A-Z Manufacturers (Gilgen Door Systems UK Ltd) |  CAWS Index (L20 60)
Gilgen Door Systems UK Ltd

Gilgen Door Systems UK Ltd

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

Securiparc House, Wimsey Way, Alfreton, Derbyshire. DE55 4LS

RIBA Product Selector
RIBA CPD

This NBS Plus page covers automatic door operator, automatic sliding door, doors, roller shutters, high security shutters and sectional overhead doors

relating to clause 60 DOORS

in L20 Doors/ shutters/ hatches.

For more NBS Plus information from this company, see the Gilgen Door Systems UK Ltd overview page which includes a clause list and a product list.


Products from Gilgen Door Systems UK Ltd

Select to expand
Automatic folding doors (1)
Select to expand
Automatic sliding doors (7)
Select to expand
High speed doors (5)
Select to expand
Roller grilles (1)
Select to expand
Roller shutters (10)
Select to expand
Sectional overhead doors (1)
Select to expand
Sliding folding shutter doors (1)
 

View larger image of FFM 4 Wing Bi-Part Folding Door System from Gilgen Door Systems UK LtdFFM 4 Wing Bi-Part Folding Door System

The FFM 4 Wing Bi-Part Folding Door System is designed, constructed and installed to satisfy BS EN 16005:2012, and also complies with the Building Regulations (E&W) Approved Document M, The Equality Act 2010 and BS 8300:2009.The system requires a minimum of installation space, yet offers maximum clearance width. It is suitable for a wide variety of applications such as: retail, hotels, offices, airports, stations, hospitals, schools, colleges, garden centres and leisure.All Gilgen folding doors are supplied complete with a fail-safe system which gives up to 30 minutes operation in the event of a mains failure. The main drive unit also incorporates both an auto-reverse safety mechanism and safety stopping mechanisms.All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.Door profile:40 mm thick.Drive system:FFM drive unit incorporating both auto reverse safety mechanism and safety stopping mechanisms.Safety:Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power).Operation:24 V DC motor with microprocessor controller. Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals, voice message systems to assist partially sighted people and integrates with access control systems.Control:Bedis hard wired programming key pad, designed for installation in a central control panel.Configured for Automatic/ Manual/ Summer/ Winter/ Night/ Exit/ Open door operating modes.Door weight:70 kg (per folding door leaf).Power requirements:230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.Safety and security:A firmly secured, 900 mm high, solid glazed barrier can be provided at right angles to the threshold, in accordance with BS EN 16005.Mechanical lock incorporated within door operator supplied as standard. Additional options include:Bottom rail locks. External manual unlocking facility.Door movement guide:Recessed floor track, helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain. Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL405455.pdf&pg=10CE marked0TUV NORD 10DIN EN 60335-1:200710DIN18650-1 and DIN 18650-2 (2005 and 2010)10ISO 9001: 2008

The FFM 4 Wing Bi-Part Folding Door System is designed, constructed and installed to satisfy BS EN 16005:2012, and also complies with the Building Regulations (E&W) Approved Document M, The Equality Act 2010 and BS 8300:2009.

The system requires a minimum of installation space, yet offers maximum clearance width. It is suitable for a wide variety of applications such as: retail, hotels, offices, airports, stations, hospitals, schools, colleges, garden centres and leisure.

All Gilgen folding doors are supplied complete with a fail-safe system which gives up to 30 minutes operation in the event of a mains failure. The main drive unit also incorporates both an auto-reverse safety mechanism and safety stopping mechanisms.

All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.

More about FFM 4 Wing Bi-Part Folding Door System:
As standard - Options - Approvals - Further information.

PendingAUTOMATIC DOOR OPERATOR:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
FFM 4 Wing Bi-Part Folding Door System.
 Door configuration:
[Bi parting folding].
 Clearance width:
[ ______ ] - 800–1600 mm; insert requirements.
 Door height:
[ ______ ] - 2000–2500 mm; insert requirements.
 Finish:
[Anodized silver].
[Polyester powder coated RAL]. - Insert RAL colour reference.
 Glazing:
  -Configuration:
[Single glazed, 10 mm].
[Double glazed, 16 mm]. - Available on request.
  -Fanlights:
[Not required].
[Required]. - Insert size. Available height, 500–1000 mm.
 Control:
[Bedis hard wired control unit].
[Six position key switch]. - Optional.
 Activation:
[Integration with access control systems].
[Manual push pad].
[Motion sensors].
 Locking and security:
[ ______ ] - Installation specific; please consult manufacturer and insert requirements.
 Door movement guide:
[None].
[Recessed floor track]. - Available upon request.


top ^

Guidance

for FFM 4 Wing Bi-Part Folding Door System

from Gilgen Door Systems UK Ltd

More about FFM 4 Wing Bi-Part Folding Door System: As standard - Options - Approvals - Further information.

As standard

Door profile:

40 mm thick.

Drive system:

FFM drive unit incorporating both auto reverse safety mechanism and safety stopping mechanisms.

Safety:

  • Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.
  • Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.
  • Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.
  • Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power).

Operation:

24 V DC motor with microprocessor controller. Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals, voice message systems to assist partially sighted people and integrates with access control systems.

Control:

  • Bedis hard wired programming key pad, designed for installation in a central control panel.
  • Configured for Automatic/ Manual/ Summer/ Winter/ Night/ Exit/ Open door operating modes.

Door weight:

70 kg (per folding door leaf).

Power requirements:

230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.

Options

Safety and security:

A firmly secured, 900 mm high, solid glazed barrier can be provided at right angles to the threshold, in accordance with BS EN 16005.Mechanical lock incorporated within door operator supplied as standard. Additional options include:

  • Bottom rail locks.
  • External manual unlocking facility.

Door movement guide:

Recessed floor track, helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Approvals

  • CE marked .
  • TUV NORD .
  • British Standards Institution: DIN EN 60335-1:2007. British Standards Institution
  • British Standards Institution: DIN18650-1 and DIN 18650-2 (2005 and 2010). British Standards Institution
  • British Standards Institution: ISO 9001: 2008. British Standards Institution

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of EI30 Fire Rated Automatic Sliding Door System from Gilgen Door Systems UK LtdEI30 Fire Rated Automatic Sliding Door System

The EI30 fire rated automatic sliding door system provides convenient, barrier-free access in day-to-day situations, while offering robust flame protection and easy entry for the emergency services in the event of a fire. The system can be used to divide rooms into compartments providing reliable fire protection along with a heat-shield for up to 30 minutes. If a fire alarm is activated, the automatic sliding fire-door can be opened manually like a conventional swing door in order to provide an emergency exit. Built-in closing mechanisms ensure that the door shuts again to provide a fire barrier once it has performed its emergency-exit function.All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.Door profile:73 mm thick.Door panel weight:Standard SLX drive: 2 x 120 kg.Standard SLX drive with booster: 2 x 150 kg.SLX V drive with dual motors: 2 x 240 kg.Drive system:EI30 sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a slender profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.Safety:Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power).Operation:24 V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open. Power requirements:230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.Clearances: - Width (maximum): Single sliding door: 1600 mm.Bi-parting sliding door: 3200 mm. - Height: Single sliding door: 2500 mm.Bi-parting sliding door: 2500 mm.Configuration (break out solutions only):The bi-parting sliding door system with break out is designed to provide convenient, barrier free access in day-to-day situations, while guaranteeing a safe exit for occupants and easy entry for emergency services in the event of a fire. In compliance with BS EN 16005 door leaves (or door set leaves and side screens) are capable of being broken out from any position in the direction of escape. The total force to release the break out function does not exceed 220 N. Rear door safety: Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are;900 mm high, firmly secured, solid glazed barrier, in accordance with BSEN 16005.2.5 m high, fully glazed pocket screen complying with BS EN 16005.Security:A key turn manual hook lock (with steel insert in the leading edge for improved security and strength) is included as standard however there are a range of options available such as in head electric locks and multi point locking for added security. Integration with access control systems is also achievable. Please consult manufacturer.Control:D Bedix hard wired programming key pad (Incorporating digital display screen). Designed for installation in a central control panel. Configured for Automatic/ Manual/ Night/ Exit/ Open door operating modes.Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.F Key: Multi user, compact programmable portable unit enabling restricted personnel access.Six position key switch. Single point door control but with NO fault identification.Operation:Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals and voice message systems to assist partially sighted people and integrates with access control systems.Door movement guide:Surface mounted fixed point guide enhances efficiency of door movement.Recessed floor track:Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain. Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL345157.pdf&pg=410BS476-22: 198710BS EN 1634-1: 200010ISO 9001: 20080CE approved0TUV NORD10DIN18650-1 and DIN 18650-2 (2005 and 2010)

The EI30 fire rated automatic sliding door system provides convenient, barrier-free access in day-to-day situations, while offering robust flame protection and easy entry for the emergency services in the event of a fire. The system can be used to divide rooms into compartments providing reliable fire protection along with a heat-shield for up to 30 minutes. If a fire alarm is activated, the automatic sliding fire-door can be opened manually like a conventional swing door in order to provide an emergency exit. Built-in closing mechanisms ensure that the door shuts again to provide a fire barrier once it has performed its emergency-exit function.

All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.

More about EI30 Fire Rated Automatic Sliding Door System:
As standard - Options - Approvals - Further information.

PendingAUTOMATIC SLIDING DOOR:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
EI30 Fire Resistant Automatic Sliding Door System FAT.
 Door:
  -Configuration:
[Bi-parting sliding doors, no fixed panels].
[Bi-parting sliding doors, two fixed panels].
[Single sliding door, no fixed panels].
 Clearance:
  -Height:
[ ______ ] - Insert requirements.
  -Width:
[ ______ ] - Insert requirements.
 Finish:
[Polyester powder coated RAL]. - Insert colour.
 Drive operation:
[Standard SLX].
[Standard SLX with booster].
[Heavy duty SLX V drive with dual motors].
 Infill:
[Solid construction].
[EI30, transparent fire resistant glass 15-17 mm].
[EI30, transparent fire resistant glass 23 mm].
 Control:
[D Bedix hard wired control incorporating digital display screen].
[F key].
[Kombi C Bedix push button control].
 Activation:
[Integration with access control systems].
[Manual push pad].
[Motion sensors].
 Locking and security:
[ ______ ] - Installation specific; please consult manufacturer and insert requirements.
 Door movement guide:
[Recessed floor track]. - Not suitable if break out required.
[Surface mounted fixed point guide].
 Rear door safety:
[ ______ ] - Installation specific please consult manufacturer.


top ^

Guidance

for EI30 Fire Rated Automatic Sliding Door System

from Gilgen Door Systems UK Ltd

More about EI30 Fire Rated Automatic Sliding Door System: As standard - Options - Approvals - Further information.

As standard

Door profile:

73 mm thick.

Door panel weight:

  • Standard SLX drive: 2 x 120 kg.
  • Standard SLX drive with booster: 2 x 150 kg.
  • SLX V drive with dual motors: 2 x 240 kg.

Drive system:

EI30 sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a slender profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.

Safety:

  • Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.
  • Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.
  • Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.
  • Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power).

Operation:

24 V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open.

Power requirements:

230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.

Options

Clearances:

- Width (maximum):

  • Single sliding door: 1600 mm.
  • Bi-parting sliding door: 3200 mm.

- Height:

  • Single sliding door: 2500 mm.
  • Bi-parting sliding door: 2500 mm.

Configuration (break out solutions only):

The bi-parting sliding door system with break out is designed to provide convenient, barrier free access in day-to-day situations, while guaranteeing a safe exit for occupants and easy entry for emergency services in the event of a fire. In compliance with BS EN 16005 door leaves (or door set leaves and side screens) are capable of being broken out from any position in the direction of escape. The total force to release the break out function does not exceed 220 N.

Rear door safety:

Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are;

  • 900 mm high, firmly secured, solid glazed barrier, in accordance with BSEN 16005.
  • 2.5 m high, fully glazed pocket screen complying with BS EN 16005.

Security:

A key turn manual hook lock (with steel insert in the leading edge for improved security and strength) is included as standard however there are a range of options available such as in head electric locks and multi point locking for added security. Integration with access control systems is also achievable. Please consult manufacturer.

Control:

  • D Bedix hard wired programming key pad (Incorporating digital display screen). Designed for installation in a central control panel. Configured for Automatic/ Manual/ Night/ Exit/ Open door operating modes.
  • Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.
  • Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.
  • F Key: Multi user, compact programmable portable unit enabling restricted personnel access.
  • Six position key switch. Single point door control but with NO fault identification.

Operation:

Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals and voice message systems to assist partially sighted people and integrates with access control systems.

Door movement guide:

Surface mounted fixed point guide enhances efficiency of door movement.

Recessed floor track:

Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Approvals

  • British Standards Institution: BS476-22: 1987. British Standards Institution
  • British Standards Institution: BS EN 1634-1: 2000. British Standards Institution
  • British Standards Institution: ISO 9001: 2008. British Standards Institution
  • CE approved .
  • TUV NORD .
  • British Standards Institution: DIN18650-1 and DIN 18650-2 (2005 and 2010). British Standards Institution

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of PST Insulated Automatic Sliding Door System from Gilgen Door Systems UK LtdPST Insulated Automatic Sliding Door System

Tested in accordance with EN 16361/ EN 14351-1 the PST automatic door system consists of thermally insulated Gilgen PST door profiles matched with Gilgen’s SLX-M operator. This combination delivers both an energy efficient and visually appealing solution with low U-values (1.1–1.8 W/m²k), low air permeability, high wind load capacity and high resistance to driving rain.The slimline PST door profile delivers a robust thermal barrier combined with a low visible profile suitable for high volume, heavy duty, retail trade, hotels, offices, transport terminals, hospitals, schools, colleges, garden centres and leisure. All equipment is designed to meet the rigorous safety requirements of BS EN 16005, Building Regulations (E & W) Part M and The Equality Act 2010, BS 8300. Furthermore, equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.Drive system:SLX-M sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender in profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.Safety:Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimizing pedestrian safety.Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within three seconds after activation by the activators in the escape direction (or within five seconds in the event of the loss of power).Operation:24 V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open. Door weight:Single sliding doors: 1 x 150 kg.Bi-parting doors: 2 x 250 kg.Power requirements:230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.Rear door safety:Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are:900 mm high, firmly secured, solid glazed barrier, in accordance with BSEN 16005.2.5 m high, fully glazed pocket screen complying with BS EN 16005.Control:D Bedix hard wired programming key pad (incorporating digital display screen) designed for installation in a central control panel. Configured for automatic/ manual/ night/ exit/ open door operating modes.Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.F Key: Multi user, compact programmable portable unit enabling restricted personnel access.Six position key switch. Single point door control but with NO fault identification.Operation:Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals, voice message systems to assist partially sighted people and integrates with access control systems.Door movement guide:Surface mounted fixed point guide enhances efficiency of door movement.Recessed floor track:Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.0CEApproved0TUVApproved10Air permeability Class 2 (PPD2) in accordance with EN 1220710Class 5A water tightness in accordance with EN 1220810Wind Load Capacity PPD 800A, PPD 800B, PPD 700C

Tested in accordance with EN 16361/ EN 14351-1 the PST automatic door system consists of thermally insulated Gilgen PST door profiles matched with Gilgen’s SLX-M operator. This combination delivers both an energy efficient and visually appealing solution with low U-values (1.1–1.8 W/m²k), low air permeability, high wind load capacity and high resistance to driving rain.

The slimline PST door profile delivers a robust thermal barrier combined with a low visible profile suitable for high volume, heavy duty, retail trade, hotels, offices, transport terminals, hospitals, schools, colleges, garden centres and leisure. All equipment is designed to meet the rigorous safety requirements of BS EN 16005, Building Regulations (E & W) Part M and The Equality Act 2010, BS 8300. Furthermore, equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.

More about PST Insulated Automatic Sliding Door System:
As standard - Options - Approvals - Further information.

PendingAUTOMATIC SLIDING DOOR:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
PST Insulated Automatic Sliding Door System.
 Door:
  -Configuration:
[Bi parting no fixed side panels].
[Bi parting two fixed side panels].
[Bi-parting, two fixed panels and fan light].
  -Clearance width:
[ ______ ] - 700–1500 mm (single sliding); 800–3000 mm (bi-parting).
  -Height:
[ ______ ] - 2100–3000 mm; insert requirements.
 Finish:
[Polyester powder coated, RAL]. - Insert colour requirements.
 Glazing:
[ ______ ] - Insulating glass, double glazing 24–28 mm thickness. Triple glazing 31–38 mm. Installation specific; please consult manufacturer and insert requirements.
 Control:
[D Bedix hard wired control unit].
[F Key].
[Kombi D Bedix].
 Activation:
[Integration with access control systems].
[Manual push pad].
[Motion sensors].
 Locking and security:
[Multipoint].
[Standard locking built into drive mechanism].
 Door movement guide:
[Recessed floor track].
[Surface mounted fixed point guide].
 Rear door safety:
[ ______ ] - Installation specific please consult manufacturer.


top ^

Guidance

for PST Insulated Automatic Sliding Door System

from Gilgen Door Systems UK Ltd

More about PST Insulated Automatic Sliding Door System: As standard - Options - Approvals - Further information.

As standard

Drive system:

SLX-M sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender in profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.

Safety:

  • Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimizing pedestrian safety.
  • Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.
  • Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.
  • Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within three seconds after activation by the activators in the escape direction (or within five seconds in the event of the loss of power).

Operation:

24 V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open.

Door weight:

  • Single sliding doors: 1 x 150 kg.
  • Bi-parting doors: 2 x 250 kg.

Power requirements:

230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.

Options

Rear door safety:

Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are:

  • 900 mm high, firmly secured, solid glazed barrier, in accordance with BSEN 16005.
  • 2.5 m high, fully glazed pocket screen complying with BS EN 16005.

Control:

  • D Bedix hard wired programming key pad (incorporating digital display screen) designed for installation in a central control panel. Configured for automatic/ manual/ night/ exit/ open door operating modes.
  • Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.
  • Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.
  • F Key: Multi user, compact programmable portable unit enabling restricted personnel access.
  • Six position key switch. Single point door control but with NO fault identification.

Operation:

Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals, voice message systems to assist partially sighted people and integrates with access control systems.

Door movement guide:

Surface mounted fixed point guide enhances efficiency of door movement.

Recessed floor track:

Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Approvals

  • CE: Approved.
  • TUV: Approved.
  • British Standards Institution: Air permeability Class 2 (PPD2) in accordance with EN 12207. British Standards Institution
  • British Standards Institution: Class 5A water tightness in accordance with EN 12208. British Standards Institution
  • British Standards Institution: Wind Load Capacity PPD 800A, PPD 800B, PPD 700C. British Standards Institution

Further Information

Literature:

RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of RC2/3 Automatic Sliding Door System (Burglar Resistance) from Gilgen Door Systems UK LtdRC2/3 Automatic Sliding Door System (Burglar Resistance)

RC2/3 automatic doors are suitable for applications with a higher threat of break-in or criminal attack such as banks, jewellers shops, electrical retailers, museums and offices. The reinforced door profiles incorporate a multi point locking mechanism approved to EN 1628 (static tests), EN 1629 (dynamic tests) and EN 1630 (manual burglar test) thereby achieving overall security rating of RC2 or RC3.RC3 has also been assessed to conform to the security requirement of PAS24:2012.Thanks to their slim line looks, RC2/3 automatic doors are similar in appearance to standard automatic doors offering a solution that is suitable for design conscious environments. Designed to satisfy BS EN 16005:2012. Gilgen SLX –M sliding door operators are tested for 1 million cycles, providing proven reliability. Compliance with other notable UK standards such as Part M & Part B of the building regulations, The Equality Act and BS 8300:2009 is also achieved.Drive system:RC2/3 SLX-M sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender in profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.Safety:Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)Operation:24V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open. Security:A choice of either automatic or manual multipoint locking (integrated into the door leaf) is available please consult the manufacturer. Door weight:Single sliding doors: 1 x 150 kg.Bi-parting doors: 2 x 250 kg.Power requirements:230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.Height:Single sliding, RC2: 2000–3330 mm.Single sliding, RC3: 2000–2640 mm.Bi-parting, RC2: 2000–3330 mm.Bi-parting, RC3: 2000–2640 mm.Rear door safety:Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are;900 mm high, firmly secured, solid glazed barrier, in accordance with BSEN 16005.2.5 m high, fully glazed pocket screen complying with BS EN 16005.Control:D Bedix hard wired programming key pad (incorporating digital display screen) designed for installation in a central control panel. Configured for automatic/ manual/ night/ exit/ open door operating modes.Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.F Key: Multi user, compact programmable portable unit enabling restricted personnel access.Six position key switch. Single point door control but with NO fault identification.Operation:Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals, voice message systems to assist partially sighted people and integrates with access control systems.Door movement guide:Surface mounted fixed point guide enhances efficiency of door movement.Recessed floor track: Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain. Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL489625.pdf&pg=10CE approval0TUV10RC2 and RC3 in accordance with EN 1627 to EN 1630 (2011)0Exova WarringtonFireAssessed to conform to the security requirements of PAS24:2012

RC2/3 automatic doors are suitable for applications with a higher threat of break-in or criminal attack such as banks, jewellers shops, electrical retailers, museums and offices. The reinforced door profiles incorporate a multi point locking mechanism approved to EN 1628 (static tests), EN 1629 (dynamic tests) and EN 1630 (manual burglar test) thereby achieving overall security rating of RC2 or RC3.

