A-Z Manufacturers (Dagard SAS) |  CAWS Index (K30 10)
Dagard SAS

Dagard SAS

www.dagard.com/gb/

T: +33 (0)555 824000

Route du Stade, 23600 Boussac, France

This NBS Plus page covers modular partition with removable cladding and partition

relating to clause 10 RELOCATABLE PARTITION SYSTEM

in K30 Panel partitions.

For more NBS Plus information from this company, see the Dagard SAS overview page which includes a clause list and a product list.


Products from Dagard SAS

Bookmark
SD90 - Modular partition SD with removable cladding.
Bookmark
SM60 - Partition with a metal facing and mineral wool core.
Bookmark
ST60 - Partition with a metal facing and an aluminium honeycomb core.
 

View larger image of SD90 from Dagard SASSD90

Modular partition manufactured from a metallic stud frame and two individually removable skinned panels, allowing the easy incorporation of any services routing, wiring or components.Partition overall thickness: 90 mm (standard), can be increased to suit project requirements.Airtightness is achieved by a bead of mastic (clean room grade silicone caulk, MS Polymer, chemical cold weld) applied on site in the calibrated gaps for all skins.Components:The galvanized steel structural frame consists of:Metallic rails (top and bottom).Proprietary vertical notched metallic studs adjustable in height, placed every 1100 or 1200 mm (optional sub-module).Noggins, cross-members and specific accessories available for incorporation of doors, glazing or specific equipment.Removable cladding:Metallic single or double sided panels.Finished cladding manufactured from thick galvanized steel sheets (0.8 mm), backed with plasterboard/ gypsum wall board (GWB) or aluminium honeycomb core; total thickness 18 mm. Vertically clipped on the studs, with a pre-set gap of 3 mm provided for silicone caulk (gap 0.5 mm for cold welded seal).Doors:Hinged or sliding doors, with one or two leaves available with:A wide range of sizes.Aluminium or lacquered steel door frame (heat-cured epoxy-polyester powder paint, choice of colour).Stainless steel variant set flush on one side or the other, or centred in the partition thickness.Leaves of thickness 60 mm with metallic or high pressure laminate (HPL) facings, choice of colour.Optionally available glazed or flush vision panel, selection of hardware, interlocking management, motorized system and kick plate protection.Glazed modules:Airtight double glass window system with toughened laminated safety glass, double flush.Dimensions on request according to the partition layout.Optional integrated (flush) manual or electrical blinds available.Single size lining partition or two lift panels are optionally available.Module width:1100 mm.

Modular partition manufactured from a metallic stud frame and two individually removable skinned panels, allowing the easy incorporation of any services routing, wiring or components.

Partition overall thickness: 90 mm (standard), can be increased to suit project requirements.

Airtightness is achieved by a bead of mastic (clean room grade silicone caulk, MS Polymer, chemical cold weld) applied on site in the calibrated gaps for all skins.

Components:

The galvanized steel structural frame consists of:

  • Metallic rails (top and bottom).
  • Proprietary vertical notched metallic studs adjustable in height, placed every 1100 or 1200 mm (optional sub-module).
  • Noggins, cross-members and specific accessories available for incorporation of doors, glazing or specific equipment.

Removable cladding:

  • Metallic single or double sided panels.
  • Finished cladding manufactured from thick galvanized steel sheets (0.8 mm), backed with plasterboard/ gypsum wall board (GWB) or aluminium honeycomb core; total thickness 18 mm. Vertically clipped on the studs, with a pre-set gap of 3 mm provided for silicone caulk (gap 0.5 mm for cold welded seal).

Doors:

Hinged or sliding doors, with one or two leaves available with:

  • A wide range of sizes.
  • Aluminium or lacquered steel door frame (heat-cured epoxy-polyester powder paint, choice of colour).
  • Stainless steel variant set flush on one side or the other, or centred in the partition thickness.
  • Leaves of thickness 60 mm with metallic or high pressure laminate (HPL) facings, choice of colour.
  • Optionally available glazed or flush vision panel, selection of hardware, interlocking management, motorized system and kick plate protection.

Glazed modules:

  • Airtight double glass window system with toughened laminated safety glass, double flush.
  • Dimensions on request according to the partition layout.
  • Optional integrated (flush) manual or electrical blinds available.

