A-Z Manufacturers (Custom Audio Designs Ltd) |  CAWS Index (K11 275)
Custom Audio Designs Ltd

Custom Audio Designs Ltd

www.customaudiodesigns.co.uk

sales@customaudiodesigns.co.uk

T: +44 (0)1730 269572

F: +44 (0)1730 265846

5 Ridgeway Office Park, Bedford Road, Petersfield, Hampshire. GU32 3QF

RIBA Product Selector

This NBS Plus page covers foam insulation, foamed polyethylene layer, acoustic joist cap and high performance resilient tape

relating to clause 275 ACOUSTIC SEPARATING FLOOR SYSTEM

in K11 Rigid sheet flooring/ sheathing/ decking/ sarking/ linings/ casings.

For more NBS Plus information from this company, see the Custom Audio Designs Ltd overview page which includes a clause list and a product list.


Products from Custom Audio Designs Ltd

Bookmark
Acoustic Floor Resilient Impact Layer Isobase R50 - IsoBase R50 resilient layer for under timber or chipboard flooring for a reduction in impact noise and vibration.
Bookmark
Foamed Polyethylene Under-Screed Resilient Layer IsoScreed Foam - Foamed polyethylene under-screed resilient layer.
Bookmark
Acoustic Joist Cap - Acoustic joist cap.
Bookmark
Acoustic Tape High Performance RFT50 - High performance resilient tape.
 

View larger image of IsoBase R50 Under Floor Resilient Layer from Custom Audio Designs LtdAcoustic Floor Resilient Impact Layer Isobase R50

Designed to provide excellent acoustic sound insulation with ease of installation. It also supplies a degree of protection against airborne noise and improves thermal insulation.Being a closed cell foam it resists water absorption preventing fungal and bacterial growth. In addition, the foam is inert and does not rot or decay, even when exposed to high humidity and elevated temperatures.This product can also be used on top of a concrete floor if the product is bonded down.Benefits:Complies with/ exceeds Part E of new Building Regulations.Gives significant reduction in impact noise and vibration.Easy to cut and install.Low cost.Water resistant.Prevents growth of fungi, bacteria and mildew.Does not significantly raise the floor level – only 5 mm thick.Very flexible.Does not rot or decay, even when exposed to high temperatures and humidity.Lightweight.Applications:Suitable for timber floors.Reduces impact noise and vibration.Can be used in new or converted buildings.Roll size: 15 x 1 m.Thickness:5 mm.Weight:0.17 kg/m².Colour:Grey.Fire rating:60 minutes (full system).Acoustic performance:Refer to manufacturers data sheets.Density:33 kg/m³.

Designed to provide excellent acoustic sound insulation with ease of installation. It also supplies a degree of protection against airborne noise and improves thermal insulation.

Being a closed cell foam it resists water absorption preventing fungal and bacterial growth. In addition, the foam is inert and does not rot or decay, even when exposed to high humidity and elevated temperatures.

This product can also be used on top of a concrete floor if the product is bonded down.

Benefits:

  • Complies with/ exceeds Part E of new Building Regulations.
  • Gives significant reduction in impact noise and vibration.
  • Easy to cut and install.
  • Low cost.
  • Water resistant.
  • Prevents growth of fungi, bacteria and mildew.
  • Does not significantly raise the floor level – only 5 mm thick.
  • Very flexible.
  • Does not rot or decay, even when exposed to high temperatures and humidity.
  • Lightweight.

Applications:

  • Suitable for timber floors.
  • Reduces impact noise and vibration.
  • Can be used in new or converted buildings.

More about Acoustic Floor Resilient Impact Layer Isobase R50:
As standard - Further information.

PendingFOAM INSULATION:
 Manufacturer:
Custom Audio Designs Ltd.
  -Web:www.customaudiodesigns.co.uk.
  -Tel:+44 (0)1730 269572.
  -Product reference:
Acoustic Floor Resilient Impact Layer Isobase R50.


top ^

Guidance

for Acoustic Floor Resilient Impact Layer Isobase R50

from Custom Audio Designs Ltd

More about Acoustic Floor Resilient Impact Layer Isobase R50: As standard - Further information.

As standard

Roll size:

15 x 1 m.

Thickness:

5 mm.

Weight:

0.17 kg/m².

Colour:

Grey.

Fire rating:

60 minutes (full system).

Acoustic performance:

Refer to manufacturers data sheets.

Density:

33 kg/m³.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Custom Audio Designs Ltd from ribaproductselector.com.

