A-Z Manufacturers (Bolton Gate Co Ltd) |  CAWS Index (L20 60)
Bolton Gate Co Ltd

Bolton Gate Co Ltd

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

Waterloo Street, Bolton, Lancashire. BL1 2SP

RIBA Product Selector

This NBS Plus page covers collapsible gates, folding doors, folding shutter doors and roller shutters

relating to clause 60 DOORS

in L20 Doors/ shutters/ hatches.

For more NBS Plus information from this company, see the Bolton Gate Co Ltd overview page which includes a clause list and a product list.


Products from Bolton Gate Co Ltd

Bolton Gate Company can provide a design and specification advisory service, consultation early in the design stage is recommended.

Select to expand
Collapsible Gates Range: (1)
Select to expand
Folding Doors Range: (4)
Select to expand
Folding Shutter Doors Range: (2)
Select to expand
Roller Shutters Range: (8)
 

View larger image of Collapsible Gates from Bolton Gate Co LtdCollapsible Gates

A range of custom-made collapsible gates designed for underground stations, car parks, and in a wide range of commercial situations.The gates can be top hung or bottom rolling with the optional facility to be hinged aside for locations on shop entrances, window protection and small openings where a clear width is required. Ram-raid protection is provided when both top and bottom tracks are fitted.Gate Types:Top hung gates:A top hung gate should be used wherever possible due to its superior operating capabilities. Single gates up to 2500 mm high and/ or 3000 mm wide are suspended from a flat bar top track, fixed at each end; larger gates have a box type top track. The gates incorporate channel bottom tracks set into the floor.Bottom rolling gates:They run on a flat bar bottom track which can be folding or portable for smaller openings. Where the gate is required to hinge aside when bunched, a ‘Tee’ section top track is used. The weight of the gate is supported by pulleys at the base of the pickets. Spearhead gates:Generally as bottom rolling gates with pointed spearheads attached to the top of the pickets to offer climb-over protection where lintels are not available for head fixings. Pairs of gates are supplied with removable centre post and fixing stay.Additional requirements: Floating gates - top hung only.Hook lock bolt.Mid bar gates for reduced centres.Parallel bunch - for limited bunch situations.Plated leading edge.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL333187.pdf&pg=

A range of custom-made collapsible gates designed for underground stations, car parks, and in a wide range of commercial situations.

The gates can be top hung or bottom rolling with the optional facility to be hinged aside for locations on shop entrances, window protection and small openings where a clear width is required. Ram-raid protection is provided when both top and bottom tracks are fitted.

Gate Types:

Top hung gates:

A top hung gate should be used wherever possible due to its superior operating capabilities. Single gates up to 2500 mm high and/ or 3000 mm wide are suspended from a flat bar top track, fixed at each end; larger gates have a box type top track. The gates incorporate channel bottom tracks set into the floor.

Bottom rolling gates:

They run on a flat bar bottom track which can be folding or portable for smaller openings. Where the gate is required to hinge aside when bunched, a ‘Tee’ section top track is used. The weight of the gate is supported by pulleys at the base of the pickets.

Spearhead gates:

Generally as bottom rolling gates with pointed spearheads attached to the top of the pickets to offer climb-over protection where lintels are not available for head fixings. Pairs of gates are supplied with removable centre post and fixing stay.

More about Collapsible Gates:
- Options - Further information.

PendingCOLLAPSIBLE GATES:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Collapsible Gates.
 Type:
[Bottom rolling].
[Spearhead gates].
[Top hung].
 Size:
[1500 x 2000 mm]. - Bottom hung or spearhead (single).
[3000 x 2000 mm]. - Bottom hung or spearhead (pair).
[4000 x 4000 mm]. - Top hung (single).
 Arrangement:
[Bi-parting bunching].
[Single bunching - Left hand side].
[Single bunching - Right hand side].
 Finish:
[Galvanized].
[Polyester powder coated].
 Additional requirements:
[Floating gates - top hung only].
[Hook lock bolt].
[Mid bar gates for reduced centres].


top ^

Guidance

for Collapsible Gates

from Bolton Gate Co Ltd

More about Collapsible Gates: - Options - Further information.

Options

Additional requirements:

  • Floating gates - top hung only.
  • Hook lock bolt.
  • Mid bar gates for reduced centres.
  • Parallel bunch - for limited bunch situations.
  • Plated leading edge.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Sonafold Top Hung Acoustic Folding Doors from Bolton Gate Co LtdSonafold Top Hung Acoustic Folding Doors

For internal or external openings where a reduction in noise transmission is required. Panels:Constructed from rolled steel hollow sections with 2 mm thick flat galvanized steel facing sheets on both sides. The panels are infilled with a high-density insulation material and have an overall thickness of 64 mm.Tracks:The door panels are top-hung on 4 wheel bearing hangers which incorporate the panel hinges and run in a galvanized top track. An auxiliary top track is attached to allow the panels to fold correctly. Brass rollers connected to the bottom hinges run in a steel channel bottom track, which is set for alignment within a 200 x 100 mm chase before final grouting in position.Track system: Standard top and bottom tracks.Door leaf: Insulated flat steel panels.Weight: Approximately 45 kg/m².Acoustic properties: When tested, the door achieved a weighted sound reduction index (Rw) of 28 dB.Thermal insulation: The door panels provide a ‘U-value’ of 0.47 W/m²°C.Colour: A range of colours is available. Operation:415V, 3 phase motor. Optional items:Cut-outs for runway beams.Door controls.Double-glazed vision panels.Safety photocells.Wicket doors with cylinder lock.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL23154.pdf&pg=

For internal or external openings where a reduction in noise transmission is required.

Panels:

Constructed from rolled steel hollow sections with 2 mm thick flat galvanized steel facing sheets on both sides. The panels are infilled with a high-density insulation material and have an overall thickness of 64 mm.

Tracks:

The door panels are top-hung on 4 wheel bearing hangers which incorporate the panel hinges and run in a galvanized top track. An auxiliary top track is attached to allow the panels to fold correctly. Brass rollers connected to the bottom hinges run in a steel channel bottom track, which is set for alignment within a 200 x 100 mm chase before final grouting in position.

More about Sonafold Top Hung Acoustic Folding Doors:
As standard - Options - Further information.

