter, car, two function.- Stationary:CTR 1b/3b - Digital coder one/ three functions.ESA - Key switch, surface mount.ESU - Key switch, recess mount.STAP - Key switch, surface mount.STUP - Key switch, recess mount.FCT 10b - Code modulator, ten functions.FCT 3b - Code modulator, three functions.FIT 2 - Internal radio-controlled push-button unit.FL 100 - Fingerscan, 100 prints.FL 100 - Radio fingerscan, 100 prints.FL 12 - Fingerscan, 12 prints.FL 12 - Radio fingerscan, 12 prints.IT 1b - Illuminated button.IT 3b - SupraMatic illuminated button.TTR 100 - Transponder, 100 key.TTR 1000 - Transponder, 1000 key.

Up-and-Over garage door.

More about Continental Up and Over Garage Door Range:
As standard - Options - Further information.

PendingUP-AND-OVER GARAGE DOOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Continental Up and Over Garage Door Range.
 Type:
[Door leaf frame]. - On-site infill.
[Hemlock overlapping frame].
[Hemlock within frame].
 Size:
[ ______ ]
 Steel door colour:
[Not required].
[RAL 1015, Light ivory].
[RAL 3003, Ruby red].
 Timber door colour:
[Not required].
[Dove blue].
[Fir green].
 Design style:
[ ______ ]
 Glazing:
[ ______ ]
 Frame cladding:
[Not required].
[Required, colour as door].
 Track:
[DF 98]. - Double garages.
[N80]. - Single garages.
 Operation:
[ ______ ]
 Controls:
[ ______ ]
 Accessories:
[None].
[Double-leaf door fittings].
[LED illumination].


top ^

Guidance

for Continental Up and Over Garage Door Range

from Hörmann (UK) Ltd

More about Continental Up and Over Garage Door Range: As standard - Options - Further information.

As standard

Safety:

Doors incorporate reliable safeguards to eliminate trap zones and prevent the door leaf from crashing to the floor.

Options

Size (w x h):

- Standard for single garages:

  • 2250 x 1920, 2000, 2075 or 2125 mm.
  • 2375 x 1920, 2000, 2075, 2125, 2250 or 2375 mm.
  • 2500 x 1920, 2000, 2075, 2125, 2250, 2375, 2500 or 2750 mm.
  • 2625 x 2125 mm.
  • 2750 x 2000 or 2125 mm.
  • 3000 x 2000 or 2125 mm.

- Standard for double garages:

  • 4000 x 2000 or 2125 mm.
  • 4500 x 2000, 2125 or 2250 mm.
  • 5000 x 2000 or 2125 mm.

Finish:

- Decograin:

UV-resistant synthetic foil coating with unique embossed graining conveying the authentic character of timber. Available with panelled styles: 971, 973, 975 and 977, 984 and 985.

- Solid timber:

Nordic pine or hemlock, boarded or individual design.

- Colour:

Steel door leaves are galvanized and available in Traffic white as standard, in 15 equally-priced preferred colours, as well as about 200 colours based on RAL. Please note all colours are made to order only.

Glazing:

Can be matched to windows and front door designs.

Door design style:

Available in a number of special styles and embellishments. Specify left, centre or right hand where appropriate.

Operation:

- Manual:

  • Black plastic handle.
  • Brushed stainless steel handle.
  • Cast aluminium, brass finish handle.
  • Cast aluminium, brown finish handle.
  • Cast aluminium, silver handle
  • Cast aluminium, white handle.
  • Polished stainless steel handle.

- Electrical:

- ProMatic:

  • The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day. Opening speed: 140 mm/s.
  • ProMatic.
  • ProMatic Akku (rechargeable battery powered).
  • ProMatic P.

- SupraMatic:

  • The high-quality operator with an array of additional functions for a maximum of 50 door cycles (open/ close) per day. Opening speed: 220 mm/s.
  • SupraMatic E.
  • SupraMatic H.
  • SupraMatic HD.
  • SupraMatic P.

- Operator technology generally:

  • 868.3 MHz radio frequency with a stable range.
  • Every operator comes with a four button hand transmitter and a micro two button hand transmitter.
  • Integral receiver.
  • Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.
  • On encountering an obstruction, a reliable automatic cut-out stops the door immediately.
  • 'Soft' start/ stop saves wear and tear on both the door and operator.
  • Maintenance-free patented toothed belt.
  • Internal emergency release.
  • Easy to install. Everything is precisely prepared.