Single size lining partition or two lift panels are optionally available.

More about SD90:
As standard - Further information.

PendingMODULAR PARTITION WITH REMOVABLE CLADDING:
 Manufacturer:
Dagard SAS.
  -Web:www.dagard.com/gb/.
  -Tel:+33 (0)555 824000.
  -Product reference:
SD90.
 Height:
[ ______ ] - 3000 mm (maximum). Stackable if required. Consult manufacturer and insert requirements.
 Cladding:
  -Type:
[Double sided].
[Single sided].
  -Material/ Finish:
[Galvanized steel 8/10th plus PET 55 µm, iceberg white colour (similar to RAL 9010)].
[Stainless steel sheet 8/10th].
[Stainless steel sheet 8/10th plus antibacterial PVC film 150 µm].
 Doors:
  -Type:
[Hinged].
[Sliding].
  -Leaf:
[One].
[Two].
  -Material:
[ ______ ] - Consult manufacturer and insert requirements.
  -Colour/ Finish:
[ ______ ] - Consult manufacturer and insert requirements.
  -Vision panel:
[Not required].
[Flush].
[Glazed].
  -Accessories:
[Not required].
[Hardware].
[Interlocking management].
 Glazing:
  -Size:
[ ______ ] - Consult manufacturer and insert requirements.
  -Blinds:
[Not required].
[Electric].
[Manual].
 Accessories/ Other requirements:
[None].
[Cross-members].
[Noggins].


top ^

Guidance

for SD90

from Dagard SAS

More about SD90: As standard - Further information.

As standard

Module width:

1100 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Dagard SAS from ribaproductselector.com.

Contacts:

www.dagard.com/gb/

T: +33 (0)555 824000

top ^

 

View larger image of SM60 from Dagard SASSM60

The SM60 partition is designed for ultra-clean rooms which must be kept completely free of microbiological contamination.The partition consists of non-combustible modular panels, 60 mm thick, manufactured from time-stable materials and no emitting particles.The partition provides smooth surfaces which are easy to clean, are airtight and offer good insulation.Components:Core: Hydrophobic rock wool plates. Density: 80 kg/m³. Fire class according to EN 13501-1: A1.Adhesive: Bi-component polyurethane.Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).Polymer MS caulk.Profiles integrated into the thickness of SM panels allow the assembly of panels and the passage of cables. The system uses an aluminium key profile that is inserted into the full-length grooves on both sides of the wall panels. A special feature without the link profile allows the partition to become removable panel by panel, due to stainless steel clips.On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).Vertical panel thickness:60 mm.Panel profile:Metallic profile for passage of cables.Maximum acceptable loads:Bending resistance, panels on two supports:2.5 m high: 75 q (daN/m²).3 m high: 55 q (daN/m²).3.5 m high: 42 q (daN/m²).4 m high: 30 q (daN/m²).≥ 4.5 m high: 20 q (daN/m²).Technical characteristics:Thermal conductivity coefficient lambda: 0.041 W/mK.Thermal transmission coefficient Uc: 0.612 W/mK.R-value: 1.6.Acceptable resisting to buckling: ≥210 kPa (2.1 daN/cm²).Weight 17 kg/m² (two faces, 0.6 mm thick).Tightness in the whole partition with silicone joint: Qs ≤0,0027 m³/h.m² under ΔP: 50 Pa.Fire reaction: Euroclass A2-s1,d0 and Class 0.Flame spread index (ASTM E84-01): Class 1.Flame spread (BS 476-7): Class 1.Fire spread index (BS 476-6): 0.7.0FM approval (standard 4880)Class 10UL approval (cable routing)Safety E471046

The SM60 partition is designed for ultra-clean rooms which must be kept completely free of microbiological contamination.

The partition consists of non-combustible modular panels, 60 mm thick, manufactured from time-stable materials and no emitting particles.

The partition provides smooth surfaces which are easy to clean, are airtight and offer good insulation.

Components:

  • Core: Hydrophobic rock wool plates. Density: 80 kg/m³. Fire class according to EN 13501-1: A1.
  • Adhesive: Bi-component polyurethane.
  • Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).
  • Polymer MS caulk.

