A-Z Manufacturers (Dagard SAS) |  CAWS Index (K40 265)
Dagard SAS

Dagard SAS

www.dagard.com/gb/

T: +33 (0)555 824000

Route du Stade, 23600 Boussac, France

This NBS Plus page covers ceiling panel

relating to clause 265 INFILL UNITS

in K40 Demountable suspended ceilings.

For more NBS Plus information from this company, see the Dagard SAS overview page which includes a clause list and a product list.


Products from Dagard SAS

Bookmark
PSM60 - Ceiling panel with a metal facing and a mineral wool core.
Bookmark
PST60 - Ceiling panel with a metal facing and an aluminium honeycomb core.
 

View larger image of PSM60 from Dagard SASPSM60

The ceiling is designed for rooms which must be kept completely free of microbiological contamination.The non-combustible modular panels are 60 mm thick and manufactured from time-stable materials and no emitting particles.The ceiling provides smooth surfaces which are easy to clean, are air-tight and offer good insulation.Components:Core: Hydrophobic rock wool plates. Density: 100 kg/m³. Fire reaction according to EN 13501-1: A1.Adhesive: Bi-component polyurethane.Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).Polymer MS caulk.Flexible sealant in closed cell reticulate polyethene adhesive strips (over the ceiling), density 50 kg/m³.The system uses an aluminium key profile that is integrated into the grooves of the four sides of the ceiling panel. A metallic profile is integrated into the grooves in order to hang the ceiling panels to the building structure.On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).Panel:- Thickness:60 mm.- Profile:Metallic profile for passage of cables.Acceptable span in ceiling:Without opening: 2.4 m (walkable), 3.2 m (non-walkable).With opening: 1.6–2.4 m (walkable), 2.4–3.2 m (non-walkable), depending on configuration. Consult literature for details.Loads taken into account for measurement: 60 daN/m² (panel weight included, panel on two supports) plus 150 daN (if accessible ceiling, concentrated load at any point of the ceiling).Small sections can be cut out (width: <600 mm) without compromising the safety of the ceiling.With non-standard openings (width: >0.665 m and/ or area: >0.45 m²) it is necessary to use additional fastening joist.The ceiling is not a technical platform; for maintenance, it will support the passage of one person.Technical characteristics:Thermal conductivity coefficient lambda: 0.041 W/mK.Thermal transmission coefficient Uc: 0.612 W/mK.R-value: 1.6.Acceptable resisting to buckling: ≥210 kPa (2.1 daN/cm²).Weight 17 kg/m² (two faces, 0.6 mm thick).Fire reaction: Euroclass A2-s1,d0 and Class 0.Flame spread index (ASTM E84-01): Class 1.Flame spread (BS 476-7): Class 1.Fire spread index (BS 476-6): 0.7.0FM approval (standard 4880)Class 10UL approval (cable routing)Safety E471046

The ceiling is designed for rooms which must be kept completely free of microbiological contamination.

The non-combustible modular panels are 60 mm thick and manufactured from time-stable materials and no emitting particles.

The ceiling provides smooth surfaces which are easy to clean, are air-tight and offer good insulation.

Components:

  • Core: Hydrophobic rock wool plates. Density: 100 kg/m³. Fire reaction according to EN 13501-1: A1.
  • Adhesive: Bi-component polyurethane.
  • Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).
  • Polymer MS caulk.
  • Flexible sealant in closed cell reticulate polyethene adhesive strips (over the ceiling), density 50 kg/m³.

The system uses an aluminium key profile that is integrated into the grooves of the four sides of the ceiling panel. A metallic profile is integrated into the grooves in order to hang the ceiling panels to the building structure.

On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).

More about PSM60:
As standard - Approvals - Further information.