Controls:

- Mobile:

  • HS 1 - Hand transmitter, one function.
  • HS 4 - Hand transmitter, four functions.
  • HSD 2-A - Transmission block, aluminium, two functions.
  • HSD 2-C - Transmission block, glossy chrome, two functions.
  • HSE 2 - Micro hand transmitter, two functions.
  • HSM 4 - Mini hand transmitter, four functions.
  • HSP 4 - Hand transmitter, lock-out button, four functions.
  • HSZ 1 - Hand transmitter, car, one function.
  • HSZ 2 - Hand transmitter, car, two function.

- Stationary:

  • CTR 1b/3b - Digital coder one/ three functions.
  • ESA - Key switch, surface mount.
  • ESU - Key switch, recess mount.
  • STAP - Key switch, surface mount.
  • STUP - Key switch, recess mount.
  • FCT 10b - Code modulator, ten functions.
  • FCT 3b - Code modulator, three functions.
  • FIT 2 - Internal radio-controlled push-button unit.
  • FL 100 - Fingerscan, 100 prints.
  • FL 100 - Radio fingerscan, 100 prints.
  • FL 12 - Fingerscan, 12 prints.
  • FL 12 - Radio fingerscan, 12 prints.
  • IT 1b - Illuminated button.
  • IT 3b - SupraMatic illuminated button.
  • TTR 100 - Transponder, 100 key.
  • TTR 1000 - Transponder, 1000 key.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

View larger image of Series 2000 Double Up-And-Over Door from Hörmann (UK) LtdSeries 2000 Up and Over Garage Door Range