PendingFOLDING DOORS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Sonafold Top Hung Acoustic Folding Doors.
 Size:
[12 x 8 m (Single doors)].
[24 x 8 m (Pairs of doors)].
 Arrangement:
[Top hung, single door, bunching to left side].
[Top hung, single door, bunching to right side].
 Finish:
[Polyester powder coated].
[Standard galvanized finish].
 Colour:
[ ______ ]
 Optional items:
[Cut-outs for runway beams].
[Door controls].
[Double-glazed vision panels].


top ^

Guidance

for Sonafold Top Hung Acoustic Folding Doors

from Bolton Gate Co Ltd

More about Sonafold Top Hung Acoustic Folding Doors: As standard - Options - Further information.

As standard

Track system:

Standard top and bottom tracks.

Door leaf:

Insulated flat steel panels.

Weight:

Approximately 45 kg/m².

Acoustic properties:

When tested, the door achieved a weighted sound reduction index (Rw) of 28 dB.

Thermal insulation:

The door panels provide a ‘U-value’ of 0.47 W/m²°C.

Options

Colour:

A range of colours is available.

Operation:

415V, 3 phase motor.

Optional items:

  • Cut-outs for runway beams.
  • Door controls.
  • Double-glazed vision panels.
  • Safety photocells.
  • Wicket doors with cylinder lock.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Superfold 4000/ 5000 Top Hung High Security Insulated Folding Doors from Bolton Gate Co LtdSuperfold 4000/ 5000 Top Hung High Security Insulated Folding Doors

The Superfold 4000 doorset will survive an experienced attempt at a forced entry using portable tools whilst the Superfold 5000 doorset will survive professional attempts at forced entry with a combination of mechanical and mains powered tools as specified in the standard.Door panels:Constructed from internal steel channel sections forming a strong inner framework with 3 mm flat galvanized steel facing sheets fixed to both sides. The panels are infilled with a high-density insulation and reinforcing material and have an overall thickness of 56 mm. Each panel is fitted with high quality EPDM sections forming a tight weather seal between panels and around the perimeter of the door.Hinges/ guide pins:The panels are joined together with continuous stainless steel hinges with concealed fixings into the reinforced edges of the panels and the bottom hinges incorporate plated rollers to run in the bottom track.Tracks:The door panels are hung on 4 wheel bearing hangers which incorporate the panel hinges and run in a galvanized top track. An auxiliary top track is attached to allow the panels to fold correctly.A steel channel bottom track is provided and set for alignment with a 210 x 75 mm chase before final grouting into position. The profile of the bottom track both assists weathersealing whilst providing the necessary level threshold thus allowing the bottom gap to be maintained within the tested dimension. A sump box for drainage and dirt clearance purposes is provided as standard.Door arrangements:The doors are face fixed to the inside of the steelwork opening and are always supplied as a single door (bunching to one side). The door can be left or right-handed.Weight: Approximately 90 kg/m².Colour: A range of colours is available. Operation:415V, 3 phase motor. Optional items:A variety of controls.Door panel upgrade to achieve a G2 ballistic rating.Safety photocells.Status indication.Traffic lights.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL231070.pdf&pg=0Loss Prevention CouncilCertificate: LP1175Grades 4 and 5.Specification for testing and classifying the burglary resistance of building components, strongpoints and security

The Superfold 4000 doorset will survive an experienced attempt at a forced entry using portable tools whilst the Superfold 5000 doorset will survive professional attempts at forced entry with a combination of mechanical and mains powered tools as specified in the standard.

Door panels:

Constructed from internal steel channel sections forming a strong inner framework with 3 mm flat galvanized steel facing sheets fixed to both sides. The panels are infilled with a high-density insulation and reinforcing material and have an overall thickness of 56 mm. Each panel is fitted with high quality EPDM sections forming a tight weather seal between panels and around the perimeter of the door.

Hinges/ guide pins:

The panels are joined together with continuous stainless steel hinges with concealed fixings into the reinforced edges of the panels and the bottom hinges incorporate plated rollers to run in the bottom track.

Tracks:

The door panels are hung on 4 wheel bearing hangers which incorporate the panel hinges and run in a galvanized top track. An auxiliary top track is attached to allow the panels to fold correctly.

A steel channel bottom track is provided and set for alignment with a 210 x 75 mm chase before final grouting into position. The profile of the bottom track both assists weathersealing whilst providing the necessary level threshold thus allowing the bottom gap to be maintained within the tested dimension. A sump box for drainage and dirt clearance purposes is provided as standard.

Door arrangements:

The doors are face fixed to the inside of the steelwork opening and are always supplied as a single door (bunching to one side). The door can be left or right-handed.

More about Superfold 4000/ 5000 Top Hung High Security Insulated Folding Doors:
As standard - Options - Approvals - Further information.

PendingFOLDING DOORS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
[Superfold 4000 Top Hung High Security Insulated Folding Doors].
[Superfold 5000 Top Hung High Security Insulated Folding Doors].
 Size:
8 x 4 m.
 Arrangement:
[Top hung, single door, bunching to one side: left side].
[Top hung, single door, bunching to one side: right side].
 Finish:
[Polyester powder coated].
[Standard galvanized finish].
 Colour:
[Natural].
[ ______ ]
 Optional items:
[Door panel upgrade to achieve a G2 ballistic rating].
[A variety of controls].
[Safety photocells].


top ^

Guidance

for Superfold 4000/ 5000 Top Hung High Security Insulated Folding Doors

from Bolton Gate Co Ltd

More about Superfold 4000/ 5000 Top Hung High Security Insulated Folding Doors: As standard - Options - Approvals - Further information.

As standard

Weight:

Approximately 90 kg/m².

Options

Colour:

A range of colours is available.

Operation:

415V, 3 phase motor.

Optional items:

  • A variety of controls.
  • Door panel upgrade to achieve a G2 ballistic rating.
  • Safety photocells.
  • Status indication.
  • Traffic lights.

Approvals

  • Loss Prevention Council: Certificate: LP1175 -Grades 4 and 5., Specification for testing and classifying the burglary resistance of building components, strongpoints and security.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Thermafold 1000 Side Hung Insulated Folding Doors from Bolton Gate Co LtdThermafold 1000 Side Hung Insulated Folding Doors

Designed for applications where a bottom track needs to be avoided such as railway depots. Its ease of operation allows the doors to be manually operated.Door panels:Constructed from galvanized steel, infilled with a high-density insulation material. The panels are typically 40 mm to 65 mm in thickness.Tracks:The compact top track keeps headroom to a minimum and the door is supported on floor barings, obviating the need for a bottom track.Door arrangements:The standard arrangement comprises a pair of panels each side, but the door is also available as a single or in 1+2 configuration.Weight: Approximately 45 kg/m².Thermal transmission: The door panels provide a U-value of 0.47 W/m²°C.Operation:The standard version is manually operated with electric operation an optional extra. Optional items:Cut-outs for runway beams.Double-glazed vision panels - partially/ fully glazed.Ventilation louvres.Low-level motor disconnection for emergency manual operation. Wicket doors.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL139178.pdf&pg=

Designed for applications where a bottom track needs to be avoided such as railway depots. Its ease of operation allows the doors to be manually operated.