Profiles integrated into the thickness of SM panels allow the assembly of panels and the passage of cables. The system uses an aluminium key profile that is inserted into the full-length grooves on both sides of the wall panels. A special feature without the link profile allows the partition to become removable panel by panel, due to stainless steel clips.

On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).

More about SM60:
As standard - Approvals - Further information.

PendingPARTITION:
 Manufacturer:
Dagard SAS.
  -Web:www.dagard.com/gb/.
  -Tel:+33 (0)555 824000.
  -Product reference:
SM60.
 Vertical panel:
  -Width:
[200 mm].
[250 mm].
[350 mm].
  -Length:
[4000 mm].
[6000 mm].
 Facing:
  -Thickness:
[0.5 mm]. - Polyester 25 μm lacquer finish only.
[0.6 mm]. - Standard.
[0.8 mm]. - Polyester 25 μm lacquer and stainless steel polished S4 finishes only.
  -Material:
[Smooth stainless steel sheet, 1.4307 (304 L) grade].
[Smooth stainless steel sheet, 1.4404 (316 L) grade].
[Steel sheet S280 GD, hot-dip galvanized Z225]. - 225 g/m² of zinc on the two faces or similar.
    Coating:
[Polished S4]. - Stainless steel only.
[Polyester 25 µm lacquer]. - Class in accordance with XP P 34-301: lIIa.
[Polyester lacquer and PET film of total thickness 55 µm]. - Class in accordance with XP P 34-301: Vc.
 Coating:
Iceberg white (similar to RAL 9010).


top ^

Guidance

for SM60

from Dagard SAS

More about SM60: As standard - Approvals - Further information.

As standard

Vertical panel thickness:

60 mm.

Panel profile:

Metallic profile for passage of cables.

Maximum acceptable loads:

  • Bending resistance, panels on two supports:
  • 2.5 m high: 75 q (daN/m²).
  • 3 m high: 55 q (daN/m²).
  • 3.5 m high: 42 q (daN/m²).
  • 4 m high: 30 q (daN/m²).
  • ≥ 4.5 m high: 20 q (daN/m²).

Technical characteristics:

  • Thermal conductivity coefficient lambda: 0.041 W/mK.
  • Thermal transmission coefficient Uc: 0.612 W/mK.
  • R-value: 1.6.
  • Acceptable resisting to buckling: ≥210 kPa (2.1 daN/cm²).
  • Weight 17 kg/m² (two faces, 0.6 mm thick).
  • Tightness in the whole partition with silicone joint: Qs ≤0,0027 m³/h.m² under ΔP: 50 Pa.
  • Fire reaction: Euroclass A2-s1,d0 and Class 0.
  • Flame spread index (ASTM E84-01): Class 1.
  • Flame spread (BS 476-7): Class 1.
  • Fire spread index (BS 476-6): 0.7.

Approvals

  • FM approval (standard 4880): Class 1.
  • UL approval (cable routing): Safety E471046.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Dagard SAS from ribaproductselector.com.

Contacts:

www.dagard.com/gb/

T: +33 (0)555 824000

top ^

 

View larger image of ST60 from Dagard SASST60

The ST60 partition is designed for rooms which must be kept completely free of microbiological contamination.The partition consists of non-combustible modular panels, 60 mm thick, manufactured from time-stable materials and no emitting particles.The partition provides smooth surfaces which are easy to clean, are airtight and offer good insulation.Components:Core: Aluminium honeycomb, link diameter 19 mm, metal strip thickness 50 µm (vertical panels). Alloy 3003 (EN 573 standard), with rustproof treatment. Density: 20 kg/m³ (50 µ). Fire reaction: Non-combustible. Resistance to compression: Average value: 270 kPa.Adhesive: Bi-component polyurethane.Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).Polymer MS caulk.Profiles integrated into the thickness of ST panels allow the assembly of panels and the passage of cables. The system uses an aluminium key profile that is inserted into the full-length grooves on both sides of the wall panels. A special feature without the link profile allows the partition to become removable panel by panel, due to stainless steel clips.On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).Panel:- Thickness:60 mm.- Profile:Metallic profile for passage of cables.Maximum acceptable loads:Bending resistance, panels on two supports:2.5 m high: 75 q (daN/m²).3 m high: 55 q (daN/m²).3.5 m high: 42 q (daN/m²).4 m high: 30 q (daN/m²).≤5.80 m high: 20 q (daN/m²).Technical characteristics:Thermal conductivity coefficient lambda: 0.041 W/mK.Thermal transmission coefficient Uc: 0.612 W/mK.R-value: 1.6.Weight 10.7 kg/m² (two faces, 0.5 mm thick steel); 6.9 kg/m² (two faces, 0.67 mm aluminium).Tightness in the whole partition with silicone joint: Qs ≤0.0027 m³/h.m² under ΔP: 50 Pa.Fire reaction: Euroclass A2-s1,d0.0FM approval (standard 4880)Class 10UL approval (cable routing)Safety E471046