Features a larger, stiffer 80 mm steel chassis construction which means the max infill weight is now increased to 10 kg/m². It resists twisting even in extra large sizes and matches the horizontal bracing.Available in steel, timber and GRP designs.Design style:Not all sizes are available in all designs. Consult manufacturer for further details. Available in a number of special styles and embellishments. Specify left, centre or right hand where appropriate.Garage door:- Steel:2001 Vertical.2002 Horizontal.2003 Chevron.2004 Georgian.2011 Open for infill - Maximum infill weight is 10 kg/m².2101 Ilkley.2104 Marquess.2304 Georgian Windows. - Timber:2005 Measham.2007 Jacobean.2008 Tudor.2009 Vertical.2009 Horizontal.2010 Chevron.2013 Caxton.2014 Rutland.2019 Garage Light.2020 Gatcombe.2109 Mallory.2114 Shepshed.2119 Leicester. - GRP:2047 Bourton.2048 Burford.2049 Moreton.2050 Woodstock.Windermere.Coniston.Penshurst.Hartfield.Stamford.Livingston.Side doors:- Steel:2001 Vertical - also in Decograin finish.2002 Horizontal - also in Decograin finish.2003 Chevron.2004 Georgian - also in Decograin finish.2304 Georgian with windows.2104 Marquess - also in Decograin finish. - Timber:2005 Meashem.2007 Jacobean.2008 Tudor.2014 Rutland.2009 Vertical or Horizontal.2109 Mallory.2013 Caxton.2020 Gatcombe.2114 Shepshed.2019 Garage Light.Size:- Garage doors:1981 x 1981 and 2134 mm (6’6” x 6’6” and 7'0").2083 x 1930, 1981 and 2134 mm (6’10” x 6’4”, 6'6" and 7'0").2134 x 1930, 1981, 2134 and 2286 mm (7’0” x 6’4”, 6'6", 7'0" and 7'6").2210 x 1930, 1981 and 2134 mm (7’3” x 6’4”, 6'6" and 7'0").2261 x 1981 and 2134 mm (7’5” x 6’6” and 7'0").2286 x 1930, 1981, 2134 and 2286 mm (7’6” x 6’4", 6'6", 7'0" and 7'6").2337 x 1930, 1981, 2134, 2286 and 2438 mm (7’8” x 6’4”, 6'6", 7'0", 7'6" and 8'0").2590 x 1981 and 2134 mm (8’6” x 6’6” and 7'0").2743 x 1981 and 2134 mm (9’0” x 6’6” and 7'0").3048 x 1981 and 2134 mm (10’0” x 6’6” and 7'0").3353 x 1981 and 2134 mm (11’0” x 6’6” and 7'0").3658 x 1981 and 2134 mm (12’0” x 6’6” and 7'0").3962 x 1981 and 2134 mm (13’0” x 6’6” and 7'0").4267 x 1981 and 2134 mm (14’0” x 6’6” and 7'0"). - 75 mm steel framed doors:2135 x 2044 and 2199 mm (7’0” x 6’8½” and 7'2¾").2235 x 1994, 2044 and 2199 mm (7’4” x 6’6½”, 6'8½" and 7'2¾").2284 x 1994, 2044, 2199 and 2350 mm (7’6” x 6’6½”, 6'8½", 7'2¾" and 7'8½").2365 x 1994, 2044 and 2199 mm (7’9¼” x 6’6½”, 6'8½" and 7'2¾").2411 x 2044 and 2199 mm (7’11” x 6’8½” and 7'2¾").2436 x 1994, 2044, 2199 and 2350 mm (8’0” x 6’6½”, 6'8½", 7'2¾" and 7'8¾").2489 x 1994 mm (8’2” x 6’6½”).2589 x 1994, 2044, 2199, 2350 and 2503 mm (8’6” x 6’6½”, 6'8½", 7'2¾", 7'8½" and 8'2¾").2741 x 2044 and 2199 mm (9’0” x 6’8½” and 7'2¾").2894 x 2044 and 2199 mm (9’6” x 6’8½” and 7'2¾").3199 x 2044 and 2199 mm (10’6” x 6’8½” and 7'2¾").3504 x 2044 and 2199 mm (11’6” x 6’8½” and 7'2¾").3809 x 2044 and 2199 mm (12’6” x 6’8½” and 7'2¾").4114 x 2044 and 2199 mm (13’6” x 6’8½” and 7'2¾").4419 x 2044 and 2199 mm (14’6” x 6’8½” and 7'2¾").- Side doors:875 x 1875 mm.875 x 2000 mm.875 x 2125 mm.1000 x 2000 mm.1000 x 2125 mm.Colour:Some options are restricted - contact manufacturer for door styles/ sizes available in each colour. Mahogany, Walnut, Dark Oak, Medium Oak, Light Oak, Teak, Ebony, Rosewood and Golden Oak are fully finished options for timber doors only. With five year erosion protection.Glazing:Can be matched to windows and front door designs. Not available in all design styles: consult manufacturer for details.Operation:- Manual:Black plastic handle.Brushed stainless steel handle.Cast aluminium, brass finish handle.Cast aluminium, brown finish handle.Cast aluminium, silver handle.Cast aluminium, white handle.Polished stainless steel handle.- Electrical:- ProMatic:The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day. Opening speed: 140 mm/s.ProMatic.ProMatic Akku (rechargeable battery powered).ProMatic P. - SupraMatic:The high-quality operator with an array of additional functions for a maximum of 50 door cycles (open/ close) per day. Opening speed: 220 mm/s.SupraMatic E.SupraMatic H.SupraMatic HD.SupraMatic P.- Operator technology generally:868.3 MHz radio frequency with a stable range.Every operator comes with a four button hand transmitter and a micro two button hand transmitter.Integral receiver.Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.On encountering an obstruction, a reliable automatic cut-out stops the door immediately.'Soft' start/ stop saves wear and tear on both the door and operator.Maintenance-free patented toothed belt.Internal emergency release.Easy to install. Everything is precisely prepared.Controls:- Mobile:HS 1 - Hand transmitter, one function.HS 4 - Hand transmitter, four functions.HSD 2-A - Transmission block, aluminium, two functions.HSD 2-C - Transmission block, glossy chrome, two functions.HSE 2 - Micro hand transmitter, two functions.HSM 4 - Mini hand transmitter, four functions.HSP 4 - Hand transmitter, lock-out button, four functions.HSZ 1 - Hand transmitter, car, one function.HSZ 2 - Hand transmitter, car, two function.- Stationary:CTR 1b/3b - Digital coder one/ three functions.ESA - Key switch, surface mount.ESU - Key switch, recess mount.STAP - Key switch, surface mount.STUP - Key switch, recess mount.FCT 10b - Code modulator, ten functions.FCT 3b - Code modulator, three functions.FIT 2 - Internal radio-controlled push-button unit.FL 100 - Fingerscan, 100 prints.FL 100 - Radio fingerscan, 100 prints.FL 12 - Fingerscan, 12 prints.FL 12 - Radio fingerscan, 12 prints.IT 1b - Illuminated button.IT 3b - SupraMatic illuminated button.TTR 100 - Transponder, 100 key.TTR 1000 - Transponder, 1000 key.