Door panels:

Constructed from galvanized steel, infilled with a high-density insulation material. The panels are typically 40 mm to 65 mm in thickness.

Tracks:

The compact top track keeps headroom to a minimum and the door is supported on floor barings, obviating the need for a bottom track.

Door arrangements:

The standard arrangement comprises a pair of panels each side, but the door is also available as a single or in 1+2 configuration.

More about Thermafold 1000 Side Hung Insulated Folding Doors:
As standard - Options - Further information.

PendingFOLDING DOORS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Thermafold 1000.
 Size:
[3 x 6 m (Single)].
[4.5 x 6 m (1+2 arrangement)].
[6 x 6 m (Pairs of doors)].
 Finish:
[HP200 Colorcoat Plasticol].
[Polyester powder coated].
[Standard galvanized finish].
 Optional items:
[Cut-outs for runway beams].
[Double-glazed vision panels, fully glazed].
[Double-glazed vision panels, partially glazed].


top ^

Guidance

for Thermafold 1000 Side Hung Insulated Folding Doors

from Bolton Gate Co Ltd

More about Thermafold 1000 Side Hung Insulated Folding Doors: As standard - Options - Further information.

As standard

Weight:

Approximately 45 kg/m².

Thermal transmission:

The door panels provide a U-value of 0.47 W/m²°C.

Options

Operation:

The standard version is manually operated with electric operation an optional extra.

Optional items:

  • Cut-outs for runway beams.
  • Double-glazed vision panels - partially/ fully glazed.
  • Ventilation louvres.
  • Low-level motor disconnection for emergency manual operation.
  • Wicket doors.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Thermafold 2000 Top Hung Insulated Folding Doors from Bolton Gate Co LtdThermafold 2000 Top Hung Insulated Folding Doors

For larger openings or exposed locations where its robust construction makes it particularly tolerant of high wind conditions. Flush face design with energy saving benefits of an insulated construction.Door panels:Constructed from hollow steel sections with 1.5 mm thick flat galvanized steel facing sheets on both sides. The panels are infilled with a high-density insulation material and have an overall thickness of 63 mm.Tracks:The door panels are top-hung on 4 wheel trolley bearing hangers which incorporate the panel hinges and run in a galvanized steel top track. An auxiliary top track is attached to allow the panels to fold correctly. Brass rollers connected to the bottom hinges run in a steel channel bottom track, which is set for alignment within a 200 x 100 mm chase before final grouting into position.Door arrangements:The doors are normally face fixed to the inside of the opening but can be arranged to mount directly between jambs. They can be supplied as a single door (bunching to one side) or bi-parting.Weight: Approximately 45 kg/m².Thermal transmission: The door panels provide a U-value of 0.47 W/m²°C.Operation: 415V, 3 phase motor.Optional items:A variety of controls.Cut-outs for runway beams.Double-glazed vision panels.Safety photocells.Single phase electric operation.Wicket doors with cylinder lock.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL139178.pdf&pg=

For larger openings or exposed locations where its robust construction makes it particularly tolerant of high wind conditions. Flush face design with energy saving benefits of an insulated construction.

Door panels:

Constructed from hollow steel sections with 1.5 mm thick flat galvanized steel facing sheets on both sides. The panels are infilled with a high-density insulation material and have an overall thickness of 63 mm.

Tracks:

The door panels are top-hung on 4 wheel trolley bearing hangers which incorporate the panel hinges and run in a galvanized steel top track. An auxiliary top track is attached to allow the panels to fold correctly. Brass rollers connected to the bottom hinges run in a steel channel bottom track, which is set for alignment within a 200 x 100 mm chase before final grouting into position.

Door arrangements:

The doors are normally face fixed to the inside of the opening but can be arranged to mount directly between jambs. They can be supplied as a single door (bunching to one side) or bi-parting.

More about Thermafold 2000 Top Hung Insulated Folding Doors:
As standard - Options - Further information.

PendingFOLDING DOORS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Thermafold 2000 Top Hung Insulated Folding Doors.
 Size:
[12 x 8 m (Single)].
[24 x 8 m (Double)].
 Finish:
[HP200 Colorcoat Plasticol].
[Polyester powder coated].
[Standard galvanized finish].
 Optional items:
[Cut-outs for runway beams].
[Double-glazed vision panels].
[Safety photocells].


top ^

Guidance

for Thermafold 2000 Top Hung Insulated Folding Doors

from Bolton Gate Co Ltd

More about Thermafold 2000 Top Hung Insulated Folding Doors: As standard - Options - Further information.

As standard

Weight:

Approximately 45 kg/m².

Thermal transmission:

The door panels provide a U-value of 0.47 W/m²°C.

Operation:

415V, 3 phase motor.

Options

Optional items:

  • A variety of controls.
  • Cut-outs for runway beams.
  • Double-glazed vision panels.
  • Safety photocells.
  • Single phase electric operation.
  • Wicket doors with cylinder lock.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Eurofold Folding Shutter Doors from Bolton Gate Co LtdEurofold Folding Shutter Doors

Available in single or in pairs, manual or electrically operated and designed for internal and external commercial applications. They are capable of withstanding vehicle collision, ram-raid attacks and severe wind conditions. Gate frame:Formed from galvanized steel double channel vertical pickets, 1.2 mm thick, interconnected by 2 mm thick galvanized cold formed lattice bars. The gate frame is top hung from a ball bearing pulley connected to the picket by zinc plated pulley brackets. At the bottom, the frame is fitted with zinc plated bottom guide pieces designed to run in a bottom track.Leading edge: The high security leading edge strengthens the shutter further and is manufactured from a galvanized steel section which incorporates pull handles. A draught excluding overlapping section is provided. Shutter leaves: 305 mm wide x 1.2 mm thick full height galvanized steel, with 3 mm diameter strengthening wires and securely capped galvanized steel hinge strips, to provide a continuously interlocking, weather-tight elevation.Top track:The standard top track is constructed from 2 galvanized steel sections, 90 mm deep.Bottom track:The bottom guide pieces are retained within a 3 mm thick galvanized steel ‘M’ shaped bottom track, chased into the floor. Chase: 150 mm wide x 75 mm deep.Cover plate:A galvanized steel weather cover panel is provided over the top of the shutter leaves which is bolted to the top track and supported by straps to give security and weather protection.End panels:For doors fixed behind and bunching clear of the opening, a galvanized steel draught resistant closer is provided. For increased security, single doors close onto a 25 mm x 26 mm galvanized steel slam channel fixed full height to the opening structure.Weight: Approximately 32 kg/m².Speed of operation for electric doors: 200 mm/second/door leaf.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL502184.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL519197.pdf&pg=

Available in single or in pairs, manual or electrically operated and designed for internal and external commercial applications. They are capable of withstanding vehicle collision, ram-raid attacks and severe wind conditions.

