A-Z Manufacturers (HAG - The Door Specialists ) |  CAWS Index (L20 610)
HAG - The Door Specialists

HAG - The Door Specialists

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

1 Oak Lane, Fishponds, Bristol. BS5 7UY

RIBA Product Selector
NBS National BIM Library

This NBS Plus page covers roller shutters/ curtains, roller shutter, fire shutter, fire curtain, smoke curtain, insulated roller shutter, built on roller shutters, roller shutter personnel door and steel closure

relating to clause 610 ROLLER SHUTTERS/ CURTAINS

in L20 Doors/ shutters/ hatches.

For more NBS Plus information from this company, see the HAG - The Door Specialists overview page which includes a clause list and a product list.


Products from HAG - The Door Specialists

HAG Shutters and Grilles Ltd offers a design and specification service; consultation early in the design process is recommended

Select to expand
Roller shutters (31)
Select to expand
Roller shutter personnel door (2)
 

View larger image of Roller Shutter Alishield F3 from HAG - The Door Specialists Roller Shutter Alishield F3

50 mm flat single skin aluminium lath for domestic and commercial applications in areas requiring medium security. Arrangement: Vertical operation.Shutter curtain:52 x 1.5 mm flat single skin aluminium lath.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL717203.pdf&pg=3

50 mm flat single skin aluminium lath for domestic and commercial applications in areas requiring medium security.

More about Roller Shutter Alishield F3:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Alishield Type F3 Roller shutter.
 Shutter curtain:
  -Type:
52 mm x 1.5 mm flat single skin aluminium lath.
  -Finish:
[Mill finish]. - Standard factory finish.
[Anodized]. - Optional factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frames/ guides:
  -Type:
[38 x 29 x 3 mm aluminium]. - For standard frame.
[50 x 50 mm box section aluminium]. - For electrical operation.
  -Finish:
[Mill finish]. - Standard factory finish.
[Anodized]. - Optional factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Alishield F3

from HAG - The Door Specialists

More about Roller Shutter Alishield F3: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

52 x 1.5 mm flat single skin aluminium lath.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Alishield F6 Heavy Duty from HAG - The Door Specialists Roller Shutter Alishield F6 Heavy Duty

Heavy-duty 89 mm flat solid single skin aluminium laths, for domestic and commercial applications areas requiring medium security. Arrangement: Vertical operation.Shutter curtain:87 x 1.5 mm flat solid single skin aluminium lath.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL717203.pdf&pg=3

Heavy-duty 89 mm flat solid single skin aluminium laths, for domestic and commercial applications areas requiring medium security.

More about Roller Shutter Alishield F6 Heavy Duty:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Alishield Type F6 Heavy duty roller shutter.
 Shutter curtain:
  -Type:
87 mm x 1.5 mm flat solid single skin aluminium lath.
  -Finish:
[Mill finish]. - Standard factory finish.
[Anodized]. - Optional factory finish.
[Polyester powder coated]. - Optional factory finishes.
 Frames/ guides:
  -Type:
[75 x 38 x 3 mm aluminium with brush seals]. - For standard frame.
[50 x 50 mm galvanized steel box section]. - For electrically operated shutters.
[76 x 50 mm galvanized steel box section]. - For shutters over 200 kg.
  -Finish:
[Mill finish]. - Standard factory finish.
[Anodized]. - Optional factory finish.
[Polyester powder coated]. - Optional factory finishes.
 Operation:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Alishield F6 Heavy Duty

from HAG - The Door Specialists

More about Roller Shutter Alishield F6 Heavy Duty: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

87 x 1.5 mm flat solid single skin aluminium lath.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Alishield N1 from HAG - The Door Specialists Roller Shutter Alishield N1

50 mm flat punched single skin aluminium laths, with 125 x 25 mm apertures - for commercial applications in areas requiring medium security and where vision is required. Arrangement: Vertical operation.Shutter curtain:52 x 1.5 mm flat punched single skin aluminium lath with 125 x 25 mm vision apertures.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL717203.pdf&pg=3

50 mm flat punched single skin aluminium laths, with 125 x 25 mm apertures - for commercial applications in areas requiring medium security and where vision is required.

More about Roller Shutter Alishield N1:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
RollerShutterAlishieldN1.
 Shutter curtain:
  -Type:
52 x 1.5 mm flat punched single skin aluminium lath with 125 x 25 mm vision apertures.
  -Finish:
[Mill finish]. - Standard factory finish.
[Anodized]. - Optional factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frames/ guides:
  -Type:
[75 x 38 x 3 mm aluminium with brush seals]. - For standard frame.
[50 x 50 mm galvanized steel box section]. - For electrically operated shutters.
  -Finish:
[Mill finish]. - Standard factory finish.
[Anodized]. - Optional factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Alishield N1

from HAG - The Door Specialists

More about Roller Shutter Alishield N1: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

52 x 1.5 mm flat punched single skin aluminium lath with 125 x 25 mm vision apertures.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Alishield F3 from HAG - The Door Specialists Roller Shutter Alishield F3

50 mm flat single skin aluminium lath for domestic and commercial applications in areas requiring medium security. Arrangement: Vertical operation.Shutter curtain:52 x 1.5 mm flat single skin aluminium lath.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL717203.pdf&pg=3

50 mm flat single skin aluminium lath for domestic and commercial applications in areas requiring medium security.

More about Roller Shutter Alishield F3:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Alishield Type F3 Roller shutter.
 Shutter curtain:
  -Type:
52 mm x 1.5 mm flat single skin aluminium lath.
  -Finish:
[Mill finish]. - Standard factory finish.
[Anodized]. - Optional factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frames/ guides:
  -Type:
[38 x 29 x 3 mm aluminium]. - For standard frame.
[50 x 50 mm box section aluminium]. - For electrical operation.
  -Finish:
[Mill finish]. - Standard factory finish.
[Anodized]. - Optional factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Alishield F3

from HAG - The Door Specialists

More about Roller Shutter Alishield F3: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

52 x 1.5 mm flat single skin aluminium lath.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard C1 from HAG - The Door Specialists Roller Shutter Armourguard C1

76 mm curved solid 22 gauge laths with galvanized bright finish - for commercial and industrial high security applications. Arrangement: Vertical operation.Shutter curtain:76 x 0.71 mm curved solid 22 gauge steel lath.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL1317203.pdf&pg=

76 mm curved solid 22 gauge laths with galvanized bright finish - for commercial and industrial high security applications.

More about Roller Shutter Armourguard C1:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Type C1 Roller shutter.
 Shutter curtain:
  -Type:
76 x 0.71 mm curved solid 22 gauge steel lath.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frames/ guides:
  -Type:
[50 x 32 x 3 mm]. - For standard frame up to 3000 mm width.
[63 x 32 x 3 mm]. - For standard frame up to 5000 mm width.
[100 x 32 x 3 mm]. - For standard frame up to 7000 mm width.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Single phase electrical].
[Spring loaded manual].
[Three phase electrical].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Armourguard C1

from HAG - The Door Specialists

More about Roller Shutter Armourguard C1: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

76 x 0.71 mm curved solid 22 gauge steel lath.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

BIM Objects:

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard C2 from HAG - The Door Specialists Roller Shutter Armourguard C2

76 mm curved solid 22 gauge laths, galvanized and with HP200 Plastisol colour coated finish externally and corrosion resistant finish internally - for commercial and industrial high security applications.HP200 is Corus roofing and cladding steel with a 2000 micrometre (nominal thickness) high-performance Plastisol coating on a Galvatite hot dip zinc coated substrate to BS EN 10146. The standard reverse side coating is a specially formulated two-coat protective system of corrosion resistant primer topped with a heat cured, high-performance polyester, suitable for most internal environments.Arrangement: Vertical operation.Shutter curtain:76 x 0.71 mm curved solid 22 gauge steel lath.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL1317203.pdf&pg=

76 mm curved solid 22 gauge laths, galvanized and with HP200 Plastisol colour coated finish externally and corrosion resistant finish internally - for commercial and industrial high security applications.

HP200 is Corus roofing and cladding steel with a 2000 micrometre (nominal thickness) high-performance Plastisol coating on a Galvatite hot dip zinc coated substrate to BS EN 10146.

The standard reverse side coating is a specially formulated two-coat protective system of corrosion resistant primer topped with a heat cured, high-performance polyester, suitable for most internal environments.

More about Roller Shutter Armourguard C2:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Roller Shutter Armourguard C2.
 Shutter curtain:
  -Type:
76 x 0.71 mm curved solid 22 gauge steel lath.
  -Finish:
HP200 Plastisol Colour Coating with corrosion resistant finish to reverse side.
 Frames/ guides:
  -Type:
[50 x 32 x 3 mm]. - For standard frame up to 3000 mm width.
[63 x 32 x 3 mm]. - For standard frame up to 5000 mm width.
[100 x 32 x 3 mm]. - For standard frame up to 7000 mm width.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Single phase electrical].
[Spring loaded manual].
[Three phase electrical].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Armourguard C2

from HAG - The Door Specialists

More about Roller Shutter Armourguard C2: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

76 x 0.71 mm curved solid 22 gauge steel lath.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

BIM Objects:

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard F1 from HAG - The Door Specialists Roller Shutter Armourguard F1

100 mm twin skinned 22 gauge galvanized steel lath with foam insulation - for commercial and industrial applications. Arrangement: Vertical operation.Shutter curtain:100 x 27 mm twin skinned steel 22 gauge lath with foam insulation.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Frame/ guides: 90 x 32 x 3 mm.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL1317203.pdf&pg=

100 mm twin skinned 22 gauge galvanized steel lath with foam insulation - for commercial and industrial applications.

More about Roller Shutter Armourguard F1:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Type F1 Roller shutter.
 Shutter curtain:
  -Type:
100 mm x 27 mm twin skinned steel 22 gauge lath with foam insulation.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frame/ Guides:
  -Type:
90 mm x 32 mm x 3 mm.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Hand chain manual].
[Three phase electrical].


top ^

Guidance

for Roller Shutter Armourguard F1

from HAG - The Door Specialists

More about Roller Shutter Armourguard F1: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

100 x 27 mm twin skinned steel 22 gauge lath with foam insulation.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Frame/ guides:

90 x 32 x 3 mm.