RC3 has also been assessed to conform to the security requirement of PAS24:2012.

Thanks to their slim line looks, RC2/3 automatic doors are similar in appearance to standard automatic doors offering a solution that is suitable for design conscious environments. Designed to satisfy BS EN 16005:2012. Gilgen SLX –M sliding door operators are tested for 1 million cycles, providing proven reliability. Compliance with other notable UK standards such as Part M & Part B of the building regulations, The Equality Act and BS 8300:2009 is also achieved.

More about RC2/3 Automatic Sliding Door System (Burglar Resistance):
As standard - Options - Approvals - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
RC2/3 Automatic Sliding Door System.
 Door :
  -Configuration:
[Single sliding WITHOUT side panel].
[Bi parting NO fixed side panels].
[Bi parting TWO fixed side panels].
  -Clearance width:
[ ______ ] - 700–1650 mm (single sliding); 800–3000 mm (bi-parting).
  -Height:
[ ______ ] - Insert requirements from 'Options' below.
 Finish:
[Polyester powder coated, RAL]. - Insert colour requirements.
[Silver anodised].
 Glazing:
[Glazed fan light option]. - Bi-parting only, consult manufacturer.
[P4A (EN356) high security glass (RC2)].
[P5A (EN356) high security glass (RC3)].
 Control:
[D Bedix hard wired control unit].
[F Key].
[Kombi D Bedix].
 Security locking:
[Manual].
[Automatic].
 Activation:
[Integration with access control systems].
[Manual push pad].
[Motion sensors].
 Door movement guide:
[Recessed floor track].
[Surface mounted fixed point guide].
 Rear door safety:
[ ______ ] - Installation specific please consult manufacturer.


top ^

Guidance

for RC2/3 Automatic Sliding Door System (Burglar Resistance)

from Gilgen Door Systems UK Ltd

More about RC2/3 Automatic Sliding Door System (Burglar Resistance): As standard - Options - Approvals - Further information.

As standard

Drive system:

RC2/3 SLX-M sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender in profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.

Safety:

  • Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.
  • Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.
  • Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.
  • Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)

Operation:

24V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open.

Security:

A choice of either automatic or manual multipoint locking (integrated into the door leaf) is available please consult the manufacturer.

Door weight:

  • Single sliding doors: 1 x 150 kg.
  • Bi-parting doors: 2 x 250 kg.

Power requirements:

230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.

Options

Height:

  • Single sliding, RC2: 2000–3330 mm.
  • Single sliding, RC3: 2000–2640 mm.
  • Bi-parting, RC2: 2000–3330 mm.
  • Bi-parting, RC3: 2000–2640 mm.

Rear door safety:

Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are;

  • 900 mm high, firmly secured, solid glazed barrier, in accordance with BSEN 16005.
  • 2.5 m high, fully glazed pocket screen complying with BS EN 16005.

Control:

  • D Bedix hard wired programming key pad (incorporating digital display screen) designed for installation in a central control panel. Configured for automatic/ manual/ night/ exit/ open door operating modes.
  • Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.
  • Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.
  • F Key: Multi user, compact programmable portable unit enabling restricted personnel access.
  • Six position key switch. Single point door control but with NO fault identification.

Operation:

Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals, voice message systems to assist partially sighted people and integrates with access control systems.

Door movement guide:

Surface mounted fixed point guide enhances efficiency of door movement.

Recessed floor track:

Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Approvals

  • CE approval .
  • TUV .
  • British Standards Institution: RC2 and RC3 in accordance with EN 1627 to EN 1630 (2011). British Standards Institution
  • Exova WarringtonFire: Assessed to conform to the security requirements of PAS24:2012 .

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of SLX/D Hermetically Sealed Sliding Door from Gilgen Door Systems UK LtdSLX/D Hermetically Sealed Automatic Sliding Door

Tested for 1 million cycles SLX sliding door operators offer proven reliability as well as the integration of a number of technological advancements such as CanBus technology for enhanced operational safety and blue tooth wireless technology for easier access and control. The SLX/D with its unique patented pivot mechanism is the ideal choice where air tight door and hands free access are a priority for guaranteed optimum hygiene or sound proofing. It is particularly suitable for doors in hospitals, operating rooms, laboratories, music rooms, pharmaceutical and food industries.All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.Drive system:SLX Sliding door drive unit with pivoting mechanism that enables the sliding wing to be simultaneously lowered and pressed against the door frame during the closing motion.Integrates Bluetooth wireless control technology and powerful, near silent drive into a very slender profile. System components are connected via a CANbus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.Safety:Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)Water resistance:IP20 rating.Operation:24 V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open. Power requirements:230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.Door panel weight (maximum):120 kg.Control:Portable Bedix wireless control unit: Designed to enable selection of operating modes and configure parameters. Simple menu based controls. No fixed location required. Password protected.D-Bedix hard wired programming key pad with digital display. Designed for installing a central control panel. Configured or Automatic – Night – Exit – Open door operating modes.F Key: Each unit can be programmed to restrict access to areas which normally need to be kept locked.Operation:Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals and voice message systems to assist partially sighted people and integrates with access control systems.X-Ray shielding:With lead insert and special window.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264757.pdf&pg=10CE approval0TUV NORD10DIN18650-1 and DIN 18650-2 (2005 and 2010)10EN 12207 Class 2 Air permeability10ISO 9001: 2008

Tested for 1 million cycles SLX sliding door operators offer proven reliability as well as the integration of a number of technological advancements such as CanBus technology for enhanced operational safety and blue tooth wireless technology for easier access and control.

The SLX/D with its unique patented pivot mechanism is the ideal choice where air tight door and hands free access are a priority for guaranteed optimum hygiene or sound proofing. It is particularly suitable for doors in hospitals, operating rooms, laboratories, music rooms, pharmaceutical and food industries.

All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.

More about SLX/D Hermetically Sealed Automatic Sliding Door:
As standard - Options - Approvals - Further information.

PendingAUTOMATIC SLIDING DOOR:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
SLX/D Hermetically Sealed automatic Sliding Door.
 Door:
  -Configuration:
[Single Slide left].
[Single Slide right].
  -Clearance width:
[ ______ ] - 800–2000 mm; insert requirements.
  -Height:
[ ______ ] - 2100–2400 mm (optimum).
  -Finish:
[Formica high pressure laminate].
[Polished stainless steel].
[Perstop, RAL colour]. - Insert colour requirements.
 Inset window glazing:
[6 mm laminated safety glass].
[24 mm double glazed].
[Windows with UK absorbing foil materials].
 Sound insulation:
[ ______ ] - Up to 32 dB possible; consult manufacturer and insert requirements.
 X-Ray shielding:
[Not required].
[Required].
 Frame:
[Single]. - Made from aluminium profile sections.
[Double]. - Aluminium profile sections with intermediate section to match door wing.
 Control:
[D-Bedix hard wired control unit].
[F Key].
[Large optical push pad].


top ^

Guidance

for SLX/D Hermetically Sealed Automatic Sliding Door

from Gilgen Door Systems UK Ltd

More about SLX/D Hermetically Sealed Automatic Sliding Door: As standard - Options - Approvals - Further information.

As standard

Drive system:

  • SLX Sliding door drive unit with pivoting mechanism that enables the sliding wing to be simultaneously lowered and pressed against the door frame during the closing motion.
  • Integrates Bluetooth wireless control technology and powerful, near silent drive into a very slender profile. System components are connected via a CANbus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.

Safety:

  • Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.
  • Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.
  • Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.
  • Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)

Water resistance:

IP20 rating.

Operation:

24 V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open.

Power requirements:

230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.

Door panel weight (maximum):

120 kg.

Options

Control:

  • Portable Bedix wireless control unit: Designed to enable selection of operating modes and configure parameters. Simple menu based controls. No fixed location required. Password protected.
  • D-Bedix hard wired programming key pad with digital display. Designed for installing a central control panel. Configured or Automatic – Night – Exit – Open door operating modes.
  • F Key: Each unit can be programmed to restrict access to areas which normally need to be kept locked.

Operation:

  • Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals and voice message systems to assist partially sighted people and integrates with access control systems.

X-Ray shielding:

With lead insert and special window.

Approvals

  • CE approval .
  • TUV NORD .
  • British Standards Institution: DIN18650-1 and DIN 18650-2 (2005 and 2010). British Standards Institution
  • British Standards Institution: EN 12207 Class 2 Air permeability. British Standards Institution
  • British Standards Institution: ISO 9001: 2008. British Standards Institution

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of SLX/ PSX Bi-Parting Sliding Door System from Gilgen Door Systems UK LtdSLX Automatic Sliding Door System

Gilgen SLX sliding door operators are designed, constructed and installed to satisfy BS EN 16005:2012, and are tested for one million cycles, providing proven reliability. The operators also comply with Building Regulations (E&W) Approved Document B and M, The Equality Act 2010 and BS 8300:2009.The integration of a number of technological advancements such as CanBus technology for enhanced operational safety and bluetooth wireless technology for easier access and control ensure the doors are suitability for a wide variety of applications such as retail, hotels, offices, airports, stations, hospitals, schools, colleges, garden centres and leisure.All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.Door profile:40 mm thick.Drive system:SLX sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.Safety:Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)Operation:24 V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open. Power requirements:230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.Door leaf: - Width:Single sliding:Standard SLX drive: 700–2000 mm.Heavy duty SLX drive: 800–3000 mm.Heavy duty SLX drive with booster: 1100–3000 mm.Bi parting:Standard SLX drive: 800–3000 mm.Standard SLX drive with booster: 1000–3000 mm.Standard SLX drive dual motor: 1100–3000 mm.Heavy duty SLX drive dual motor: 1200–4000 mm.Standard SLX drive with break out: 1000–2500 mm. - Height:2000–3000 mm - Nominal depending upon location and door panel width and weight.- Weight:1 x 150 kg (standard SLX drive).1 x 240 kg (heavy duty SLX drive).1 x 400 kg (heavy duty SLX drive with booster).2 x 120 kg (standard SLX drive).2 x 150 kg (standard SLX drive plus booster or dual motor).2 x 240 kg (heavy duty SLX drive dual motor). - Configuration (break out solutions only):The bi-parting sliding door system with break out is designed to provide a convenient, barrier free access in day-to-day situations, while guaranteeing a safe exit for occupants and easy entry for emergency services in the event of a fire. In compliance with BS EN 16005 door leaves (or door set leaves and side screens) are capable of being broken out from any position in the direction of escape. The total force to release the break out function does not exceed 220 N.Rear door safety:Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are;900 mm high, firmly secured, solid glazed barrier, in accordance with BS EN 16005.2.5 m high, fully glazed pocket screen complying with BS EN 16005.Security:A key turn manual hook lock (with steel insert in the leading edge for improved security and strength) is included as standard however there are a range of options available such as in head electric locks and multi point locking for added security. Integration with access control systems is also achievable. Please consult manufacturer. Control:D Bedix hard wired programming key pad (incorporating digital display screen). Designed for installation in a central control panel. Configured for Automatic/ Manual/ Night/ Exit/ Open door operating modes.Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.F Key: Multi user, compact programmable portable unit enabling restricted personnel access.Six position key switch. Single point door control but with NO fault identification.Operation:Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals and voice message systems to assist partially sighted people and integrates with access control systems.Glazing:Single or double glazed with a range of U-values as low as 1.6 W/m²K.Tinted glazing.For added security glazing complete with bomb blast resistant film can readily be supplied.Glazing complete with etched in logos. Glazed fan lights.Door movement guide:Surface mounted fixed point guide enhances efficiency of door movement.Recessed floor track, helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain. Recessed floor track:Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain. Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL345157.pdf&pg=40CE approved0TUV NORD 10DIN18650-1 and DIN 18650-2 2005 and 201010ISO 9001: 2008

Gilgen SLX sliding door operators are designed, constructed and installed to satisfy BS EN 16005:2012, and are tested for one million cycles, providing proven reliability. The operators also comply with Building Regulations (E&W) Approved Document B and M, The Equality Act 2010 and BS 8300:2009.

The integration of a number of technological advancements such as CanBus technology for enhanced operational safety and bluetooth wireless technology for easier access and control ensure the doors are suitability for a wide variety of applications such as retail, hotels, offices, airports, stations, hospitals, schools, colleges, garden centres and leisure.

All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.

More about SLX Automatic Sliding Door System:
As standard - Options - Approvals - Further information.

PendingAUTOMATIC SLIDING DOOR:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
SLX Automatic Sliding Door System.
 Door:
  -Configuration:
[Bi-parting, no fixed panels].
[Bi-parting, two fixed glazed panels].
[Bi-parting with full emergency break out (doors and glazed screens)].
  -Clearance width:
[ ______ ] - 700–3000 mm single sliding; 800–4000 mm bi-parting; 1000–2500 mm bi-parting models with break out.
  -Height:
[ ______ ] - 2000–3000 mm; insert requirements.
  -Midrail:
[Not required].
[Required]. - Consult manufacturer for details.
 Finish:
[Polyester powder coated, RAL]. - Insert colour requirements.
[Silver anodized].
[Stainless steel cladding, brushed].
 Drive operation:
[Standard SLX].
[Standard SLX plus booster].
[Standard SLX drive plus dual motor].
 Glazing:
[ ______ ] - Installation specific; please consult manufacturer and insert requirements.
 Control:
[D Bedix hard wired control unit].
[F key].
[Kombi D Bedix].
 Activation:
[Integration with access control systems].
[Manual push pad].
[Motion sensors].
 Locking and security:
[ ______ ] - Installation specific; please consult manufacturer and insert requirements.
 Door movement guide:
[Recessed floor track]. - Not suitable if break out option required.
[Surface mounted fixed point guide].
 Rear door safety:
[ ______ ] - Installation specific please consult manufacturer.


top ^

Guidance

for SLX Automatic Sliding Door System

from Gilgen Door Systems UK Ltd

More about SLX Automatic Sliding Door System: As standard - Options - Approvals - Further information.

As standard

Door profile:

40 mm thick.

Drive system:

SLX sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.

Safety:

  • Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.
  • Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.
  • Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.
  • Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)

Operation:

24 V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open.

Power requirements:

230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.

Options

Door leaf:

- Width:

Single sliding:

  • Standard SLX drive: 700–2000 mm.
  • Heavy duty SLX drive: 800–3000 mm.
  • Heavy duty SLX drive with booster: 1100–3000 mm.

Bi parting:

  • Standard SLX drive: 800–3000 mm.
  • Standard SLX drive with booster: 1000–3000 mm.
  • Standard SLX drive dual motor: 1100–3000 mm.
  • Heavy duty SLX drive dual motor: 1200–4000 mm.
  • Standard SLX drive with break out: 1000–2500 mm.

- Height:

2000–3000 mm - Nominal depending upon location and door panel width and weight.

- Weight:

  • 1 x 150 kg (standard SLX drive).
  • 1 x 240 kg (heavy duty SLX drive).
  • 1 x 400 kg (heavy duty SLX drive with booster).
  • 2 x 120 kg (standard SLX drive).
  • 2 x 150 kg (standard SLX drive plus booster or dual motor).
  • 2 x 240 kg (heavy duty SLX drive dual motor).

- Configuration (break out solutions only):

The bi-parting sliding door system with break out is designed to provide a convenient, barrier free access in day-to-day situations, while guaranteeing a safe exit for occupants and easy entry for emergency services in the event of a fire. In compliance with BS EN 16005 door leaves (or door set leaves and side screens) are capable of being broken out from any position in the direction of escape. The total force to release the break out function does not exceed 220 N.

Rear door safety:

Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are;

  • 900 mm high, firmly secured, solid glazed barrier, in accordance with BS EN 16005.
  • 2.5 m high, fully glazed pocket screen complying with BS EN 16005.

Security:

A key turn manual hook lock (with steel insert in the leading edge for improved security and strength) is included as standard however there are a range of options available such as in head electric locks and multi point locking for added security. Integration with access control systems is also achievable. Please consult manufacturer.

Control:

  • D Bedix hard wired programming key pad (incorporating digital display screen). Designed for installation in a central control panel. Configured for Automatic/ Manual/ Night/ Exit/ Open door operating modes.
  • Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.
  • Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.
  • F Key: Multi user, compact programmable portable unit enabling restricted personnel access.
  • Six position key switch. Single point door control but with NO fault identification.

Operation:

Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals and voice message systems to assist partially sighted people and integrates with access control systems.

Glazing:

  • Single or double glazed with a range of U-values as low as 1.6 W/m²K.
  • Tinted glazing.
  • For added security glazing complete with bomb blast resistant film can readily be supplied.
  • Glazing complete with etched in logos.
  • Glazed fan lights.

Door movement guide:

  • Surface mounted fixed point guide enhances efficiency of door movement.
  • Recessed floor track, helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Recessed floor track:

Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Approvals

  • CE approved .
  • TUV NORD .
  • British Standards Institution: DIN18650-1 and DIN 18650-2 2005 and 2010. British Standards Institution
  • British Standards Institution: ISO 9001: 2008. British Standards Institution

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of SLX/ PSX Telescopic 2 Wing Sliding Door System from Gilgen Door Systems UK LtdSLX Telescopic Sliding Door System

Gilgen SLX telescopic sliding doors maximise the clear walk through width of entrances through extending door leafs. Achieving a wider opening than standard bi-parting doors they are ideal for high volumes of pedestrian traffic such as transport hubs. The design also helps to provide protection from draughts and conserve energy. Gilgen SLX operators are designed, constructed and installed to satisfy BS EN 16005:2012, and are tested for one million cycles, providing proven reliability. The operators also comply with Building Regulations (E&W) Approved Document B and M, The Equality Act 2010 and BS 8300:2009.The integration of a number of technological advancements such as CanBus technology for enhanced operational safety and Bluetooth wireless technology for easier access and control, ensure suitability for a wide variety of applications.All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.Door profile:40 mm thick.Drive system:SLX/ PSX sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender in profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.Safety:Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)Operation:24 VDC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open. Power requirements:230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.Door clearance width: – Single sliding, two wing:Standard SLX drive: 1100–3000 mm.Standard SLX drive plus booster: 1400–3000 mm. – Bi-parting, four wing:Standard SLX drive: 1200–4000 mm.Standard SLX drive plus booster: 1400–4000 mm.Standard SLX drive plus dual motor: 2050–4000 mm.Height:2000–3000 mm - Nominal depending upon location and door panel width and weight.Door panel weight:Standard drive: 2 x 120 kg.Standard drive plus booster: 2 x 150 kg.Standard SLX drive: 4 x 60 kg.Standard SLX drive plus booster or dual motor: 4 x 100 kg).Security:A key turn manual hook lock (with steel insert in the leading edge for improved security and strength) is included as standard however there are a range of options available such as in head electric locks and multi point locking for added security. Integration with access control systems is also achievable. Please consult manufacturer.Control:D Bedix hard wired programming key pad (incorporating digital display screen) designed for installation in a central control panel. Configured for automatic/ manual/ night/ exit/ open door operating modes. Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protectedKombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized accessF Key: Multi user, compact programmable portable unit enabling restricted personnel access.Six position key switch. Single point door control but with NO fault identificationOperation:Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals and voice message systems to assist partially sighted people and integrates with access control systems.Glazing:Single or double glazed with a range of U-values as low as 1.6 W/m²K.Tinted glazing.For added security glazing complete with bomb blast resistant film can readily be supplied.Glazing complete with etched in logos. Glazed fan lights.Door movement guide:Surface mounted fixed point guide enhances efficiency of door movement.Recessed floor track, helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain. 0CEApproved0TUV NORD10DIN18650-1 and DIN 18650-2 (2005 and 2010)10ISO 9001: 2008

Gilgen SLX telescopic sliding doors maximise the clear walk through width of entrances through extending door leafs. Achieving a wider opening than standard bi-parting doors they are ideal for high volumes of pedestrian traffic such as transport hubs. The design also helps to provide protection from draughts and conserve energy. Gilgen SLX operators are designed, constructed and installed to satisfy BS EN 16005:2012, and are tested for one million cycles, providing proven reliability. The operators also comply with Building Regulations (E&W) Approved Document B and M, The Equality Act 2010 and BS 8300:2009.

The integration of a number of technological advancements such as CanBus technology for enhanced operational safety and Bluetooth wireless technology for easier access and control, ensure suitability for a wide variety of applications.

All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.

More about SLX Telescopic Sliding Door System:
As standard - Options - Approvals - Further information.