Gate frame:

Formed from galvanized steel double channel vertical pickets, 1.2 mm thick, interconnected by 2 mm thick galvanized cold formed lattice bars. The gate frame is top hung from a ball bearing pulley connected to the picket by zinc plated pulley brackets. At the bottom, the frame is fitted with zinc plated bottom guide pieces designed to run in a bottom track.

Leading edge:

The high security leading edge strengthens the shutter further and is manufactured from a galvanized steel section which incorporates pull handles. A draught excluding overlapping section is provided.

Shutter leaves:

305 mm wide x 1.2 mm thick full height galvanized steel, with 3 mm diameter strengthening wires and securely capped galvanized steel hinge strips, to provide a continuously interlocking, weather-tight elevation.

Top track:

The standard top track is constructed from 2 galvanized steel sections, 90 mm deep.

Bottom track:

The bottom guide pieces are retained within a 3 mm thick galvanized steel ‘M’ shaped bottom track, chased into the floor. Chase: 150 mm wide x 75 mm deep.

Cover plate:

A galvanized steel weather cover panel is provided over the top of the shutter leaves which is bolted to the top track and supported by straps to give security and weather protection.

End panels:

For doors fixed behind and bunching clear of the opening, a galvanized steel draught resistant closer is provided. For increased security, single doors close onto a 25 mm x 26 mm galvanized steel slam channel fixed full height to the opening structure.

More about Eurofold Folding Shutter Doors:
As standard - Further information.

PendingFOLDING SHUTTER DOORS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Eurofold.
 Size:
[10 x 7 m]. - Single doors.
[20 x 7 m]. - Pairs of doors.
 Arrangement:
[Bi-parting bunching].
[Single bunching, left hand side].
[Single bunching, right hand side].
 Operation:
[Manual].
[415V, 3 phase, 50 Hz electric motor].
 Finish:
[Polyester powder coated].
[Standard galvanized finish, Primer painted to non-galvanized components].


top ^

Guidance

for Eurofold Folding Shutter Doors

from Bolton Gate Co Ltd

More about Eurofold Folding Shutter Doors: As standard - Further information.

As standard

Weight:

Approximately 32 kg/m².

Speed of operation for electric doors:

200 mm/second/door leaf.

Further Information

Literature:



RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Superior Folding Shutter Doors from Bolton Gate Co LtdSuperior Folding Shutter Doors

An electrically operated folding shutter designed for both heavily used and very large doorways for applications ranging from rapid acting fire and ambulance station doors to shipyards and aircraft hangers. Gate frame:25 mm channel pickets interconnected by 30 x 10 mm solid steel lattice bars. The gate frame is top hung from free running ball bearing pulleys connected to the pickets with zinc plated bottom guide pieces fitted at the base to run in the bottom track.Leading edge:The high security leading edge is fabricated from steel plate and channels into a rigid box section into which is recessed the chain disconnect mechanism. A safety edge is fitted to stop the door should it meet an obstruction.Shutter leaves:305 mm wide x 1.2 mm or 1.5 mm thick galvanized steel, with 3 mm diameter strengthening wires and securely capped galvanized steel hinge strips, to provide a continuously interlocking, weather-tight elevation.Top track:229 mm deep incorporating 2 round edge runner rails ensuring smooth running of the pulleys. The motor gearbox, tensioner and adjustable limits are surface mounted for ease of access whilst the drive chain is totally enclosed to provide direct in-line transmission.Bottom track:Type B24, fabricated from double 51 x 25 mm steel channels chased into the floor. Chase: 250 mm wide x 100 mm deep.Cover plate:A galvanized steel cover plate is bolted to the top track to act as a cover over the shutter leaves. End panels:Galvanized steel end panels can be provided to act as a vertical closure when the doors fit behind the opening.Weight: Approximately 50 kg/m².Speed of operation for electric doors: 350 mm/second/door leaf, based on normal sized doors.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL956790.pdf&pg=

An electrically operated folding shutter designed for both heavily used and very large doorways for applications ranging from rapid acting fire and ambulance station doors to shipyards and aircraft hangers.

Gate frame:

25 mm channel pickets interconnected by 30 x 10 mm solid steel lattice bars. The gate frame is top hung from free running ball bearing pulleys connected to the pickets with zinc plated bottom guide pieces fitted at the base to run in the bottom track.

Leading edge:

The high security leading edge is fabricated from steel plate and channels into a rigid box section into which is recessed the chain disconnect mechanism. A safety edge is fitted to stop the door should it meet an obstruction.

Shutter leaves:

305 mm wide x 1.2 mm or 1.5 mm thick galvanized steel, with 3 mm diameter strengthening wires and securely capped galvanized steel hinge strips, to provide a continuously interlocking, weather-tight elevation.

Top track:

229 mm deep incorporating 2 round edge runner rails ensuring smooth running of the pulleys. The motor gearbox, tensioner and adjustable limits are surface mounted for ease of access whilst the drive chain is totally enclosed to provide direct in-line transmission.

Bottom track:

Type B24, fabricated from double 51 x 25 mm steel channels chased into the floor. Chase: 250 mm wide x 100 mm deep.

Cover plate:

A galvanized steel cover plate is bolted to the top track to act as a cover over the shutter leaves.

End panels:

Galvanized steel end panels can be provided to act as a vertical closure when the doors fit behind the opening.

More about Superior Folding Shutter Doors:
As standard - Further information.