Further Information

BIM Objects:

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard F2 from HAG - The Door Specialists Roller Shutter Armourguard F2

100 mm twin skinned 22 gauge galvanized steel lath with foam insulation and designed - for high security commercial and industrial applications.HP200 Plastisol colour coated finish to outside and inside face where required. HP200 is Corus roofing and cladding steel with a 2000 micron (nominal thickness) high-performance Plastisol coating on a Galvatite hot dip zinc coated substrate to BS EN 10146. The standard reverse side coating is a specially formulated two-coat protective system of corrosion resistant primer topped with a heat cured, high-performance polyester, suitable for most internal environments.Arrangement: Vertical operation.Shutter curtain:100 x 27 mm twin skinned steel 22 gauge lath with foam insulation.Shutter curtain finish:HP200 Plastisol Colour coating with corrosion resistant finish to reverse side.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Frame/ guides: 90 x 32 x 3 mm.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL1317203.pdf&pg=

100 mm twin skinned 22 gauge galvanized steel lath with foam insulation and designed - for high security commercial and industrial applications.

HP200 Plastisol colour coated finish to outside and inside face where required.

HP200 is Corus roofing and cladding steel with a 2000 micron (nominal thickness) high-performance Plastisol coating on a Galvatite hot dip zinc coated substrate to BS EN 10146. The standard reverse side coating is a specially formulated two-coat protective system of corrosion resistant primer topped with a heat cured, high-performance polyester, suitable for most internal environments.

More about Roller Shutter Armourguard F2:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Type F2 Roller shutter.
 Shutter curtain:
  -Type:
100 mm x 27 mm Twin skinned steel 22 gauge lath with foam insulation.
  -Finish:
HP200 Plastisol Colour coating with corrosion resistant finish to reverse side.
 Frame/ Guides:
  -Type:
90 mm x 32 mm x 3 mm.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Hand chain manual].
[Three phase electrical].


top ^

Guidance

for Roller Shutter Armourguard F2

from HAG - The Door Specialists

More about Roller Shutter Armourguard F2: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

100 x 27 mm twin skinned steel 22 gauge lath with foam insulation.

Shutter curtain finish:

HP200 Plastisol Colour coating with corrosion resistant finish to reverse side.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Frame/ guides:

90 x 32 x 3 mm.

Further Information

BIM Objects:

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard F4 from HAG - The Door Specialists Roller Shutter Armourguard F4

50 mm flat solid 20 gauge galvanized steel laths - medium to high security in domestic and commercial applications. Arrangement: Vertical operation.Shutter curtain:50 x 0.71 mm flat solid steel 22 gauge lath.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL1317203.pdf&pg=

50 mm flat solid 20 gauge galvanized steel laths - medium to high security in domestic and commercial applications.

More about Roller Shutter Armourguard F4:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Type F4 Roller shutter.
 Shutter curtain:
  -Type:
50 mm x 0.71 mm flat solid steel 22 gauge lath.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frame/ guides:
  -Type:
[50 x 32 x 3 mm]. - For standard frame up to 3000 mm width.
[50 x 50 mm galvanized steel box section]. - For electrically operated shutters.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Armourguard F4

from HAG - The Door Specialists

More about Roller Shutter Armourguard F4: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

50 x 0.71 mm flat solid steel 22 gauge lath.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard N2M from HAG - The Door Specialists Roller Shutter Armourguard N2M

76 mm curved solid 20 gauge galvanized steel lath with 75 x 45 x 12 mm pitch apertures in a choice of ‘brick bond’ or ‘in-line’ patterns and designed for commercial applications where high vision and/ or ventilation is a requirement. Arrangement: Vertical operation.Shutter curtain:76 x 0.71 mm curved solid steel 22 gauge lath with 75 x 45 x 12 mm pitch apertures.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL1317203.pdf&pg=

76 mm curved solid 20 gauge galvanized steel lath with 75 x 45 x 12 mm pitch apertures in a choice of ‘brick bond’ or ‘in-line’ patterns and designed for commercial applications where high vision and/ or ventilation is a requirement.

More about Roller Shutter Armourguard N2M:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Type N2 Maximum Roller shutter.
 Shutter curtain:
7 6mm x 0.71 mm curved solid 22 gauge lath with 15 0mm x 50 mm x 45 mm pitch apertures.
  -Pattern:
[Brick bond].
[Inline].
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frame/ guides:
  -Type:
[50 x 32 x 3 mm]. - For standard frame up to 3000 mm width.
[63 x 32 x 3 mm]. - For standard frame up to 5000 mm width.
[50 x 50 mm galvanized steel box section]. - For electrically operated shutters.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Single phase electrical].
[Spring loaded manual].
[Three phase electrical].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Armourguard N2M

from HAG - The Door Specialists

More about Roller Shutter Armourguard N2M: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

76 x 0.71 mm curved solid steel 22 gauge lath with 75 x 45 x 12 mm pitch apertures.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

BIM Objects:

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard N2 from HAG - The Door Specialists Roller Shutter Armourguard N2

76 mm curved solid 22 gauge galvanized steel lath with 150 x 50 x 45 mm pitch apertures in a choice of ‘brick bond’ or ‘in-line’ patterns and designed for commercial applications where high vision and/ or ventilation is a requirement. Arrangement: Vertical operation.Shutter curtain:76 x 0.71 mm curved solid steel 22 gauge lath with 150 x 50 x 45 mm pitch apertures.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL1317203.pdf&pg=

76 mm curved solid 22 gauge galvanized steel lath with 150 x 50 x 45 mm pitch apertures in a choice of ‘brick bond’ or ‘in-line’ patterns and designed for commercial applications where high vision and/ or ventilation is a requirement.

More about Roller Shutter Armourguard N2:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Type N2 Standard roller shutter.
 Shutter curtain:
  -Type:
76 mm x 0.71 mm curved solid 22 gauge lath with 150 mm x 50 mm x 45 mm pitch apertures.
  -Pattern:
[Brick bond].
[Inline].
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frame/ guides:
  -Type:
[50 x 32 x 3 mm]. - For standard frame up to 3000 mm width.
[63 x 32 x 3 mm]. - For standard frame up to 5000 mm width.
[50 x 50 mm galvanized steel box section]. - For electrically operated shutters.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Single phase electrical].
[Spring loaded manual].
[Three phase electrical].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Armourguard N2

from HAG - The Door Specialists

More about Roller Shutter Armourguard N2: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

76 x 0.71 mm curved solid steel 22 gauge lath with 150 x 50 x 45 mm pitch apertures.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard P1 from HAG - The Door Specialists Roller Shutter Armourguard P1

50 mm flat solid 20 gauge galvanized steel laths, with 3 mm perforations providing 30% vision - for commercial applications where vision and/ or ventilation is a requirement. Arrangement: Vertical operation.Shutter curtain:50 x 0.91 mm curved solid 20 gauge lath.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL1317203.pdf&pg=

50 mm flat solid 20 gauge galvanized steel laths, with 3 mm perforations providing 30% vision - for commercial applications where vision and/ or ventilation is a requirement.

More about Roller Shutter Armourguard P1:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Type P1 Roller shutter.
 Shutter curtain:
  -Type:
50 mm x 0.91 mm curved solid steel 20 gauge lath.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frames/ guides:
  -Type:
[38 x 29 x 3 mm]. - For standard frame.
[50 x 50 mm box section]. - For electrically operated shutters.
  -Finish:
[Mill finish]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
  -Type:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Armourguard P1

from HAG - The Door Specialists

More about Roller Shutter Armourguard P1: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

50 x 0.91 mm curved solid 20 gauge lath.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard P2 from HAG - The Door Specialists Roller Shutter Armourguard P2

76 mm curved solid 20 gauge galvanized steel laths, with 3 mm perforations providing 50% vision - for commercial applications where vision and/ or ventilation is a requirement. Arrangement: Vertical operation.Shutter curtain:76 x 0.91 mm curved solid steel 20 gauge lath.Shutter box:0.91 mm bright spangle galvanized pressed steel coil casing.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL1317203.pdf&pg=

76 mm curved solid 20 gauge galvanized steel laths, with 3 mm perforations providing 50% vision - for commercial applications where vision and/ or ventilation is a requirement.

More about Roller Shutter Armourguard P2:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Type P2 Roller shutter.
 Shutter curtain:
  -Type:
50 mm x 0.91 mm curved solid steel 20 gauge lath.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frames/ guides:
  -Types:
[50 x 32 x 3 mm]. - For standard frame up to 3000 mm width.
[63 x 32 x 3 mm]. - For standard frame up to 5000 mm width.
[100 x 32 x 3 mm]. - For standard frame up to 7000 mm width.
  -Finish:
[Galvanized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Armourguard P2

from HAG - The Door Specialists

More about Roller Shutter Armourguard P2: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

76 x 0.91 mm curved solid steel 20 gauge lath.

Shutter box:

0.91 mm bright spangle galvanized pressed steel coil casing.

Further Information

BIM Objects:

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Armourguard SR3 from HAG - The Door Specialists SR3 Roller Shutter Armourguard

90 mm twin-skin extruded aluminium roller shutter, certified to LPS 1175 issue 7 SR3 to provide a high security barrier. Designed for high-security commercial and industrial applications. Can be fixed to steel, masonry, hardwood or fire-boarded softwood.Manufactured in accordance with BS EN 12489 and BS EN 12426.Applications:Retail outlets.Banks.Airports.Warranty:One year.Arrangement:Vertical operation.Frame and guides profile:90 x 40 mm.Head box:300 x 300 mm (up to 4 m); 400 x 400 mm (over 4 m).Material:Shutter curtain: 90 mm twin-skin extruded aluminium curved roller shutter.Bottom rail: Extruded aluminium.Operation:Automatic.Controls:Security key switch.Colour/ Finish:Any standard RAL or BS 4800 colour available, applicable to head box, guides and bottom rail.Fixing:Face or reveal fixing to steel, masonry, hardwood or fire-boarded softwood.

