A-Z Manufacturers (Dagard SAS) |  CAWS Index (K13 160)
Dagard SAS

Dagard SAS

www.dagard.com/gb/

T: +33 (0)555 824000

Route du Stade, 23600 Boussac, France

This NBS Plus page covers lining partition

relating to clause 160 PROPRIETARY

in K13 Rigid sheet fine linings and panelling.

For more NBS Plus information from this company, see the Dagard SAS overview page which includes a clause list and a product list.


Products from Dagard SAS

Bookmark
ET15 - Lining partition with metallic facings.
Bookmark
SE40 - Lining partition with a metal facing and a mineral wool core.
 

View larger image of ET15 from Dagard SASET15

A lining partition designed to provide lining for any partition or existing structure in all sectors. Adaptable to the size and requirements of any site due to its flexibility.The ET15 partition consists of 15 mm thick modular panels, manufactured from an aluminium honeycomb core and bonded between two lacquered steel sheets.Components:Core: Aluminium honeycomb.Adhesive: Bi-component polyurethane.Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).Assembly: A double aluminium profile incorporated in the panel (on the edge). Can be adapted to the required project dimensions and may be screwed or plastered on the partition to be lined. The fixings are not visible.On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).Panel:Width: 1200 mm in base, sub-module: 600 mm.Thickness: 15 mm.Profile: Aluminium profile on two sides with non-visible interlocking.Weight:9 kg/m² (two faces, 0.5 mm thick).0FM approval (standard 4880)Class 1

A lining partition designed to provide lining for any partition or existing structure in all sectors. Adaptable to the size and requirements of any site due to its flexibility.

The ET15 partition consists of 15 mm thick modular panels, manufactured from an aluminium honeycomb core and bonded between two lacquered steel sheets.

Components:

  • Core: Aluminium honeycomb.
  • Adhesive: Bi-component polyurethane.
  • Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).
  • Assembly: A double aluminium profile incorporated in the panel (on the edge). Can be adapted to the required project dimensions and may be screwed or plastered on the partition to be lined. The fixings are not visible.

On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).

More about ET15:
As standard - Approvals - Further information.

PendingLINING PARTITION:
 Manufacturer:
Dagard SAS.
  -Web:www.dagard.com/gb/.
  -Tel:+33 (0)555 824000.
  -Product reference:
ET15.
 Panel length:
[ ______ ] - 4000 mm (maximum). Consult manufacturer and insert requirements.
 Facing:
  -Thickness:
[0.5 mm]. - Polyester 25 μm lacquer finish only. Standard.
[0.6 mm].
[0.8 mm]. - Polyester 25 μm lacquer and stainless steel polished S4 finishes only.
  -Material:
[Smooth stainless steel sheet, 1.4307 (304 L) grade].
[Smooth stainless steel sheet, 1.4404 (316 L) grade].
[Steel sheet S280 GD, hot-dip galvanized Z225]. - 225 g/m² of zinc on the two faces or similar.
    Coating:
[Polished S4]. - Stainless steel only.
[Polyester 25 µm lacquer]. - Class in accordance with XP P 34-301: lIIa.
[Polyester lacquer and PET film of total thickness 55 µm]. - Class in accordance with XP P 34-301: Vc.
 Colour/ Finish:
Iceberg white (similar to RAL 9010).


top ^

Guidance

for ET15

from Dagard SAS

More about ET15: As standard - Approvals - Further information.

As standard

Panel:

  • Width: 1200 mm in base, sub-module: 600 mm.
  • Thickness: 15 mm.
  • Profile: Aluminium profile on two sides with non-visible interlocking.

Weight:

9 kg/m² (two faces, 0.5 mm thick).

Approvals

  • FM approval (standard 4880): Class 1.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Dagard SAS from ribaproductselector.com.