PendingFOLDING SHUTTER DOORS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Superior Folding Shutter Doors.
 Size:
[20 x 15 m (Single doors)].
[40 x 15 m (Pairs of doors)].
 Arrangement:
[Bi-parting bunching].
[Single bunching to left hand side].
[Single bunching to right hand side].
 Manual:
[Manual].
[415V, 3 phase, 50 Hz electric motor].
 Finish:
[Polyester powder coated].
[Standard galvanized finish, Primer painted to non-galvanized components].


top ^

Guidance

for Superior Folding Shutter Doors

from Bolton Gate Co Ltd

More about Superior Folding Shutter Doors: As standard - Further information.

As standard

Weight:

Approximately 50 kg/m².

Speed of operation for electric doors:

350 mm/second/door leaf, based on normal sized doors.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Contour 2000 Laterally Operated Fire Resisting Rolling Shutter from Bolton Gate Co LtdContour 2000 Laterally Operated Fire Resisting Rolling Shutter

An electrically operated lateral rolling shutter designed to negotiate bends, curves, ovals and circles, without the need for piers, in large open-plan areas and atrium constructions.Shutter curtain:Constructed from curved section, interlocking galvanized laths. The leading edge of the single shutter is led into a bell mouth receiving channel at the closing jamb, whilst the leading edges of a pair of shutters are provided in male and female sections to effect an overlapping seal.Suspension: The shutter laths are suspended from a narrow 200 mm deep fabricated top track by means of ball bearing pulleys. The top and bottom of the curtain is attached to a heavy duty drive chain which provides the flexibility to follow contoured tracking arrangements. The top track can be fixed directly to the soffit slab or a structural downstand or can be supported from hanger brackets, permitting building services to pass through the void (note, the void will require fire stopping to comply with the Building Regulations).Shutter box:The shutter curtain is mounted onto a patented, constant tension barrel assembled in a self-contained vertical fire resistant housing. A removable panel to one side of the housing permits access for maintenance.Shutter box sizes: 750 x 1300 mm for 10 m curtain length up to 1500 x 2200 mm for 50 m curtain length.Weight: Shutter box: 450 kg/linear metre.Curtain: 24 kg/m².Track: 30 kg/metre run.Shutter closing speed: AC:12 m/minute.DC: 9 m/minute.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL455476.pdf&pg=0LPC approved

An electrically operated lateral rolling shutter designed to negotiate bends, curves, ovals and circles, without the need for piers, in large open-plan areas and atrium constructions.

Shutter curtain:

Constructed from curved section, interlocking galvanized laths. The leading edge of the single shutter is led into a bell mouth receiving channel at the closing jamb, whilst the leading edges of a pair of shutters are provided in male and female sections to effect an overlapping seal.

Suspension:

The shutter laths are suspended from a narrow 200 mm deep fabricated top track by means of ball bearing pulleys. The top and bottom of the curtain is attached to a heavy duty drive chain which provides the flexibility to follow contoured tracking arrangements. The top track can be fixed directly to the soffit slab or a structural downstand or can be supported from hanger brackets, permitting building services to pass through the void (note, the void will require fire stopping to comply with the Building Regulations).

Shutter box:

The shutter curtain is mounted onto a patented, constant tension barrel assembled in a self-contained vertical fire resistant housing. A removable panel to one side of the housing permits access for maintenance.

More about Contour 2000 Laterally Operated Fire Resisting Rolling Shutter:
As standard - Approvals - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Contour 2000 .
 Size:
[30 m x 4.5 m for single unit]. - General assessment.
[60 x 4.5 m for pair of units]. - General assessment.
[50 x 6 m for single unit]. - Individual assessment.
 Operation:
[24V DC with 240V, 50 Hz charger unit].
[415V AC, 3 phase, 50 Hz electric motor].
 Finish:
[Polyester powder coated].
[Standard galvanized finish to shutter curtains. Primer painted to non-galvanized components].


top ^

Guidance

for Contour 2000 Laterally Operated Fire Resisting Rolling Shutter

from Bolton Gate Co Ltd

More about Contour 2000 Laterally Operated Fire Resisting Rolling Shutter: As standard - Approvals - Further information.

As standard

Shutter box sizes:

750 x 1300 mm for 10 m curtain length up to 1500 x 2200 mm for 50 m curtain length.

Weight:

  • Shutter box: 450 kg/linear metre.
  • Curtain: 24 kg/m².
  • Track: 30 kg/metre run.

Shutter closing speed:

  • AC:12 m/minute.
  • DC: 9 m/minute.

Approvals

  • LPC approved .

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Escalator Fire Resistant Roller Shutters from Bolton Gate Co LtdEscalator Fire Resistant Roller Shutters

An electrically operated horizontal shutter designed to provide fire compartmentation between floors of shops, or stores where escalators, travelators or stairwells are present. Available in various configurations, the design parameters are versatile allowing the shutter to be incorporated within light wells or plant rooms as special tank covers. Variable escalator rake angles can be accommodated and fully horizontal arrangements are available. Each unit is factory tested and pre-assembled. Curtain:Constructed from curved section galvanized steel laths with malleable iron endlocks. The laths are connected at each end to the heavy duty drive chain ensuring smooth running in the side guides. A bottom rail is fitted to provide complete closure.Shutter box:Constructed from mild steel endplates fitted with bearing wheels for roller and gears with securing angles for bolting to the floor. The sides of the box are clad with steel sheets to complete the fire resisting assembly. The roller barrel is mounted on a central shaft which is retained in bearings and incorporates a patented constant tension spring mechanism to ensure even coiling.Side guides:Fabricated from mild steel plates designed for fitting to supporting balustrades or concrete block side walls. A section of the guide top plate is removable for maintenance purposes. Speed of operation: Approximately 10 m/minute.Fire resistance:Conforms to BS 476 - up to 4 hours fire resistance. L.P.C.B. Certified.Additional requirements:Audio/ visual panels.Balustrades for side guide support.Brush strips to the side guides.Fire resisting cladding for balustrades.Quartzoid bulb/ micro switch to activate the shutter.Smoke/ Heat detectors.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL505462.pdf&pg=0LPC approved

An electrically operated horizontal shutter designed to provide fire compartmentation between floors of shops, or stores where escalators, travelators or stairwells are present. Available in various configurations, the design parameters are versatile allowing the shutter to be incorporated within light wells or plant rooms as special tank covers. Variable escalator rake angles can be accommodated and fully horizontal arrangements are available. Each unit is factory tested and pre-assembled.