90 mm twin-skin extruded aluminium roller shutter, certified to LPS 1175 issue 7 SR3 to provide a high security barrier. Designed for high-security commercial and industrial applications. Can be fixed to steel, masonry, hardwood or fire-boarded softwood.

Manufactured in accordance with BS EN 12489 and BS EN 12426.

Applications:

  • Retail outlets.
  • Banks.
  • Airports.

Warranty:

One year.

More about SR3 Roller Shutter Armourguard:
As standard - Options - Further information.

PendingROLLER SHUTTER:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Roller Shutter Armourguard SR3.
 Size:
[ ______ ] - 6000 x 5000 mm (maximum) structural opening, consult manufacturer and insert requirements.
 Colour/ Finish:
[Polyester powder-coated, BS 4800]. - Consult manufacturer and insert colour requirements.
[Polyester powder-coated, RAL]. - Consult manufacturer and insert colour requirements.
 Fixing:
[Face].
[Reveal].


top ^

Guidance

for SR3 Roller Shutter Armourguard

from HAG - The Door Specialists

More about SR3 Roller Shutter Armourguard: As standard - Options - Further information.

As standard

Arrangement:

Vertical operation.

Frame and guides profile:

90 x 40 mm.

Head box:

300 x 300 mm (up to 4 m); 400 x 400 mm (over 4 m).

Material:

  • Shutter curtain: 90 mm twin-skin extruded aluminium curved roller shutter.
  • Bottom rail: Extruded aluminium.

Operation:

Automatic.

Controls:

Security key switch.

Options

Colour/ Finish:

Any standard RAL or BS 4800 colour available, applicable to head box, guides and bottom rail.

Fixing:

Face or reveal fixing to steel, masonry, hardwood or fire-boarded softwood.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Hag Ali Glyde Sliding Shutter from HAG - The Door Specialists Sliding and Folding Shutters - Ali Glyde

Suspended from a continuous overhead track, the closures are easily operated single handed, even in very large spans. Gliding smoothly from side to side, either stacking in-line or remotely clear of the entrance. Manufactured from extruded aluminium in various model styles the Ali Glyde can also accommodate special curves to a 356mm radiusModel styles:Consult HAG Shutters & Grilles Ltd technical literature for details. HAG Shutters and Grilles Ltd can also provide a design and specification service and it is recommended that they be consulted early in the design process.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL617203.pdf&pg=4

Suspended from a continuous overhead track, the closures are easily operated single handed, even in very large spans. Gliding smoothly from side to side, either stacking in-line or remotely clear of the entrance. Manufactured from extruded aluminium in various model styles the Ali Glyde can also accommodate special curves to a 356mm radius

More about Sliding and Folding Shutters - Ali Glyde:
- Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Hag Ali Glyde Roller Shutter.
 Performance::
[ ______ ] - Consult with HAG Shutters & Grilles for recommendations and details.
 Arrangement:
[Horizontal operation.].
 Model Styles::
[W10].
[W20].
[W30].
 Standard factory finishes::
[Clear Anodized].
[White Paint].
[Medium Bronze paint].
 Top Track::
[34mm x 42mm aluminium.].
 Operation::
[Manual operation].
 Ironmongery::
[ ______ ] - Consult with HAG Shutters & Grilles for recommendations and details.


top ^

Guidance

for Sliding and Folding Shutters - Ali Glyde

from HAG - The Door Specialists

More about Sliding and Folding Shutters - Ali Glyde: - Options - Further information.

Options

Model styles:

Consult HAG Shutters & Grilles Ltd technical literature for details. HAG Shutters and Grilles Ltd can also provide a design and specification service and it is recommended that they be consulted early in the design process.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Clear Guard from HAG - The Door Specialists Roller Shutter Clear Guard

A heavy-duty roller shutter manufactured from hard coated polycarbonate with interconnecting anodized hinges. designed for commercial applications in areas requiring medium security and where maximum vision is required.Operation:Single phase electrical operationControl:Security Key Switch / Rocker Switch.Alternative controls are available on request.Ironmongery:Consult with HAG Shutters & Grilles for recommendations and details.Box sizes:3200mm overall height – box size 300mm.3650mm overall height – box size 350mm.Guide rails:Standard guide rails 110mm x 38mm x 3mm aluminium with brush seals .Electrical operation:A tubular motor housed within the barrel assembly with limit switches and thermal cut out to prevent overheating.Draw 240 volts and 0.5-3.5 amps dependent on shutter size.Override:The provision of a separate 13 amp fused spur is required for installation.Manual overrides and supplied for shutters, which are to be installed over entrance/ exit doorways to permit operation in the event of a power failure, usually from one side only.Control:A standard security key switch or rocker switch, alternative controls are available on request.Consult HAG Shutters & Grilles Ltd technical literature for details. HAG Shutters and Grilles Ltd can also provide a design and specification service and it is recommended that they be consulted early in the design process.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL617203.pdf&pg=2

A heavy-duty roller shutter manufactured from hard coated polycarbonate with interconnecting anodized hinges. designed for commercial applications in areas requiring medium security and where maximum vision is required.

More about Roller Shutter Clear Guard:
As standard - Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Hag Clear Guard Roller Shutter.
 Performance:
[Consult with HAG Shutters & Grilles for recommendations and details.].
 Arrangement:
[Vertical operation.].
 Shutter curtain:
[Hard coated polycarbonate].
 Finish as delivered::
[Clear polycarbonate]. - Standard factory finish.
 Frame/ Guides:
[110mm x 38mm x 3mm aluminium with brush seals]. - For standard frame.
 Finish as delivered:
[Natural Anodized]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finishes.


top ^

Guidance

for Roller Shutter Clear Guard

from HAG - The Door Specialists

More about Roller Shutter Clear Guard: As standard - Options - Further information.

As standard

Operation:

Single phase electrical operation

Control:

Security Key Switch / Rocker Switch.

Alternative controls are available on request.

Ironmongery:

Consult with HAG Shutters & Grilles for recommendations and details.

Options

Box sizes:

3200mm overall height – box size 300mm.

3650mm overall height – box size 350mm.

Guide rails:

Standard guide rails 110mm x 38mm x 3mm aluminium with brush seals .

Electrical operation:

A tubular motor housed within the barrel assembly with limit switches and thermal cut out to prevent overheating.

Draw 240 volts and 0.5-3.5 amps dependent on shutter size.

Override:

The provision of a separate 13 amp fused spur is required for installation.

Manual overrides and supplied for shutters, which are to be installed over entrance/ exit doorways to permit operation in the event of a power failure, usually from one side only.

Control:

A standard security key switch or rocker switch, alternative controls are available on request.

Consult HAG Shutters & Grilles Ltd technical literature for details. HAG Shutters and Grilles Ltd can also provide a design and specification service and it is recommended that they be consulted early in the design process.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Fireguard Roller Shutter FG Range from HAG - The Door Specialists Fire Shutter - Fireguard FG Range

Roller shutter with up to four hours fire resistance.Features and benefits:The doors comprise 76 mm curved, solid 20 gauge lath, with galvanized bright rolled carbon steel finish.The shutter box is manufactured from 0.91 bright spangle galvanized pressed steel, available in different designs to suit project requirements.Electrically operated through an industrial grade single phase motor, controlled by a three function starter – up/ stop/ close.An Auto Reset Solenoid is fitted to enable closing when receiving a signal from the fire alarm. The motor will automatically unbrake and the shutter will close through gravity.The FCP03 Fire panel can be interconnected to the fire alarm system to allow closing when the fire signal is received. An audio/ visual warning and timer delay can also be provided.Performance: Fire resistance up to 240 minutes.Arrangement: Vertical operation.

Roller shutter with up to four hours fire resistance.

Features and benefits:

  • The doors comprise 76 mm curved, solid 20 gauge lath, with galvanized bright rolled carbon steel finish.
  • The shutter box is manufactured from 0.91 bright spangle galvanized pressed steel, available in different designs to suit project requirements.
  • Electrically operated through an industrial grade single phase motor, controlled by a three function starter – up/ stop/ close.
  • An Auto Reset Solenoid is fitted to enable closing when receiving a signal from the fire alarm. The motor will automatically unbrake and the shutter will close through gravity.
  • The FCP03 Fire panel can be interconnected to the fire alarm system to allow closing when the fire signal is received. An audio/ visual warning and timer delay can also be provided.

More about Fire Shutter - Fireguard FG Range:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
[FG01]. - One hour fire protection.
[FG02]. - Two hour fire protection.
[FG04]. - Four hour fire protection.
 Shutter curtain:
  -Type:
76 x 0.71 mm curved galvanized steel.
  -Finish:
[Bright rolled galvanized carbon steel]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Frames/ guides:
  -Size:
[63 x 32 x 3 mm]. - For doors up to 5000 mm wide.
[100 x 32 x 3 mm]. - For doors up to 7000 mm wide.
  -Finish:
[Bright rolled galvanized carbon steel]. - Standard factory finish.
[Polyester powder coated]. - Optional factory finish.
 Operation:
[Audio/ visual warning and timer delay].
[Single phase electrically operated with triple function starter and auto reset solenoid].


top ^

Guidance

for Fire Shutter - Fireguard FG Range

from HAG - The Door Specialists

More about Fire Shutter - Fireguard FG Range: As standard - Further information.

As standard

Performance:

Fire resistance up to 240 minutes.