PendingCEILING PANEL:
 Manufacturer:
Dagard SAS.
  -Web:www.dagard.com/gb/.
  -Tel:+33 (0)555 824000.
  -Product reference:
PSM60.
 Panel:
  -Width:
[350 mm].
[550 mm].
[1200 mm]. - 6000 mm maximum length only.
  -Length:
[4000 mm].
[6000 mm].
 Facing:
  -Thickness:
[0.5 mm]. - Polyester 25 μm lacquer finish only.
[0.6 mm]. - Standard.
[0.8 mm]. - Polyester 25 μm lacquer and stainless steel polished S4 finishes only.
  -Material:
[Smooth stainless steel sheet, 1.4307 (304 L) grade].
[Smooth stainless steel sheet, 1.4404 (316 L) grade].
[Steel sheet S280 GD, hot-dip galvanized Z225]. - 225 g/m² of zinc on the two faces or similar.
  -Coating:
[Polished S4]. - Stainless steel only.
[Polyester 25 µm lacquer]. - Class in accordance with XP P 34-301: lIIa.
[Polyester lacquer and PET film of total thickness 55 µm]. - Class in accordance with XP P 34-301: Vc.
 Colour/ Finish:
Iceberg white (similar to RAL 9010).


top ^

Guidance

for PSM60

from Dagard SAS

More about PSM60: As standard - Approvals - Further information.

As standard

Panel:

- Thickness:

60 mm.

- Profile:

Metallic profile for passage of cables.

Acceptable span in ceiling:

  • Without opening: 2.4 m (walkable), 3.2 m (non-walkable).
  • With opening: 1.6–2.4 m (walkable), 2.4–3.2 m (non-walkable), depending on configuration. Consult literature for details.
  • Loads taken into account for measurement: 60 daN/m² (panel weight included, panel on two supports) plus 150 daN (if accessible ceiling, concentrated load at any point of the ceiling).
  • Small sections can be cut out (width: <600 mm) without compromising the safety of the ceiling.
  • With non-standard openings (width: >0.665 m and/ or area: >0.45 m²) it is necessary to use additional fastening joist.
  • The ceiling is not a technical platform; for maintenance, it will support the passage of one person.

Technical characteristics:

  • Thermal conductivity coefficient lambda: 0.041 W/mK.
  • Thermal transmission coefficient Uc: 0.612 W/mK.
  • R-value: 1.6.
  • Acceptable resisting to buckling: ≥210 kPa (2.1 daN/cm²).
  • Weight 17 kg/m² (two faces, 0.6 mm thick).
  • Fire reaction: Euroclass A2-s1,d0 and Class 0.
  • Flame spread index (ASTM E84-01): Class 1.
  • Flame spread (BS 476-7): Class 1.
  • Fire spread index (BS 476-6): 0.7.

Approvals

  • FM approval (standard 4880): Class 1.
  • UL approval (cable routing): Safety E471046.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Dagard SAS from ribaproductselector.com.

Contacts:

www.dagard.com/gb/

T: +33 (0)555 824000

top ^

 

View larger image of PST60 from Dagard SASPST60

The ceiling is designed for rooms which must be kept completely free of microbiological contamination.The non-combustible modular panels are 60 mm thick and manufactured from time-stable materials and no emitting particles.The ceiling provides smooth surfaces which are easy to clean, are air-tight and offer good insulation.A metallic profile is integrated into the grooves in order to hang the ceiling panels to the building structure.Components:Core: Aluminium honeycomb, link diameter 19 mm metal strip thickness 70 μ (ceiling panel). Alloy 3003 (EN 573 standard), with a rustproof treatment. Density: 28 kg/m³ (70 μ). Fire reaction: Non-combustible. Resistance to compression: Average value of 270 kPa.Adhesive: Bi-component polyurethane.Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).Polymer MS caulk.Flexible sealant in closed cell reticulate polyethene adhesive strips (over the ceiling), density of 50 kg/m³.On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).Panel:- Thickness:60 mm.- Profile:Metallic profile for passage of cables.Acceptable span in ceiling:Without opening: 3 m (walkable), 5 m (non-walkable).With opening: 2–2.8 m (walkable), 2.4–4 m (non-walkable), depending on configuration. Consult literature for details.Loads taken into account for measurement: 60 daN/m² (panel weight included, panel on two supports) plus 150 daN (if accessible ceiling, concentrated load at any point of the ceiling).Small sections can be cut out (width: <600 mm) without compromising the safety of the ceiling.With nonstandard openings (width: >0.665 m and/ or area: >0.45 m²) it is necessary to use additional fastening joist.The ceiling is not a technical platform; for maintenance, it will support the passage of one person.Permissible loads:Varies depending on span and beam; consult literature for details.Technical characteristics:Weight: 10.7 kg/m² (two faces, 0.5 mm thick steel); 6.9 kg/m² (two faces, 0.67 mm aluminium).Fire reaction: Euroclass A2-s1,d0.0FM approval (standard 4880)Class 10UL approval (cable routing)Safety E471046

The ceiling is designed for rooms which must be kept completely free of microbiological contamination.