Features a larger, stiffer 80 mm steel chassis construction which means the max infill weight is now increased to 10 kg/m². It resists twisting even in extra large sizes and matches the horizontal bracing.

Available in steel, timber and GRP designs.

More about Series 2000 Up and Over Garage Door Range:
- Options - Further information.

PendingDOUBLE UP-AND-OVER GARAGE DOOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
Series 2000 Up and Over Garage Door Range.
 Design style:
[ ______ ]
 Gear:
[Canopy].
[Retractable].
[Retractable Plus].
 Fixing frame:
[60 mm].
[75 mm].
[Four point locking kit]. - Single door sizes only.
 Size:
  -Garage door:
[ ______ ] - Insert size from Options below.
  -Side door:
[ ______ ] - Insert size from Options below.
 Glazing:
[Not required].
[Crossed].
[Diamond].
 Frame cladding:
[Not required].
[Required, colour as door].
 Colour/ Finish:
  -Garage door:
[As standard]. - RAL 9016, White. Steel doors only.
[RAL 3003, Red]. - Steel doors only.
[RAL 5005, Light Blue]. - Steel doors only.
  -Side door:
[ ______ ] - Insert colour as required from above, or 'As garage door'.
 Handle:
[Not required].
[Black plastic].
[Brass cast aluminium].
 Track:
[DF 98]. - Double garages.
[N80]. - Single garages.
 Operation:
[ ______ ]
 Controls:
[ ______ ]
 Accessories:
[None].
[Double-leaf door fittings].
[LED illumination].


top ^

Guidance

for Series 2000 Up and Over Garage Door Range

from Hörmann (UK) Ltd

More about Series 2000 Up and Over Garage Door Range: - Options - Further information.

Options

Design style:

Not all sizes are available in all designs. Consult manufacturer for further details. Available in a number of special styles and embellishments. Specify left, centre or right hand where appropriate.

Garage door:

- Steel:

  • 2001 Vertical.
  • 2002 Horizontal.
  • 2003 Chevron.
  • 2004 Georgian.
  • 2011 Open for infill - Maximum infill weight is 10 kg/m².
  • 2101 Ilkley.
  • 2104 Marquess.
  • 2304 Georgian Windows.

- Timber:

  • 2005 Measham.
  • 2007 Jacobean.
  • 2008 Tudor.
  • 2009 Vertical.
  • 2009 Horizontal.
  • 2010 Chevron.
  • 2013 Caxton.
  • 2014 Rutland.
  • 2019 Garage Light.
  • 2020 Gatcombe.
  • 2109 Mallory.
  • 2114 Shepshed.
  • 2119 Leicester.

- GRP:

  • 2047 Bourton.
  • 2048 Burford.
  • 2049 Moreton.
  • 2050 Woodstock.
  • Windermere.
  • Coniston.
  • Penshurst.
  • Hartfield.
  • Stamford.
  • Livingston.

Side doors:

- Steel:

  • 2001 Vertical - also in Decograin finish.
  • 2002 Horizontal - also in Decograin finish.
  • 2003 Chevron.
  • 2004 Georgian - also in Decograin finish.
  • 2304 Georgian with windows.
  • 2104 Marquess - also in Decograin finish.

- Timber:

  • 2005 Meashem.
  • 2007 Jacobean.
  • 2008 Tudor.
  • 2014 Rutland.
  • 2009 Vertical or Horizontal.
  • 2109 Mallory.
  • 2013 Caxton.
  • 2020 Gatcombe.
  • 2114 Shepshed.
  • 2019 Garage Light.

Size:

- Garage doors:

  • 1981 x 1981 and 2134 mm (6’6” x 6’6” and 7'0").
  • 2083 x 1930, 1981 and 2134 mm (6’10” x 6’4”, 6'6" and 7'0").
  • 2134 x 1930, 1981, 2134 and 2286 mm (7’0” x 6’4”, 6'6", 7'0" and 7'6").
  • 2210 x 1930, 1981 and 2134 mm (7’3” x 6’4”, 6'6" and 7'0").
  • 2261 x 1981 and 2134 mm (7’5” x 6’6” and 7'0").
  • 2286 x 1930, 1981, 2134 and 2286 mm (7’6” x 6’4", 6'6", 7'0" and 7'6").
  • 2337 x 1930, 1981, 2134, 2286 and 2438 mm (7’8” x 6’4”, 6'6", 7'0", 7'6" and 8'0").