Arrangement:

Vertical operation.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of FT Compact Range from HAG - The Door Specialists Fire Shutter - FT Compact Range

The Fireguard FT range is a compact tubular driven fire shutter that provides a fire protection barrier for 1–4 hours.Manufactured to BS EN 1634-1 and BS 476-22 as standard. Constructed from steel sections of 76 mm cold rolled 20 gauge galvanized steel. The FT60 shutter provides a defence against the spread of fire and can be used as a security door on a day to day basis. The compact design allows the FT compact range to be installed in areas where traditional fire shutters are not possible. The system can we linked to audio/ visual deacon fire alarms to ensure automatic closing in case of fire detection with battery backup in the event of power failure.Usage:The Fireguard FT roller shutter is commonly used in kitchen servery areas, schools, hospitals and commercial offices where installation restrictions for space require a compact system.Width (maximum):7000 mm.Material:76 mm flat galvanized steel lath.Weight:12.5 kg/ m² (dependent on size).Finish:Galvanized bright rolled carbon steel, but polyester powder coat colours are available at additional cost.Shutter box:- Construction:1.5 mm bright spangle galvanized pressed steel coil casing available in various different designs to suit individual circumstances. - Box sizes:Overall height (top of box): Up to 2000 mm: Box size 250 mm.Up to 3000 mm: Box size 300 mm.Up to 4000 mm: Box size 350 mm. On larger widths the box sizes may move up one size due to deflection.Guide rail: - Construction:50 x 32 x 3 – 76 x 32 x 3 mm (dependent on width and height).- Finish:Galvanized steel; standard polyester powder coat colours are available.Operation: - Single phase electric:A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.Draw: 240 V and 0.5–2.5 A dependent upon the shutter size.Complete with battery back-up system that will enable self closure in the event of power failure.Provision of a 13 A fused spur is required for installation.Fire panel which can be interconnected to the fire alarm to allow closing when receiving fire signal. Audio visual warning and timer delay.Important note: Maintenance of fire shutters is required under the Regulatory Reform (Fire Safety) Order 2005 for companies. Failure to do so may invalidate insurance cover and building fire certification under the control of the local fire officer.It is essential that the structural surround to the opening has a fire rating of at least the equivalent to the fireguard product specified and is sufficient for fixings to ensure fully compliant installation.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=17203&f=COL271126.pdf&pg=0Warrington Fire ReportWF314225

The Fireguard FT range is a compact tubular driven fire shutter that provides a fire protection barrier for 1–4 hours.

Manufactured to BS EN 1634-1 and BS 476-22 as standard. Constructed from steel sections of 76 mm cold rolled 20 gauge galvanized steel. The FT60 shutter provides a defence against the spread of fire and can be used as a security door on a day to day basis. The compact design allows the FT compact range to be installed in areas where traditional fire shutters are not possible. The system can we linked to audio/ visual deacon fire alarms to ensure automatic closing in case of fire detection with battery backup in the event of power failure.

Usage:

The Fireguard FT roller shutter is commonly used in kitchen servery areas, schools, hospitals and commercial offices where installation restrictions for space require a compact system.

More about Fire Shutter - FT Compact Range:
As standard - Options - Approvals - Further information.

PendingFIRE SHUTTER:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
[FT01]. - One hour fire protection.
[FT02]. - Two hour fire protection.
[FT04]. - Four hour fire protection.
 Size (w x h):
[ ______ ] - Insert requirements.
 Finish:
  -Shutter:
[ ______ ] - Insert requirements.
  -Shutter Box:
[ ______ ] - Insert requirements.


top ^

Guidance

for Fire Shutter - FT Compact Range

from HAG - The Door Specialists

More about Fire Shutter - FT Compact Range: As standard - Options - Approvals - Further information.

As standard

Width (maximum):

7000 mm.

Material:

76 mm flat galvanized steel lath.

Weight:

12.5 kg/ m² (dependent on size).

Finish:

Galvanized bright rolled carbon steel, but polyester powder coat colours are available at additional cost.

Shutter box:

- Construction:

1.5 mm bright spangle galvanized pressed steel coil casing available in various different designs to suit individual circumstances.

- Box sizes:

Overall height (top of box):

  • Up to 2000 mm: Box size 250 mm.
  • Up to 3000 mm: Box size 300 mm.
  • Up to 4000 mm: Box size 350 mm.
  • On larger widths the box sizes may move up one size due to deflection.

Guide rail:

- Construction:

50 x 32 x 3 – 76 x 32 x 3 mm (dependent on width and height).

- Finish:

Galvanized steel; standard polyester powder coat colours are available.

Options

Operation:

- Single phase electric:

  • A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating.
  • Draw: 240 V and 0.5–2.5 A dependent upon the shutter size.
  • Complete with battery back-up system that will enable self closure in the event of power failure.
  • Provision of a 13 A fused spur is required for installation.
  • Fire panel which can be interconnected to the fire alarm to allow closing when receiving fire signal. Audio visual warning and timer delay.
  • Important note: Maintenance of fire shutters is required under the Regulatory Reform (Fire Safety) Order 2005 for companies. Failure to do so may invalidate insurance cover and building fire certification under the control of the local fire officer.
  • It is essential that the structural surround to the opening has a fire rating of at least the equivalent to the fireguard product specified and is sufficient for fixings to ensure fully compliant installation.

Approvals

  • Warrington Fire Report: WF314225.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of HAG Fire Curtain HF60 from HAG - The Door Specialists Fire Curtain HF60 HAG

A 60-minute fire protection curtain, which can be linked to the building's emergency fire protection systems to prevent the spread of fire by containment. Its specially coated glass fibre curtain protects against hot air transfer and protects main escape routes. The unit can be installed in widths up to 20 000 mm and heights up to 6000 mm.Standards: Fire integrity – E60: 60 minutes.BS 476-22:1987, BS 476-20:1987, BS EN 12101 Annex B, EN 13501-2:2007+A1:2009.Box:The fire curtain assembly comprises a box housing which includes the motorized barrel and wrapped curtain. The box is attached to channel section guides at each end – these guides are the main fixing point for the entire system. Curtain:The curtain is manufactured from a woven fibreglass and stainless steel fabric; in many cases this is coated with intumescent silicone.Guide rails:100 x 50 mm galvanized steel.Head box:Material: Galvanized steel.Up to 4 m high: 180 x 180 mm. Over 4 m: 210 x 210 mm.Bottom rail:Industry-standard ‘bell’ formed from galvanized steel.Operation:Single phase electric through 24 V DC motor.Controls:Supplied with gravity failsafe control panel with inbuilt lead-acid battery support.Finish:Head box, guides and bottom rail are galvanized and can be powder coated as required to any standard RAL or BS 4800 colour. Curtains are silver grey or charcoal finish, dependent on specification.Fixing:Face or reveal fixing to steel, masonry, hardwood or fire-boarded softwood.Safety vision panels:Size: 270 x 400 mm.Certified to two hours' fire protection.

A 60-minute fire protection curtain, which can be linked to the building's emergency fire protection systems to prevent the spread of fire by containment. Its specially coated glass fibre curtain protects against hot air transfer and protects main escape routes. The unit can be installed in widths up to 20 000 mm and heights up to 6000 mm.

Standards:

  • Fire integrity – E60: 60 minutes.
  • BS 476-22:1987, BS 476-20:1987, BS EN 12101 Annex B, EN 13501-2:2007+A1:2009.

More about Fire Curtain HF60 HAG:
As standard - Options - Further information.

PendingFIRE CURTAIN:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
HAG Fire Curtain HF60.
 Finish:
[Galvanized]. - Standard.
[Galvanized and powder coated]. - Optional; insert RAL or BS 4800 colour requirement.
 Controls:
[None].
[Audio/ visual warning devices].
[Beam sensor].
 Fixing:
[Face].
[Reveal].
 Safety vision panels:
  -Spot height 500 mm:
[Not required].
[Required]. - Insert quantity; consult manufacturer for details.
  -Spot height 1500 mm:
[Not required].
[Required]. - Insert quantity; consult manufacturer for details.


top ^

Guidance

for Fire Curtain HF60 HAG

from HAG - The Door Specialists

More about Fire Curtain HF60 HAG: As standard - Options - Further information.

As standard

Box:

The fire curtain assembly comprises a box housing which includes the motorized barrel and wrapped curtain. The box is attached to channel section guides at each end – these guides are the main fixing point for the entire system.

Curtain:

The curtain is manufactured from a woven fibreglass and stainless steel fabric; in many cases this is coated with intumescent silicone.

Guide rails:

100 x 50 mm galvanized steel.

Head box:

  • Material: Galvanized steel.
  • Up to 4 m high: 180 x 180 mm.
  • Over 4 m: 210 x 210 mm.

Bottom rail:

Industry-standard ‘bell’ formed from galvanized steel.

Operation:

Single phase electric through 24 V DC motor.

Controls:

Supplied with gravity failsafe control panel with inbuilt lead-acid battery support.

Options

Finish:

Head box, guides and bottom rail are galvanized and can be powder coated as required to any standard RAL or BS 4800 colour. Curtains are silver grey or charcoal finish, dependent on specification.

Fixing:

Face or reveal fixing to steel, masonry, hardwood or fire-boarded softwood.

Safety vision panels:

  • Size: 270 x 400 mm.
  • Certified to two hours' fire protection.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of HAG Fire Curtain HF240 from HAG - The Door Specialists Fire Curtain HF240 HAG

A 240-minute fire protection barrier, with the benefit of 30 minutes' irradiance. The product can be installed in suspended or solid ceilings and comes complete with back-up power supply. Maximum widths of 20 000 mm with an overlapping configuration, heights up to 6000 mm. Standards: Fire integrity – E240: 240 minutes.EW30 W rating: 30 minutes' radiation performance.Tested to European standards: BS EN 1634-1:2008, BS EN 1363-1:1999, BS EN 1363-2:1999, BS EN 12101 Annex B, EN 13501-2:2007+A1:2009.Applications:Suitable for use in airports, hospitals, restaurants, bars, elevator shafts, distribution centres, food and beverage premises.Box:The curtain assembly comprises a box housing which includes the motorized barrel and wrapped curtain. The box is attached to channel section guides at each end – these guides are the main fixing point for the entire system. Curtain:The curtain is manufactured from a woven fibreglass and stainless steel fabric; in many cases this is coated with intumescent silicone.Guide rails:100 x 50 mm galvanized steel.Head box:Material: Galvanized steel.Up to 4 m high: 180 x 180 mm. Over 4 m: 210 x 210 mm.Bottom rail:Industry-standard ‘bell’ formed from galvanized steel.Operation:Single phase electric through 24 VDC motor.Controls:Supplied with gravity failsafe control panel with inbuilt lead-acid battery support.Finish:Head box, guides and bottom rail are galvanized and can be powder coated as required to any standard RAL or BS 4800 colour. Curtains are silver grey or charcoal finish, dependent on specification.Fixing:Face or reveal fixing to steel, masonry, hardwood or fire boarded softwood.Safety vision panels:Size: 270 x 400 mm.Certified to two hours' fire protection.