PendingAUTOMATIC SLIDING DOOR:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
SLX Telescopic Sliding Door System.
 Door:
  -Configuration:
[Bi parting 4 leaf telescopic slide, no fixed panels].
[Bi parting 4 leaf telescopic slide, two fixed panels].
[Single sliding 2 leaf telescopic slide, no fixed panels].
  -Clearance width:
[ ______ ] - 2050–4000 mm; insert requirements.
  -Height:
[ ______ ] - 2100–3000 mm; insert requirements.
 Finish:
[Silver anodized].
[Polyester powder coated, RAL]. - Insert requirements.
[Stainless steel cladding, brushed].
 Drive operation:
[Standard SLX].
[Standard SLX plus booster].
[Standard SLX drive plus dual motor].
 Glazing:
[ ______ ] - Installation specific; please consult manufacturer and insert requirements.
 Control:
[D Bedix hard wired control unit].
[F key].
[Kombi D Bedix].
 Activation:
[Integration with access control systems].
[Manual push pad].
[Motion sensors].
 Locking and security:
[ ______ ] - Installation specific; please consult manufacturer and insert requirements.
 Door movement guide:
[Recessed floor track].
[Surface mounted fixed point guide].
 Rear door safety:
[Rear edge safety senors].


top ^

Guidance

for SLX Telescopic Sliding Door System

from Gilgen Door Systems UK Ltd

More about SLX Telescopic Sliding Door System: As standard - Options - Approvals - Further information.

As standard

Door profile:

40 mm thick.

Drive system:

SLX/ PSX sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender in profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.

Safety:

  • Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.
  • Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.
  • Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.
  • Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)

Operation:

24 VDC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open.

Power requirements:

230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.

Options

Door clearance width:

– Single sliding, two wing:

  • Standard SLX drive: 1100–3000 mm.
  • Standard SLX drive plus booster: 1400–3000 mm.

– Bi-parting, four wing:

  • Standard SLX drive: 1200–4000 mm.
  • Standard SLX drive plus booster: 1400–4000 mm.
  • Standard SLX drive plus dual motor: 2050–4000 mm.

Height:

2000–3000 mm - Nominal depending upon location and door panel width and weight.

Door panel weight:

  • Standard drive: 2 x 120 kg.
  • Standard drive plus booster: 2 x 150 kg.
  • Standard SLX drive: 4 x 60 kg.
  • Standard SLX drive plus booster or dual motor: 4 x 100 kg).

Security:

A key turn manual hook lock (with steel insert in the leading edge for improved security and strength) is included as standard however there are a range of options available such as in head electric locks and multi point locking for added security. Integration with access control systems is also achievable. Please consult manufacturer.

Control:

  • D Bedix hard wired programming key pad (incorporating digital display screen) designed for installation in a central control panel. Configured for automatic/ manual/ night/ exit/ open door operating modes.
  • Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected
  • Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access
  • F Key: Multi user, compact programmable portable unit enabling restricted personnel access.
  • Six position key switch. Single point door control but with NO fault identification

Operation:

Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals and voice message systems to assist partially sighted people and integrates with access control systems.

Glazing:

  • Single or double glazed with a range of U-values as low as 1.6 W/m²K.
  • Tinted glazing.
  • For added security glazing complete with bomb blast resistant film can readily be supplied.
  • Glazing complete with etched in logos.
  • Glazed fan lights.

Door movement guide:

  • Surface mounted fixed point guide enhances efficiency of door movement.
  • Recessed floor track, helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Approvals

  • CE: Approved.
  • TUV NORD .
  • British Standards Institution: DIN18650-1 and DIN 18650-2 (2005 and 2010). British Standards Institution
  • British Standards Institution: ISO 9001: 2008. British Standards Institution

Further Information

Literature:

RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of SLX/ PSW Energy Efficient Automatic Sliding Door System from Gilgen Door Systems UK LtdSLX/ PSW Energy Efficient Automatic Sliding Door System

Gilgen SLX sliding door operators are designed, constructed and installed to satisfy BS EN 16005:2012, and are tested for one million cycles, providing proven reliability. The operators also comply with Building Regulations (E&W) Approved Documents B and M of the Building Regulations (England and Wales), The Equality Act 2010 and BS 8300:2009.The thermally insulated PSW profile system has been successfully tested in accordance to BS EN 14351-2 thereby enabling energy efficient automatic doors that not only enable very low U-values (1.5 W/m²K) to be achieved but also provide air permeability Class 2 in accordance with BS EN 12207 and Class 5A water tightness in accordance with BS EN 12208.SLX / PSW are suitable for high volume, heavy duty, retail trade, hotels, offices, airports, stations, hospitals, schools, colleges, garden centres and leisure.All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.Drive system:SLX-M sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender in profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.Safety:Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)Operation:24V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open. Door weight:Single sliding doors: 1 x 150 kg.Bi-parting doors: 2 x 250 kg.Power requirements:230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.Rear door safety:Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are;900 mm high, firmly secured, solid glazed barrier, in accordance with BS EN 16005.2.5 m high, fully glazed pocket screen complying with BS EN 16005.Control:D Bedix hard wired programming key pad (incorporating digital display screen) designed for installation in a central control panel. Configured for automatic/ manual/ night/ exit/ open door operating modes.Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.F Key: Multi user, compact programmable portable unit enabling restricted personnel access.Six position key switch. Single point door control but with NO fault identification.Operation:Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals, voice message systems to assist partially sighted people and integrates with access control systems.Door movement guide:Surface mounted fixed point guide enhances efficiency of door movement.Recessed floor track: Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain. Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL345157.pdf&pg=50CE approval0TUV10Air permeability Class 2 in accordance with EN 1220710Class 5A water tightness in accordance with EN 12208

Gilgen SLX sliding door operators are designed, constructed and installed to satisfy BS EN 16005:2012, and are tested for one million cycles, providing proven reliability. The operators also comply with Building Regulations (E&W) Approved Documents B and M of the Building Regulations (England and Wales), The Equality Act 2010 and BS 8300:2009.

The thermally insulated PSW profile system has been successfully tested in accordance to BS EN 14351-2 thereby enabling energy efficient automatic doors that not only enable very low U-values (1.5 W/m²K) to be achieved but also provide air permeability Class 2 in accordance with BS EN 12207 and Class 5A water tightness in accordance with BS EN 12208.

SLX / PSW are suitable for high volume, heavy duty, retail trade, hotels, offices, airports, stations, hospitals, schools, colleges, garden centres and leisure.

All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.

More about SLX/ PSW Energy Efficient Automatic Sliding Door System:
As standard - Options - Approvals - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
SLX/ PSW Energy Efficient Automatic Sliding Door System.
 Door :
  -Configuration:
[Bi parting no fixed side panels].
[Bi parting two fixed side panels].
[Bi-parting, two fixed panels and fan light].
  -Clearance width:
[ ______ ] - 700–2000 mm (single sliding); 800–3000 mm (bi-parting).
  -Height:
[ ______ ] - 2100–3000 mm; insert requirements.
 Finish:
[Polyester powder coated, RAL]. - Insert colour requirements.
 Glazing:
[ ______ ] - Insulating glass, 24–50 mm thickness. Installation specific – please consult manufacturer and insert requirements.
  -Control:
[D Bedix hard wired control unit].
[F Key].
[Kombi D Bedix].
 Activation:
[Integration with access control systems].
[Manual push pad].
[Motion sensors].
 Locking and security:
[Standard].
[Multipoint].
 Door movement guide:
[Recessed floor track].
[Surface mounted fixed point guide].
 Rear door safety:
[ ______ ] - Installation specific please consult manufacturer.


top ^

Guidance

for SLX/ PSW Energy Efficient Automatic Sliding Door System

from Gilgen Door Systems UK Ltd

More about SLX/ PSW Energy Efficient Automatic Sliding Door System: As standard - Options - Approvals - Further information.

As standard

Drive system:

SLX-M sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender in profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.

Safety:

  • Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.
  • Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.
  • Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.
  • Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)

Operation:

24V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open.

Door weight:

  • Single sliding doors: 1 x 150 kg.
  • Bi-parting doors: 2 x 250 kg.

Power requirements:

230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.

Options

Rear door safety:

Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are;

  • 900 mm high, firmly secured, solid glazed barrier, in accordance with BS EN 16005.
  • 2.5 m high, fully glazed pocket screen complying with BS EN 16005.

Control:

  • D Bedix hard wired programming key pad (incorporating digital display screen) designed for installation in a central control panel. Configured for automatic/ manual/ night/ exit/ open door operating modes.
  • Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.
  • Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.
  • F Key: Multi user, compact programmable portable unit enabling restricted personnel access.
  • Six position key switch. Single point door control but with NO fault identification.

Operation:

Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals, voice message systems to assist partially sighted people and integrates with access control systems.

Door movement guide:

Surface mounted fixed point guide enhances efficiency of door movement.

Recessed floor track:

Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Approvals

  • CE approval .
  • TUV .
  • British Standards Institution: Air permeability Class 2 in accordance with EN 12207. British Standards Institution
  • British Standards Institution: Class 5A water tightness in accordance with EN 12208. British Standards Institution

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Kwikroll KR 212 from Gilgen Door Systems UK LtdKwikroll KR 212

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange.ApplicationInternal door for draft free zones – ideal for supermarket door between the store and the sales area ( max size 2000mm wide x 2500 mm ht)Features: Patented anti-crash system.Standard light grille and automatic emergency opening via a counterweight.Curtain thickness:Fabric curtain: 1.5 mm.Vision panel: 2.0 mm.Speed (inversion relay/ frequency converter controls):1.2/ 0.5 m/s.Wind protection: No performance determined – draft free zonesComponents: A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems including an integral light curtain as standard on this model.Dimensions:Width (maximum): 2000 mm.Height (maximum): 2500 mm.Finish: The fabric curtains are available in a range of colours and transparency, and the main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange.

More about Kwikroll KR 212:
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Kwikroll KR 212.
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Arrangement:
[Face fixed].
[Reveal fixed].
 Curtain colour:
[Not required].
[RAL 1018]. - Zinc yellow.
[RAL 2004]. - Pure orange.
 Frame/ Guides:
[Self finished galvanised steel]. - Manufacturer's standard.
[Brushed stainless steel V2 A].
[Polyester powder coated galvanised steel, coated RAL]. - Insert RAL colour reference.
 Operation:
[Geared motor drive with either inversion relay or frequency converter controls]. - Manufacturer's standard.
[Induction loop].
[Infrared movement and presence detector].
 Emergency operation:
Counter weight . - Manufacturers standard.
 Safety power operation:
[Contact safety edge and non-contact light curtain system]. - Standard.
[Secondary post mounted none contact safety beam].
[Stand-off presence sensing devices]. - To detect the presence of pedestrians approaching door zone.
 Outputs :
[None].
[Traffic lights].


top ^

Guidance

for Kwikroll KR 212

from Gilgen Door Systems UK Ltd

More about Kwikroll KR 212: As standard - Options - Further information.

As standard

Application

Internal door for draft free zones – ideal for supermarket door between the store and the sales area ( max size 2000mm wide x 2500 mm ht)

Features:

  • Patented anti-crash system.
  • Standard light grille and automatic emergency opening via a counterweight.

Curtain thickness:

Fabric curtain: 1.5 mm.

Vision panel: 2.0 mm.

Speed (inversion relay/ frequency converter controls):

1.2/ 0.5 m/s.

Wind protection:

No performance determined – draft free zones

Options

Components:

A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems including an integral light curtain as standard on this model.

Dimensions:

  • Width (maximum): 2000 mm.
  • Height (maximum): 2500 mm.

Finish:

The fabric curtains are available in a range of colours and transparency, and the main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.

Further Information

Literature:

RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Kwikroll KR 515 SE  from Gilgen Door Systems UK LtdKwikroll KR 515 SE

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange.ApplicationCost effective internal door with soft edge protection (max size: 5000 mm wide x 5000 mm height).Operation:Manufacturer's standard geared motor with frequency converter control for continuous door operation with low wear and long service life.Curtain thickness:Fabric: 1.5 mm.Vision panel: 2.0 mm.Speed (open - closing) options:0.8/ 0.8 m/s.1.0/ 0.5 m/s.1.5/0.8 m/s.Wind protection: Aluminium profile DIN EN 12424 Class 2.Components: A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems a both impact safety edges and secondary none contact safety beams supplied as standard on most models.Dimensions:Width (maximum): 5000 mm.Height (maximum): 5000 mm.Finish:The fabric curtains are available in a range of colours and transparency, and the main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.Emergency operation:Automated opening mode via an integrated UPS battery system in the event of a power failure.Health and Safety - Pedestrian Usage of High Speed Doors:The HSE recommends an electro-sensitive device such as an additional, post-mounted photocell positioned 0.9–1.0 m away from the door line, to the front and rear of the door, with barriers between the door and the posts to prevent pedestrians entering the unprotected area other than through the safety beam. Alternatively, active presence sensors can be used above the door head to provide threshold safety zones.

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange.

More about Kwikroll KR 515 SE :
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Kwikroll KR 515 SE.
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Arrangement:
[Face fixed].
[Reveal fixed].
 Curtain colour:
[RAL 1018]. - Zinc yellow.
[RAL 2004]. - Pure orange.
[RAL 3002]. - Carmine Red
 Frame/ Guides:
[Manufacturer's standard - self finish galvanised steel].
[Brushed stainless steel V2 A].
[Polyester powder coated galvanised steel, coated RAL]. - Insert RAL colour reference.
 Operation:
[Geared motor with frequency converter control]. - Manufacturer's standard.
[Induction loop].
[Infrared movement and presence detector].
 Emergency operation:
[High level hand crank]. - Manufacturer's standard.
[Automatic opening via UPS during power failure].
 Safety (power operation):
[Contact safety edge and non-contact safety beam]. - Manufacturer's standard.
[Non-contact light curtains].
[Secondary post mounted non-contact safety beam].
 Outputs :
[None].
[Traffic lights].


top ^

Guidance

for Kwikroll KR 515 SE

from Gilgen Door Systems UK Ltd

More about Kwikroll KR 515 SE : As standard - Options - Further information.

As standard

Application

Cost effective internal door with soft edge protection (max size: 5000 mm wide x 5000 mm height).

Operation:

Manufacturer's standard geared motor with frequency converter control for continuous door operation with low wear and long service life.

Curtain thickness:

  • Fabric: 1.5 mm.
  • Vision panel: 2.0 mm.

Speed (open - closing) options:

  • 0.8/ 0.8 m/s.
  • 1.0/ 0.5 m/s.
  • 1.5/0.8 m/s.

Wind protection:

Aluminium profile DIN EN 12424 Class 2.

Options

Components:

A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems a both impact safety edges and secondary none contact safety beams supplied as standard on most models.

Dimensions:

  • Width (maximum): 5000 mm.
  • Height (maximum): 5000 mm.

Finish:

The fabric curtains are available in a range of colours and transparency, and the main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.

Emergency operation:

Automated opening mode via an integrated UPS battery system in the event of a power failure.

Health and Safety - Pedestrian Usage of High Speed Doors:

The HSE recommends an electro-sensitive device such as an additional, post-mounted photocell positioned 0.9–1.0 m away from the door line, to the front and rear of the door, with barriers between the door and the posts to prevent pedestrians entering the unprotected area other than through the safety beam. Alternatively, active presence sensors can be used above the door head to provide threshold safety zones.

Further Information

Literature:

RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Kwikroll KR 530 SE  from Gilgen Door Systems UK LtdKwikroll KR 530 SE

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange. Application:Normal traffic flow situations inside for draft exposed environments (max size 5000 mm wide x 5000 mm height)Special features:Quiet and quiet operation.Curtain thickness:Fabric: 1.5 mm.Vision panel: 2.0 mm.Speed ( open – close) options :0.8/0.8 m/s.1.0/0.5 m/s.2.0/0.8 m/s.3.0 / 0.8 m/s.Wind protection: Spring steel wind protectors - draft exposed environments.Components: A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems a both impact safety edges and secondary none contact safety beams supplied as standard on most models.Dimensions:Width (maximum): 5000 mm.Height (maximum): 5000 mm.Finish: The fabric curtains are available in a range of colours and transparency, and the main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.Emergency operation:Automated opening mode via an integrated UPS battery system in the event of a power failure.Health & Safety: Pedestrian Usage of High Speed Doors:The HSE recommends an electro- sensitive device such as an additional post mounted photocell positioned no LESS than 0.9m and no greater than 1m away from the door line , to the front and rear of the door, with barriers between the door and the posts to prevent pedestrians entering the unprotected area other than through the safety beam. Alternatively active presence sensors can be used above the door head to provide threshold safety zones.

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange.

More about Kwikroll KR 530 SE :
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Kwikroll KR 530 SE.
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Arrangement:
[Face fixed].
[Reveal fixed].
 Curtain colour:
[RAL 1018]. - Zinc yellow.
[RAL 2004]. - Pure orange.
[RAL 3002]. - Carmine Red
 Frame/ Guides:
[Manufacturer's standard self finished galvanised steel].
[Brushed stainless steel V2 A].
[Polyester powder coated galvanised steel, coated RAL]. - Insert RAL colour reference.
 Operation:
[Manufacturer's standard Geared motor with optional frequency converter control].
[2 push button (open/ close) ].
[3 push button (open/ stop/ close)].
 Emergency operation:
[High level hand crank]. - Manufacturers standard.
[Automatic opening via UPS during power failure].
 Safety (power operation):
[Contact safety edge and non-contact safety beam]. - Standard.
[Secondary post mounted non-contact safety beam].
[Stand-off presence sensing devices]. - To detect the presence of pedestrians approaching door zone.
 Outputs :
[None].
[Traffic lights].


top ^

Guidance

for Kwikroll KR 530 SE

from Gilgen Door Systems UK Ltd

More about Kwikroll KR 530 SE : As standard - Options - Further information.

As standard

Application:

Normal traffic flow situations inside for draft exposed environments (max size 5000 mm wide x 5000 mm height)

Special features:

Quiet and quiet operation.

Curtain thickness:

  • Fabric: 1.5 mm.
  • Vision panel: 2.0 mm.

Speed ( open – close) options :

  • 0.8/0.8 m/s.
  • 1.0/0.5 m/s.
  • 2.0/0.8 m/s.
  • 3.0 / 0.8 m/s.

Wind protection:

Spring steel wind protectors - draft exposed environments.

Options

Components:

A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems a both impact safety edges and secondary none contact safety beams supplied as standard on most models.

Dimensions:

  • Width (maximum): 5000 mm.
  • Height (maximum): 5000 mm.

Finish:

The fabric curtains are available in a range of colours and transparency, and the main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.

Emergency operation:

Automated opening mode via an integrated UPS battery system in the event of a power failure.

Health & Safety: Pedestrian Usage of High Speed Doors:

The HSE recommends an electro- sensitive device such as an additional post mounted photocell positioned no LESS than 0.9m and no greater than 1m away from the door line , to the front and rear of the door, with barriers between the door and the posts to prevent pedestrians entering the unprotected area other than through the safety beam. Alternatively active presence sensors can be used above the door head to provide threshold safety zones.

Further Information

Literature:

RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Kwikroll KR 615 TR from Gilgen Door Systems UK LtdKwikroll KR 615 TR

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange.A fully transparent curtain which ensures safe transport routes and good visual contact from distance.Application:Normal traffic flow situations both inside and outside with maximum visual contact from afar (maximum size 6000 mm wide x 5000 mm high).Curtain thickness:Fully transparent: 4.0 mm with RED safety stripesSpeed ( open – close) options :0.8/ 0.8 m/s.* 1.0/ 0.5 m/s.1.5/ 0.8 m/s.* Max size restricted to 3500 mm wide x 3500 mm high.Wind protection: Aluminium wind protection profiles – DINEN 12424 – Class 3 (with two wind protectors – up to 60 Km/ h).Components: A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems a both impact safety edges and secondary none contact safety beams supplied as standard on most models.Dimensions:Width (maximum): 6000 mm.Height (maximum): 5000 mm.Finish: The main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.Emergency operation:Motor mounted emergency hand chain system Health and Safety - Pedestrian Usage of High Speed Doors:The HSE recommends an electro-sensitive device such as an additional post mounted photocell positioned 0.9–1.0 m away from the door line, to the front and rear of the door, with barriers between the door and the posts to prevent pedestrians entering the unprotected area other than through the safety beam. Alternatively active presence sensors can be used above the door head to provide threshold safety zones.

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange.

More about Kwikroll KR 615 TR:
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Kwikroll KR 615 TR.
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Arrangement:
[Face fixed].
[Reveal fixed].
 Curtain:
[Fully transparent 4mm thick].
 Colour:
[Transparent]. - Manufacturer's standard.
 Frame/ Guides:
[Self finished galvanised steel]. - Manufacturer's standard.
[Brushed stainless steel V2 A].
[Polyester powder coated galvanised steel, coated RAL]. - Insert RAL colour reference.
 Operation:
[Geared motor with optional frequency converter control]. - Manufacturer’s standard.
[Induction loop].
[Infrared movement and presence detector].
 Emergency operation:
[Manufacturers standard – high level hand crank].
[Optional – Automatic opening via UPS during power failure].
 Safety (power operation):
[Contact safety edge and non-contact safety beam]. - Standard.
[Secondary post mounted non-contact safety beam].
[Stand-off presence sensing devices]. - To detect the presence of pedestrians approaching door zone.
 Outputs :
[None].
[Traffic lights].


top ^

Guidance

for Kwikroll KR 615 TR

from Gilgen Door Systems UK Ltd

More about Kwikroll KR 615 TR: As standard - Options - Further information.