Curtain:

Constructed from curved section galvanized steel laths with malleable iron endlocks. The laths are connected at each end to the heavy duty drive chain ensuring smooth running in the side guides. A bottom rail is fitted to provide complete closure.

Shutter box:

Constructed from mild steel endplates fitted with bearing wheels for roller and gears with securing angles for bolting to the floor. The sides of the box are clad with steel sheets to complete the fire resisting assembly. The roller barrel is mounted on a central shaft which is retained in bearings and incorporates a patented constant tension spring mechanism to ensure even coiling.

Side guides:

Fabricated from mild steel plates designed for fitting to supporting balustrades or concrete block side walls. A section of the guide top plate is removable for maintenance purposes.

More about Escalator Fire Resistant Roller Shutters:
As standard - Options - Approvals - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Escalator Fire Resistant Roller Shutters.
 Size:
15 x 5 m.
 Operation:
[24V DC motor from battery supply with 240v single-phase, 50 Hz mains supply].
[415V AC, 3 phase, 50 Hz motor].
 Finish:
[Polyester powder coated].
[Standard galvanized shutter curtains and guide. Prime painted to non-galvanized components].


top ^

Guidance

for Escalator Fire Resistant Roller Shutters

from Bolton Gate Co Ltd

More about Escalator Fire Resistant Roller Shutters: As standard - Options - Approvals - Further information.

As standard

Speed of operation:

Approximately 10 m/minute.

Fire resistance:

Conforms to BS 476 - up to 4 hours fire resistance. L.P.C.B. Certified.

Options

Additional requirements:

  • Audio/ visual panels.
  • Balustrades for side guide support.
  • Brush strips to the side guides.Fire resisting cladding for balustrades.
  • Quartzoid bulb/ micro switch to activate the shutter.
  • Smoke/ Heat detectors.

Approvals

  • LPC approved .

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Fibreroll Rolling Fire Curtain from Bolton Gate Co LtdFibreroll Rolling Fire Curtain

A fire resisting and smoke curtain designed to restrict the lateral spread of fire, smoke and hot gases along the underside of a roof, ceiling or balcony within a building in the event of a fire.Designed for use as part of a fire control system and can be face fixed, soffit fixed or suspended on rods with a fixed section of curtain above to allow the passage of services.Curtain:Specially reinforced and coated fibreglass material able to withstand temperatures of more than 1000°C. Integrated roller mechanisms are attached to each end of the curtain to avoid deflection out of the side guides. Guides:Galvanized steel box section, prepared for fixing to the opening structure and incorporating a rebate to engage the curtain rollers.Weight: 30 kg/linear metre of width for roller and casing; 1 kg/m² for curtain.Operation: 24V DC tubular motor.Operating speed: Approximately 4.5 m per minute.Curtain thickness: Approximately 0.7 mm.Bottom rail: Double angle steel.Casing: 2 mm thick galvanized steel, prepared for fixing to the structure.Roller:Steel tube.Fire resistance:Conforms to BS 476-22: 2 hours fire resistance.Additional requirements: Fire rated infill above ceiling.Zoned operation for series of curtains.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL68472.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL84739.pdf&pg=

A fire resisting and smoke curtain designed to restrict the lateral spread of fire, smoke and hot gases along the underside of a roof, ceiling or balcony within a building in the event of a fire.

Designed for use as part of a fire control system and can be face fixed, soffit fixed or suspended on rods with a fixed section of curtain above to allow the passage of services.

Curtain:

Specially reinforced and coated fibreglass material able to withstand temperatures of more than 1000°C. Integrated roller mechanisms are attached to each end of the curtain to avoid deflection out of the side guides.

Guides:

Galvanized steel box section, prepared for fixing to the opening structure and incorporating a rebate to engage the curtain rollers.

More about Fibreroll Rolling Fire Curtain:
As standard - Options - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Fibreroll Rolling Fire Curtain.
 Size:
30 x 10 m.
 Finish:
[Polyester powder coated].
[Stainless steel].
[Standard galvanized].
 Additional requirements:
[Fire rated infill above ceiling].
[Zoned operation for series of curtains].


top ^

Guidance

for Fibreroll Rolling Fire Curtain

from Bolton Gate Co Ltd

More about Fibreroll Rolling Fire Curtain: As standard - Options - Further information.

As standard

Weight:

30 kg/linear metre of width for roller and casing; 1 kg/m² for curtain.

Operation:

24V DC tubular motor.

Operating speed:

Approximately 4.5 m per minute.

Curtain thickness:

Approximately 0.7 mm.

Bottom rail:

Double angle steel.

Casing:

2 mm thick galvanized steel, prepared for fixing to the structure.

Roller:

Steel tube.

Fire resistance:

Conforms to BS 476-22: 2 hours fire resistance.

Options

Additional requirements:

  • Fire rated infill above ceiling.
  • Zoned operation for series of curtains.

Further Information

Literature:



RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Fireroll E240 Vertical Rolling Shutters from Bolton Gate Co LtdFireroll E240 Vertical Rolling Shutters

An electrically operated shutter, fire resisting up to four hours, designed for department stores, shopping centres, warehouses, factories and car parks.The shutter fits directly to the face of the masonry opening.Curtain:Constructed from continuously interlocked 76 mm curved section steel laths, securely held in place by end locks. The lath thickness is 0.9 m or 1.2 mm depending on size. Bottom rails are galvanized and roll formed into a ‘Tee’ section.Guides:Channel section galvanized mild steel with slotted fixings for expansion in a fire are fixed to the jambs with continuous steel angles. Shutter box: 345 x 520 mm up to 525 x 680 mm depending on shutter size.Weight: Approximately 50 kg/m².Operation: 240V single-phase, 50 Hz Speedsafe motor.Endplates: Primer painted mild steel.Optional items:24V DC solenoid/ magnetic release systems.Audio/ visual panels.Electro thermal links.Heat/ smoke detectors.Polyester powder coating.Quartzoid bulb in lieu of fusible links.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL804810.pdf&pg=

An electrically operated shutter, fire resisting up to four hours, designed for department stores, shopping centres, warehouses, factories and car parks.

The shutter fits directly to the face of the masonry opening.

Curtain:

Constructed from continuously interlocked 76 mm curved section steel laths, securely held in place by end locks. The lath thickness is 0.9 m or 1.2 mm depending on size. Bottom rails are galvanized and roll formed into a ‘Tee’ section.

Guides:

Channel section galvanized mild steel with slotted fixings for expansion in a fire are fixed to the jambs with continuous steel angles.