A 240-minute fire protection barrier, with the benefit of 30 minutes' irradiance. The product can be installed in suspended or solid ceilings and comes complete with back-up power supply. Maximum widths of 20 000 mm with an overlapping configuration, heights up to 6000 mm.

Standards:

  • Fire integrity – E240: 240 minutes.
  • EW30 W rating: 30 minutes' radiation performance.

Tested to European standards: BS EN 1634-1:2008, BS EN 1363-1:1999, BS EN 1363-2:1999, BS EN 12101 Annex B, EN 13501-2:2007+A1:2009.

Applications:

Suitable for use in airports, hospitals, restaurants, bars, elevator shafts, distribution centres, food and beverage premises.

More about Fire Curtain HF240 HAG:
As standard - Options - Further information.

PendingFIRE CURTAIN:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
HAG Fire Curtain HF240.
 Finish:
[Galvanized]. - Standard.
[Galvanized and powder coated]. - Optional; insert RAL or BS 4800 colour requirement.
 Controls:
[None].
[Audio/ visual warning devices].
[Beam sensor].
 Fixing:
[Face].
[Reveal].
 Safety vision panels:
  -Spot height 500 mm:
[Not required].
[Required]. - Insert quantity; consult manufacturer for details.
  -Spot height 1500 mm:
[Not required].
[Required]. - Insert quantity; consult manufacturer for details.


top ^

Guidance

for Fire Curtain HF240 HAG

from HAG - The Door Specialists

More about Fire Curtain HF240 HAG: As standard - Options - Further information.

As standard

Box:

The curtain assembly comprises a box housing which includes the motorized barrel and wrapped curtain. The box is attached to channel section guides at each end – these guides are the main fixing point for the entire system.

Curtain:

The curtain is manufactured from a woven fibreglass and stainless steel fabric; in many cases this is coated with intumescent silicone.

Guide rails:

100 x 50 mm galvanized steel.

Head box:

  • Material: Galvanized steel.
  • Up to 4 m high: 180 x 180 mm.
  • Over 4 m: 210 x 210 mm.

Bottom rail:

Industry-standard ‘bell’ formed from galvanized steel.

Operation:

Single phase electric through 24 VDC motor.

Controls:

Supplied with gravity failsafe control panel with inbuilt lead-acid battery support.

Options

Finish:

Head box, guides and bottom rail are galvanized and can be powder coated as required to any standard RAL or BS 4800 colour. Curtains are silver grey or charcoal finish, dependent on specification.

Fixing:

Face or reveal fixing to steel, masonry, hardwood or fire boarded softwood.

Safety vision panels:

  • Size: 270 x 400 mm.
  • Certified to two hours' fire protection.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of HAG Fire Curtain HFS Plus from HAG - The Door Specialists Fire Curtain HFS Plus HAG

A fire protection curtain which provides the best levels of protections for fire and irradiance to property and personnel. It is designed to provide safe passage next to the curtain (for corridor and escape routes) and protection for close contact. Complete with smoke seals as standard to provide 120 minutes of smoke protection. Standards: Fire integrity – E: 120 minutes.Irradiance – W: 120 minutes.Insulating Zone – IZ: 120 minutes (measured from 50 mm from face of specimen).When tested to EN 1634-1. Classifications as EN 13501-2:2007+ A1: 2009, E240 EW60, BS EN 1634-1:2008, BS EN 1363-1:1999, BS EN 1363-2:1999, BS EN 949, EN1634-3, BS EN 12101 Annex B, EN 13501-2:2007+ A1:2009 and PAS 121.Applications:Suitable for use in airports, hospitals, kitchen servery hatches, offices, retail units and schools.Box:The fire curtain assembly comprises a box housing which includes the motorized barrel and wrapped curtain. The box is attached to channel section guides at each end – these guides are the main fixing point for the entire system. Curtain:The curtain is manufactured from a woven fibreglass and stainless steel fabric; in many cases this is coated with intumescent silicone.Guide rails:100 x 50 mm galvanized steel.Head box:Galvanized steel: Up to 4 m high: 210 x 240 mm. Bottom rail:Industry-standard ‘bell’ formed from galvanized steel.Operation:Single phase electric through 24 VDC motor.Controls:Supplied with gravity failsafe control panel with inbuilt lead-acid battery support.Finish:Head box, guides and bottom rail are galvanized and can be powder coated as required to any standard RAL or BS 4800 colour. Curtains are silver grey or charcoal finish, dependent on specification.Fixing:Face or reveal fixing to steel, masonry, hardwood or fire-boarded softwood.Safety vision panels:Size: 270 x 400 mm.Certified to two hours' fire protection.

A fire protection curtain which provides the best levels of protections for fire and irradiance to property and personnel. It is designed to provide safe passage next to the curtain (for corridor and escape routes) and protection for close contact. Complete with smoke seals as standard to provide 120 minutes of smoke protection.

Standards:

  • Fire integrity – E: 120 minutes.
  • Irradiance – W: 120 minutes.
  • Insulating Zone – IZ: 120 minutes (measured from 50 mm from face of specimen).

When tested to EN 1634-1. Classifications as EN 13501-2:2007+ A1: 2009, E240 EW60, BS EN 1634-1:2008, BS EN 1363-1:1999, BS EN 1363-2:1999, BS EN 949, EN1634-3, BS EN 12101 Annex B, EN 13501-2:2007+ A1:2009 and PAS 121.

Applications:

Suitable for use in airports, hospitals, kitchen servery hatches, offices, retail units and schools.

More about Fire Curtain HFS Plus HAG:
As standard - Options - Further information.

PendingFIRE CURTAIN:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
HAG Fire Curtain HFS Plus.
 Finish:
[Galvanized]. - Standard.
[Galvanized and powder coated]. - Optional; insert RAL or BS 4800 colour requirement.
 Controls:
[None].
[Audio/ visual warning devices].
[Beam sensor].
 Fixing:
[Face].
[Reveal].
 Safety vision panels:
  -Spot height 500 mm:
[Not required].
[Required]. - Insert quantity; consult manufacturer for details.
  -Spot height 1500 mm:
[Not required].
[Required]. - Insert quantity; consult manufacturer for details.


top ^

Guidance

for Fire Curtain HFS Plus HAG

from HAG - The Door Specialists

More about Fire Curtain HFS Plus HAG: As standard - Options - Further information.

As standard

Box:

The fire curtain assembly comprises a box housing which includes the motorized barrel and wrapped curtain. The box is attached to channel section guides at each end – these guides are the main fixing point for the entire system.

Curtain:

The curtain is manufactured from a woven fibreglass and stainless steel fabric; in many cases this is coated with intumescent silicone.

Guide rails:

100 x 50 mm galvanized steel.

Head box:

Galvanized steel: Up to 4 m high: 210 x 240 mm.

Bottom rail:

Industry-standard ‘bell’ formed from galvanized steel.

Operation:

Single phase electric through 24 VDC motor.

Controls:

Supplied with gravity failsafe control panel with inbuilt lead-acid battery support.

Options

Finish:

Head box, guides and bottom rail are galvanized and can be powder coated as required to any standard RAL or BS 4800 colour. Curtains are silver grey or charcoal finish, dependent on specification.

Fixing:

Face or reveal fixing to steel, masonry, hardwood or fire-boarded softwood.

Safety vision panels:

  • Size: 270 x 400 mm.
  • Certified to two hours' fire protection.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of HAG Smoke Curtain HS120 from HAG - The Door Specialists Smoke Curtain HS120 HAG

A two-hour smoke protection barrier tested up to a temperature of 600°C, this system can be specified as fixed or automated to compartment, channel and protect escape routes from smoke. The curtain can be continuous, with no maximum width, and can be installed discreetly for low headroom requirements. Maximum height 9000 mm.Standards: Achieves DA classification and is tested to EN 12101-1:2005 and A1:2006.Smoke integrity: E120.Applications:Suitable for use in airports, hospitals, restaurants, bars, elevator shafts, offices and distribution centres.Box:The curtain assembly comprises a box housing which includes the motorized barrel and wrapped curtain. The box is attached to channel section guides at each end – these guides are the main fixing point for the entire system. Curtain:The curtain is manufactured from a woven fibreglass and stainless steel fabric; in many cases this is coated with intumescent silicone.Guide rails:100 x 50 mm galvanized steel.Head box:Galvanized steel:Up to 4 m high: 180 x 180 mm. Over 4 m: 210 x 210 mm.Bottom rail:Industry-standard ‘bell’ formed from galvanized steel.Operation:Single phase electric through 24 VDC motor.Controls:Supplied with gravity failsafe control panel with inbuilt lead-acid battery support.Finish:Head box, guides and bottom rail are galvanized and can be powder coated as required to any standard RAL or BS 4800 colour. Curtains are silver grey or charcoal finish, dependent on specification.Fixing:Face or reveal fixing to steel, masonry, hardwood or fire-boarded softwood.Safety vision panels:Size: 270 x 400 mm.Certified to two hours' fire protection.

A two-hour smoke protection barrier tested up to a temperature of 600°C, this system can be specified as fixed or automated to compartment, channel and protect escape routes from smoke. The curtain can be continuous, with no maximum width, and can be installed discreetly for low headroom requirements. Maximum height 9000 mm.

Standards:

  • Achieves DA classification and is tested to EN 12101-1:2005 and A1:2006.
  • Smoke integrity: E120.

Applications:

Suitable for use in airports, hospitals, restaurants, bars, elevator shafts, offices and distribution centres.

More about Smoke Curtain HS120 HAG:
As standard - Options - Further information.

PendingSMOKE CURTAIN:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
HAG Smoke Curtain HS120.
 Finish:
[Galvanized]. - Standard.
[Galvanized and powder coated]. - Optional; insert RAL or BS 4800 colour requirement.
 Controls:
[None].
[Audio/ visual warning devices].
[Beam sensor].
 Fixing:
[Face].
[Reveal].
 Safety vision panels:
  -Spot height 500 mm:
[Not required].
[Required]. - Insert quantity; consult manufacturer for details.
  -Spot height 1500 mm:
[Not required].
[Required]. - Insert quantity; consult manufacturer for details.


top ^

Guidance

for Smoke Curtain HS120 HAG

from HAG - The Door Specialists

More about Smoke Curtain HS120 HAG: As standard - Options - Further information.