As standard

A fully transparent curtain which ensures safe transport routes and good visual contact from distance.

Application:

Normal traffic flow situations both inside and outside with maximum visual contact from afar (maximum size 6000 mm wide x 5000 mm high).

Curtain thickness:

Fully transparent: 4.0 mm with RED safety stripes

Speed ( open – close) options :

  • 0.8/ 0.8 m/s.
  • * 1.0/ 0.5 m/s.
  • 1.5/ 0.8 m/s.
  • * Max size restricted to 3500 mm wide x 3500 mm high.

Wind protection:

Aluminium wind protection profiles – DINEN 12424 – Class 3 (with two wind protectors – up to 60 Km/ h).

Options

Components:

A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems a both impact safety edges and secondary none contact safety beams supplied as standard on most models.

Dimensions:

  • Width (maximum): 6000 mm.
  • Height (maximum): 5000 mm.

Finish:

The main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.

Emergency operation:

Motor mounted emergency hand chain system

Health and Safety - Pedestrian Usage of High Speed Doors:

The HSE recommends an electro-sensitive device such as an additional post mounted photocell positioned 0.9–1.0 m away from the door line, to the front and rear of the door, with barriers between the door and the posts to prevent pedestrians entering the unprotected area other than through the safety beam. Alternatively active presence sensors can be used above the door head to provide threshold safety zones.

Further Information

Literature:

RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Kwikroll KR 6030 SE  from Gilgen Door Systems UK LtdKwikroll KR 6030 SE

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange.Application:High frequency transport flow situations inside or outside.Curtain thickness:Fabric: 1.5 mm.Vision panel: 2.0 mm.Speed ( open – close) options :0.8/ 0.8 m/s.* 1.0/ 0.5 m/s.2.0/0.8 m/s.3.0/ 0.8 m/s.* Maximum door size 4000 mm wide x 4000 mm high.Wind protection: Spring steel wind protectors with twin track rollers and side tensioning system – DIN EN 12424 Class 2 ( up to 70 km/h).Components: A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems a both impact safety edges and secondary none contact safety beams supplied as standard on most models.Dimensions:Width (maximum): 5000 mm.Height (maximum): 6000 mm.Finish:The fabric curtains are available in a range of colours and transparency, and the main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.Emergency operation:Optional – Automatic opening via UPS during power failure.Optional – Counter weight with battery back up.Emergency motor mounted hand chain system. Automated opening mode via an integrated UPS battery system in the event of a power failure.Health and Safety - Pedestrian Usage of High Speed Doors:The HSE recommends an electro-sensitive device such as an additional post-mounted photocell positioned 0.9–1.0 m from the door line, to the front and rear of the door, with barriers between the door and the posts to prevent pedestrians entering the unprotected area other than through the safety beam. Alternatively, active presence sensors can be used above the door head to provide threshold safety zones.

Gilgen Kwikroll is a range of high speed vertical rolling fabric doors for low security and internal or external applications. They are always supplied with power operation for automated use and are specifically designed for vehicle flow solutions to enable frequent use and minimize environmental exchange.

More about Kwikroll KR 6030 SE :
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Kwikroll KR 6030 SE.
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Arrangement:
[Face fixed].
[Reveal fixed].
 Curtain colour:
[RAL 1018]. - Zinc yellow.
[RAL 2004]. - Pure orange.
[RAL 3002]. - Carmine Red
 Frame/ Guides:
[Self finished galvanised steel]. - Manufacturer's standard.
[Polyester powder coated galvanised steel, coated RAL]. - Insert RAL colour reference.
 Operation:
[Geared motor with optional frequency converter control ]. - Manufacturer's standard.
[Induction loop].
[Infrared movement and presence detector].
 Emergency operation :
[High level hand crank]. - Manufacturer's standard.
[Automatic opening via UPS during power failure].
[Counter weight with battery back up ].
 Safety (powder operation):
[Contact safety edge and non-contact safety beam]. - Manufacturer's standard.
[Secondary post mounted non-contact safety beam].
[Stand-off presence sensing devices]. - To detect the presence of pedestrians approaching door zone.
 Outputs :
[None].
[Traffic lights].


top ^

Guidance

for Kwikroll KR 6030 SE

from Gilgen Door Systems UK Ltd

More about Kwikroll KR 6030 SE : As standard - Options - Further information.

As standard

Application:

High frequency transport flow situations inside or outside.

Curtain thickness:

  • Fabric: 1.5 mm.
  • Vision panel: 2.0 mm.

Speed ( open – close) options :

  • 0.8/ 0.8 m/s.
  • * 1.0/ 0.5 m/s.
  • 2.0/0.8 m/s.
  • 3.0/ 0.8 m/s.
  • * Maximum door size 4000 mm wide x 4000 mm high.

Wind protection:

Spring steel wind protectors with twin track rollers and side tensioning system – DIN EN 12424 Class 2 ( up to 70 km/h).

Options

Components:

A selection of drive and control systems, flexible curtain fabrics and compositions are offered to suit different applications. Electric operation is with a range of motors and controls for both 240v single phase and 400v 3 phase supplies. A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Reliable operation and safety in use are of high priority with safety systems a both impact safety edges and secondary none contact safety beams supplied as standard on most models.

Dimensions:

  • Width (maximum): 5000 mm.
  • Height (maximum): 6000 mm.

Finish:

The fabric curtains are available in a range of colours and transparency, and the main metal work structure and optional casings are normally a galvanised self finish, but optional polyester powder coat finishes and special stainless steel materials can be supplied.

Emergency operation:

  • Optional – Automatic opening via UPS during power failure.
  • Optional – Counter weight with battery back up.
  • Emergency motor mounted hand chain system.
  • Automated opening mode via an integrated UPS battery system in the event of a power failure.

Health and Safety - Pedestrian Usage of High Speed Doors:

The HSE recommends an electro-sensitive device such as an additional post-mounted photocell positioned 0.9–1.0 m from the door line, to the front and rear of the door, with barriers between the door and the posts to prevent pedestrians entering the unprotected area other than through the safety beam. Alternatively, active presence sensors can be used above the door head to provide threshold safety zones.

Further Information

Literature:

RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Rolegard Commercial Shutters/ Grilles from Gilgen Door Systems UK LtdRolegard Commercial Shutters/ Grilles

The Rolegard series of steel and aluminium shutters and grilles has been specifically designed for internal and external use. The Rolegard range allows for manual or electric operation, vision, ventilation or insulation panels and a full range of finishes, offering flexibility of design and functionality to suit individual needs. Rolegard shutters and grilles are suitable for a multitude of commercial applications such as high street frontages, leisure facilities, offices, counter-top protection, stadiums, shopping centres, warehouses and car parks.Arrangement:Face fixed.Product reference:A wide range of models are available: - Rolegard Aluminium Punched and Glazed:A higher level of security whilst retaining good vision and light levels.Often a mix of solid and punched lath is used to provide extra integrity. - Rolegard Polycarbonate:Maximum vision is available with this innovative shutter. - Rolegard Steel Perforated Lath:High levels of security are provided by this steel shutter. - Rolegard Solid Shutters:The range of solid shutters meets the need for out-of-hours security with a choice of profiles.Installation is at worst discreet, and in the case of new builds, invisible until lowered.Sympathetic finishes ensure the shutters blend well with other architectural elements.Single and twin walled aluminium lath is employed to provide increasing levels of security.Finish:The standard finish is silver anodized aluminium or standard polyester powder coat colours and galvanized steel (perforated shutter).Additional non-standard polyester powder coat colours are also available for aluminium and steel shutters which may be incorporated to various exposed as required by the application.A number of special finishes are available for aluminium including marble together with a range of woodgrain effects.Operation: - Manual, Hand:Push up to open, pull down to close - ideal for small openings and infrequent use. - Standard Electrical:Size (w x h, maximum) 6000 x 4800 mm x approximately 20 m² - check with Kaba technical if near limits. Note special large sizes can be designed if required; contact Kaba technical department.Open and close using buttons (standard) or optional activation.In the event of power failure, the operator allows for easy manual operation, with the emergency hand chain drive or hand crank.Three phase external (415 volts) and single phase tubular (240 volts) operators with a range of control options are available.Drive: - Rolegard CS Internal Drive:Internal drive system uses either spring, rod crank or a tubular motor mounted within the shutter barrel.Sideroom and headroom requirements are kept to a minimum resulting in a very compact and neat installation.The system can be employed effectively across the range of shutters. - Rolegard CS External Drive:Applied to the larger shutter sizes and those applications where space is more generous or the shutter requires a heavier grade drive system. Alternatively the technically advanced KOAX™ drive system can be used.Automation and control:The range of control options is versatile enough to meet most applications.Safety (power operation):A range of safety systems are available.Manufacturer's standard - Push button/ key switch - impulse/ deadman operation.Remote control doors (minimum requirements), impact sensitive safety edge or additional secondary none contact safety beam.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=3

The Rolegard series of steel and aluminium shutters and grilles has been specifically designed for internal and external use. The Rolegard range allows for manual or electric operation, vision, ventilation or insulation panels and a full range of finishes, offering flexibility of design and functionality to suit individual needs. Rolegard shutters and grilles are suitable for a multitude of commercial applications such as high street frontages, leisure facilities, offices, counter-top protection, stadiums, shopping centres, warehouses and car parks.

More about Rolegard Commercial Shutters/ Grilles:
As standard - Options - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
[Rolegard Aluminium Punched and Glazed Shutter].
[Rolegard Polycarbonate Shutter].
[Rolegard Steel Perforated Lath Shutter].
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Shutter curtain:
  -Type:
[Aluminium].
[Galvanized steel].
  -Finish:
[Self-finished - galvanized steel].
[Self finish - silver anodized aluminium].
[Polyester powder coated].
  -Colour:
[Not applicable].
[BS]. - Insert BS colour reference.
[RAL]. - Insert RAL colour reference.
 Side guides:
[Heavy duty].
[High security ].
 Seals:
[Side guide seals]. - Aluminium only.
[Bottom seals]. - All specs.
 Operation:
[Manual, hand operation].
[Manual, hand crank operation]. - Aluminium models only.
[Electrical, single phase].
 Drive:
[Rolegard CS external].
[Rolegard CS internal].
 Control:
[Not required]. - Manual operation.
[Push button / key switch].
[Card reader / remote control].
 Safety (power operation):
[Standard ].
[Contact safety edge].
[None contact safety beam].
 Other requirements:
[None].
[Key operated centre lock].
[Padlockable bottom shoot bolt].


top ^

Guidance

for Rolegard Commercial Shutters/ Grilles

from Gilgen Door Systems UK Ltd

More about Rolegard Commercial Shutters/ Grilles: As standard - Options - Further information.

As standard

Arrangement:

Face fixed.

Options

Product reference:

A wide range of models are available:

- Rolegard Aluminium Punched and Glazed:

  • A higher level of security whilst retaining good vision and light levels.
  • Often a mix of solid and punched lath is used to provide extra integrity.

- Rolegard Polycarbonate:

Maximum vision is available with this innovative shutter.

- Rolegard Steel Perforated Lath:

High levels of security are provided by this steel shutter.

- Rolegard Solid Shutters:

  • The range of solid shutters meets the need for out-of-hours security with a choice of profiles.
  • Installation is at worst discreet, and in the case of new builds, invisible until lowered.
  • Sympathetic finishes ensure the shutters blend well with other architectural elements.
  • Single and twin walled aluminium lath is employed to provide increasing levels of security.

Finish:

  • The standard finish is silver anodized aluminium or standard polyester powder coat colours and galvanized steel (perforated shutter).
  • Additional non-standard polyester powder coat colours are also available for aluminium and steel shutters which may be incorporated to various exposed as required by the application.
  • A number of special finishes are available for aluminium including marble together with a range of woodgrain effects.

Operation:

- Manual, Hand:

Push up to open, pull down to close - ideal for small openings and infrequent use.

- Standard Electrical:

  • Size (w x h, maximum) 6000 x 4800 mm x approximately 20 m² - check with Kaba technical if near limits. Note special large sizes can be designed if required; contact Kaba technical department.
  • Open and close using buttons (standard) or optional activation.
  • In the event of power failure, the operator allows for easy manual operation, with the emergency hand chain drive or hand crank.
  • Three phase external (415 volts) and single phase tubular (240 volts) operators with a range of control options are available.

Drive:

- Rolegard CS Internal Drive:

  • Internal drive system uses either spring, rod crank or a tubular motor mounted within the shutter barrel.
  • Sideroom and headroom requirements are kept to a minimum resulting in a very compact and neat installation.
  • The system can be employed effectively across the range of shutters.

- Rolegard CS External Drive:

Applied to the larger shutter sizes and those applications where space is more generous or the shutter requires a heavier grade drive system. Alternatively the technically advanced KOAX™ drive system can be used.

Automation and control:

The range of control options is versatile enough to meet most applications.

Safety (power operation):

A range of safety systems are available.

  • Manufacturer's standard - Push button/ key switch - impulse/ deadman operation.
  • Remote control doors (minimum requirements), impact sensitive safety edge or additional secondary none contact safety beam.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Firetex 60 CDO from Gilgen Door Systems UK LtdFiretex 60 CDO

A power operated steel single-skinned fire resistant automatic vertical shutter consisting of concave, solid profiles. Offers good security and fire resistance with a lighter duty material construction than the larger Firetex 240 model. Fire performance to DIN 4102: Door section element materials are Class A2 (non-flammable) and have been tested and assessed to provide maximum 1 hour resistance in accordance with BS 476-22. Gilgen commercial duty, electrically operated steel fire resistant vertical rolling shutter doors are designed for small apertures in industrial and commercial applications and are suitable for automatic internal fire compartmentation functions. Manufactured with 75 mm deep galvanized steel scroll lath curtain, galvanized steel ‘L’ shaped bottom rail and channel profiled vertical side guides. The main head assembly comprises of mild steel primed end plates and angle fixing brackets, tubular rotating barrel assembly complete with a three sided chamfered hood casing formed from galvanized sheet steel. The product is specifically designed for low cycle usage and is generally intended to be normally left in the open position for automatic activation in the event of a fire alarm signal, or closed on a daily basis for loss prevention/ security purposes. Weight of whole door assembly (static load): 30 kgs/m². Performance:Environmental ingress protection level (motor & controls): No performance determined – use in dry, dust free environments only.Motor Drive duty rating: Class S3 – 30 %.Fire resistance in accordance with BS 476-22: 1 hour.Fire performance to DIN 4102: Door section element materials Class A2 (non-flammable). CE Marked with manufacturer's declaration of conformity.Arrangement: Face fixed.Shutter curtain: Solid, 75 mm concaved, single skinned, galvanized, cold rolled steel.Finish as delivered: Self-coloured, hot dipped zinc coated steel, type G275 coating, grade Z2 bending and profiling quality.Operation: Electrically operated by means of a 1 phase - 240 volt motor unit c/w an integral manual controlled descent system (CDO) for use in the event of manual operation and automatic fire activation by means of an electro – mechanical solenoid unit with a secondary failsafe heat activated fusible link. The drive unit is mounted external to the drive barrel and head hood casing. Mains power required: 1 phase, neutral & earth 24O volt ac 10 amp terminating in a suitable isolator to suit the environment. This should be positioned on the motor side of the door and within 1 m of the opening and at high level adjacent to the motor drive unit, unless otherwise agreed.Control: Pre-wired low level push button station with open, close and emergency stop functions. Fire Activation Systems: Auto reset solenoid unit with manual test & reset cables and secondary gravity fail safe fusible link. Safety Options: Impulse or remote fire activation; additional photo cell safety beam with Firegard E control system Audible/ visual/ voice warning devices.Dimensions:Maximum area: 5 m².Width x height (maximum): 3350 x 2000 mm.Finish: Optional polyester powder coat finish can be supplied to the whole or part of the door assemblies.Colour (polyester powder coated finish): Many RAL or BS 4800 none metallic ranges are available as standard - other colours can be provided.Fire Activation Systems:A comprehensive range of fire activation systems with auxiliary audible/ visual and safety devices are available to accommodate a range of fire strategies, including but not limited to local heat detection, electro mechanical solenoid units for linking to the main building fire alarm with either manual reset and test cables or fully automatic electrical reset function, optional Firegard interface panels with fault monitoring, LED status lights, key switch fire test facilities, automatic power detection for either power driven or manual controlled descent closure with options for delayed activation with two stage closing sequence.Safety Options:Standard:Impulse / or remote fire activation, additional photo cell safety beam with Firegard E control system., Dead man operation and gravity failsafe closing on mains failureIn addition to standard - Time delay closing with either fire interface panel or Firegard E control systemIn addition to standard - Time delay closing and two stage closing with Firegard E control systemIn addition to standard - additional photo cell safety beam with Firegard E control system Audible / visual/ voice warning devices. Ironmongery: It is not normal practice to supply secondary locking devices on life safety equipment.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=5

A power operated steel single-skinned fire resistant automatic vertical shutter consisting of concave, solid profiles. Offers good security and fire resistance with a lighter duty material construction than the larger Firetex 240 model. Fire performance to DIN 4102: Door section element materials are Class A2 (non-flammable) and have been tested and assessed to provide maximum 1 hour resistance in accordance with BS 476-22.

Gilgen commercial duty, electrically operated steel fire resistant vertical rolling shutter doors are designed for small apertures in industrial and commercial applications and are suitable for automatic internal fire compartmentation functions. Manufactured with 75 mm deep galvanized steel scroll lath curtain, galvanized steel ‘L’ shaped bottom rail and channel profiled vertical side guides. The main head assembly comprises of mild steel primed end plates and angle fixing brackets, tubular rotating barrel assembly complete with a three sided chamfered hood casing formed from galvanized sheet steel.

The product is specifically designed for low cycle usage and is generally intended to be normally left in the open position for automatic activation in the event of a fire alarm signal, or closed on a daily basis for loss prevention/ security purposes.

More about Firetex 60 CDO:
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Firetex 60 CDO.
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Arrangement:
[Face fixed].
 Finish/ Colour:
[Manufacturer's standard].
[Polyester powder coat, BS 4800]. - Insert colour reference.
[Polyester powder coat, RAL]. - Insert RAL colour reference.
 Frame/ Guides:
[2.6 mm thick galvanized steel side guides].
[4 > 6 mm thick, mild steel BZP steel end plate anchor brackets].
 Operation/ Fire Activation:
[Manufacturer's standard].
[Electro mechanical solenoid units with fully automatic reset].
[Firegard alarm interface panel].
 Control:
[Manufacturer's standard].
[Low level sprung loaded key switch].
 Safety :
[Manufacturers standard].
[In addition to standard - for use with operation type b-d above - safety infrared photocell]. - See Options and insert requirements.
 Accessories:
[Not required].
[Removable motor cover]. - Optional to the standard head casing cover.


top ^

Guidance

for Firetex 60 CDO

from Gilgen Door Systems UK Ltd

More about Firetex 60 CDO: As standard - Options - Further information.

As standard

Weight of whole door assembly (static load):

30 kgs/m².

Performance:

  • Environmental ingress protection level (motor & controls): No performance determined – use in dry, dust free environments only.
  • Motor Drive duty rating: Class S3 – 30 %.
  • Fire resistance in accordance with BS 476-22: 1 hour.
  • Fire performance to DIN 4102: Door section element materials Class A2 (non-flammable). CE Marked with manufacturer's declaration of conformity.

Arrangement:

Face fixed.

Shutter curtain:

Solid, 75 mm concaved, single skinned, galvanized, cold rolled steel.

Finish as delivered:

Self-coloured, hot dipped zinc coated steel, type G275 coating, grade Z2 bending and profiling quality.

Operation:

Electrically operated by means of a 1 phase - 240 volt motor unit c/w an integral manual controlled descent system (CDO) for use in the event of manual operation and automatic fire activation by means of an electro – mechanical solenoid unit with a secondary failsafe heat activated fusible link. The drive unit is mounted external to the drive barrel and head hood casing.

Mains power required:

1 phase, neutral & earth 24O volt ac 10 amp terminating in a suitable isolator to suit the environment. This should be positioned on the motor side of the door and within 1 m of the opening and at high level adjacent to the motor drive unit, unless otherwise agreed.

Control:

Pre-wired low level push button station with open, close and emergency stop functions.

Fire Activation Systems:

Auto reset solenoid unit with manual test & reset cables and secondary gravity fail safe fusible link.

Safety Options:

Impulse or remote fire activation; additional photo cell safety beam with Firegard E control system Audible/ visual/ voice warning devices.