More about Fireroll E240 Vertical Rolling Shutters:
As standard - Options - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Fireroll E240.
 Size:
[7 x 7 m]. - Blanket approval.
[12 x 8 m]. - Individual assessment.
 Finish:
[Polyester powder coated].
[Standard galvanized shutter curtains and guide, primer painted to non-galvanized components].
 Optional items:
[24V DC solenoid/ magnetic release systems].
[Audio/ visual panels].
[Electro thermal links].


top ^

Guidance

for Fireroll E240 Vertical Rolling Shutters

from Bolton Gate Co Ltd

More about Fireroll E240 Vertical Rolling Shutters: As standard - Options - Further information.

As standard

Shutter box:

345 x 520 mm up to 525 x 680 mm depending on shutter size.

Weight:

Approximately 50 kg/m².

Operation:

240V single-phase, 50 Hz Speedsafe motor.

Endplates:

Primer painted mild steel.

Options

Optional items:

  • 24V DC solenoid/ magnetic release systems.
  • Audio/ visual panels.
  • Electro thermal links.
  • Heat/ smoke detectors.
  • Polyester powder coating.
  • Quartzoid bulb in lieu of fusible links.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Fireroll E30/ 60 Fire Resisting Rolling Shutter from Bolton Gate Co LtdFireroll E30/ 60 Fire Resisting Rolling Shutter

Curtain:Constructed from continuously interlocking 51 x 0.9 mm thick flat faced galvanized steel laths securely held in place by endlocks on alternative laths. The bottom rail is formed from a lath reinforced with a flat steel bar to give uniformity of appearance.Guides:Vertical guides are fabricated from 51 x 25 mm galvanized steel channels which are attached to the supporting structure.Roller: Seamless steel tube supported on steel endplates by cups/bearings.Coil casing:Galvanized steel attached to the structure by M6 bolts. An additional casing covers the motor and chain drive.Shutter box: 260 x 290 mm up to 2100 mm high; 330 x 360 up to 3000 mm high.Weight: Approximately 25 kg/m².Operation: Tubular motor to suit a 240V single-phase, 50 Hz mains supply.Optional items:Polyester powder coated finish to a standard RAL or BS colour.Smoke/ heat detectors.Stainless steel construction.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL836683.pdf&pg=0LPC approved

Curtain:

Constructed from continuously interlocking 51 x 0.9 mm thick flat faced galvanized steel laths securely held in place by endlocks on alternative laths. The bottom rail is formed from a lath reinforced with a flat steel bar to give uniformity of appearance.

Guides:

Vertical guides are fabricated from 51 x 25 mm galvanized steel channels which are attached to the supporting structure.

Roller:

Seamless steel tube supported on steel endplates by cups/bearings.

Coil casing:

Galvanized steel attached to the structure by M6 bolts. An additional casing covers the motor and chain drive.

More about Fireroll E30/ 60 Fire Resisting Rolling Shutter:
As standard - Options - Approvals - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Fireroll E30/ 60.
 Size:
4 x 2.5 m.
 Finish:
[Polyester powder coated].
[Standard galvanized shutter curtains and guide, primer painted to non-galvanized components].
 Optional items:
[Polyester powder coated finish to a standard RAL or BS colour].
[Smoke/ heat detectors].
[Stainless steel construction].


top ^

Guidance

for Fireroll E30/ 60 Fire Resisting Rolling Shutter

from Bolton Gate Co Ltd

More about Fireroll E30/ 60 Fire Resisting Rolling Shutter: As standard - Options - Approvals - Further information.

As standard

Shutter box:

260 x 290 mm up to 2100 mm high; 330 x 360 up to 3000 mm high.

Weight:

Approximately 25 kg/m².

Operation:

Tubular motor to suit a 240V single-phase, 50 Hz mains supply.

Options

Optional items:

  • Polyester powder coated finish to a standard RAL or BS colour.
  • Smoke/ heat detectors.
  • Stainless steel construction.

Approvals

  • LPC approved .

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Roller Shutter from Bolton Gate Co LtdRoller Shutter

A range of non-fire rated vertical roller shutters designed for internal and external use for large and small openings.Curtain:Constructed from continuously interlocking galvanized steel laths, securely held in place by end locks. Various thicknesses and profiles are available according to individual criteria such as size, wind loading etc. Bottom rails are generally galvanized and roll-formed into a ‘Tee’ section.Guides:Vertical guides are formed from rolled steel or fabricated dependent on size and wind loading and are supplied with suitable angles for fixing to the structure.Endplates: Primer painted mild steel with angles for fixing to structure.Barrel: Constructed from seamless steel tube and held in bearings or cups attached to the endplates.Shutter box: 300 x 300 mm up to 1000 x 1000 mm depending on type and size.Weight: Typically 35 kg/m².Additional requirements: Galvanized steel hood and fascia.Wicket doors.Controls: Connection to building management system.Remote operation by card reader/ photocell/ loop detectors.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL78129.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL561860.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL356672.pdf&pg=http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL741495.pdf&pg=

A range of non-fire rated vertical roller shutters designed for internal and external use for large and small openings.

Curtain:

Constructed from continuously interlocking galvanized steel laths, securely held in place by end locks. Various thicknesses and profiles are available according to individual criteria such as size, wind loading etc. Bottom rails are generally galvanized and roll-formed into a ‘Tee’ section.

Guides:

Vertical guides are formed from rolled steel or fabricated dependent on size and wind loading and are supplied with suitable angles for fixing to the structure.

Endplates:

Primer painted mild steel with angles for fixing to structure.

Barrel:

Constructed from seamless steel tube and held in bearings or cups attached to the endplates.

More about Roller Shutter:
As standard - Options - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Roller Shutter.
 Size:
12 x 10 m.
 Operation:
[Chain].
[Electrical].
[Self coiling].
 Lath design:
[Perforated].
[Plain].
[Punched].
 Finish:
[Polyester powder coated].
[Standard galvanized shutter curtains and guide. Primer painted to non-galvanized components].
 Controls:
[Connection to building management system].
[Remote operation by card reader].
[Remote operation by loop detectors].
 Additional requirements:
[Galvanized steel hood and fascia].
[Wicket doors].


top ^

Guidance

for Roller Shutter

from Bolton Gate Co Ltd

More about Roller Shutter: As standard - Options - Further information.

As standard

Shutter box:

300 x 300 mm up to 1000 x 1000 mm depending on type and size.

Weight:

Typically 35 kg/m².