As standard

Box:

The curtain assembly comprises a box housing which includes the motorized barrel and wrapped curtain. The box is attached to channel section guides at each end – these guides are the main fixing point for the entire system.

Curtain:

The curtain is manufactured from a woven fibreglass and stainless steel fabric; in many cases this is coated with intumescent silicone.

Guide rails:

100 x 50 mm galvanized steel.

Head box:

Galvanized steel:

  • Up to 4 m high: 180 x 180 mm.
  • Over 4 m: 210 x 210 mm.

Bottom rail:

Industry-standard ‘bell’ formed from galvanized steel.

Operation:

Single phase electric through 24 VDC motor.

Controls:

Supplied with gravity failsafe control panel with inbuilt lead-acid battery support.

Options

Finish:

Head box, guides and bottom rail are galvanized and can be powder coated as required to any standard RAL or BS 4800 colour. Curtains are silver grey or charcoal finish, dependent on specification.

Fixing:

Face or reveal fixing to steel, masonry, hardwood or fire-boarded softwood.

Safety vision panels:

  • Size: 270 x 400 mm.
  • Certified to two hours' fire protection.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Armourguard Industrial C1 from HAG - The Door Specialists Industrial Roller Shutter - Armourguard Industrial C1

The Armourguard Industrial C1 is a solid steel single skin roller shutter. The C1 door is capable of many design variations to suit site requirements of ventilation and vision; this is achieved by incorporating a section of Armourguard N2M (punched) or P2 (perforated) whilst retaining its high quality security level. This model incorporates solid 76 mm curved galvanized steel sections available in three thicknesses to suit the size of opening and security level.Usage:The Armourguard Industrial C1 is most commonly used on industrial door applications, where strength and budget is the priority such as industrial premises loading bay doors, warehouse doors, car parks, agriculture premises and industrial units.Maximum width:12 m.Dimensions:76 x 0.71 mm (dependent on application size).Weight:9.34 kg/ m² (dependent on application size).Finish:Galvanized bright rolled carbon steel, polyester powder coat colours are available.Shutter box: - Construction:Manufactured from 0.91 mm bright spangle galvanized pressed steel coil casing available in various different designs to suit individual circumstances.- Box sizes:Overall height (top of box):Up to 3500 mm: Box size 350 mm.Up to 4250 mm: Box size 375 mm.Up to 5250 mm: Box size 400 mm.Up to 6000 mm: Box size 450 mm.Up to 8000 mm: Box size 600 mm.On larger widths the box sizes may move up one size due to deflection.Guide rail: - Construction:50 x 32 x 3 – 100 x 32 x 3 mm (dependent on width). - Finish:Galvanized steel; standard polyester powder coat colours are available.Operation: - Three phase electric:Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, complete with haul chain override for use in the event of power failure. Safety brakes are used to prevent the roller shutter from closing in the event of motor failure in line with EU legislation. Electrical requirements are dependent on usage, further details on request.- Override:A chain override is included to operate the shutter in the event of a power failure. This is only operable from one side. High level hand crank override can be specified if required.- Three phase electric:Design of this model will alter for three phase operation. Electrical requirements are dependent on usage, further details on request.- Override:A manual override is included to operate the shutter in the event of a power failure. This is usually only operable from only one side.- Hand chain operation:A counter balanced helical spring controlled via hand chain and chain lock to secure the C1 industrial door. A double spring unit is incorporated into the barrel assembly inline as a second device to prevent the roller shutter from closing in the event of single spring failure in line with EU legislation.- Control:Electric operation is via a standard push button control. Other controls are available on request. Further safety devices are available, dependent on requirements and operational circumstances.

The Armourguard Industrial C1 is a solid steel single skin roller shutter. The C1 door is capable of many design variations to suit site requirements of ventilation and vision; this is achieved by incorporating a section of Armourguard N2M (punched) or P2 (perforated) whilst retaining its high quality security level. This model incorporates solid 76 mm curved galvanized steel sections available in three thicknesses to suit the size of opening and security level.

Usage:

The Armourguard Industrial C1 is most commonly used on industrial door applications, where strength and budget is the priority such as industrial premises loading bay doors, warehouse doors, car parks, agriculture premises and industrial units.

More about Industrial Roller Shutter - Armourguard Industrial C1:
As standard - Options - Further information.

PendingROLLER SHUTTER:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Industrial C1.
 Size (w x h):
[ ______ ] - Insert requirements.
 Finish:
  -Shutter:
[ ______ ] - Insert requirements.
  -Shutter Box:
[ ______ ] - Insert requirements.


top ^

Guidance

for Industrial Roller Shutter - Armourguard Industrial C1

from HAG - The Door Specialists

More about Industrial Roller Shutter - Armourguard Industrial C1: As standard - Options - Further information.

As standard

Maximum width:

12 m.

Dimensions:

76 x 0.71 mm (dependent on application size).

Weight:

9.34 kg/ m² (dependent on application size).

Finish:

Galvanized bright rolled carbon steel, polyester powder coat colours are available.

Shutter box:

- Construction:

Manufactured from 0.91 mm bright spangle galvanized pressed steel coil casing available in various different designs to suit individual circumstances.

- Box sizes:

Overall height (top of box):

  • Up to 3500 mm: Box size 350 mm.
  • Up to 4250 mm: Box size 375 mm.
  • Up to 5250 mm: Box size 400 mm.
  • Up to 6000 mm: Box size 450 mm.
  • Up to 8000 mm: Box size 600 mm.
  • On larger widths the box sizes may move up one size due to deflection.

Guide rail:

- Construction:

50 x 32 x 3 – 100 x 32 x 3 mm (dependent on width).

- Finish:

Galvanized steel; standard polyester powder coat colours are available.

Options

Operation:

- Three phase electric:

Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, complete with haul chain override for use in the event of power failure. Safety brakes are used to prevent the roller shutter from closing in the event of motor failure in line with EU legislation. Electrical requirements are dependent on usage, further details on request.

- Override:

A chain override is included to operate the shutter in the event of a power failure. This is only operable from one side. High level hand crank override can be specified if required.

- Three phase electric:

Design of this model will alter for three phase operation. Electrical requirements are dependent on usage, further details on request.

- Override:

A manual override is included to operate the shutter in the event of a power failure. This is usually only operable from only one side.

- Hand chain operation:

A counter balanced helical spring controlled via hand chain and chain lock to secure the C1 industrial door. A double spring unit is incorporated into the barrel assembly inline as a second device to prevent the roller shutter from closing in the event of single spring failure in line with EU legislation.

- Control:

Electric operation is via a standard push button control. Other controls are available on request. Further safety devices are available, dependent on requirements and operational circumstances.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Armourguard Industrial F1 from HAG - The Door Specialists Industrial Roller Shutter - Armourguard Industrial F1

The Armourguard F1 is an industrial insulated roller shutter constructed from a twin skin steel lath injected with CFC free foam insulation. These insulated industrial doors are manufactured from two skins of a solid 100 mm flat galvanized steel section. The F1 insulated door uses a continuous nylon end locking system and a weatherproof profile that is incorporated on to the bottom section to create a seal that increases its reliability and performance. A brush strip can be used at high level to reduce air flow between the lintel and the roller shutter head plate. Glazed panels can also be incorporated into the roller shutter lath.Wind load tested to BS EN 13241-1 (Class 5).Acoustic value of 28 dB reduction (at 1 kHz).Thermal value 0.733 W/m²K (through centre of lath).Usage:The Armourguard Industrial F1 is the ideal roller shutter for insulating large industrial openings against heat, noise and energy loss. This product is commonly used on industrial applications where insulation, sound proofing and security is the priority, such as industrial premises loading bay doors, warehouse doors, storage facilities, agriculture premises, barns and industrial units.Maximum width:12 m.Dimensions:100 x 27 mm foam filled.Weight:16.5 kg/ m².Finish:Galvanized bright rolled carbon steel, polyester powder coat colours are available.Shutter box: - Construction:Manufactured from 0.91 mm bright spangle galvanized pressed steel coil casing available in various designs to suit individual circumstances.- Box sizes:Overall height (top of box): Up to 3000 mm: Box size 400 mm.Up to 4000 mm: Box size 450 mm.Up to 5000 mm: Box size 510 mm.Guide rail: - Construction:Standard guide rails are 90 x 32 x 3 mm galvanized steel. Double sided brush seal and carriers are used on the guide section to minimise air leakage.- Finish:Galvanized steel; standard polyester powder coat colours are available.Operation: - Three phase electric:Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, complete with haul chain override for use in the event of power failure. Safety brakes are used to prevent the roller shutter from closing in the event of motor failure in line with EU legislation. Electrical requirements are dependent on usage, further details on request. - Override:A chain override is included to operate the shutter in the event of a power failure. This is only operable from one side. High level hand crank override can be specified if required. - Hand chain operation:A counter balanced helical spring controlled via hand chain and chain lock to secure the F1 industrial door. A double spring unit is incorporated into the barrel assembly inline as a second device to prevent the roller shutter from closing in the event of single spring failure in line with EU legislation. - Control:Electric operation is via a standard push button control. Other controls are available on request. Further safety devices are available, dependant on requirements and operational circumstances.

The Armourguard F1 is an industrial insulated roller shutter constructed from a twin skin steel lath injected with CFC free foam insulation. These insulated industrial doors are manufactured from two skins of a solid 100 mm flat galvanized steel section. The F1 insulated door uses a continuous nylon end locking system and a weatherproof profile that is incorporated on to the bottom section to create a seal that increases its reliability and performance. A brush strip can be used at high level to reduce air flow between the lintel and the roller shutter head plate. Glazed panels can also be incorporated into the roller shutter lath.

  • Wind load tested to BS EN 13241-1 (Class 5).
  • Acoustic value of 28 dB reduction (at 1 kHz).
  • Thermal value 0.733 W/m²K (through centre of lath).

Usage:

The Armourguard Industrial F1 is the ideal roller shutter for insulating large industrial openings against heat, noise and energy loss. This product is commonly used on industrial applications where insulation, sound proofing and security is the priority, such as industrial premises loading bay doors, warehouse doors, storage facilities, agriculture premises, barns and industrial units.