Options

Dimensions:

  • Maximum area: 5 m².
  • Width x height (maximum): 3350 x 2000 mm.

Finish:

Optional polyester powder coat finish can be supplied to the whole or part of the door assemblies.

Colour (polyester powder coated finish):

Many RAL or BS 4800 none metallic ranges are available as standard - other colours can be provided.

Fire Activation Systems:

A comprehensive range of fire activation systems with auxiliary audible/ visual and safety devices are available to accommodate a range of fire strategies, including but not limited to local heat detection, electro mechanical solenoid units for linking to the main building fire alarm with either manual reset and test cables or fully automatic electrical reset function, optional Firegard interface panels with fault monitoring, LED status lights, key switch fire test facilities, automatic power detection for either power driven or manual controlled descent closure with options for delayed activation with two stage closing sequence.

Safety Options:

Standard:

Impulse / or remote fire activation, additional photo cell safety beam with Firegard E control system., Dead man operation and gravity failsafe closing on mains failure

In addition to standard - Time delay closing with either fire interface panel or Firegard E control system

In addition to standard - Time delay closing and two stage closing with Firegard E control system

In addition to standard - additional photo cell safety beam with Firegard E control system Audible / visual/ voice warning devices.

Ironmongery:

It is not normal practice to supply secondary locking devices on life safety equipment.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Firetex 60 Tubular Motor from Gilgen Door Systems UK LtdFiretex 60 Tubular Motor

A power operated steel single-skinned fire resistant automatic vertical shutter consisting of concave, solid profiles. Offers good security and fire resistance with a lighter duty material construction than the larger Firetex 240 model and the additional benefit of a concealed electric motor drive system Fire performance to DIN 4102: Door section element materials are Class A2 (non-flammable) and have been tested and assessed to provide maximum 1 hour resistance in accordance with BS 476-22. Gilgen commercial duty, electrically operated steel fire resistant vertical rolling shutter doors are designed for small apertures in industrial and commercial applications and are suitable for automatic internal fire compartmentation functions. Manufactured with 75 mm deep galvanized steel scroll lath curtain, galvanized steel ‘L’ shaped bottom rail and channel profiled vertical side guides. The main head assembly comprises of mild steel primed end plates and angle fixing brackets, tubular rotating barrel assembly complete with a three sided chamfered hood casing formed from 20 swg galvanized sheet steel. Weight of whole door assembly (static load): 30 kgs/m². Performance:Environmental ingress protection level (motor & controls): No performance determined - use in dry, dust free environments only.Motor Drive duty rating: Class S3, 30 %.Fire resistance in accordance with BS 476-22: 1 hour.Fire performance to DIN 4102: Door section element materials Class A2 (non-flammable). CE Marked with manufacturer's declaration of conformity.Arrangement: Face fixed vertical roller shutter.Shutter curtain: Solid, 75 mm concaved, single skinned, galvanized, cold rolled steel.Operation: Power operation of the door is provided by a 230 v1ph tubular motor, which is discreetly fitted within the door roller-barrel. The system also comprises a control panel combining an un-interruptible power supply and the operation interface for normal and fire operation. The product is specifically designed for low cycle usage and is generally intended to be normally left in the open position for automatic activation in the event of a fire alarm signal, or closed on a daily basis for loss prevention/ security purposes. Fire Activation Systems: On receipt of the fire signal, the control panel will send a signal to close the door under power. During Fire operation the key switch or rocker switch are isolated to ensure closure of the door cannot be inhibited. Central to the operation is the fact that power for the system is maintained even in the event of mains failure. System power is ensured by the integral back up power circuit that incorporates sealed batteries and a trickle charger. Should mains power fail during fire operation there is sufficient system power to close the door. The control panel is provided with diagnostic LEDs mounted on the front of the enclosure. These indicate 'Mains operation', 'Battery operation' and 'Fault', for example if the battery power is low. Finish as delivered: Self-coloured – hot dipped zinc coated steel, type G275 coating, grade Z2 bending & profiling quality.Dimensions: Any door size can be accommodated up to a maximum of 5 m².Finish Optional polyester powder coat finish can be supplied to the whole or part of the door assemblies.Colour (for polyester powder coated finish): Many RAL or BS 4800 none metallic ranges are available as standard - other colours can be provided.Operation: A comprehensive range of fire activation systems with auxillary audible/ visual and safety devices are available to accommodate a range of fire strategies.Normal (standard) The door can be opened and closed for security purposes using a key switch or rocker switch. - System Requirements:A suitable fire signal.A 230v 1ph 6amp fused spur for mains power.- Fire:The control panel is designed to accept any of the following fire signals:Normally open, volt free 'clean' contact, which closes on alarm. Normally closed, volt free 'clean' contact, which opens on alarm. 24 v DC supply that is provided in alarm condition. 24 v DC supply that is interrupted in alarm condition. Ironmongery: It is not normal practice to supply secondary locking devices on life safety equipment. However secondary, key operated lath locks can be supplied, if particularly required for additional security.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=5

A power operated steel single-skinned fire resistant automatic vertical shutter consisting of concave, solid profiles. Offers good security and fire resistance with a lighter duty material construction than the larger Firetex 240 model and the additional benefit of a concealed electric motor drive system Fire performance to DIN 4102: Door section element materials are Class A2 (non-flammable) and have been tested and assessed to provide maximum 1 hour resistance in accordance with BS 476-22.

Gilgen commercial duty, electrically operated steel fire resistant vertical rolling shutter doors are designed for small apertures in industrial and commercial applications and are suitable for automatic internal fire compartmentation functions. Manufactured with 75 mm deep galvanized steel scroll lath curtain, galvanized steel ‘L’ shaped bottom rail and channel profiled vertical side guides. The main head assembly comprises of mild steel primed end plates and angle fixing brackets, tubular rotating barrel assembly complete with a three sided chamfered hood casing formed from 20 swg galvanized sheet steel.

More about Firetex 60 Tubular Motor:
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Firetex 60 Tubular Motor.
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Arrangement:
[Face fixed].
 Finish/ Colour:
[Manufacturer's standard].
[Polyester powder coat, BS 4800]. - Insert colour reference.
[Polyester powder coat, RAL]. - Insert RAL colour reference.
 Operation/ Fire activation:
[Manufacturers standard].
[a - Local heat detection].
 Frame/ Guides:
[2.6 mm thick galvanized steel side guides].
[4 > 6 mm thick, mild steel BZP steel end plate anchor brackets].
 Accessories:
[Not required].
[Removable motor cover]. - Optional to the standard head casing cover.
[Secondary, key operated lath locks].


top ^

Guidance

for Firetex 60 Tubular Motor

from Gilgen Door Systems UK Ltd

More about Firetex 60 Tubular Motor: As standard - Options - Further information.

As standard

Weight of whole door assembly (static load):

30 kgs/m².

Performance:

  • Environmental ingress protection level (motor & controls): No performance determined - use in dry, dust free environments only.
  • Motor Drive duty rating: Class S3, 30 %.
  • Fire resistance in accordance with BS 476-22: 1 hour.
  • Fire performance to DIN 4102: Door section element materials Class A2 (non-flammable). CE Marked with manufacturer's declaration of conformity.

Arrangement:

Face fixed vertical roller shutter.

Shutter curtain:

Solid, 75 mm concaved, single skinned, galvanized, cold rolled steel.

Operation:

Power operation of the door is provided by a 230 v1ph tubular motor, which is discreetly fitted within the door roller-barrel. The system also comprises a control panel combining an un-interruptible power supply and the operation interface for normal and fire operation. The product is specifically designed for low cycle usage and is generally intended to be normally left in the open position for automatic activation in the event of a fire alarm signal, or closed on a daily basis for loss prevention/ security purposes.

Fire Activation Systems:

On receipt of the fire signal, the control panel will send a signal to close the door under power. During Fire operation the key switch or rocker switch are isolated to ensure closure of the door cannot be inhibited. Central to the operation is the fact that power for the system is maintained even in the event of mains failure. System power is ensured by the integral back up power circuit that incorporates sealed batteries and a trickle charger. Should mains power fail during fire operation there is sufficient system power to close the door. The control panel is provided with diagnostic LEDs mounted on the front of the enclosure. These indicate 'Mains operation', 'Battery operation' and 'Fault', for example if the battery power is low.

Finish as delivered:

Self-coloured – hot dipped zinc coated steel, type G275 coating, grade Z2 bending & profiling quality.

Options

Dimensions:

Any door size can be accommodated up to a maximum of 5 m².

Finish Optional polyester powder coat finish can be supplied to the whole or part of the door assemblies.

Colour (for polyester powder coated finish):

Many RAL or BS 4800 none metallic ranges are available as standard - other colours can be provided.

Operation:

A comprehensive range of fire activation systems with auxillary audible/ visual and safety devices are available to accommodate a range of fire strategies.

Normal (standard)

The door can be opened and closed for security purposes using a key switch or rocker switch.

- System Requirements:

  • A suitable fire signal.
  • A 230v 1ph 6amp fused spur for mains power.

- Fire:

The control panel is designed to accept any of the following fire signals:

  • Normally open, volt free 'clean' contact, which closes on alarm.
  • Normally closed, volt free 'clean' contact, which opens on alarm.
  • 24 v DC supply that is provided in alarm condition.
  • 24 v DC supply that is interrupted in alarm condition.

Ironmongery:

It is not normal practice to supply secondary locking devices on life safety equipment. However secondary, key operated lath locks can be supplied, if particularly required for additional security.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Firetex 240 from Gilgen Door Systems UK LtdFiretex 240

A power operated single-skinned fire resistant automatic steel shutter consisting of concave, solid profiles. Offers good security and fire resistance with an integral smoke check and curtain suspension system. On large doors, wind endlocks are fitted to prevent excessive deflection and curtain retention. Gilgen Industrial heavy duty steel fire resistant vertical rolling shutter doors are designed for industrial, commercial and retail applications and are suitable for internal compartmentation functions.The product is specifically designed for low cycle usage and is generally intended to be normally left in the open position for automatic activation in the event of a fire alarm signal, or closed on a daily basis for loss prevention/ security purposes. It is tested and assessed to provide maximum 4 hour resistance in accordance with BS 476-22. Components: Manufactured from 75mm deep, concave galvanised steel scroll lath curtain, galvanised steel bottom rail, one piece side guides, steel endplates, barrel assembly complete with curtain suspension and smoke control system at the head of the opening.Smoke check system: A 'patented' curtain suspension/ smoke check system is fixed at the head of opening. The system is designed to both support the main curtain assembly in the closed position, providing full fire integrity, which also negates the requirement for a full head casing and also effect a full width mechanical smoke check facility which significantly reduces the opportunity for smoke passage through the head of the shutter.Fire performance: To DIN 4102. Door section element materials are Class A2 (non-flammable) and have been tested and assessed to provide maximum 4 hour resistance in accordance with BS 476-22.Weight (door assembly): 30 kg/m².Environmental ingress protection level (motor and controls): No performance determined - use in dry, dust free environments only.Motor drive duty rating: Class S3 – 30 %.Ironmongery: It is not normal practice to supply secondary locking devices on life safety equipment.Size (maximum w x l): 7000 x 7000 mm. Larger sizes can be supplied on application, normally to a maximum area of 49 m², but even greater area’s can be supplied for extended applications which can be agreed with full project specific interface designs and fire assessment documentation.Operation: Electrically operated by means of a 3 phase - 415 volt motor unit c/w an integral manual controlled descent system (CDO) for use in the event of manual operation and automatic fire activation. The unit is mounted external to the drive barrel and head hood casing (where supplied). Mains power supply required 3 phase - neutral & earth 220/415V ac 10 amp terminating in a suitable isolator to suit the environment. This should be positioned on the motor side of the door and within 1 m of the opening and at high level adjacent to the motor drive unit, unless otherwise agreed.Control: Pre-wired low level push button station with open, close and emergency stop functions. Fire Activation Systems: Auto reset solenoid unit with manual test and reset cables and secondary gravity fail safe fusible link. Safety Options: Impulse or remote fire activation; additional photo cell safety beam with Firegard E control systemAudible / visual/ voice warning devices.Finish: The main exposed metal work structure and optional casings are mainly a galvanised self finish as standard, but optional polyester powder coat finish can be supplied to the whole or part of the door assemblies and optional head casingsActivation: A comprehensive range of fire activation systems with auxiliary audible/ visual and safety devices are available to accommodate a range of fire strategies, including but not limited to local heat detection, electro mechanical solenoid units for linking to the main building fire alarm with either manual reset and test cables or fully automatic electrical reset function, optional Firegard interface panels with fault monitoring, LED status lights, key switch fire test facilities, automatic power detection for either power driven or manual controlled descent closure with options for delayed activation with two stage closing sequence.Safety Options:Standard: Impulse/ dead man operation with gravity fail safe closing on mains failure.Casings: Note the Gilgen Firetex product does not require a hood casing or motor cover to comply with the required fire performance, but these are available for aesthetic purposes, if required.Removable 3 sided motor cover (to cover the exposed part of the drive motor, outside of the 3 sided hood profile).Organization:Fire Insurance Committee.FIRTO Tested Smoke Check.Institute of Fire Prevention Officers.Lloyds Insurance.London Scientific Services.Loss Prevention And Certification Board (LPCB).Warrington Fire Research Centre.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=5

A power operated single-skinned fire resistant automatic steel shutter consisting of concave, solid profiles. Offers good security and fire resistance with an integral smoke check and curtain suspension system. On large doors, wind endlocks are fitted to prevent excessive deflection and curtain retention.

Gilgen Industrial heavy duty steel fire resistant vertical rolling shutter doors are designed for industrial, commercial and retail applications and are suitable for internal compartmentation functions.

The product is specifically designed for low cycle usage and is generally intended to be normally left in the open position for automatic activation in the event of a fire alarm signal, or closed on a daily basis for loss prevention/ security purposes. It is tested and assessed to provide maximum 4 hour resistance in accordance with BS 476-22.

More about Firetex 240:
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Firetex 240.
 Arrangement:
[Face fixed].
 Finish/ Colour:
[Manufacturer's standard]. - In addition to standard – Polyester powder coat finish to - BS 4800 / RAL colour range.
 Frame/ Guides:
[2.6 > 3 mm thick galvanised steel side guides, complete with articulated windlock].
[6 > 10 mm thick mild steel BZP steel end plate anchor brackets].
 Control:
[Manufacturer's standard].
[Low level sprung loaded key switch].
 Fire Activation Systems:
[Manufacturer's standard].
[a - Electro mechanical solenoid units with fully automatic reset ].
[b - Firegard alarm interface panel].
 Safety Options:
[Standard].
[In addition to standard - Time delay closing with fire interface panel].
[In addition to standard - Time delay closing with Firegard E control system].
 Accessories:
[Not required].
[Removable three-sided motor cover].
[Three-sided hood with chamfered corners].


top ^

Guidance

for Firetex 240

from Gilgen Door Systems UK Ltd

More about Firetex 240: As standard - Options - Further information.

As standard

Components:

Manufactured from 75mm deep, concave galvanised steel scroll lath curtain, galvanised steel bottom rail, one piece side guides, steel endplates, barrel assembly complete with curtain suspension and smoke control system at the head of the opening.

Smoke check system:

A 'patented' curtain suspension/ smoke check system is fixed at the head of opening. The system is designed to both support the main curtain assembly in the closed position, providing full fire integrity, which also negates the requirement for a full head casing and also effect a full width mechanical smoke check facility which significantly reduces the opportunity for smoke passage through the head of the shutter.

Fire performance:

To DIN 4102. Door section element materials are Class A2 (non-flammable) and have been tested and assessed to provide maximum 4 hour resistance in accordance with BS 476-22.

Weight (door assembly):

30 kg/m².

Environmental ingress protection level (motor and controls):

No performance determined - use in dry, dust free environments only.

Motor drive duty rating:

Class S3 – 30 %.

Ironmongery:

It is not normal practice to supply secondary locking devices on life safety equipment.

Options

Size (maximum w x l):

7000 x 7000 mm. Larger sizes can be supplied on application, normally to a maximum area of 49 m², but even greater area’s can be supplied for extended applications which can be agreed with full project specific interface designs and fire assessment documentation.

Operation:

Electrically operated by means of a 3 phase - 415 volt motor unit c/w an integral manual controlled descent system (CDO) for use in the event of manual operation and automatic fire activation. The unit is mounted external to the drive barrel and head hood casing (where supplied).

Mains power supply required 3 phase - neutral & earth 220/415V ac 10 amp terminating in a suitable isolator to suit the environment. This should be positioned on the motor side of the door and within 1 m of the opening and at high level adjacent to the motor drive unit, unless otherwise agreed.

Control:

Pre-wired low level push button station with open, close and emergency stop functions.

Fire Activation Systems:

Auto reset solenoid unit with manual test and reset cables and secondary gravity fail safe fusible link.

Safety Options:

Impulse or remote fire activation; additional photo cell safety beam with Firegard E control system

Audible / visual/ voice warning devices.

Finish:

The main exposed metal work structure and optional casings are mainly a galvanised self finish as standard, but optional polyester powder coat finish can be supplied to the whole or part of the door assemblies and optional head casings

Activation:

A comprehensive range of fire activation systems with auxiliary audible/ visual and safety devices are available to accommodate a range of fire strategies, including but not limited to local heat detection, electro mechanical solenoid units for linking to the main building fire alarm with either manual reset and test cables or fully automatic electrical reset function, optional Firegard interface panels with fault monitoring, LED status lights, key switch fire test facilities, automatic power detection for either power driven or manual controlled descent closure with options for delayed activation with two stage closing sequence.

Safety Options:

Standard: Impulse/ dead man operation with gravity fail safe closing on mains failure.

Casings:

Note the Gilgen Firetex product does not require a hood casing or motor cover to comply with the required fire performance, but these are available for aesthetic purposes, if required.

Removable 3 sided motor cover (to cover the exposed part of the drive motor, outside of the 3 sided hood profile).

Organization:

  • Fire Insurance Committee.
  • FIRTO Tested Smoke Check.
  • Institute of Fire Prevention Officers.
  • Lloyds Insurance.
  • London Scientific Services.
  • Loss Prevention And Certification Board (LPCB).
  • Warrington Fire Research Centre.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Gilgen Rolegard High Security Shutters SR2 from Gilgen Door Systems UK LtdGilgen Rolegard High Security Shutters SR2

Gilgen heavy duty steel vertical rolling shutter doors – include enhanced levels of tested security resistance, energy conservation and sound reduction. These products also provide compliance with insurance, Police Preferred specifications and Secured by Design standards. The doors comply with BS EN 13241-1. SR2 is medium security to protect against determined opportunist attack.Applications:Shutters with external direct drive motors are normally used on buildings with three phase mains power supply, such as industrial applications which may require medium to heavy usage for example vehicle access doors.Shutters with single phase motors are suitable for applications which have limited head space or require a compact appearance and buildings that are limited to a single phase mains power supply, for example shop fronts, commercial entrances or vehicle access routes with low traffic requirements.Security rating: LPS 1175 SR 2 (issue 7) and Secured by Design approved.Arrangement: Internal face fixed.Product reference: - SR2–INS–DD: Maximum door area: 64 m².Curtain: Curved micro ribbed faces, insulated core.Operation: External direct drive three phase 415 V AC motor and neutral supply complete with manual override hand chain. Motor drive duty rating: Three phase, Class S3 – 65%.Thermal insulation (U-value): 3.8 W/m²K.- SR2–INS–TM: Maximum door area: 25 m². Curtain: Curved micro ribbed faces, insulated core. Operation: Single phase 230 V AC; tubular motor complete with manual override hand crank. Motor drive duty rating: Single phase tubular motor and controls, Class S3 – 25%. Thermal insulation (U-value): 3.8 W/m²K.- SR2–SS–DD:Maximum door area: 64 m².Curtain: Single skin concave galvanized steel lath.Operation: Three phase; direct drive (DD) 415V AC motor complete with emergency hand chain. Motor drive duty rating: Three phase, Class S3 – 65%. Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.- SR2–SS–TM:Maximum door area: 20 m².Curtain: Single skin concave galvanized steel lath.Operation: Single phase 230 V AC; tubular motor complete with manual override hand crank. Motor drive duty rating: Single phase tubular motor and controls, Class S3 – 25%. Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.Performance:Security rating; Loss Prevention Standard 1175 Issue 7 Security Rating 2, meeting all the requirements defined in sections 3 and 4 of the Loss Prevention Certification Board test standard.Gilgen Door Systems understand that security risk ratings can be different for each application. The above SR ratings are provided for guidance purposes only and it is the responsibility of the specifier or customer to make the final interpretation and decision.Approved by Secured by Design – The UK official Police design initiative to reduce crime governed by The Association of Chief Police Officers. Wind pressure (BS EN 12424): Class 3 Beaufort 11, 73 mph, 700 N/m².Sound reduction (Rw): 16 dB. Static load (weight of whole door assembly): Approximately 30 kg/m².Controls:A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, safety edges, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Contact manufacturer for further information.Safety activation: Dead man operation as standard which requires the operator to apply constant pressure to the door operating device (key switch or push button) as per BS EN 12453-5.5.1.Remote or automatic door controls – minimum requirements, impact sensitive safety edge/ non contact safety beam.Accessories:Three-sided head cover; available for applications which may require improved aesthetic appearance or protection from local environmental conditions. Removable motor cover; available to cover the exposed part of the drive motor which projects outside of the three sided head cover on the three phase design.For applications which require a more substantial seal against water ingress, a suitably designed structural threshold arrangement is recommended – contact Gilgen for advice.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=3

Gilgen heavy duty steel vertical rolling shutter doors – include enhanced levels of tested security resistance, energy conservation and sound reduction. These products also provide compliance with insurance, Police Preferred specifications and Secured by Design standards. The doors comply with BS EN 13241-1. SR2 is medium security to protect against determined opportunist attack.