Contacts:

www.dagard.com/gb/

T: +33 (0)555 824000

top ^

 

View larger image of SE40 from Dagard SASSE40

The lining partition is designed to provide non-combustible lining of concrete partitions, front walls, columns or other constructions.The partition consists of modular panels 40 mm thick and 1200 mm wide. An insulating mineral wool core is bonded between a smooth precoated galvanized steel sheet facing (standard thickness: 0.6 mm plus 25 µm oven-baked polyester powder coating) on the visible side, and a precoated galvanized steel sheet facing on the invisible side (other coatings are available). The partition is airtight with ultra-smooth surfaces for easy maintenance.The maximum height for a self-stable partition is 3000 mm.Components:Core: No hydrophile mineral wool. Density: 80 kg/m³. Fire class according to EN 13501-1: A1.Adhesive: Bi-component polyurethane.Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).Flexible sealant in closed cell reticulate polyethene adhesive strips, density: 50 kg/m³ (upper face of the ceiling, non-visible side).Assembly: An interlock system using an assembly key.On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).Panel:- Thickness:40 mm.- Profile:Aluminium profile on four faces. Rustproof treatment (with dichromate or electro-zinc).Maximum acceptable loads:Bending resistance, panels on two supports: 3 m high: 25 q (daN/m²).Acceptable span in ceiling:Used as a ceiling; due to their utilization and their thickness, the SE panels are not designed to be walked on. The maximum span acceptable is 2.50 m.Technical characteristics:Thermal conductivity coefficient lambda: 0.041 W/mK.Thermal transmission coefficient Uc: 0.892 W/m²K.Weight 14.4 kg/m² (two faces, 0.63 mm thick).Fire reaction: Euroclass A2-s1,d0 and Class 0.0FM approval (standard 4880)Class 1

The lining partition is designed to provide non-combustible lining of concrete partitions, front walls, columns or other constructions.

The partition consists of modular panels 40 mm thick and 1200 mm wide. An insulating mineral wool core is bonded between a smooth precoated galvanized steel sheet facing (standard thickness: 0.6 mm plus 25 µm oven-baked polyester powder coating) on the visible side, and a precoated galvanized steel sheet facing on the invisible side (other coatings are available). The partition is airtight with ultra-smooth surfaces for easy maintenance.

The maximum height for a self-stable partition is 3000 mm.

Components:

  • Core: No hydrophile mineral wool. Density: 80 kg/m³. Fire class according to EN 13501-1: A1.
  • Adhesive: Bi-component polyurethane.
  • Silicone sealant (quality-label SNJF; complies with FDA 21 CFR 175.105).
  • Flexible sealant in closed cell reticulate polyethene adhesive strips, density: 50 kg/m³ (upper face of the ceiling, non-visible side).
  • Assembly: An interlock system using an assembly key.

On request, the two facings can be manufactured from different materials on the inside and outside faces (aspect, colour and/ or thickness).

More about SE40:
As standard - Approvals - Further information.

PendingLINING PARTITION:
 Manufacturer:
Dagard SAS.
  -Web:www.dagard.com/gb/.
  -Tel:+33 (0)555 824000.
  -Product reference:
SE40.
 Panel length:
[3000 mm].
[4000 mm].
 Facing:
  -Thickness:
[0.6 mm]. - Standard.
[0.8 mm]. - Polyester 25 μm lacquer and stainless steel polished S4 finishes only.
  -Material:
[Smooth stainless steel sheet, 1.4307 (304 L) grade].
[Smooth stainless steel sheet, 1.4404 (316 L) grade].
[Steel sheet S280 GD, hot-dip galvanized Z225]. - 225 g/m² of zinc on the two faces or similar.
  -Coating:
[Polished S4]. - Stainless steel only.
[Polyester 25 µm lacquer]. - Class in accordance with XP P 34-301: lIIa.
[Polyester lacquer and PET film of total thickness 55 µm]. - Class in accordance with XP P 34-301: Vc.
 Colour/ Finish:
Iceberg white (similar to RAL 9010).


top ^

Guidance

for SE40

from Dagard SAS

More about SE40: As standard - Approvals - Further information.

As standard

Panel:

- Thickness:

40 mm.

- Profile:

Aluminium profile on four faces. Rustproof treatment (with dichromate or electro-zinc).

Maximum acceptable loads:

Bending resistance, panels on two supports: 3 m high: 25 q (daN/m²).

Acceptable span in ceiling:

Used as a ceiling; due to their utilization and their thickness, the SE panels are not designed to be walked on. The maximum span acceptable is 2.50 m.

Technical characteristics:

  • Thermal conductivity coefficient lambda: 0.041 W/mK.
  • Thermal transmission coefficient Uc: 0.892 W/m²K.
  • Weight 14.4 kg/m² (two faces, 0.63 mm thick).
  • Fire reaction: Euroclass A2-s1,d0 and Class 0.

Approvals

  • FM approval (standard 4880): Class 1.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Dagard SAS from ribaproductselector.com.

Contacts:

www.dagard.com/gb/

T: +33 (0)555 824000

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017