The ST60 partition is designed for rooms which must be kept completely free of microbiological contamination.

The partition consists of non-combustible modular panels, 60 mm thick, manufactured from time-stable materials and no emitting particles.

The partition provides smooth surfaces which are easy to clean, are airtight and offer good insulation.

Components:

  • Core: Aluminium honeycomb, link diameter 19 mm, metal strip thickness 50 µm (vertical panels). Alloy 3003 (EN 573 standard), with rustproof treatment. Density: 20 kg/m³ (50 µ). Fire reaction: Non-combustible. Resistance to compression: Average value: 270 kPa.
  • Adhesive: Bi-component polyurethane.
  • Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).
  • Polymer MS caulk.

Profiles integrated into the thickness of ST panels allow the assembly of panels and the passage of cables. The system uses an aluminium key profile that is inserted into the full-length grooves on both sides of the wall panels. A special feature without the link profile allows the partition to become removable panel by panel, due to stainless steel clips.

On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).

More about ST60:
As standard - Approvals - Further information.

PendingPARTITION:
 Manufacturer:
Dagard SAS.
  -Web:www.dagard.com/gb/.
  -Tel:+33 (0)555 824000.
  -Product reference:
ST60.
 Panel:
  -Width:
[200 mm].
[250 mm].
[350 mm].
  -Length:
[4000 mm].
[6000 mm].
 Facing:
  -Thickness:
[0.5 mm]. - Polyester 25 μm lacquer finish only.
[0.6 mm]. - Standard.
[0.8 mm]. - Polyester 25 μm lacquer and stainless steel polished S4 finishes only.
  -Material:
[Smooth stainless steel sheet, 1.4307 (304 L) grade].
[Smooth stainless steel sheet, 1.4404 (316 L) grade].
[Steel sheet S280 GD, hot-dip galvanized Z225]. - 225 g/m² of zinc on the two faces or similar.
    Coating:
[Polished S4]. - Stainless steel only.
[Polyester 25 µm lacquer]. - Class in accordance with XP P 34-301: lIIa.
[Polyester lacquer and PET film of total thickness 55 µm]. - Class in accordance with XP P 34-301: Vc.
 Colour/ Finish:
Iceberg white (similar to RAL 9010).


top ^

Guidance

for ST60

from Dagard SAS

More about ST60: As standard - Approvals - Further information.

As standard

Panel:

- Thickness:

60 mm.

- Profile:

Metallic profile for passage of cables.

Maximum acceptable loads:

Bending resistance, panels on two supports:

  • 2.5 m high: 75 q (daN/m²).
  • 3 m high: 55 q (daN/m²).
  • 3.5 m high: 42 q (daN/m²).
  • 4 m high: 30 q (daN/m²).
  • ≤5.80 m high: 20 q (daN/m²).

Technical characteristics:

  • Thermal conductivity coefficient lambda: 0.041 W/mK.
  • Thermal transmission coefficient Uc: 0.612 W/mK.
  • R-value: 1.6.
  • Weight 10.7 kg/m² (two faces, 0.5 mm thick steel); 6.9 kg/m² (two faces, 0.67 mm aluminium).
  • Tightness in the whole partition with silicone joint: Qs ≤0.0027 m³/h.m² under ΔP: 50 Pa.
  • Fire reaction: Euroclass A2-s1,d0.

Approvals

  • FM approval (standard 4880): Class 1.
  • UL approval (cable routing): Safety E471046.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Dagard SAS from ribaproductselector.com.

Contacts:

www.dagard.com/gb/

T: +33 (0)555 824000

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 13 December 2017