Contacts:

www.customaudiodesigns.co.uk

sales@customaudiodesigns.co.uk

T: +44 (0)1730 269572

F: +44 (0)1730 265846

top ^

 

View larger image of IsoScreed Foam from Custom Audio Designs LtdFoamed Polyethylene Under-Screed Resilient Layer IsoScreed Foam

When used in conjunction with the appropriate floor materials it meets approved document E requirements and has the added bonus of water resistance. It can also protect the mineral wool during screed laying.It significantly reduces impact noise and vibration under a floor screed as well as providing a degree of airborne and thermal insulation. It can also be used on top of a concrete floor especially if the floor has failed an impact sound test.Benefits:Significant reduction in impact noise and vibration.Easy to cut.Lightweight.Water resistant.Prevents growth of fungi, bacteria and mildew.Does not significantly raise the floor level.Flexible.Does not rot or decay, even when exposed to high temperatures and humidity.Applications:Concrete impact reduction under screed.Timber floors.Building Regulations (E&W) Approved Document E compliant.Composition:Inert, physically cross-linked closed cell polyolefin foam sheet. Fine cell structure with two process skins.Roll size:30 x 0.925 m.Colour:Green.Weight:0.17 kg/m².Thickness:5 mm.Density:33 kg/m³.Dynamic stiffness:14 MN/m³.Fire rating (full system):60 minutes.Acoustic performance:29–71 Rw dB, refer to manufacturers' data sheets.

When used in conjunction with the appropriate floor materials it meets approved document E requirements and has the added bonus of water resistance. It can also protect the mineral wool during screed laying.

It significantly reduces impact noise and vibration under a floor screed as well as providing a degree of airborne and thermal insulation. It can also be used on top of a concrete floor especially if the floor has failed an impact sound test.

Benefits:

  • Significant reduction in impact noise and vibration.
  • Easy to cut.
  • Lightweight.
  • Water resistant.
  • Prevents growth of fungi, bacteria and mildew.
  • Does not significantly raise the floor level.
  • Flexible.
  • Does not rot or decay, even when exposed to high temperatures and humidity.

Applications:

  • Concrete impact reduction under screed.
  • Timber floors.
  • Building Regulations (E&W) Approved Document E compliant.

More about Foamed Polyethylene Under-Screed Resilient Layer IsoScreed Foam:
As standard - Further information.

PendingFOAMED POLYETHYLENE LAYER:
 Manufacturer:
Custom Audio Designs Ltd.
  -Web:www.customaudiodesigns.co.uk.
  -Tel:+44 (0)1730 269572.
  -Product reference:
Foamed Polyethylene Under-Screed Resilient Layer IsoScreed Foam.


top ^

Guidance

for Foamed Polyethylene Under-Screed Resilient Layer IsoScreed Foam

from Custom Audio Designs Ltd

More about Foamed Polyethylene Under-Screed Resilient Layer IsoScreed Foam: As standard - Further information.

As standard

Composition:

Inert, physically cross-linked closed cell polyolefin foam sheet. Fine cell structure with two process skins.

Roll size:

30 x 0.925 m.

Colour:

Green.

Weight:

0.17 kg/m².

Thickness:

5 mm.

Density:

33 kg/m³.

Dynamic stiffness:

14 MN/m³.

Fire rating (full system):

60 minutes.

Acoustic performance:

29–71 Rw dB, refer to manufacturers' data sheets.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Custom Audio Designs Ltd from ribaproductselector.com.

Contacts:

www.customaudiodesigns.co.uk

sales@customaudiodesigns.co.uk

T: +44 (0)1730 269572

F: +44 (0)1730 265846

top ^

 

View larger image of Acoustic Joist Cap from Custom Audio Designs LtdAcoustic Joist Cap

Easy to fit, direct-to-joist system, engineered as a Building Regulations (E&W) Approved Document E compliant acoustic joist treatment. The jaw of the caps are slightly tapered to ensure a tight friction fit.When used upside down, it can also provide the resilient layer required when making resilient battens.It can be used in both new build and refurbishment projects for timber and masonry builds. Used to achieve good sound attenuation, the mass of the structure is placed above the resilient layer. It is then placed over the joists before the mass of the floor is added. The cap is suitable for both rough-cut and planed timber joists. Benefits:No wastage.No structural change over time.Lightweight.CFC and HCFC-free.Zero Ozone Depletion Potential (ODP).Very low toxic fume and smoke emissions.Moisture resistant.Rot-proof.Applications:Timber and masonry builds.Direct to joist application.Non-specialist installation.Size (l x w):2000 x 50 mm.Thickness:12 mm.Density:30 kg/m³.Acoustic performance:Varies depending on application, refer to manufacturers data sheets.Accessories:Flanking strip must be used to fully isolate the floating floor from the structure.

Easy to fit, direct-to-joist system, engineered as a Building Regulations (E&W) Approved Document E compliant acoustic joist treatment. The jaw of the caps are slightly tapered to ensure a tight friction fit.

When used upside down, it can also provide the resilient layer required when making resilient battens.