Options

Additional requirements:

  • Galvanized steel hood and fascia.
  • Wicket doors.

Controls:

  • Connection to building management system.
  • Remote operation by card reader/ photocell/ loop detectors.

Further Information

Literature:





RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Stainless Steel Rolling Grille from Bolton Gate Co LtdStainless Steel Rolling Grille

An electrically operated vertical rolling grille designed for openings where a good degree of security is required and where selective entry/ exit is required in shopping malls and underground car parks where it also provides optimum ventilation.The grilles are custom made to suit individual requirements and can be face fixed or fixed between the structure.Curtain:Constructed from Grade 304 stainless steel tubes and links to give a parallel mesh of 500 x 85 mm. Continuous horizontal steel inner tubes provide strength against bowing and are capped/ pinned to prevent lateral movement. The bottom rail is formed from 2 angles or a box section, polyester powder coated silver.Guides:Formed from galvanized steel channels and fitted with suitable steel angles for bolting to the opening structure.Brackets: Fabricated from mild steel with support angles for fixing to the opening structure. Bearings are fitted at either end to support the roller shaft.Weight: Approximately 25 kg/m².Roller: Steel tube. Optional coil casings: 475 x 525 mm to 575 x 625 mm depending on shutter size. Additional requirements:Coil casings and fascias.Key switches.Remote control.Safety photocells.Solenoid locking shootbolts.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=00979&f=COL396365.pdf&pg=

An electrically operated vertical rolling grille designed for openings where a good degree of security is required and where selective entry/ exit is required in shopping malls and underground car parks where it also provides optimum ventilation.

The grilles are custom made to suit individual requirements and can be face fixed or fixed between the structure.

Curtain:

Constructed from Grade 304 stainless steel tubes and links to give a parallel mesh of 500 x 85 mm. Continuous horizontal steel inner tubes provide strength against bowing and are capped/ pinned to prevent lateral movement. The bottom rail is formed from 2 angles or a box section, polyester powder coated silver.

Guides:

Formed from galvanized steel channels and fitted with suitable steel angles for bolting to the opening structure.

Brackets:

Fabricated from mild steel with support angles for fixing to the opening structure. Bearings are fitted at either end to support the roller shaft.

More about Stainless Steel Rolling Grille:
As standard - Options - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Stainless Steel Rolling Grille.
 Size:
10 x 5 m.
 Operation:
[415V, 3 phase, 50 Hz electric motor].
[Heavy duty motor].
[Tubular motor].
 Finish:
[Polyester powder coated].
[Standard galvanized finish to shutter curtains. Prime painted to non-galvanized components].
 Additional requirements:
[Coil casing and fascia].
[Key switches].
[Remote control].


top ^

Guidance

for Stainless Steel Rolling Grille

from Bolton Gate Co Ltd

More about Stainless Steel Rolling Grille: As standard - Options - Further information.

As standard

Weight:

Approximately 25 kg/m².

Roller:

Steel tube.

Options

Optional coil casings:

475 x 525 mm to 575 x 625 mm depending on shutter size.

Additional requirements:

  • Coil casings and fascias.
  • Key switches.
  • Remote control.
  • Safety photocells.
  • Solenoid locking shootbolts.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 

View larger image of Supercoil Smoke Curtain from Bolton Gate Co LtdSupercoil Smoke Curtain

Designed to restrict the lateral spread of smoke and hot gases along the underside of a roof, ceiling or balcony within a building in the event of a fire, for use as part of a smoke control system to create smoke reservoirs from which smoke and hot gases can be extracted or to stop the spread of smoke. They can be face fixed, soffit fixed or suspended on rods. Curtain:Specially coated grey fibreglass material with a Class 1 surface spread of flame rating and able to withstand temperatures of 600°C. Bottom rail: Triangular section steel, attached to the curtain and designed to stop at ceiling level or into a recess in the box when raised.Roller: The curtain coils onto a tubular steel roller mounted on endplate bearings.Box: The roller and coiled-up curtain are housed in a 2 mm thick galvanized head box, which is prepared for fixing to the building structure.Weight: Typically 30 kg/linear metre of width for curtain, box and bottom rail.Operating speed: Approximately 4.5 m per minute.Curtain thickness: Approximately 0.7 mm.Curtain weight: 635 g/m².Additional requirements: Steel guides. Zoned operation for series of curtains.

Designed to restrict the lateral spread of smoke and hot gases along the underside of a roof, ceiling or balcony within a building in the event of a fire, for use as part of a smoke control system to create smoke reservoirs from which smoke and hot gases can be extracted or to stop the spread of smoke. They can be face fixed, soffit fixed or suspended on rods.

Curtain:

Specially coated grey fibreglass material with a Class 1 surface spread of flame rating and able to withstand temperatures of 600°C.

Bottom rail:

Triangular section steel, attached to the curtain and designed to stop at ceiling level or into a recess in the box when raised.

Roller:

The curtain coils onto a tubular steel roller mounted on endplate bearings.

Box:

The roller and coiled-up curtain are housed in a 2 mm thick galvanized head box, which is prepared for fixing to the building structure.

More about Supercoil Smoke Curtain:
As standard - Options - Further information.

PendingROLLER SHUTTERS:
 Manufacturer:
Bolton Gate Co Ltd.
  -Web:www.boltongate.co.uk.
  -Tel:+44 (0)1204 871001.
  -Product reference:
Supercoil Smoke Curtain.
 Size:
30 x 8 m.
 Operation:
[24V DC tubular motion].
[415V, 3 phase external drive motor].
 Finish:
[Polyester powder coated].
[Stainless steel].
[Standard galvanized].
 Additional requirements:
[Steel guides].
[Zoned operation for series of curtains].


top ^

Guidance

for Supercoil Smoke Curtain

from Bolton Gate Co Ltd

More about Supercoil Smoke Curtain: As standard - Options - Further information.

As standard

Weight:

Typically 30 kg/linear metre of width for curtain, box and bottom rail.

Operating speed:

Approximately 4.5 m per minute.

Curtain thickness:

Approximately 0.7 mm.

Curtain weight:

635 g/m².

Options

Additional requirements:

  • Steel guides.
  • Zoned operation for series of curtains.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for Bolton Gate Co Ltd from ribaproductselector.com.

Contacts:

www.boltongate.co.uk

sales@boltongate.co.uk

T: +44 (0)1204 871001

F: +44 (0)1204 871049

top ^

 
Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 12 December 2017