More about Industrial Roller Shutter - Armourguard Industrial F1:
As standard - Options - Further information.

PendingINSULATED ROLLER SHUTTER:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Armourguard Industrial F1.
 Size (w x h):
[ ______ ] - Insert requirements
 Finish:
  -Shutter:
[ ______ ] - Insert requirements.
  -Shutter Box:
[ ______ ] - Insert requirements.


top ^

Guidance

for Industrial Roller Shutter - Armourguard Industrial F1

from HAG - The Door Specialists

More about Industrial Roller Shutter - Armourguard Industrial F1: As standard - Options - Further information.

As standard

Maximum width:

12 m.

Dimensions:

100 x 27 mm foam filled.

Weight:

16.5 kg/ m².

Finish:

Galvanized bright rolled carbon steel, polyester powder coat colours are available.

Shutter box:

- Construction:

Manufactured from 0.91 mm bright spangle galvanized pressed steel coil casing available in various designs to suit individual circumstances.

- Box sizes:

Overall height (top of box):

  • Up to 3000 mm: Box size 400 mm.
  • Up to 4000 mm: Box size 450 mm.
  • Up to 5000 mm: Box size 510 mm.

Guide rail:

- Construction:

Standard guide rails are 90 x 32 x 3 mm galvanized steel. Double sided brush seal and carriers are used on the guide section to minimise air leakage.

- Finish:

Galvanized steel; standard polyester powder coat colours are available.

Options

Operation:

- Three phase electric:

Conventional or direct drive industrial motor unit with integral travel limits, thermal cut out, complete with haul chain override for use in the event of power failure. Safety brakes are used to prevent the roller shutter from closing in the event of motor failure in line with EU legislation. Electrical requirements are dependent on usage, further details on request.

- Override:

A chain override is included to operate the shutter in the event of a power failure. This is only operable from one side. High level hand crank override can be specified if required.

- Hand chain operation:

A counter balanced helical spring controlled via hand chain and chain lock to secure the F1 industrial door. A double spring unit is incorporated into the barrel assembly inline as a second device to prevent the roller shutter from closing in the event of single spring failure in line with EU legislation.

- Control:

Electric operation is via a standard push button control. Other controls are available on request. Further safety devices are available, dependant on requirements and operational circumstances.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Garage Doors Seceuroglide from HAG - The Door Specialists Roller Shutter Garage Doors Seceuroglide

Double skin, foam filled aluminium slat, commonly used for high-security in domestic and commercial applications. Arrangement: Vertical operation.Finish as delivered: Polyester powder coated.Frame/ Guides: Extruded aluminium with an integral box section.Operation: Single phase electric motor with remote control unit with hand transmitters, wireless safety edge safety device and internal manual override and light.

Double skin, foam filled aluminium slat, commonly used for high-security in domestic and commercial applications.

More about Roller Shutter Garage Doors Seceuroglide:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
[Roller Shutter Garage Doors Seceuroglide].
[Seceoroglide Compact rolling garage door].
 Shutter curtain:
  -Type:
77 mm x 19 mm thick double skin, foam filled aluminium slat.
  -Colour:
[Black].
[Burgundy red].
[Fire green].
 Frame/ Guides:
  -Type:
Extruded aluminium with an integral box section.
  -Finish:
[Dark brown].
[White].


top ^

Guidance

for Roller Shutter Garage Doors Seceuroglide

from HAG - The Door Specialists

More about Roller Shutter Garage Doors Seceuroglide: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Finish as delivered:

Polyester powder coated.

Frame/ Guides:

Extruded aluminium with an integral box section.

Operation:

Single phase electric motor with remote control unit with hand transmitters, wireless safety edge safety device and internal manual override and light.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Seceuro CD38 Built in from HAG - The Door Specialists Roller Shutter Seceuro CD38 Built in

Double skin extruded aluminium non-vented slat 38 x 9 mm - for high security domestic, commercial and office applications. Arrangement: Vertical operation.Shutter box: Manufactured from honeycomb section PVC, finished in white only with a removable panel for installation and maintenance and sealed to withstand draughts and moisture ingress.Shutter curtain: 38 x 9 mm double skinned aluminium non vented slat. Frame/ Guide: Ref: H34 - 60 x 40 mm.

Double skin extruded aluminium non-vented slat 38 x 9 mm - for high security domestic, commercial and office applications.

More about Roller Shutter Seceuro CD38 Built in:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Type CD 38 Built-in roller shutter.
 Shutter curtain:
  -Type:
38 x 9 mm double skinned aluminium non vented slat.
  -Finish:
[Brown].
[Cream].
[White].
 Bottom slat:
  -Finish:
[Dark brown].
[White].
 Frame/ Guide:
  -Finish:
[Dark brown].
[White].
 Operation:
[Rod crank manual].
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Seceuro CD38 Built in

from HAG - The Door Specialists

More about Roller Shutter Seceuro CD38 Built in: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter box:

Manufactured from honeycomb section PVC, finished in white only with a removable panel for installation and maintenance and sealed to withstand draughts and moisture ingress.

Shutter curtain:

38 x 9 mm double skinned aluminium non vented slat.

Frame/ Guide:

Ref: H34 - 60 x 40 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Seceuro CD38 Built on from HAG - The Door Specialists Roller Shutter Seceuro CD38 Built on

Double skin extruded aluminium non-vented slat 38 x 9 mm, insurance approved for high security domestic, commercial and office applications. Arrangement: Vertical operation.Shutter box: Manufactured from roll formed aluminium. The bottom box is removable for installation and maintenance and chamfered at 45°. The shutter box is assembled on die cast aluminium end plates. Shutter curtain: 38 x 9 mm double skinned extruded aluminium.

Double skin extruded aluminium non-vented slat 38 x 9 mm, insurance approved for high security domestic, commercial and office applications.

More about Roller Shutter Seceuro CD38 Built on:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Type CD 38 Built-on roller shutter.
 Shutter curtain:
  -Type:
38 x 9 mm double skinned extruded aluminium.
  -Format:
[Glazed].
[Perforated].
[Punched].
  -Finish:
[Brown].
[Cream].
[White].
 Bottom slat:
  -Finish:
[Dark brown].
[White].
 Frame/ Guide:
[Ref: H30 - 60 x 24 mm]. - Standard frame.
[Ref: H40/S - 60 x 24 mm]. - Optional for higher security.
 Operation:
[Cable winch manual].
[Geared belt winder manual].
[Rod crank manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Seceuro CD38 Built on

from HAG - The Door Specialists

More about Roller Shutter Seceuro CD38 Built on: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter box:

Manufactured from roll formed aluminium. The bottom box is removable for installation and maintenance and chamfered at 45°. The shutter box is assembled on die cast aluminium end plates.

Shutter curtain:

38 x 9 mm double skinned extruded aluminium.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Seceuro CD60 Built on from HAG - The Door Specialists Roller Shutter Seceuro CD60 Built on

Double skin extruded aluminium non-vented slat 55 high x 14 mm thick, for high security in office, commercial and retail applications. Arrangement: Vertical operation.Shutter box: Manufactured from roll formed aluminium. The bottom box is removable for installation and maintenance and chamfered at 45°. The shutter box is assembled on die cast aluminium end plates.Shutter curtain: 55 x 14 mm double skinned extruded aluminium non vented slat.

Double skin extruded aluminium non-vented slat 55 high x 14 mm thick, for high security in office, commercial and retail applications.

More about Roller Shutter Seceuro CD60 Built on:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Type CD 60 Built-on roller shutter.
 Shutter curtain:
  -Type:
55 x 14 mm double skinned extruded aluminium non vented slat.
  -Finish:
[Brown].
[White].
 Bottom slat:
  -Finish:
[Dark brown].
[White].
 Frame/ Guide:
[Ref: UPH 240 – 75 mm wide x 27 mm deep].
[Ref: UPH 260 – 95 mm wide x 27 mm deep].
  -Finish:
[Dark brown].
[White].
 Operation:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Seceuro CD60 Built on

from HAG - The Door Specialists

More about Roller Shutter Seceuro CD60 Built on: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter box:

Manufactured from roll formed aluminium. The bottom box is removable for installation and maintenance and chamfered at 45°. The shutter box is assembled on die cast aluminium end plates.

Shutter curtain:

55 x 14 mm double skinned extruded aluminium non vented slat.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Seceuro CD77 Built on from HAG - The Door Specialists Roller Shutter Seceuro CD77 Built on

Double skin, foam filled slat 77 mm high x 19 mm thick, options include CD 78 vision panel slats with polycarbonate inserts. Designed to provide high security to domestic windows and garage doors and for medium security to commercial and office environments. Arrangement: Vertical operation.Shutter box: Manufactured from roll formed aluminium in two sections, finished in white or dark brown. The bottom box is removable for installation and maintenance and chamfered at 45°. The shutter box is assembled on die cast aluminium end plates.Frame/ Guide: Ref: UPH 250/89 – 90 mm wide x 34 mm deep.

Double skin, foam filled slat 77 mm high x 19 mm thick, options include CD 78 vision panel slats with polycarbonate inserts. Designed to provide high security to domestic windows and garage doors and for medium security to commercial and office environments.

More about Roller Shutter Seceuro CD77 Built on:
As standard - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Type CD 77 Built On Roller Shutter.
 Shutter curtain:
  -Type:
[77 x 19 mm Double skinned extruded aluminium].
[CD 78 vision panel 80 x 35 mm with polycarbonate inserts].
  -Finish:
[Brown].
[Light beige].
[White].
 Bottom slat:
  -Finish:
[Dark brown].
[White].
 Frame/ Guide:
  -Finish:
[Dark brown].
[White].
 Operation:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Seceuro CD77 Built on

from HAG - The Door Specialists

More about Roller Shutter Seceuro CD77 Built on: As standard - Further information.

As standard

Arrangement:

Vertical operation.

Shutter box:

Manufactured from roll formed aluminium in two sections, finished in white or dark brown. The bottom box is removable for installation and maintenance and chamfered at 45°. The shutter box is assembled on die cast aluminium end plates.