It can be used in both new build and refurbishment projects for timber and masonry builds. Used to achieve good sound attenuation, the mass of the structure is placed above the resilient layer. It is then placed over the joists before the mass of the floor is added. The cap is suitable for both rough-cut and planed timber joists.

Benefits:

  • No wastage.
  • No structural change over time.
  • Lightweight.
  • CFC and HCFC-free.
  • Zero Ozone Depletion Potential (ODP).
  • Very low toxic fume and smoke emissions.
  • Moisture resistant.
  • Rot-proof.

Applications:

  • Timber and masonry builds.
  • Direct to joist application.
  • Non-specialist installation.

More about Acoustic Joist Cap:
As standard - Options - Further information.

PendingACOUSTIC JOIST CAP:
 Manufacturer:
Custom Audio Designs Ltd.
  -Web:www.customaudiodesigns.co.uk.
  -Tel:+44 (0)1730 269572.
  -Product reference:
Acoustic Joist Cap.
 Accessories:
[None].
[L-profile flanking strip].


top ^

Guidance

for Acoustic Joist Cap

from Custom Audio Designs Ltd

More about Acoustic Joist Cap: As standard - Options - Further information.

As standard

Size (l x w):

2000 x 50 mm.

Thickness:

12 mm.

Density:

30 kg/m³.

Acoustic performance:

Varies depending on application, refer to manufacturers data sheets.

Options

Accessories:

Flanking strip must be used to fully isolate the floating floor from the structure.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Custom Audio Designs Ltd from ribaproductselector.com.

Contacts:

www.customaudiodesigns.co.uk

sales@customaudiodesigns.co.uk

T: +44 (0)1730 269572

F: +44 (0)1730 265846

top ^

 

View larger image of RFT50 High Performance Resilient Tape from Custom Audio Designs LtdAcoustic Tape High Performance RFT50

NE360RT RFT50 Resilient Tape is an acoustic isolation strip used for reducing sound transfer by isolating partitioning or party walls in all forms of construction where there is any point of contact.Manufactured from an open cell natural rubber with excellent loading and recovery properties, it is mainly used as a superior material for fixing to joist tops before floating tongue and grooved floorboards or particleboard. It is also ideal for installation at the bottom of wooden battens/ joists for DIY-resilient batten applications.A predominantly polyester weave adds strength to the polymer base and is a stronger, tougher, durable material. The micro-fibre mesh offers an excellent surface for the application of adhesive. Features and benefits:CFC and HFC-free.Recyclable.Applications:Stud work isolation.Batten and joist isolation.New build and refurbishment.Technical characteristics:Colour: Black.Polymer: Natural rubber with micro-fibre surface.Compression deflection: – at 25%: Medium, 5–10 PSI.Compression set (50% deflection at 70˚C): 15% (maximum).Temperature range: -40˚C to +80˚C.Density (average): 390 kg/m³ ±10%Tensile strength: 280 kPa.Elongation 250%.

NE360RT RFT50 Resilient Tape is an acoustic isolation strip used for reducing sound transfer by isolating partitioning or party walls in all forms of construction where there is any point of contact.

Manufactured from an open cell natural rubber with excellent loading and recovery properties, it is mainly used as a superior material for fixing to joist tops before floating tongue and grooved floorboards or particleboard. It is also ideal for installation at the bottom of wooden battens/ joists for DIY-resilient batten applications.

A predominantly polyester weave adds strength to the polymer base and is a stronger, tougher, durable material. The micro-fibre mesh offers an excellent surface for the application of adhesive.

Features and benefits:

  • CFC and HFC-free.
  • Recyclable.

Applications:

  • Stud work isolation.
  • Batten and joist isolation.
  • New build and refurbishment.

More about Acoustic Tape High Performance RFT50:
As standard - Further information.

PendingHIGH PERFORMANCE RESILIENT TAPE:
 Manufacturer:
Custom Audio Designs Ltd.
  -Web:www.customaudiodesigns.co.uk.
  -Tel:+44 (0)1730 269572.
  -Product reference:
Acoustic Tape High Performance RFT50.


top ^

Guidance

for Acoustic Tape High Performance RFT50

from Custom Audio Designs Ltd

More about Acoustic Tape High Performance RFT50: As standard - Further information.

As standard

Technical characteristics:

  • Colour: Black.
  • Polymer: Natural rubber with micro-fibre surface.
  • Compression deflection: – at 25%: Medium, 5–10 PSI.
  • Compression set (50% deflection at 70˚C): 15% (maximum).
  • Temperature range: -40˚C to +80˚C.
  • Density (average): 390 kg/m³ ±10%
  • Tensile strength: 280 kPa.
  • Elongation 250%.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Custom Audio Designs Ltd from ribaproductselector.com.

Contacts:

www.customaudiodesigns.co.uk

sales@customaudiodesigns.co.uk

T: +44 (0)1730 269572

F: +44 (0)1730 265846

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 18 December 2017