  • 2590 x 1981 and 2134 mm (8’6” x 6’6” and 7'0").
  • 2743 x 1981 and 2134 mm (9’0” x 6’6” and 7'0").
  • 3048 x 1981 and 2134 mm (10’0” x 6’6” and 7'0").
  • 3353 x 1981 and 2134 mm (11’0” x 6’6” and 7'0").
  • 3658 x 1981 and 2134 mm (12’0” x 6’6” and 7'0").
  • 3962 x 1981 and 2134 mm (13’0” x 6’6” and 7'0").
  • 4267 x 1981 and 2134 mm (14’0” x 6’6” and 7'0").

- 75 mm steel framed doors:

  • 2135 x 2044 and 2199 mm (7’0” x 6’8½” and 7'2¾").
  • 2235 x 1994, 2044 and 2199 mm (7’4” x 6’6½”, 6'8½" and 7'2¾").
  • 2284 x 1994, 2044, 2199 and 2350 mm (7’6” x 6’6½”, 6'8½", 7'2¾" and 7'8½").
  • 2365 x 1994, 2044 and 2199 mm (7’9¼” x 6’6½”, 6'8½" and 7'2¾").
  • 2411 x 2044 and 2199 mm (7’11” x 6’8½” and 7'2¾").
  • 2436 x 1994, 2044, 2199 and 2350 mm (8’0” x 6’6½”, 6'8½", 7'2¾" and 7'8¾").
  • 2489 x 1994 mm (8’2” x 6’6½”).
  • 2589 x 1994, 2044, 2199, 2350 and 2503 mm (8’6” x 6’6½”, 6'8½", 7'2¾", 7'8½" and 8'2¾").
  • 2741 x 2044 and 2199 mm (9’0” x 6’8½” and 7'2¾").
  • 2894 x 2044 and 2199 mm (9’6” x 6’8½” and 7'2¾").
  • 3199 x 2044 and 2199 mm (10’6” x 6’8½” and 7'2¾").
  • 3504 x 2044 and 2199 mm (11’6” x 6’8½” and 7'2¾").
  • 3809 x 2044 and 2199 mm (12’6” x 6’8½” and 7'2¾").
  • 4114 x 2044 and 2199 mm (13’6” x 6’8½” and 7'2¾").
  • 4419 x 2044 and 2199 mm (14’6” x 6’8½” and 7'2¾").

- Side doors:

  • 875 x 1875 mm.
  • 875 x 2000 mm.
  • 875 x 2125 mm.
  • 1000 x 2000 mm.
  • 1000 x 2125 mm.

Colour:

Some options are restricted - contact manufacturer for door styles/ sizes available in each colour. Mahogany, Walnut, Dark Oak, Medium Oak, Light Oak, Teak, Ebony, Rosewood and Golden Oak are fully finished options for timber doors only. With five year erosion protection.

Glazing:

Can be matched to windows and front door designs. Not available in all design styles: consult manufacturer for details.

Operation:

- Manual:

  • Black plastic handle.
  • Brushed stainless steel handle.
  • Cast aluminium, brass finish handle.
  • Cast aluminium, brown finish handle.
  • Cast aluminium, silver handle.
  • Cast aluminium, white handle.
  • Polished stainless steel handle.

- Electrical:

- ProMatic:

  • The inexpensive starter model as an introduction to the Hörmann premium quality, for a maximum of 10 door cycles (open/ close) per day. Opening speed: 140 mm/s.
  • ProMatic.
  • ProMatic Akku (rechargeable battery powered).
  • ProMatic P.

- SupraMatic:

  • The high-quality operator with an array of additional functions for a maximum of 50 door cycles (open/ close) per day. Opening speed: 220 mm/s.
  • SupraMatic E.
  • SupraMatic H.
  • SupraMatic HD.
  • SupraMatic P.

- Operator technology generally:

  • 868.3 MHz radio frequency with a stable range.
  • Every operator comes with a four button hand transmitter and a micro two button hand transmitter.
  • Integral receiver.
  • Automatic door latching affords effective protection against forced opening. A unique mechanical device that remains functional even in the event of a power failure.
  • On encountering an obstruction, a reliable automatic cut-out stops the door immediately.
  • 'Soft' start/ stop saves wear and tear on both the door and operator.
  • Maintenance-free patented toothed belt.
  • Internal emergency release.
  • Easy to install. Everything is precisely prepared.