Applications:

  • Shutters with external direct drive motors are normally used on buildings with three phase mains power supply, such as industrial applications which may require medium to heavy usage for example vehicle access doors.
  • Shutters with single phase motors are suitable for applications which have limited head space or require a compact appearance and buildings that are limited to a single phase mains power supply, for example shop fronts, commercial entrances or vehicle access routes with low traffic requirements.

More about Gilgen Rolegard High Security Shutters SR2:
As standard - Options - Further information.

PendingHIGH SECURITY SHUTTERS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
[Gilgen Rolegard High Security SR2–INS–DD].
[Gilgen Rolegard High Security SR2–INS–TM].
[Gilgen Rolegard High Security SR2–SS–DD].
 Size (w x h) :
[ ______ ] - 2–8 m; insert requirements.
 Colour/ finish:
[Galvanized only]. - As standard.
[Painted to BS 4800, colour]. - Insert requirements from RAL colour range.
 Frame/ guides:
[Galvanized heavy duty reinforced steel].
[Carbon steel plate BZP coated]. - Insert requirements.
 Control:
[ ______ ] - Contact manufacturer for details and insert requirements.
 Safety:
[Dead man].
[Contact safety edge].
[Non-contact safety beam].
 Activation:
[Building Management System integration]. - For use with SR2–SS–DD only.
[Door status monitoring controller]. - For use with SR2–SS–DD only.
[Infrared vehicle/ person detection scanner].
 Accessories:
[None].
[Galvanized sheet steel motor cover]. - For shutters with external direct drive motors only.
[Galvanized three sided, sheet steel hood cover].


top ^

Guidance

for Gilgen Rolegard High Security Shutters SR2

from Gilgen Door Systems UK Ltd

More about Gilgen Rolegard High Security Shutters SR2: As standard - Options - Further information.

As standard

Security rating:

LPS 1175 SR 2 (issue 7) and Secured by Design approved.

Arrangement:

Internal face fixed.

Options

Product reference:

- SR2–INS–DD:

  • Maximum door area: 64 m².
  • Curtain: Curved micro ribbed faces, insulated core.
  • Operation: External direct drive three phase 415 V AC motor and neutral supply complete with manual override hand chain. Motor drive duty rating: Three phase, Class S3 – 65%.
  • Thermal insulation (U-value): 3.8 W/m²K.

- SR2–INS–TM:

  • Maximum door area: 25 m².
  • Curtain: Curved micro ribbed faces, insulated core.
  • Operation: Single phase 230 V AC; tubular motor complete with manual override hand crank. Motor drive duty rating: Single phase tubular motor and controls, Class S3 – 25%.
  • Thermal insulation (U-value): 3.8 W/m²K.

- SR2–SS–DD:

  • Maximum door area: 64 m².
  • Curtain: Single skin concave galvanized steel lath.
  • Operation: Three phase; direct drive (DD) 415V AC motor complete with emergency hand chain. Motor drive duty rating: Three phase, Class S3 – 65%.
  • Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.

- SR2–SS–TM:

  • Maximum door area: 20 m².
  • Curtain: Single skin concave galvanized steel lath.
  • Operation: Single phase 230 V AC; tubular motor complete with manual override hand crank. Motor drive duty rating: Single phase tubular motor and controls, Class S3 – 25%.
  • Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.

Performance:

  • Security rating; Loss Prevention Standard 1175 Issue 7 Security Rating 2, meeting all the requirements defined in sections 3 and 4 of the Loss Prevention Certification Board test standard.
  • Gilgen Door Systems understand that security risk ratings can be different for each application. The above SR ratings are provided for guidance purposes only and it is the responsibility of the specifier or customer to make the final interpretation and decision.
  • Approved by Secured by Design – The UK official Police design initiative to reduce crime governed by The Association of Chief Police Officers.
  • Wind pressure (BS EN 12424): Class 3 Beaufort 11, 73 mph, 700 N/m².
  • Sound reduction (Rw): 16 dB.
  • Static load (weight of whole door assembly): Approximately 30 kg/m².

Controls:

A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, safety edges, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Contact manufacturer for further information.

Safety activation:

  • Dead man operation as standard which requires the operator to apply constant pressure to the door operating device (key switch or push button) as per BS EN 12453-5.5.1.
  • Remote or automatic door controls – minimum requirements, impact sensitive safety edge/ non contact safety beam.

Accessories:

  • Three-sided head cover; available for applications which may require improved aesthetic appearance or protection from local environmental conditions.
  • Removable motor cover; available to cover the exposed part of the drive motor which projects outside of the three sided head cover on the three phase design.
  • For applications which require a more substantial seal against water ingress, a suitably designed structural threshold arrangement is recommended – contact Gilgen for advice.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Gilgen Rolegard High Security Shutters SR3 from Gilgen Door Systems UK LtdGilgen Rolegard High Security Shutters SR3

Gilgen heavy duty steel vertical rolling shutter doors – include enhanced levels of tested security resistance, energy conservation and sound reduction. These products also provide compliance with insurance, Police Preferred specifications and Secured by Design standards. The doors comply with BS EN 13241-1. SR3 is high risk security to protect against deliberate forced entry. Applications:Shutters with external direct drive motors are normally used on buildings with three phase mains power supply, such as industrial applications which may require medium to heavy usage for example vehicle access doors.Shutters with single phase motors are suitable for applications which have limited head space or require a compact appearance and buildings that are limited to a single phase mains power supply, for example shop fronts, commercial entrances or vehicle access routes with low traffic requirements.Security rating: LPS 1175 SR 3 (issue 7) and Secured by Design approved.Arrangement: Internal face fixed.Locking: Pair of padlockable sprung loaded shoot bolts fitted to the inside bottom edge of the shutter complete with safety interlock switch. Product reference: - SR3–SS–DD: Maximum door area: 50 m².Curtain: Single skin concave galvanized steel lath.Operation: Three phase 415 V AC; direct drive (DD) motor complete with emergency hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%. Wind pressure (to BS EN 12424): Class 3 – Beaufort 11, 73 mph, 700 N/m². Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.Static load (weight of whole door assembly): Approximately 35 kg/m². - SR3–SS–TM: Maximum door area: 15 m².Curtain: Curved micro ribbed faces, insulated core. Operation: Single phase 230 V AC; tubular motor complete with manual override hand crank. Motor drive duty rating: Single phase tubular motor and controls, Class S3 – 25%. Thermal insulation (U-value): 3.8 W/m²K.- SR3–SS–DD:Maximum door area: 64 m².Curtain: Single skin concave galvanized steel lath.Operation: Single phase integral tubular motor drive 230 V AC complete with manual override hand crank. Motor drive duty rating: Single phase tubular motor and controls Class S3 – 25%. Wind pressure (to BS EN 12424): Class 3 – Beaufort 11, 73 mph, 700 N/m². Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.Static load (weight of whole door assembly): Approximately 30 kg/m². - SR3–SSHD–CD: Maximum door area: 64 m².Curtain: Single skin concave galvanized steel lath.Operation: Three phase; chain drive (CD) motor complete with separate safety break and manual override hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%. Wind pressure (to BS EN 12424): Class 5 – Beaufort 13, 93 mph, 1000 N/m² (hurricane). Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.Static load (weight of whole door assembly): Approximately 50 kg/m².Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 4. - SR3–SSHD–DD: As SR3–SSHD–CD, with three phase motor; direct drive (DD) motor complete with emergency hand chain. Maximum door area: 27.5 m². - SR3–INSHD–CD: Maximum door area: 64 m².Curtain: Double skin foam filled insulated lath (smooth flat faced).Operation: Three phase 415 V AC; chain drive (CD) motor complete with separate safety break and manual override hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%. Wind pressure (BS EN 12424): Class 5 – Beaufort 13, 93 mph, 1000 N/m² (hurricane).Thermal insulation (U-value): 4.4 W/m²K.Sound reduction (Rw): 25–35 dB (insulation type varies dependent upon acoustic requirements).Static load (weight of whole door assembly): Approximately 60 kg/m².Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 4. - SR3–INSHD–DD: As SR3–INSHD–CD, with maximum door area: 30 m².Performance:Security rating; Loss Prevention Standard 1175 Issue 7 Security Rating 3, meeting all the requirements defined in sections 3 and 4 of the Loss Prevention Certification Board test standard.Gilgen Door Systems understand that security risk ratings can be different for each application. The above SR ratings are provided for guidance purposes only and it is the responsibility of the specifier or customer to make the final interpretation and decision.Approved by Secured by Design – The UK official Police design initiative to reduce crime governed by The Association of Chief Police Officers. Controls:A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, safety edges, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Contact manufacturer for further information.Safety activation: Dead man operation as standard which requires the operator to apply constant pressure to the door operating device (key switch or push button) as per BS EN 12453-5.5.1.Remote or automatic door controls – minimum requirements, impact sensitive safety edge/ non contact safety beam.Accessories:Three-sided head cover; available for applications which may require improved aesthetic appearance or protection from local environmental conditions. Removable motor cover; available to cover the exposed part of the drive motor which projects outside of the three sided head cover on the three phase design.For applications which require a more substantial seal against water ingress, a suitably designed structural threshold arrangement is recommended – contact Gilgen for advice.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=3

Gilgen heavy duty steel vertical rolling shutter doors – include enhanced levels of tested security resistance, energy conservation and sound reduction. These products also provide compliance with insurance, Police Preferred specifications and Secured by Design standards. The doors comply with BS EN 13241-1. SR3 is high risk security to protect against deliberate forced entry.

Applications:

  • Shutters with external direct drive motors are normally used on buildings with three phase mains power supply, such as industrial applications which may require medium to heavy usage for example vehicle access doors.
  • Shutters with single phase motors are suitable for applications which have limited head space or require a compact appearance and buildings that are limited to a single phase mains power supply, for example shop fronts, commercial entrances or vehicle access routes with low traffic requirements.

More about Gilgen Rolegard High Security Shutters SR3:
As standard - Options - Further information.

PendingHIGH SECURITY SHUTTERS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
[Gilgen Rolegard High Security SR3–SS–DD].
[Gilgen Rolegard High Security SR3–SS–TM].
[Gilgen Rolegard High Security SR3–SSHD–CD].
 Size (w x h) :
[ ______ ] - 2–8 m; insert requirements.
 Colour/ finish:
[Galvanized only]. - As standard.
[Painted to BS 4800, colour]. - Insert requirements from RAL colour range.
 Frame/ guides:
[Galvanized heavy duty reinforced steel].
[Carbon steel plate BZP coated]. - Insert requirements.
 Control:
[ ______ ] - Contact manufacturer for details and insert requirements.
 Safety:
[Dead man].
[Contact safety edge].
[Non-contact safety beam].
 Activation:
[Building Management System integration].
[Door status monitoring controller].
[Infrared vehicle/ person detection scanner].
 Accessories:
[None].
[Galvanized sheet steel motor cover]. - For shutters with external direct drive motors only.
[Galvanized three sided, sheet steel hood cover].


top ^

Guidance

for Gilgen Rolegard High Security Shutters SR3

from Gilgen Door Systems UK Ltd

More about Gilgen Rolegard High Security Shutters SR3: As standard - Options - Further information.

As standard

Security rating:

LPS 1175 SR 3 (issue 7) and Secured by Design approved.

Arrangement:

Internal face fixed.

Locking:

Pair of padlockable sprung loaded shoot bolts fitted to the inside bottom edge of the shutter complete with safety interlock switch.

Options

Product reference:

- SR3–SS–DD:

  • Maximum door area: 50 m².
  • Curtain: Single skin concave galvanized steel lath.
  • Operation: Three phase 415 V AC; direct drive (DD) motor complete with emergency hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%.
  • Wind pressure (to BS EN 12424): Class 3 – Beaufort 11, 73 mph, 700 N/m².
  • Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.
  • Static load (weight of whole door assembly): Approximately 35 kg/m².

- SR3–SS–TM:

  • Maximum door area: 15 m².
  • Curtain: Curved micro ribbed faces, insulated core.
  • Operation: Single phase 230 V AC; tubular motor complete with manual override hand crank. Motor drive duty rating: Single phase tubular motor and controls, Class S3 – 25%.
  • Thermal insulation (U-value): 3.8 W/m²K.

- SR3–SS–DD:

  • Maximum door area: 64 m².
  • Curtain: Single skin concave galvanized steel lath.
  • Operation: Single phase integral tubular motor drive 230 V AC complete with manual override hand crank. Motor drive duty rating: Single phase tubular motor and controls Class S3 – 25%.
  • Wind pressure (to BS EN 12424): Class 3 – Beaufort 11, 73 mph, 700 N/m².
  • Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.
  • Static load (weight of whole door assembly): Approximately 30 kg/m².

- SR3–SSHD–CD:

  • Maximum door area: 64 m².
  • Curtain: Single skin concave galvanized steel lath.
  • Operation: Three phase; chain drive (CD) motor complete with separate safety break and manual override hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%.
  • Wind pressure (to BS EN 12424): Class 5 – Beaufort 13, 93 mph, 1000 N/m² (hurricane).
  • Fire performance (to DIN 4102): Class A2 – door section element materials are non-flammable.
  • Static load (weight of whole door assembly): Approximately 50 kg/m².
  • Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 4.

- SR3–SSHD–DD:

As SR3–SSHD–CD, with three phase motor; direct drive (DD) motor complete with emergency hand chain. Maximum door area: 27.5 m².

- SR3–INSHD–CD:

  • Maximum door area: 64 m².
  • Curtain: Double skin foam filled insulated lath (smooth flat faced).
  • Operation: Three phase 415 V AC; chain drive (CD) motor complete with separate safety break and manual override hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%.
  • Wind pressure (BS EN 12424): Class 5 – Beaufort 13, 93 mph, 1000 N/m² (hurricane).
  • Thermal insulation (U-value): 4.4 W/m²K.
  • Sound reduction (Rw): 25–35 dB (insulation type varies dependent upon acoustic requirements).
  • Static load (weight of whole door assembly): Approximately 60 kg/m².
  • Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 4.

- SR3–INSHD–DD:

As SR3–INSHD–CD, with maximum door area: 30 m².

Performance:

  • Security rating; Loss Prevention Standard 1175 Issue 7 Security Rating 3, meeting all the requirements defined in sections 3 and 4 of the Loss Prevention Certification Board test standard.
  • Gilgen Door Systems understand that security risk ratings can be different for each application. The above SR ratings are provided for guidance purposes only and it is the responsibility of the specifier or customer to make the final interpretation and decision.
  • Approved by Secured by Design – The UK official Police design initiative to reduce crime governed by The Association of Chief Police Officers.

Controls:

A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, safety edges, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Contact manufacturer for further information.

Safety activation:

  • Dead man operation as standard which requires the operator to apply constant pressure to the door operating device (key switch or push button) as per BS EN 12453-5.5.1.
  • Remote or automatic door controls – minimum requirements, impact sensitive safety edge/ non contact safety beam.

Accessories:

  • Three-sided head cover; available for applications which may require improved aesthetic appearance or protection from local environmental conditions.
  • Removable motor cover; available to cover the exposed part of the drive motor which projects outside of the three sided head cover on the three phase design.
  • For applications which require a more substantial seal against water ingress, a suitably designed structural threshold arrangement is recommended – contact Gilgen for advice.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Gilgen Rolegard High Security Shutters SR4 from Gilgen Door Systems UK LtdGilgen Rolegard High Security Shutters SR4

Gilgen heavy duty steel vertical rolling shutter doors – include enhanced levels of tested security resistance, hurricane wind rated and blast performance. These products also provide compliance with insurance, Police Preferred specifications and Secured by Design standards. The doors comply with BS EN 13241-1. SR4 is very high risk security to protect against experienced attempts of forced entry. Suitable for applications which require a three phase mains power supply and heavy duty operation. Manual override is via a low level hand chain. Typical applications include industrial premises which may require medium to heavy usage for example vehicle access doors.Security rating: LPS 1175 SR 4 (issue 7) and Secured by Design approved.Arrangement: Internal face fixed.Locking: Automatic Self Locking system (ASL) which normally negates the need for secondary mechanical or electric locks.Product reference: - SR4–DSHD–CD: Maximum door area: 64 m².Curtain: Double skin heavy duty with reinforced core (smooth flat faced).Operation: Three phase 415 V AC; chain drive (CD) motor complete with separate safety break and manual override hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%. Wind pressure (BS EN 12424): Class 5 – Beaufort 13, 93 mph, 1000 N/m² (hurricane).Blast rated – up to 3 kPa (conditions apply).Static load (weight of whole door assembly): Approximately 80 kg/m².Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 4. - SR4–DSHD–DD: Maximum door area: 14 m².Curtain: Double skin heavy duty with reinforced core (smooth flat faced).Operation: Direct drive (DD) 415 V AC motor complete with emergency hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%. Wind pressure (BS EN 12424): Class 5 – Beaufort 13, 93 mph, 1000 N/m² (hurricane).Blast rated – up to 3 kPa (conditions apply).Static load (weight of whole door assembly): Approximately 80 kg/m².Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 4. Performance:Security rating; Loss Prevention Standard 1175 Issue 7 Security Rating 4, meeting all the requirements defined in sections 3 and 4 of the Loss Prevention Certification Board test standard.Gilgen Door Systems understand that security risk ratings can be different for each application. The above SR ratings are provided for guidance purposes only and it is the responsibility of the specifier or customer to make the final interpretation and decision.Approved by Secured by Design – The UK official Police design initiative to reduce crime governed by The Association of Chief Police Officers. Controls:A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, safety edges, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Contact manufacturer for further information.Safety activation: Dead man operation as standard which requires the operator to apply constant pressure to the door operating device (key switch or push button) as per BS EN 12453-5.5.1.Remote or automatic door controls – minimum requirements, impact sensitive safety edge/ non contact safety beam.Accessories:Three-sided head cover; available for applications which may require improved aesthetic appearance or protection from local environmental conditions. Removable motor cover; available to cover the exposed part of the drive motor which projects outside of the three sided head cover on the three phase design.For applications which require a more substantial seal against water ingress, a suitably designed structural threshold arrangement is recommended – contact Gilgen for advice.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=3

Gilgen heavy duty steel vertical rolling shutter doors – include enhanced levels of tested security resistance, hurricane wind rated and blast performance. These products also provide compliance with insurance, Police Preferred specifications and Secured by Design standards. The doors comply with BS EN 13241-1.

SR4 is very high risk security to protect against experienced attempts of forced entry. Suitable for applications which require a three phase mains power supply and heavy duty operation. Manual override is via a low level hand chain. Typical applications include industrial premises which may require medium to heavy usage for example vehicle access doors.

More about Gilgen Rolegard High Security Shutters SR4:
As standard - Options - Further information.

PendingHIGH SECURITY SHUTTERS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
[Gilgen Rolegard High Security SR4–DSHD–CD].
[Gilgen Rolegard High Security SR4–DSHD–DD].
 Size (w x h) :
[ ______ ] - 2–8 m; insert requirements.
 Colour/ finish:
[Galvanized only]. - As standard.
[Painted to BS 4800, colour]. - Insert requirements from RAL colour range.
 Frame/ guides:
[Galvanized heavy duty reinforced steel].
[Carbon steel plate BZP coated]. - Insert requirements.
 Control:
[ ______ ] - Contact manufacturer for details and insert requirements.
 Safety:
[Dead man].
[Contact safety edge].
[Non-contact safety beam].
 Activation:
[Building Management System integration].
[Door status monitoring controller].
[Infrared vehicle/ person detection scanner].
 Accessories:
[None].
[Galvanized sheet steel motor cover]. - For shutters with external direct drive motors only.
[Galvanized three sided, sheet steel hood cover].


top ^

Guidance

for Gilgen Rolegard High Security Shutters SR4

from Gilgen Door Systems UK Ltd

More about Gilgen Rolegard High Security Shutters SR4: As standard - Options - Further information.

As standard

Security rating:

LPS 1175 SR 4 (issue 7) and Secured by Design approved.

Arrangement:

Internal face fixed.