Frame/ Guide:

Ref: UPH 250/89 – 90 mm wide x 34 mm deep.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Seceuro CD800 Built on from HAG - The Door Specialists Roller Shutter Seceuro CD800 Built on

Single skin extruded aluminium slat with polycarbonate insert, providing partial vision - see-through protection and specialist security shutter for retail premises.Slats are nominal 77 mm high x 1.8 mm thick with 150 mm x 55 mm vision panels, providing up to 65% vision. Arrangement: Vertical operation.Shutter curtain: 77 x 1.8 mm single skinned extruded aluminium slats with 150 x 55 mm vision panels.Shutter box: Manufactured from roll formed aluminium in two sections. The bottom box is removable for installation and maintenance and chamfered at 45°. The shutter box is assembled on die cast aluminium end plates.Frame/ Guide: Ref: UPH 250/89 – 90 mm wide x 34 mm deep.Finish: CD 800 shutters can be powder coated to BS/RAL colours on request.

Single skin extruded aluminium slat with polycarbonate insert, providing partial vision - see-through protection and specialist security shutter for retail premises.

Slats are nominal 77 mm high x 1.8 mm thick with 150 mm x 55 mm vision panels, providing up to 65% vision.

More about Roller Shutter Seceuro CD800 Built on:
As standard - Options - Further information.

PendingROLLER SHUTTERS/ CURTAINS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Type CD 800 Built-on roller shutter.
 Shutter curtain:
  -Type:
77 x 1.8 mm single skinned extruded aluminium slats with 150 x 55 mm vision panels.
  -Finish:
[Brown].
[White].
 Bottom slat:
  -Finish:
[Dark brown].
[White].
 Frame/ Guide:
  -Finish:
[Dark brown].
[White].
 Operation:
[Single phase electrical].
[Spring loaded manual].
 Control:
[Rocker switch].
[Security key switch].


top ^

Guidance

for Roller Shutter Seceuro CD800 Built on

from HAG - The Door Specialists

More about Roller Shutter Seceuro CD800 Built on: As standard - Options - Further information.

As standard

Arrangement:

Vertical operation.

Shutter curtain:

77 x 1.8 mm single skinned extruded aluminium slats with 150 x 55 mm vision panels.

Shutter box:

Manufactured from roll formed aluminium in two sections. The bottom box is removable for installation and maintenance and chamfered at 45°. The shutter box is assembled on die cast aluminium end plates.

Frame/ Guide:

Ref: UPH 250/89 – 90 mm wide x 34 mm deep.

Options

Finish:

CD 800 shutters can be powder coated to BS/RAL colours on request.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Seceuro CD150 Built On Roller Shutters from HAG - The Door Specialists Roller shutter Seceuro CD150 Built On

Seceuro CD150 built on roller shutters, double skin foam filled aluminium slat, vented as standard but also available non-vented.Applications:Domestic/ commercial windows. Doors.Serveries.Cabinets.Shutter box: - Dimensions (nominal):40 mm high x 9 mm thick. - Construction:Roll formed aluminium in two sections; top and bottom boxes.Bottom box removable for installation and maintenance and chamfered at 45°.The shutter box is assembled on die cast aluminium endplates. - Weight:4.5 kg/m².Guide rails:Extruded aluminium with an integral box section for reinforcement and to facilitate fixing. High density6 mm pile brush seals for quiet and smooth operation. 53 x 25 mm (w x d).Security level:Medium to low security.Rod crank operation:For shutters up to 25 kg. Incorporates a geared rod crank handle 1500 mm long which hangs vertically and secures into a clip when not in use. The gear is installed in the box and the gear ratio varies with shutter weight.Spring loading:A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.Swivel belt winder:For shutters up to 15 kg. The swivel winder coils the belt when it is pulled to open the shutter. The belt is 14 mm wide and grey in colour. External shutters are supplied with a guide tube to protect the belt through the building wall.Geared belt winder:For shutters between 15–25 kg. 1:3 ratio with removable handle for belt operated shutters. Single phase electric provision of a 13 A fused spur is required for installation. A tubular motor within the barrel assembly with limit switches and the thermal cut out to prevent overheating. Draw240 V and 0.5–2.5 A dependent upon the shutter size.Control:Standard security keyswitch or rocker switch. Other controls are available on request.Override:A manual override should be priced and ordered separately for shutters which are to be installed on exit doorways to permit operation in the event of a power failure. This is usually operable from only one side.

Seceuro CD150 built on roller shutters, double skin foam filled aluminium slat, vented as standard but also available non-vented.

Applications:

  • Domestic/ commercial windows.
  • Doors.
  • Serveries.
  • Cabinets.

More about Roller shutter Seceuro CD150 Built On:
As standard - Options - Further information.

PendingBUILT ON ROLLER SHUTTERS:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Seceuro CD150 Built On Roller Shutters.
 Opening height:
[1600 mm]. - Box size: 165 mm.
[2000 mm]. - Box size: 165 mm.
[2800 mm]. - Box size: 165 mm.
 Width:
[ ______ ] - Maximum: 3400 mm. Insert requirements.
 Finish:
  -Box:
[ ______ ] - White or dark brown as standard. The box can be powder coated to alternative standard RAL or BS colours at an extra cost.
  -Guide rail:
[ ______ ] - White or dark brown as standard. The guide rails can be powder coated to alternative standard RAL or BS colours at an extra cost.
  -Shutter:
[Brown].
[Cream].
[White].
  -Bottom slat:
[Dark brown].
[White].
 Controls:
[ ______ ] - Consult manufacturer and insert requirements.


top ^

Guidance

for Roller shutter Seceuro CD150 Built On

from HAG - The Door Specialists

More about Roller shutter Seceuro CD150 Built On: As standard - Options - Further information.

As standard

Shutter box:

- Dimensions (nominal):

40 mm high x 9 mm thick.

- Construction:

  • Roll formed aluminium in two sections; top and bottom boxes.
  • Bottom box removable for installation and maintenance and chamfered at 45°.
  • The shutter box is assembled on die cast aluminium endplates.

- Weight:

4.5 kg/m².

Guide rails:

Extruded aluminium with an integral box section for reinforcement and to facilitate fixing. High density6 mm pile brush seals for quiet and smooth operation. 53 x 25 mm (w x d).

Security level:

Medium to low security.

Options

Rod crank operation:

For shutters up to 25 kg. Incorporates a geared rod crank handle 1500 mm long which hangs vertically and secures into a clip when not in use. The gear is installed in the box and the gear ratio varies with shutter weight.

Spring loading:

A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.

Swivel belt winder:

For shutters up to 15 kg. The swivel winder coils the belt when it is pulled to open the shutter. The belt is 14 mm wide and grey in colour. External shutters are supplied with a guide tube to protect the belt through the building wall.

Geared belt winder:

For shutters between 15–25 kg. 1:3 ratio with removable handle for belt operated shutters. Single phase electric provision of a 13 A fused spur is required for installation. A tubular motor within the barrel assembly with limit switches and the thermal cut out to prevent overheating. Draw240 V and 0.5–2.5 A dependent upon the shutter size.

Control:

Standard security keyswitch or rocker switch. Other controls are available on request.

Override:

A manual override should be priced and ordered separately for shutters which are to be installed on exit doorways to permit operation in the event of a power failure. This is usually operable from only one side.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Roller Shutter Personnel Door from HAG - The Door Specialists Roller Shutter Personnel Door

Features:Secure personnel wicket door.Finished with galvanized steel laths as standard.Designed for use with industrial roller shutter.

Features:

  • Secure personnel wicket door.
  • Finished with galvanized steel laths as standard.
  • Designed for use with industrial roller shutter.

More about Roller Shutter Personnel Door:
- Further information.

PendingROLLER SHUTTER PERSONNEL DOOR:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Roller Shutter Personnel Door.
 Size (clear opening):
[565 x 1605 mm]. - Standard.
[800 x 1830 mm]. - Euro size.
 Finish:
[Primer]. - Standard.
[Polyester powder coat ]. - Optional, insert colour.
 Locking system:
[Euro]. - Standard.
[Non-standard]. - Non-standard.


top ^

Guidance

for Roller Shutter Personnel Door

from HAG - The Door Specialists

Further Information

Literature:


RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 

View larger image of Sliding Folding Gate Expanda Range from HAG - The Door Specialists Sliding Folding Gate Expanda Range

Expanda is a trackless closure in steel construction with a diamond mesh design which can span any widths. It is used as a barrier access for loading bays and fire exits where personnel access requires restriction. Features:Grille curtain: 12.7 x 12.7 mm tubular cold rolled steel lattice. Dimensions (grille): 76 x 0.71 mm.Finish: White.Locking: Standard locking system.Operation: Manual operation.Stacking size: Approximately 15% of overall width.Weight: 8 kg/m².

Expanda is a trackless closure in steel construction with a diamond mesh design which can span any widths. It is used as a barrier access for loading bays and fire exits where personnel access requires restriction.

Features:

  • Grille curtain: 12.7 x 12.7 mm tubular cold rolled steel lattice.
  • Dimensions (grille): 76 x 0.71 mm.
  • Finish: White.
  • Locking: Standard locking system.
  • Operation: Manual operation.
  • Stacking size: Approximately 15% of overall width.
  • Weight: 8 kg/m².

More about Sliding Folding Gate Expanda Range:
- Further information.

PendingSTEEL CLOSURE:
 Manufacturer:
HAG - The Door Specialists .
  -Web:www.hag.co.uk.
  -Tel:+44 (0)800 072 3444.
  -Product reference:
Expanda.
 Size:
[ ______ ] - Insert w x h. No maximum width. Consult with manufacturer for standard height dimensions.
 Accessories:
[None].
[Trolley wheels]. - To allow for larger spans.


top ^

Guidance

for Sliding Folding Gate Expanda Range

from HAG - The Door Specialists

Further Information

Literature:

RIBA Product Selector

Additional information may be available for HAG - The Door Specialists from ribaproductselector.com.

Contacts:

www.hag.co.uk

info@hag.co.uk

T: +44 (0)800 072 3444

F: +44 (0)117 965 7773

top ^

 
Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 11 December 2017