Controls:

- Mobile:

  • HS 1 - Hand transmitter, one function.
  • HS 4 - Hand transmitter, four functions.
  • HSD 2-A - Transmission block, aluminium, two functions.
  • HSD 2-C - Transmission block, glossy chrome, two functions.
  • HSE 2 - Micro hand transmitter, two functions.
  • HSM 4 - Mini hand transmitter, four functions.
  • HSP 4 - Hand transmitter, lock-out button, four functions.
  • HSZ 1 - Hand transmitter, car, one function.
  • HSZ 2 - Hand transmitter, car, two function.

- Stationary:

CTR 1b/3b - Digital coder one/ three functions.

ESA - Key switch, surface mount.

ESU - Key switch, recess mount.

STAP - Key switch, surface mount.

STUP - Key switch, recess mount.

FCT 10b - Code modulator, ten functions.

FCT 3b - Code modulator, three functions.

FIT 2 - Internal radio-controlled push-button unit.

FL 100 - Fingerscan, 100 prints.

FL 100 - Radio fingerscan, 100 prints.

FL 12 - Fingerscan, 12 prints.

FL 12 - Radio fingerscan, 12 prints.

IT 1b - Illuminated button.

IT 3b - SupraMatic illuminated button.

TTR 100 - Transponder, 100 key.

TTR 1000 - Transponder, 1000 key.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

View larger image of RollMatic Roller Garage Door from Hörmann (UK) LtdRollMatic Roller Garage Door

The RollMatic garage door is made of high-quality corrosion-free aluminium, which allows parking close to the front of the garage; the inside ceiling area of the garage remains available. The RollMatic door is equipped, as standard, with state-of-the-art Hörmann operator technology.Features:Barrel casing as standard.Integrated mechanical door security kit.Minimum fitting effort.Storm anchors as standard equipment.Tension spring technology with patented multi-spring system.Standard:BS EN 13241-1.Dimensions:Width: (minimum/ maximum): 1000/ 5000 mm.Height: (minimum/ maximum): 1900/ 3000 mm.See manufacturer's size range chart for permitted combinations of heights, widths and headroom requirements.Wind pressure (to BS EN 12424):3500 mm door width (maximum): Class 5.4500 mm door width (maximum): Class 4.5000 mm door width (maximum): Class 3.Shutter curtain:Double-skinned thermally insulated lath.Face material: Smooth surface aluminium profile.Core material: 100% CFC-free polyurethane rigid foam.Operation:The operator is located outside of the barrel casing for trouble-free maintenance. Start and stop of the RollMatic door are particularly soft and quiet. The spring compensation and automatic cut-out, render an additional closing edge safety device unnecessary. An internal push button and light are integrated in the control housing.The built-in automatic safety cut-out secures the closing edge and immediately stops the door if there is an obstacle.Emergency release is via a pull cord as standard equipment and the door can be easily pushed open after actuation; no crank handle is required.Colour:RollMatic roller garage doors are delivered in Traffic white as standard; in addition there are eight preferred colours available without a surcharge. Two Decograin surfaces in Golden Oak and Rosewood Mahogany are also available.Glazed elements:The glazed elements allow daylight to enter the garage. A maximum of ten profiles with glazing elements can be used for each door.

The RollMatic garage door is made of high-quality corrosion-free aluminium, which allows parking close to the front of the garage; the inside ceiling area of the garage remains available. The RollMatic door is equipped, as standard, with state-of-the-art Hörmann operator technology.

Features:

  • Barrel casing as standard.
  • Integrated mechanical door security kit.
  • Minimum fitting effort.
  • Storm anchors as standard equipment.
  • Tension spring technology with patented multi-spring system.

Standard:

BS EN 13241-1.

More about RollMatic Roller Garage Door:
As standard - Options - Further information.

PendingROLLER GARAGE DOOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
RollMatic Roller Garage Door.
 Size (w x h):
[??? x ??? mm].
[As drawing ???].
 Arrangement:
[Behind the opening].
[Between openings].
 Colour:
[RAL 9016 Traffic white]. - Manufacturer's standard.
[RAL 3003 Ruby red].
[RAL 5011 Steel blue].
 Control:
[Hand transmitter HS 1]. - One function.
[Hand transmitter HS 4]. - Four functions.
[Hand transmitter HSD 2-A]. - Aluminium look for two functions, with button lock-out.
 Other requirements:
[None].
[Acoustic alarm].
[Chamfered bottom profile]. - Compensates for slopes of up to 300 mm.


top ^

Guidance

for RollMatic Roller Garage Door

from Hörmann (UK) Ltd

More about RollMatic Roller Garage Door: As standard - Options - Further information.