Locking:

Automatic Self Locking system (ASL) which normally negates the need for secondary mechanical or electric locks.

Options

Product reference:

- SR4–DSHD–CD:

  • Maximum door area: 64 m².
  • Curtain: Double skin heavy duty with reinforced core (smooth flat faced).
  • Operation: Three phase 415 V AC; chain drive (CD) motor complete with separate safety break and manual override hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%.
  • Wind pressure (BS EN 12424): Class 5 – Beaufort 13, 93 mph, 1000 N/m² (hurricane).
  • Blast rated – up to 3 kPa (conditions apply).
  • Static load (weight of whole door assembly): Approximately 80 kg/m².
  • Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 4.

- SR4–DSHD–DD:

  • Maximum door area: 14 m².
  • Curtain: Double skin heavy duty with reinforced core (smooth flat faced).
  • Operation: Direct drive (DD) 415 V AC motor complete with emergency hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%.
  • Wind pressure (BS EN 12424): Class 5 – Beaufort 13, 93 mph, 1000 N/m² (hurricane).
  • Blast rated – up to 3 kPa (conditions apply).
  • Static load (weight of whole door assembly): Approximately 80 kg/m².
  • Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 4.

Performance:

  • Security rating; Loss Prevention Standard 1175 Issue 7 Security Rating 4, meeting all the requirements defined in sections 3 and 4 of the Loss Prevention Certification Board test standard.
  • Gilgen Door Systems understand that security risk ratings can be different for each application. The above SR ratings are provided for guidance purposes only and it is the responsibility of the specifier or customer to make the final interpretation and decision.
  • Approved by Secured by Design – The UK official Police design initiative to reduce crime governed by The Association of Chief Police Officers.

Controls:

A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, safety edges, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Contact manufacturer for further information.

Safety activation:

  • Dead man operation as standard which requires the operator to apply constant pressure to the door operating device (key switch or push button) as per BS EN 12453-5.5.1.
  • Remote or automatic door controls – minimum requirements, impact sensitive safety edge/ non contact safety beam.

Accessories:

  • Three-sided head cover; available for applications which may require improved aesthetic appearance or protection from local environmental conditions.
  • Removable motor cover; available to cover the exposed part of the drive motor which projects outside of the three sided head cover on the three phase design.
  • For applications which require a more substantial seal against water ingress, a suitably designed structural threshold arrangement is recommended – contact Gilgen for advice.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Gilgen Rolegard High Security Shutters SR5 from Gilgen Door Systems UK LtdGilgen Rolegard High Security Shutters SR5

Gilgen heavy duty steel vertical rolling shutter door, incorporating enhanced levels of tested security resistance for mechanical and ballistic attack, with an inherent blast capability and ability to withstand hurricane level weather conditions. Heavy duty double curtain skin with reinforced core driven through direct drive motor. This product also provides compliance with Insurance and Police Preferred ‘Secured by Design’ Standards. SR5 incorporates a very high level of security to help protect against experienced attempts of forced entry. Suitable for applications which require a three phase mains power supply and heavy duty operation. Manual override is via a low level hand chain. Typical applications include industrial premises which may require medium to heavy usage for example vehicle access doors.Security rating: LPS 1175 SR 5 (issue 7) and Secured by Design approved.Arrangement: Internal face fixed.Locking: Automatic Self Locking system (ASL) which normally negates the need for secondary mechanical or electric locks. Tested to LPS 1175 (Issue 7) SR 5.Wind Pressure:BS EN 12424 Class 5 – Beaufort 13, 93 mph,1000 N/m² (hurricane).Curtain:Double skin heavy duty with reinforced core (smooth flat faced).Size:Width: 2–8 m.Height: 2–10 m.Product reference: - SR5-B–DSHD–CD: Maximum door area: 64 m².Operation: Three phase 415 V AC; chain drive (CD) motor complete with separate safety break and manual override hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%.Ballistic rating – BS EN 1522 Windows, Door, Shutters and Blinds – Bullet Resistance, Requirements and Classification: Standard – FB3 (NS) No splinters, option FB4 (NS) No splinters.Blast rated – up to 3 kPa (conditions apply).Static load (weight of whole door assembly): Approximately 100–170 kg/m².Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 5. - SR5-B–DSHD–DD: Maximum door area: 14 m².Operation: Direct drive (DD) 415 V AC motor complete with emergency hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%.Ballistic rating – BS EN 1522 Windows, Door, Shutters and Blinds – Bullet Resistance, Requirements and Classification: Standard – FB3 (NS) No splinters, option FB4 (NS) No splinters.Blast rated – up to 3 kPa (conditions apply).Static load (weight of whole door assembly): Approximately 100–170 kg/m².Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 5.Performance:Security rating; Loss Prevention Standard 1175 Issue 7 Security Rating 5, meeting all the requirements defined in sections 3 and 4 of the Loss Prevention Certification Board test standard.Gilgen Door Systems understand that security risk ratings can be different for each application. The above SR ratings are provided for guidance purposes only and it is the responsibility of the specifier or customer to make the final interpretation and decision.Approved by Secured by Design – The UK official Police design initiative to reduce crime governed by The Association of Chief Police Officers.Controls:A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, safety edges, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Contact manufacturer for further information.Safety activation: Dead man operation as standard which requires the operator to apply constant pressure to the door operating device (key switch or push button) as per BS EN 12453-5.5.1.Remote or automatic door controls – minimum requirements, impact sensitive safety edge/ non contact safety beam.Accessories:Three-sided head cover; available for applications which may require improved aesthetic appearance or protection from local environmental conditions.Removable motor cover; available to cover the exposed part of the drive motor which projects outside of the three sided head cover on the three phase design.For applications which require a more substantial seal against water ingress, a suitably designed structural threshold arrangement is recommended – contact Gilgen for advice.250LPCB

Gilgen heavy duty steel vertical rolling shutter door, incorporating enhanced levels of tested security resistance for mechanical and ballistic attack, with an inherent blast capability and ability to withstand hurricane level weather conditions. Heavy duty double curtain skin with reinforced core driven through direct drive motor. This product also provides compliance with Insurance and Police Preferred ‘Secured by Design’ Standards.

SR5 incorporates a very high level of security to help protect against experienced attempts of forced entry. Suitable for applications which require a three phase mains power supply and heavy duty operation. Manual override is via a low level hand chain. Typical applications include industrial premises which may require medium to heavy usage for example vehicle access doors.

More about Gilgen Rolegard High Security Shutters SR5:
As standard - Options - Approvals - Further information.

PendingHIGH SECURITY SHUTTERS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
[Gilgen Rolegard High Security SR5-B–DSHD–CD].
[Gilgen Rolegard High Security SR5-B–DSHD–DD].
 Size (w x h) :
[ ______ ] - Insert requirements.
 Colour/ finish:
[Galvanized]. - As standard.
[Painted to BS 4800, colour]. - Insert requirements from RAL colour range.
 Frame/ guides:
[Galvanized heavy duty reinforced steel].
[Carbon steel plate, BZP coated]. - Insert requirements.
 Control:
[Low level control panel with push buttons]. - Manufacturers standard.
 Safety:
[Contact safety edge].
[Dead man].
[Non-contact safety beam].
 Activation:
[Building Management System integration].
[Door status monitoring controller].
[Infrared vehicle/ person detection scanner].
 Accessories:
[None].
[Galvanized sheet steel motor cover]. - For shutters with external direct drive motors only.
[Galvanized three sided, sheet steel hood cover].


top ^

Guidance

for Gilgen Rolegard High Security Shutters SR5

from Gilgen Door Systems UK Ltd

More about Gilgen Rolegard High Security Shutters SR5: As standard - Options - Approvals - Further information.

As standard

Security rating:

LPS 1175 SR 5 (issue 7) and Secured by Design approved.

Arrangement:

Internal face fixed.

Locking:

Automatic Self Locking system (ASL) which normally negates the need for secondary mechanical or electric locks. Tested to LPS 1175 (Issue 7) SR 5.

Wind Pressure:

BS EN 12424 Class 5 – Beaufort 13, 93 mph,1000 N/m² (hurricane).

Curtain:

Double skin heavy duty with reinforced core (smooth flat faced).

Options

Size:

  • Width: 2–8 m.
  • Height: 2–10 m.

Product reference:

- SR5-B–DSHD–CD:

  • Maximum door area: 64 m².
  • Operation: Three phase 415 V AC; chain drive (CD) motor complete with separate safety break and manual override hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%.
  • Ballistic rating – BS EN 1522 Windows, Door, Shutters and Blinds – Bullet Resistance, Requirements and Classification: Standard – FB3 (NS) No splinters, option FB4 (NS) No splinters.
  • Blast rated – up to 3 kPa (conditions apply).
  • Static load (weight of whole door assembly): Approximately 100–170 kg/m².
  • Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 5.

- SR5-B–DSHD–DD:

  • Maximum door area: 14 m².
  • Operation: Direct drive (DD) 415 V AC motor complete with emergency hand chain. Motor drive duty rating: Three phase motor duty rating Class S3 – 65%.
  • Ballistic rating – BS EN 1522 Windows, Door, Shutters and Blinds – Bullet Resistance, Requirements and Classification: Standard – FB3 (NS) No splinters, option FB4 (NS) No splinters.
  • Blast rated – up to 3 kPa (conditions apply).
  • Static load (weight of whole door assembly): Approximately 100–170 kg/m².
  • Locking: Pair of 24 V DC automatic solenoid anti-jacking bolts complete with a monitored control system and battery back-up. Tested to LPS 1175 (Issue 7) SR 5.

Performance:

  • Security rating; Loss Prevention Standard 1175 Issue 7 Security Rating 5, meeting all the requirements defined in sections 3 and 4 of the Loss Prevention Certification Board test standard.
  • Gilgen Door Systems understand that security risk ratings can be different for each application. The above SR ratings are provided for guidance purposes only and it is the responsibility of the specifier or customer to make the final interpretation and decision.
  • Approved by Secured by Design – The UK official Police design initiative to reduce crime governed by The Association of Chief Police Officers.

Controls:

A comprehensive range of vehicle detectors, hand transmitters, receiver units, push-button controls, key switches, safety edges, photocells, signal lights and digital control units are also available as alternatives or in addition to the standard control units. Contact manufacturer for further information.

Safety activation:

  • Dead man operation as standard which requires the operator to apply constant pressure to the door operating device (key switch or push button) as per BS EN 12453-5.5.1.
  • Remote or automatic door controls – minimum requirements, impact sensitive safety edge/ non contact safety beam.

Accessories:

  • Three-sided head cover; available for applications which may require improved aesthetic appearance or protection from local environmental conditions.
  • Removable motor cover; available to cover the exposed part of the drive motor which projects outside of the three sided head cover on the three phase design.
  • For applications which require a more substantial seal against water ingress, a suitably designed structural threshold arrangement is recommended – contact Gilgen for advice.

Approvals

  • Secured by Design . Secured by Design
  • LPCB .

Further Information

Literature:

RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Rolegard Commercial Shutters/ Grilles from Gilgen Door Systems UK LtdRolegard Commercial Shutters/ Grilles

The Rolegard series of steel and aluminium shutters and grilles has been specifically designed for internal and external use. The Rolegard range allows for manual or electric operation, vision, ventilation or insulation panels and a full range of finishes, offering flexibility of design and functionality to suit individual needs. Rolegard shutters and grilles are suitable for a multitude of commercial applications such as high street frontages, leisure facilities, offices, counter-top protection, stadiums, shopping centres, warehouses and car parks.Arrangement:Face fixed.Product reference:A wide range of models are available: - Rolegard Aluminium Punched and Glazed:A higher level of security whilst retaining good vision and light levels.Often a mix of solid and punched lath is used to provide extra integrity. - Rolegard Polycarbonate:Maximum vision is available with this innovative shutter. - Rolegard Steel Perforated Lath:High levels of security are provided by this steel shutter. - Rolegard Solid Shutters:The range of solid shutters meets the need for out-of-hours security with a choice of profiles.Installation is at worst discreet, and in the case of new builds, invisible until lowered.Sympathetic finishes ensure the shutters blend well with other architectural elements.Single and twin walled aluminium lath is employed to provide increasing levels of security.Finish:The standard finish is silver anodized aluminium or standard polyester powder coat colours and galvanized steel (perforated shutter).Additional non-standard polyester powder coat colours are also available for aluminium and steel shutters which may be incorporated to various exposed as required by the application.A number of special finishes are available for aluminium including marble together with a range of woodgrain effects.Operation: - Manual, Hand:Push up to open, pull down to close - ideal for small openings and infrequent use. - Standard Electrical:Size (w x h, maximum) 6000 x 4800 mm x approximately 20 m² - check with Kaba technical if near limits. Note special large sizes can be designed if required; contact Kaba technical department.Open and close using buttons (standard) or optional activation.In the event of power failure, the operator allows for easy manual operation, with the emergency hand chain drive or hand crank.Three phase external (415 volts) and single phase tubular (240 volts) operators with a range of control options are available.Drive: - Rolegard CS Internal Drive:Internal drive system uses either spring, rod crank or a tubular motor mounted within the shutter barrel.Sideroom and headroom requirements are kept to a minimum resulting in a very compact and neat installation.The system can be employed effectively across the range of shutters. - Rolegard CS External Drive:Applied to the larger shutter sizes and those applications where space is more generous or the shutter requires a heavier grade drive system. Alternatively the technically advanced KOAX™ drive system can be used.Automation and control:The range of control options is versatile enough to meet most applications.Safety (power operation):A range of safety systems are available.Manufacturer's standard - Push button/ key switch - impulse/ deadman operation.Remote control doors (minimum requirements), impact sensitive safety edge or additional secondary none contact safety beam.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=3

The Rolegard series of steel and aluminium shutters and grilles has been specifically designed for internal and external use. The Rolegard range allows for manual or electric operation, vision, ventilation or insulation panels and a full range of finishes, offering flexibility of design and functionality to suit individual needs. Rolegard shutters and grilles are suitable for a multitude of commercial applications such as high street frontages, leisure facilities, offices, counter-top protection, stadiums, shopping centres, warehouses and car parks.

More about Rolegard Commercial Shutters/ Grilles:
As standard - Options - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
[Rolegard Aluminium Punched and Glazed Shutter].
[Rolegard Polycarbonate Shutter].
[Rolegard Steel Perforated Lath Shutter].
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Shutter curtain:
  -Type:
[Aluminium].
[Galvanized steel].
  -Finish:
[Self-finished - galvanized steel].
[Self finish - silver anodized aluminium].
[Polyester powder coated].
  -Colour:
[Not applicable].
[BS]. - Insert BS colour reference.
[RAL]. - Insert RAL colour reference.
 Side guides:
[Heavy duty].
[High security ].
 Seals:
[Side guide seals]. - Aluminium only.
[Bottom seals]. - All specs.
 Operation:
[Manual, hand operation].
[Manual, hand crank operation]. - Aluminium models only.
[Electrical, single phase].
 Drive:
[Rolegard CS external].
[Rolegard CS internal].
 Control:
[Not required]. - Manual operation.
[Push button / key switch].
[Card reader / remote control].
 Safety (power operation):
[Standard ].
[Contact safety edge].
[None contact safety beam].
 Other requirements:
[None].
[Key operated centre lock].
[Padlockable bottom shoot bolt].


top ^

Guidance

for Rolegard Commercial Shutters/ Grilles

from Gilgen Door Systems UK Ltd

More about Rolegard Commercial Shutters/ Grilles: As standard - Options - Further information.

As standard

Arrangement:

Face fixed.

Options

Product reference:

A wide range of models are available:

- Rolegard Aluminium Punched and Glazed:

  • A higher level of security whilst retaining good vision and light levels.
  • Often a mix of solid and punched lath is used to provide extra integrity.

- Rolegard Polycarbonate:

Maximum vision is available with this innovative shutter.

- Rolegard Steel Perforated Lath:

High levels of security are provided by this steel shutter.

- Rolegard Solid Shutters:

  • The range of solid shutters meets the need for out-of-hours security with a choice of profiles.
  • Installation is at worst discreet, and in the case of new builds, invisible until lowered.
  • Sympathetic finishes ensure the shutters blend well with other architectural elements.
  • Single and twin walled aluminium lath is employed to provide increasing levels of security.

Finish:

  • The standard finish is silver anodized aluminium or standard polyester powder coat colours and galvanized steel (perforated shutter).
  • Additional non-standard polyester powder coat colours are also available for aluminium and steel shutters which may be incorporated to various exposed as required by the application.
  • A number of special finishes are available for aluminium including marble together with a range of woodgrain effects.

Operation:

- Manual, Hand:

Push up to open, pull down to close - ideal for small openings and infrequent use.

- Standard Electrical:

  • Size (w x h, maximum) 6000 x 4800 mm x approximately 20 m² - check with Kaba technical if near limits. Note special large sizes can be designed if required; contact Kaba technical department.
  • Open and close using buttons (standard) or optional activation.
  • In the event of power failure, the operator allows for easy manual operation, with the emergency hand chain drive or hand crank.
  • Three phase external (415 volts) and single phase tubular (240 volts) operators with a range of control options are available.

Drive:

- Rolegard CS Internal Drive:

  • Internal drive system uses either spring, rod crank or a tubular motor mounted within the shutter barrel.
  • Sideroom and headroom requirements are kept to a minimum resulting in a very compact and neat installation.
  • The system can be employed effectively across the range of shutters.

- Rolegard CS External Drive:

Applied to the larger shutter sizes and those applications where space is more generous or the shutter requires a heavier grade drive system. Alternatively the technically advanced KOAX™ drive system can be used.

Automation and control:

The range of control options is versatile enough to meet most applications.

Safety (power operation):

A range of safety systems are available.

  • Manufacturer's standard - Push button/ key switch - impulse/ deadman operation.
  • Remote control doors (minimum requirements), impact sensitive safety edge or additional secondary none contact safety beam.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Rolegard Commercial Aluminium Roller Shutter from Gilgen Door Systems UK LtdRolegard Commercial Aluminium Roller Shutter

The Rolegard Aluminium Series is specifically designed for maximum vision/ low security commercialapplications. The basic principles of design have a common thread across the range, yet with thevariety of options, an almost unlimited choice is available. Security, with visibility, special architecturalfinishes, unique materials and automation can be combined to meet the varied demands of shoppingmalls, high street frontage, leisure facilities, offices and commercial premises of all kinds.Drive:Internal drive system uses either spring, rod crank or a tubular motor mounted within the shutter barrel.Sideroom and headroom requirements are kept to a minimum resulting in a very compact and neat installation.The system can be employed effectively across the range of shutters.Features:Crisp sag-free lines provide an improvement on traditional tubular shutter systems.Lightweight aluminium profiles provide excellent vision and light whilst offering a level of security and visual deterrent.Finishes:Standard finish is milled aluminium.Optional polyester powder coating may be incorporated to various exposed parts as required by the application.Operation: - Manual, Hand:Push up to open, pull down to close. Ideal for small openings and infrequent use. - Manual, Hand Crank:Open and close using a hand crank arrangement for medium use applications. - Electrical:Open and close using buttons (standard) or optional activation.In the event of power failure, the operator allows for easy manual operation with the emergency hand chain drive or hand crank.Single phase tubular motor (240 volts) operators with a range of control options are available.Automation and control:The range of control options is versatile enough to meet most applications.Safety (power operation):A range of safety systems is available.Manufacturer's standard - Push button/ key switch - impulse/ deadman operation.Remote control doors - Minimum requirements, impact sensitive safety edge or additional secondary none contact safety beam.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=3

The Rolegard Aluminium Series is specifically designed for maximum vision/ low security commercialapplications. The basic principles of design have a common thread across the range, yet with thevariety of options, an almost unlimited choice is available. Security, with visibility, special architecturalfinishes, unique materials and automation can be combined to meet the varied demands of shoppingmalls, high street frontage, leisure facilities, offices and commercial premises of all kinds.

More about Rolegard Commercial Aluminium Roller Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Rolegard Commercial Aluminium Roller Shutters.
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Arrangement:
  -Type:
[Face fixed ].
[Between Jamb Fixed ].
  -Finish:
[Silver anodized aluminium].
[Polyester powder coated].
  -Colour:
[ ______ ] - Insert BS or RAL colour reference.
 Side guides:
[Heavy duty].
[High security ].
 Seals:
[Side guide seals].
[Bottom seals].
 Operation:
[Manual, hand operation].
[Manual, hand crank operation].
[Electrical operation]. - Single phase.
 Control:
[Not required]. - Manual operation.
[Push button / key switch].
[Card reader / remote control].
 Safety (power operation):
[Standard ].
[Contact safety edge].
[None contact safety beam].
 Other requirements:
[None].
[Key operated centre lock].
[Padlockable bottom shoot bolt].


top ^

Guidance

for Rolegard Commercial Aluminium Roller Shutter

from Gilgen Door Systems UK Ltd

More about Rolegard Commercial Aluminium Roller Shutter: As standard - Options - Further information.