The non-combustible modular panels are 60 mm thick and manufactured from time-stable materials and no emitting particles.

The ceiling provides smooth surfaces which are easy to clean, are air-tight and offer good insulation.

A metallic profile is integrated into the grooves in order to hang the ceiling panels to the building structure.

Components:

  • Core: Aluminium honeycomb, link diameter 19 mm metal strip thickness 70 μ (ceiling panel). Alloy 3003 (EN 573 standard), with a rustproof treatment. Density: 28 kg/m³ (70 μ). Fire reaction: Non-combustible. Resistance to compression: Average value of 270 kPa.
  • Adhesive: Bi-component polyurethane.
  • Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).
  • Polymer MS caulk.
  • Flexible sealant in closed cell reticulate polyethene adhesive strips (over the ceiling), density of 50 kg/m³.

On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).

More about PST60:
As standard - Approvals - Further information.

PendingCEILING PANEL:
 Manufacturer:
Dagard SAS.
  -Web:www.dagard.com/gb/.
  -Tel:+33 (0)555 824000.
  -Product reference:
PST60.
 Panel:
  -Width:
[350 mm].
[550 mm].
[1200 mm]. - 6000 mm maximum length only.
  -Length:
[4000 mm].
[6000 mm].
 Facing:
  -Thickness:
[0.5 mm]. - Polyester 25 μm lacquer finish only.
[0.6 mm]. - Standard.
[0.8 mm]. - Polyester 25 μm lacquer and stainless steel polished S4 finishes only.
  -Material:
[Smooth stainless steel sheet, 1.4307 (304 L) grade].
[Smooth stainless steel sheet, 1.4404 (316 L) grade].
[Steel sheet S280 GD, hot-dip galvanized Z225]. - 225 g/m² of zinc on the two faces or similar.
    Coating:
[Polished S4]. - Stainless steel only.
[Polyester 25 µm lacquer]. - Class in accordance with XP P 34-301: lIIa.
[Polyester lacquer and PET film of total thickness 55 µm]. - Class in accordance with XP P 34-301: Vc.
 Colour/ Finish:
Iceberg white (similar to RAL 9010).


top ^

Guidance

for PST60

from Dagard SAS

More about PST60: As standard - Approvals - Further information.

As standard

Panel:

- Thickness:

60 mm.

- Profile:

Metallic profile for passage of cables.

Acceptable span in ceiling:

  • Without opening: 3 m (walkable), 5 m (non-walkable).
  • With opening: 2–2.8 m (walkable), 2.4–4 m (non-walkable), depending on configuration. Consult literature for details.
  • Loads taken into account for measurement: 60 daN/m² (panel weight included, panel on two supports) plus 150 daN (if accessible ceiling, concentrated load at any point of the ceiling).
  • Small sections can be cut out (width: <600 mm) without compromising the safety of the ceiling.
  • With nonstandard openings (width: >0.665 m and/ or area: >0.45 m²) it is necessary to use additional fastening joist.
  • The ceiling is not a technical platform; for maintenance, it will support the passage of one person.

Permissible loads:

Varies depending on span and beam; consult literature for details.

Technical characteristics:

  • Weight: 10.7 kg/m² (two faces, 0.5 mm thick steel); 6.9 kg/m² (two faces, 0.67 mm aluminium).
  • Fire reaction: Euroclass A2-s1,d0.

Approvals

  • FM approval (standard 4880): Class 1.
  • UL approval (cable routing): Safety E471046.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Dagard SAS from ribaproductselector.com.

Contacts:

www.dagard.com/gb/

T: +33 (0)555 824000

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017