As standard

Dimensions:

  • Width: (minimum/ maximum): 1000/ 5000 mm.
  • Height: (minimum/ maximum): 1900/ 3000 mm.
  • See manufacturer's size range chart for permitted combinations of heights, widths and headroom requirements.

Wind pressure (to BS EN 12424):

  • 3500 mm door width (maximum): Class 5.
  • 4500 mm door width (maximum): Class 4.
  • 5000 mm door width (maximum): Class 3.

Shutter curtain:

  • Double-skinned thermally insulated lath.
  • Face material: Smooth surface aluminium profile.
  • Core material: 100% CFC-free polyurethane rigid foam.

Operation:

  • The operator is located outside of the barrel casing for trouble-free maintenance. Start and stop of the RollMatic door are particularly soft and quiet. The spring compensation and automatic cut-out, render an additional closing edge safety device unnecessary. An internal push button and light are integrated in the control housing.
  • The built-in automatic safety cut-out secures the closing edge and immediately stops the door if there is an obstacle.
  • Emergency release is via a pull cord as standard equipment and the door can be easily pushed open after actuation; no crank handle is required.

Options

Colour:

RollMatic roller garage doors are delivered in Traffic white as standard; in addition there are eight preferred colours available without a surcharge. Two Decograin surfaces in Golden Oak and Rosewood Mahogany are also available.

Glazed elements:

The glazed elements allow daylight to enter the garage. A maximum of ten profiles with glazing elements can be used for each door.

Further Information

Literature:

RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 

ET500 Garage Door

Type ET 500 up and over garage door is a maintenance free, cost-effective garage door, available with a choice of operator and a range of infill panel designs to choose from. The doors require limited headroom and can be supplied with an optional subframe for fitting situations without a lintel or side room. Alternative options include a wicket door and side door. Galvanized door leaves are powder coated in RAL 9006; alternative RAL colours are available on request. The doors are operated by a system of double cables and counter-weight technology for safety, low wear and permanent reliability.Surface finish:Door leaf: Galvanized and primed RAL 9006 Grey White.Type:ET 500 L (light version): Available up to 4250 mm wide x 2500 mm high.ET 500 S (heavy version): Available up to 6000 mm wide x 2500 mm high.Infill: - Design 400:On-site infill inside the frame.Enables integration of the door to surrounding façade designs.Door width (maximum): 6000 mm. - Design 405:On-site infill overlapping the frame. Enables integration of the door to surrounding façade designs.Door width (maximum): 6000 mm. - Design 412:Round perforated steel sheet.Ventilation cross section: 45% of the infill surface.Door width (maximum): 6000 mm. - Design 413:Rectangular perforated steel sheet.Ventilation cross section: 45% of the infill surface.Door width (maximum): 6000 mm. - Design 420:Smooth aluminium sheet fixed inside the frame.Sheet thickness: 2.0 mm.Door width (maximum): 6000 mm. - Design 480:Variable sectional design: 42 mm thick. Matches Hormann section doors.Available with aluminium frame with expanded mesh, perforated sheet or glazing infill.Door width (maximum): 5000 mm.Operator: - ITO400:For over 50 parking spaces.Chain driven.Emergency release via a Bowden cable.Operator and control IP65 rated.Settings via control panel on a separate control.Roll up safety device.Door and side closing edge safety device.Photocell.Additional control units available on request (activating kit for warning light, traffic control, handsets). - ITO400FU:For over 50 parking spaces.Chain driven.'Soft' start and stop for gentle quiet door travel.Emergency release via a Bowden cable.Operator and control IP65 rated.Settings via control panel on a separate control.Roll up safety device.Door and side closing edge safety device.Photocell.Additional control units available on request (activating kit for warning light, traffic control, handsets). - SupraMatic HFor up to 50 parking spaces.Utilises a toothed belt.Emergency release from the inside.'Soft' start and 'soft' stop for gentle quiet door travel.Patented door locking in the operator boom.Settings directly on operator via the operating panel.Includes photocell.Integrated lighting with two minute light, set at the factory.Additional control units available on request (activating kit for warning light, traffic control, handsets).Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL99544.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=03905&f=COL420393.pdf&pg=

Type ET 500 up and over garage door is a maintenance free, cost-effective garage door, available with a choice of operator and a range of infill panel designs to choose from. The doors require limited headroom and can be supplied with an optional subframe for fitting situations without a lintel or side room. Alternative options include a wicket door and side door. Galvanized door leaves are powder coated in RAL 9006; alternative RAL colours are available on request. The doors are operated by a system of double cables and counter-weight technology for safety, low wear and permanent reliability.