As standard

Drive:

  • Internal drive system uses either spring, rod crank or a tubular motor mounted within the shutter barrel.
  • Sideroom and headroom requirements are kept to a minimum resulting in a very compact and neat installation.
  • The system can be employed effectively across the range of shutters.

Features:

  • Crisp sag-free lines provide an improvement on traditional tubular shutter systems.
  • Lightweight aluminium profiles provide excellent vision and light whilst offering a level of security and visual deterrent.

Options

Finishes:

  • Standard finish is milled aluminium.
  • Optional polyester powder coating may be incorporated to various exposed parts as required by the application.

Operation:

- Manual, Hand:

Push up to open, pull down to close. Ideal for small openings and infrequent use.

- Manual, Hand Crank:

Open and close using a hand crank arrangement for medium use applications.

- Electrical:

  • Open and close using buttons (standard) or optional activation.
  • In the event of power failure, the operator allows for easy manual operation with the emergency hand chain drive or hand crank.
  • Single phase tubular motor (240 volts) operators with a range of control options are available.

Automation and control:

The range of control options is versatile enough to meet most applications.

Safety (power operation):

A range of safety systems is available.

  • Manufacturer's standard - Push button/ key switch - impulse/ deadman operation.
  • Remote control doors - Minimum requirements, impact sensitive safety edge or additional secondary none contact safety beam.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Rolegard Industrial Steel Shutter from Gilgen Door Systems UK LtdRolegard Industrial Steel Shutter

The Rolegard Industrial Steel Shutter is a power operated single-skinned steel shutter consisting of concave, solid or perforated profiles. It offers good security, wind resistance or ventilation qualities and improved visual contact. The product is specifically designed for low to medium vehicle flow solutions.The doors comply with BS EN 12604 and BS EN 12453.Drive:Electric with a 'direct drive' motor system c/w an 'integral safety bearing' system. Mounted external to the shutter barrel assembly and head box (where applicable) are c/w electro-mechanical distance limitswitches and emergency manual hand chain override system, operable from ground level.Features:Manufactured from traditional 75 mm interlocking concave lath curtain (gauged according to size), galvanized steel bottom rail, side guides, mild steel primed endplates and barrel assembly. On large doors, wind endlocks are fitted to prevent excessive deflection and curtain retention.Frame/ Guides: 2.6–3 mm thick galvanized steel side guides, complete with articulated windlock.6–10 mm thick mild steel BZP steel end plate anchor brackets.Size:Maximum 48 m². Note larger areas can be supplied for internal applications where security and wind resistance levels can be agreed.Width (maximum): 8000 mm.Height (maximum): 7000 mm.Shutter curtain:The thickness of the main curtain lath sections varies to suit the shutter size and also project specificwind resistance requirements. Optional perforated lath profile (6500 mm maximum shutter width), canbe supplied for ventilation (up to 23% maximum air flow), or through-vision requirements.Finish:The main exposed metal work structure and optional casings are mainly galvanized self finish asstandard, but optional polyester powder coat finish can be supplied to the whole or part of the doorassemblies and the main curtain lath profiles and optional head casings can also be supplied with arange of HP200 Plastisol finishes to the external face. Special stainless steel materials can be supplied.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=3

The Rolegard Industrial Steel Shutter is a power operated single-skinned steel shutter consisting of concave, solid or perforated profiles. It offers good security, wind resistance or ventilation qualities and improved visual contact. The product is specifically designed for low to medium vehicle flow solutions.The doors comply with BS EN 12604 and BS EN 12453.

More about Rolegard Industrial Steel Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Rolegard Industrial Steel Shutter.
 Size:
[ ______ ] - Insert dimensions or refer to schedule.
 Arrangement:
[Face fixed].
[Reveal fixed].
 Shutter curtain:
  -Type:
[Perforated].
[Solid].
  -Finish:
[Galvanized].
[Plastisol coating].
[Polyester powder coated].
  -Colour:
[Not applicable].
[BS]. - Insert BS colour reference.
[RAL]. - Insert RAL colour reference.
 Operation:
[Direct drive motor]. - Standard.
[Pre-wired motor unit with isolator].
 Safety (power operation):
[Standard ].
[Contact safety edge].
[None contact safety beam].
 Activation:
[Digipad].
[Infrared vehicle/ person detection scanner].
[Key switch].
 Securing:
[Not required].
[Horizontal shoot bolts].
[PIN locks].
 Accessories:
[None].
[Raking bottom rail].
[Removable three sided motor cover].


top ^

Guidance

for Rolegard Industrial Steel Shutter

from Gilgen Door Systems UK Ltd

More about Rolegard Industrial Steel Shutter: As standard - Options - Further information.

As standard

Drive:

Electric with a 'direct drive' motor system c/w an 'integral safety bearing' system. Mounted external to the shutter barrel assembly and head box (where applicable) are c/w electro-mechanical distance limitswitches and emergency manual hand chain override system, operable from ground level.

Features:

  • Manufactured from traditional 75 mm interlocking concave lath curtain (gauged according to size), galvanized steel bottom rail, side guides, mild steel primed endplates and barrel assembly. On large doors, wind endlocks are fitted to prevent excessive deflection and curtain retention.
  • Frame/ Guides: 2.6–3 mm thick galvanized steel side guides, complete with articulated windlock.
  • 6–10 mm thick mild steel BZP steel end plate anchor brackets.

Options

Size:

  • Maximum 48 m². Note larger areas can be supplied for internal applications where security and wind resistance levels can be agreed.
  • Width (maximum): 8000 mm.
  • Height (maximum): 7000 mm.

Shutter curtain:

The thickness of the main curtain lath sections varies to suit the shutter size and also project specificwind resistance requirements. Optional perforated lath profile (6500 mm maximum shutter width), canbe supplied for ventilation (up to 23% maximum air flow), or through-vision requirements.

Finish:

The main exposed metal work structure and optional casings are mainly galvanized self finish asstandard, but optional polyester powder coat finish can be supplied to the whole or part of the doorassemblies and the main curtain lath profiles and optional head casings can also be supplied with arange of HP200 Plastisol finishes to the external face. Special stainless steel materials can be supplied.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Sectional Overhead Doors from Gilgen Door Systems UK LtdSectional Overhead Doors

Suited to a wide range of applications. Suitable for new build projects as well as in refurbishment situations. Key features:Energy efficient. Maximizes available opening space. Range of finishes and glazing options. Safe operation. Secure. Effective automation. Arrangement: Face fixed.Track arrangements:The alternatives allow for most openings and rooflines to be accommodated.Standard Lift (SL): For headroom between 500–700 mm.Low Headroom (LHR): For restricted headroom, typically 280 mm.High Lift (HL): For use in high roofed buildings or installations where additional clear height under the rear tracks is required.Full Vertical Lift (FVL): For use in high roofed buildings where height permits. Minimal intrusion into the building interior. Springs can be installed at low level for ease of access.Door leaf:Internal and external steel skins featuring a ribbed pattern, with a PVC thermal break.CFC-free polyurethane insulated foam injected core.Integral seals at the joints.U-value of 0.45 W/m².Height of individual panels 600 mm.Door panel:Galvanized steel inner and outer face infilled with high density polyurethane foam.Hardware:Galvanized steel hardware (hinges, tracks and roller holders) with nylon track rollers.Seals:Supplied as standard to the head, sidetracks, threshold and between each insulated panel. A flexible threshold seal is provided as standard to restrict water on a level threshold. If water penetration is an important factor on a particular application, then a purpose designed structural threshold is recommended.Security:A spring-loaded shootbolt operable from the inside only is provided on all doors. A lock providing access from the outside can be fitted. To comply with CE regulations and to protect the drive system a safety cut out switch is incorporated on all electrically operated doors.To comply with CE regulations a min class 2 impact sensitive Infra red safety edge system is supplied on the moving bottom edge of the bottom door panel on all electrically operated doors.Dimensions:Depending on track configuration, doors up to 8000 mm wide and 5000 mm high, with a maximum 40 m² are available as standard.Manual hand operated: Doors up to 3000 mm high and 9 m².Manual hand chain operated: Recommended maximum 40 m².Electrically operated. Full range available up to maximum sizes.Finish: - Standard:Internal – Stucco embossed polyester enamel, White (RAL9010).External – Stucco embossed polyester enamel color range: Sunset Red RAL3000, Silver RAL9006, Gentian Blue RAL5010, White RAL9002, Sepia Brown RAL8014, Bone White RAL9002, Anthracite RAL7016, Fir Green RAL6009, Grey Aluminum RAL 9007. - Plastisol:Albatross BS18B17, Goosewing Grey BS10A05, Leaf Green RAL6002, Merlin Grey BS18B25, Khaki BS12B21, Mushroom BS10B19, Azure Blue BS18C39, Olive Green BS12B27, Saphire RAL5003, Vandyke Brown BS08B29, Wedgewood BS18C37, White BS00E55, Sunflower BS10E55, Flame Red BS04E53, Cornflower Blue BS18E53. Also available: Factory painted finish, most BS and RAL colours.Operation: - Manual hand operation: Push up to open, pull down to close via pull cord provided. Ideal for small openings and infrequent use. - Manual hand chain operation: Open and close using a geared hand chain arrangement for medium use applications. - Electrical operation with emergency hand chain: Open and close using push internal buttons (standard) or optional activation. In the event of a power failure the operator allows for easy manual operation with the emergency hand chain drive, operable from low level. The door cannot be electrically operated whilst in the manual operation mode. Three phase (415 volts) and single phase (240 volts) operators with a range of control options are available.Glazing:Security bars can be added for enhanced security. A fully glazed version is also available - please contact manufacturer for further details.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=4

Suited to a wide range of applications. Suitable for new build projects as well as in refurbishment situations.

Key features:

  • Energy efficient.
  • Maximizes available opening space.
  • Range of finishes and glazing options.
  • Safe operation.
  • Secure.
  • Effective automation.

More about Sectional Overhead Doors:
As standard - Options - Further information.

PendingSECTIONAL OVERHEAD DOORS :
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Sectional Overhead Doors.
 Size:
[ ______ ] - Insert requirements, or drawing reference number where applicable.
 Track system:
[Full vertical lift (FVL)].
[Low headroom (LHR)].
[Standard lift (SL)].
 Internal sheet:
  -Finish:
[Factory painted].
[Plastisol].
[Stucco embossed polyester enamel]. - As standard.
  -Colour:
[ ______ ] - Insert requirements from guidance schedule.
 External sheet:
  -Finish:
[Factory painted].
[Plastisol].
[Stucco embossed polyester enamel]. - As standard.
  -Colour:
[ ______ ] - Insert requirements from guidance schedule.
 Operation:
[Electrical operation with emergency hand chain].
[Manual hand chain operation].
[Manual hand operation].
 Ironmongery:
[External lock].
[Spring-loaded shootbolt]. - As standard.
 Control:
[Card reader].
[External push button/ key switch].
[Pendant pull rope].
 Windows:
[Not required].
[Required, double glazed acrylic]. - Specify number of vision panels and number of rows.
 Pass door:
[Not required].
[Required].


top ^

Guidance

for Sectional Overhead Doors

from Gilgen Door Systems UK Ltd

More about Sectional Overhead Doors: As standard - Options - Further information.

As standard

Arrangement:

Face fixed.

Track arrangements:

The alternatives allow for most openings and rooflines to be accommodated.

  • Standard Lift (SL): For headroom between 500–700 mm.
  • Low Headroom (LHR): For restricted headroom, typically 280 mm.
  • High Lift (HL): For use in high roofed buildings or installations where additional clear height under the rear tracks is required.
  • Full Vertical Lift (FVL): For use in high roofed buildings where height permits. Minimal intrusion into the building interior. Springs can be installed at low level for ease of access.

Door leaf:

  • Internal and external steel skins featuring a ribbed pattern, with a PVC thermal break.
  • CFC-free polyurethane insulated foam injected core.
  • Integral seals at the joints.
  • U-value of 0.45 W/m².
  • Height of individual panels 600 mm.

Door panel:

Galvanized steel inner and outer face infilled with high density polyurethane foam.

Hardware:

Galvanized steel hardware (hinges, tracks and roller holders) with nylon track rollers.

Seals:

  • Supplied as standard to the head, sidetracks, threshold and between each insulated panel.
  • A flexible threshold seal is provided as standard to restrict water on a level threshold.
  • If water penetration is an important factor on a particular application, then a purpose designed structural threshold is recommended.

Security:

  • A spring-loaded shootbolt operable from the inside only is provided on all doors.
  • A lock providing access from the outside can be fitted.
  • To comply with CE regulations and to protect the drive system a safety cut out switch is incorporated on all electrically operated doors.
  • To comply with CE regulations a min class 2 impact sensitive Infra red safety edge system is supplied on the moving bottom edge of the bottom door panel on all electrically operated doors.

Options

Dimensions:

Depending on track configuration, doors up to 8000 mm wide and 5000 mm high, with a maximum 40 m² are available as standard.

  • Manual hand operated: Doors up to 3000 mm high and 9 m².
  • Manual hand chain operated: Recommended maximum 40 m².
  • Electrically operated. Full range available up to maximum sizes.

Finish:

- Standard:

  • Internal – Stucco embossed polyester enamel, White (RAL9010).
  • External – Stucco embossed polyester enamel color range: Sunset Red RAL3000, Silver RAL9006, Gentian Blue RAL5010, White RAL9002, Sepia Brown RAL8014, Bone White RAL9002, Anthracite RAL7016, Fir Green RAL6009, Grey Aluminum RAL 9007.

- Plastisol:

Albatross BS18B17, Goosewing Grey BS10A05, Leaf Green RAL6002, Merlin Grey BS18B25, Khaki BS12B21, Mushroom BS10B19, Azure Blue BS18C39, Olive Green BS12B27, Saphire RAL5003, Vandyke Brown BS08B29, Wedgewood BS18C37, White BS00E55, Sunflower BS10E55, Flame Red BS04E53, Cornflower Blue BS18E53. Also available: Factory painted finish, most BS and RAL colours.

Operation:

- Manual hand operation:

Push up to open, pull down to close via pull cord provided. Ideal for small openings and infrequent use.

- Manual hand chain operation:

Open and close using a geared hand chain arrangement for medium use applications.

- Electrical operation with emergency hand chain:

  • Open and close using push internal buttons (standard) or optional activation. In the event of a power failure the operator allows for easy manual operation with the emergency hand chain drive, operable from low level.
  • The door cannot be electrically operated whilst in the manual operation mode.
  • Three phase (415 volts) and single phase (240 volts) operators with a range of control options are available.

Glazing:

  • Security bars can be added for enhanced security.
  • A fully glazed version is also available - please contact manufacturer for further details.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 

View larger image of Delta Steel Folding Shutter Door from Gilgen Door Systems UK LtdDelta Steel Folding Shutter Door

Manufactured from 230 mm galvanized ribbed steel leaves with patented one-piece picket, lattice assembly and heavy duty steel leading edge. Door unit is supported by steel roller bearings in the top track and is guided by a galvanized bottom channel. Supplied complete with 260 mm wide soffit, pull handles, hasp and staple to receive user's own padlock, brush strips fitted to bottom of leaves.Features:Weight of whole door assembly: 30kg/ m².Leaves can be removed and replaced without dismantling the shutter.Resistance to wind load: BS EN 12424, Class 5.Motor and control: Environmental ingress level, IP54.Motor Drive duty rating: Class S3 - 60%.Top track: 60 x 75 mm tubular galvanized steel.Arrangement:Single door, maximum dimensions (w x h): 10175 mm x 6000 mm - larger sizes possible for internal applications, subject to application.Double door, maximum dimensions (w x h): 20350 mm x 6000 mm - larger sizes possible for internal applications, subject to application.Inside reveal (IR) where the door is fixed to the inside and the bunch is fixed behind the jamb - Standard.Outside reveal (OR) where the door is fixed to the outside and the bunch is fixed in front of the jamb.Between jambs (BJ) where the door is internally fixed to the lintel and the bunch is fixed between jambs.Finish:Galvanized steel.Plastisol coated steel in a range of standard colours.Polyester powder coated steel in a range of standard colours.Operation:Manual: Push/ Pull handles mounted on leading edge of door bunch.Electrical with slipping torque clutch: High level, track mounted, geared drive unit connected to 'endless' roller chain and the leading edge of the door assembly. Supplied with low level, wall-mounted, push-button starter, to be mounted within line of sight of moving door. Emergency manual operation by disconnecting the motor drive chain from the leading edge.Electrical with track-mounted limit switches.Casings:Galvanised canopy to cover the head of the shutter for external doors.Side closure flashings.Vision panels:102 wide x 230 mm deep clear toughened glass in alternate leaves within the door, retained by black rubber gaskets.Ironmongery:Heavy duty hasp & staple, fitted to inside of the leading edge profile to accept user's padlock.Five- lever brass hookbolt lock, face fitted internally to leading edge to accept user's padlock.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=03743&f=COL264135.pdf&pg=8

Manufactured from 230 mm galvanized ribbed steel leaves with patented one-piece picket, lattice assembly and heavy duty steel leading edge. Door unit is supported by steel roller bearings in the top track and is guided by a galvanized bottom channel. Supplied complete with 260 mm wide soffit, pull handles, hasp and staple to receive user's own padlock, brush strips fitted to bottom of leaves.

More about Delta Steel Folding Shutter Door:
As standard - Options - Further information.

PendingDOORS:
 Manufacturer:
Gilgen Door Systems UK Ltd.
  -Web:www.gilgendoorsystems.co.uk.
  -Tel:+44 (0)800 316 6994.
  -Product reference:
Delta Steel Folding Shutter Door.
 Arrangement:
  -Type:
[Single door between jambs (BJ)].
[Single door, inside reveal (IR)].
[Single door, outside reveal (OR)].
  -Bottom track:
['M' profile galvanized steel]. - Standard.
[Heavy duty with retention bolts].
 Door leaf:
  -Inserts:
[Not required].
[Personnel access door]. - Manually operated doors only.
[Vision panels].
  -Finish:
[Galvanized steel ]. - Standard.
[Plastisol coated, colour]. - Insert colour reference.
[Polyester powder coated, colour]. - Insert colour reference.
  -Operation:
[Manual].
[Electrical with slipping torque clutch].
[Electrical with track-mounted limit switches].
 Ironmongery:
[Five-lever brass hookbolt lock].
[Heavy duty hasp and staple]. - Standard
 Casings:
[Galvanized canopy].
[Side closure flashings].


top ^

Guidance

for Delta Steel Folding Shutter Door

from Gilgen Door Systems UK Ltd

More about Delta Steel Folding Shutter Door: As standard - Options - Further information.

As standard

Features:

  • Weight of whole door assembly: 30kg/ m².
  • Leaves can be removed and replaced without dismantling the shutter.
  • Resistance to wind load: BS EN 12424, Class 5.
  • Motor and control: Environmental ingress level, IP54.
  • Motor Drive duty rating: Class S3 - 60%.
  • Top track: 60 x 75 mm tubular galvanized steel.

Options

Arrangement:

  • Single door, maximum dimensions (w x h): 10175 mm x 6000 mm - larger sizes possible for internal applications, subject to application.
  • Double door, maximum dimensions (w x h): 20350 mm x 6000 mm - larger sizes possible for internal applications, subject to application.
  • Inside reveal (IR) where the door is fixed to the inside and the bunch is fixed behind the jamb - Standard.
  • Outside reveal (OR) where the door is fixed to the outside and the bunch is fixed in front of the jamb.
  • Between jambs (BJ) where the door is internally fixed to the lintel and the bunch is fixed between jambs.

Finish:

  • Galvanized steel.
  • Plastisol coated steel in a range of standard colours.
  • Polyester powder coated steel in a range of standard colours.

Operation:

  • Manual: Push/ Pull handles mounted on leading edge of door bunch.
  • Electrical with slipping torque clutch: High level, track mounted, geared drive unit connected to 'endless' roller chain and the leading edge of the door assembly. Supplied with low level, wall-mounted, push-button starter, to be mounted within line of sight of moving door. Emergency manual operation by disconnecting the motor drive chain from the leading edge.
  • Electrical with track-mounted limit switches.

Casings:

  • Galvanised canopy to cover the head of the shutter for external doors.
  • Side closure flashings.

Vision panels:

  • 102 wide x 230 mm deep clear toughened glass in alternate leaves within the door, retained by black rubber gaskets.

Ironmongery:

  • Heavy duty hasp & staple, fitted to inside of the leading edge profile to accept user's padlock.
  • Five- lever brass hookbolt lock, face fitted internally to leading edge to accept user's padlock.

Further Information

Literature:


RIBA CPD

CPD information is available for Gilgen Door Systems UK Ltd from ribacpd.com.

RIBA Product Selector

Additional information may be available for Gilgen Door Systems UK Ltd from ribaproductselector.com.

Contacts:

www.gilgendoorsystems.co.uk

info@gilgendoorsystems.co.uk

T: +44 (0)800 316 6994

F: +44 (0)800 316 6995

top ^

 
Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 12 December 2017