More about ET500 Garage Door:
As standard - Options - Further information.

PendingUP AND OVER GARAGE DOOR:
 Manufacturer:
Hörmann (UK) Ltd.
  -Web:www.hormann.co.uk.
  -Tel:+44 (0)1530 513050.
  -Product reference:
ET500 Garage Door.
 Type:
[ET 500 L]. - Light duty version.
[ET 500 S]. - Heavy duty version.
 Size:
[As drawing ???].
[As schedule ???].
 Frame:
[Aluminium].
[Galvanized steel].
 Infill:
[Design 400].
[Design 405].
[Design 412].
 Finish:
[Manufacturer's standard].
[As schedule ???]. - Alternative RAL colours are available on request.
 Operator:
[ITO400].
[ITO400FU].
[SupraMatic H].
 Other requirements:
[None].
[Side door].
[Subframe].


top ^

Guidance

for ET500 Garage Door

from Hörmann (UK) Ltd

More about ET500 Garage Door: As standard - Options - Further information.

As standard

Surface finish:

Door leaf: Galvanized and primed RAL 9006 Grey White.

Options

Type:

  • ET 500 L (light version): Available up to 4250 mm wide x 2500 mm high.
  • ET 500 S (heavy version): Available up to 6000 mm wide x 2500 mm high.

Infill:

- Design 400:

  • On-site infill inside the frame.
  • Enables integration of the door to surrounding façade designs.
  • Door width (maximum): 6000 mm.

- Design 405:

  • On-site infill overlapping the frame.
  • Enables integration of the door to surrounding façade designs.
  • Door width (maximum): 6000 mm.

- Design 412:

  • Round perforated steel sheet.
  • Ventilation cross section: 45% of the infill surface.
  • Door width (maximum): 6000 mm.

- Design 413:

  • Rectangular perforated steel sheet.
  • Ventilation cross section: 45% of the infill surface.
  • Door width (maximum): 6000 mm.

- Design 420:

  • Smooth aluminium sheet fixed inside the frame.
  • Sheet thickness: 2.0 mm.
  • Door width (maximum): 6000 mm.

- Design 480:

  • Variable sectional design: 42 mm thick.
  • Matches Hormann section doors.
  • Available with aluminium frame with expanded mesh, perforated sheet or glazing infill.
  • Door width (maximum): 5000 mm.

Operator:

- ITO400:

  • For over 50 parking spaces.
  • Chain driven.
  • Emergency release via a Bowden cable.
  • Operator and control IP65 rated.
  • Settings via control panel on a separate control.
  • Roll up safety device.
  • Door and side closing edge safety device.
  • Photocell.
  • Additional control units available on request (activating kit for warning light, traffic control, handsets).

- ITO400FU:

  • For over 50 parking spaces.
  • Chain driven.
  • 'Soft' start and stop for gentle quiet door travel.
  • Emergency release via a Bowden cable.
  • Operator and control IP65 rated.
  • Settings via control panel on a separate control.
  • Roll up safety device.
  • Door and side closing edge safety device.
  • Photocell.
  • Additional control units available on request (activating kit for warning light, traffic control, handsets).

- SupraMatic H

  • For up to 50 parking spaces.
  • Utilises a toothed belt.
  • Emergency release from the inside.
  • 'Soft' start and 'soft' stop for gentle quiet door travel.
  • Patented door locking in the operator boom.
  • Settings directly on operator via the operating panel.
  • Includes photocell.
  • Integrated lighting with two minute light, set at the factory.
  • Additional control units available on request (activating kit for warning light, traffic control, handsets).

Further Information

Literature:



RIBA CPD

CPD information is available for Hörmann (UK) Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Hörmann (UK) Ltd from ribaproductselector.com.

Contacts:

www.hormann.co.uk

info@hormann.co.uk

T: +44 (0)1530 513050

F: +44 (0)1530 513001

top ^

 
Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 12 December 2017