A-Z Manufacturers (BIS Door Systems Ltd) |  CAWS Index (L20 610)
BIS Door Systems Ltd

BIS Door Systems Ltd

www.bis-doors.co.uk

sales@bis-doors.co.uk

T: +44 (0)1268 767566

F: +44 (0)1268 560284

13 Hodgson Court, Hodgson Way, Wickford, Essex. SS11 8XR

RIBA Product Selector

This NBS Plus page covers roller shutter and garage door roller shutter

relating to clause 610 ROLLER SHUTTERS/ CURTAINS

in L20 Doors/ shutters/ hatches.

For more NBS Plus information from this company, see the BIS Door Systems Ltd overview page which includes a clause list and a product list.


Products from BIS Door Systems Ltd

BIS Door Systems Ltd offers a design and specification service, consultation early in the design process is recommended.

Bookmark
Calisto EX37 - Continental aluminium roller shutters.
Bookmark
Europa Insulated Roller Garage Door - Powered domestic garage door roller shutter.
Bookmark
Roller Shutter Doors - Commercial - Roller shutters for commercial applications.
Bookmark
Roller Shutter Doors - Industrial - Roller shutters for industrial applications.
 

View larger image of Calisto EX37 from BIS Door Systems LtdCalisto EX37

Roller shutters featuring 37 mm, double skin extruded aluminium slats. They are lightweight and strong and are designed with security and appearance in mind. Suitable for domestic and commercial applications such as offices, small shop fronts, school cabinets and catering equipment and garage doors with restricted headroom. Available in two colour options.Side guides:Incorporate double brush seals to assist in the smooth and quiet operation of the curtain. They are factory drilled and supplied with fixings and hole cover caps.Shutter box:Die cast aluminium end plates, connected a by a two piece pre-formed aluminium casing to completely enclose the workings of the shutter.Size:Available up to a height of 5 m and width of 4 m for electric operation and up to a height of 2.8 m and width of 4 m for manual operation. The maximum sizes available are dependent on the individual application and the relative height and width required. For example, if a height of 5 m is required, the maximum width available would be 2.4 m. Consult manufacturer for more information.Slats:37 x 9.5 mm, double skin extruded aluminium. The curtain is fully end locked and includes a 41 mm high bottom slat with a rubber weather seal. For applications that require light or vision to pass through the shutter, non insulated punched and glazed slats can be incorporated into the door curtain.Fixing:Dependent on the application of the roller shutter. Face fixing is the most common method for built on applications. Reveal fixing is particularly suitable for doorway and cabinet applications.

Roller shutters featuring 37 mm, double skin extruded aluminium slats. They are lightweight and strong and are designed with security and appearance in mind. Suitable for domestic and commercial applications such as offices, small shop fronts, school cabinets and catering equipment and garage doors with restricted headroom. Available in two colour options.

More about Calisto EX37:
As standard - Options - Further information.

PendingROLLER SHUTTER:
 Manufacturer:
BIS Door Systems Ltd.
  -Web:www.bis-doors.co.uk.
  -Tel:+44 (0)1268 767566.
  -Product reference:
Calisto EX37.
 Size:
[ ______ ] - Insert requirement.
 Fixing:
[Face]. - For built-on applications.
[Reveal]. - For doorway and cabinet applications.
[Face and reveal]. - For a combination of both applications.
 Colour:
[Brown].
[White].
[Special order]. - Insert RAL or BS colour.
 Side guides:
[53 x 22 mm]. - Standard.
[66 x 22 mm]. - For increased security.
 Slats:
[Non insulated punched and glazed slats].
[Manufacturer's standard]. - 37 x 9.5 mm double skin extruded aluminium.
 Operation:
  -Type:
[Electric].
[Gearbox]. - Folding crank road for manual operation.
[Manual self coiling]. - Can be lifted up and pulled down by hand.
  -Controls:
[Not applicable]. - For gearbox, manual self coiling and swivel belt.
[Digital keypad].
[Key switch].


top ^

Guidance

for Calisto EX37

from BIS Door Systems Ltd

More about Calisto EX37: As standard - Options - Further information.

As standard

Side guides:

Incorporate double brush seals to assist in the smooth and quiet operation of the curtain. They are factory drilled and supplied with fixings and hole cover caps.

Shutter box:

Die cast aluminium end plates, connected a by a two piece pre-formed aluminium casing to completely enclose the workings of the shutter.

Options

Size:

Available up to a height of 5 m and width of 4 m for electric operation and up to a height of 2.8 m and width of 4 m for manual operation. The maximum sizes available are dependent on the individual application and the relative height and width required. For example, if a height of 5 m is required, the maximum width available would be 2.4 m. Consult manufacturer for more information.

Slats:

37 x 9.5 mm, double skin extruded aluminium. The curtain is fully end locked and includes a 41 mm high bottom slat with a rubber weather seal. For applications that require light or vision to pass through the shutter, non insulated punched and glazed slats can be incorporated into the door curtain.

Fixing:

Dependent on the application of the roller shutter. Face fixing is the most common method for built on applications. Reveal fixing is particularly suitable for doorway and cabinet applications.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for BIS Door Systems Ltd from ribaproductselector.com.

Contacts:

www.bis-doors.co.uk

sales@bis-doors.co.uk

T: +44 (0)1268 767566

F: +44 (0)1268 560284

top ^

 

View larger image of Europa Insulated Roller Garage Door from BIS Door Systems LtdEuropa Insulated Roller Garage Door

Powered domestic garage door roller shutter which combines all the advantages and conveniences of a power operated rolling shutter with the required aesthetics of a garage door. It is designed to improve on many of the qualities of both sectional overhead doors and traditional steel roller shutters.The tightly coiling nature of the door curtain allows the optimum drive through clearance and the smooth vertical opening enables a vehicle to be parked directly up to the door. It includes pocket transmitters to remotely activate the door and a choice of colours and simulated wood grains are available.Axle:70 mm, octagonal.Laths:Corrosion resistant polyester powder coated outer skin with foam filled insulated core. For applications that require light or vision to pass through the door, non insulated punched and glazed slats can be incorporated into the door curtain.Operation:Powered by a Somfy motor with five year warranty. It includes push button limit settings and a manual override facility in case of power failure.Remote control:The garage door is supplied complete with a PDT Rollertec remote control unit.Security:In the event of an attempted forced entry into the door, the security locking devices which connects the curtain to the barrel of the door automatically lock up.Side guides:Incorporates double brush seals to eliminate draughts and assist in the smooth operation of the curtain.Type: - Standard:Constructed with 77 x 20 mm laths, It is suitable for people carriers and 4 x 4 vehicles and includes pocket transmitters to remotely activate the door. - Europa Compact:Offers all the benefits of the standard Europa garage door but in a condensed design to help utilize as much space as possible. It is constructed using smaller 55 x 14 mm laths and a smaller and tighter coil than the standard Europa, allowing for headroom as little as 205 mm.

Powered domestic garage door roller shutter which combines all the advantages and conveniences of a power operated rolling shutter with the required aesthetics of a garage door. It is designed to improve on many of the qualities of both sectional overhead doors and traditional steel roller shutters.

The tightly coiling nature of the door curtain allows the optimum drive through clearance and the smooth vertical opening enables a vehicle to be parked directly up to the door. It includes pocket transmitters to remotely activate the door and a choice of colours and simulated wood grains are available.

More about Europa Insulated Roller Garage Door:
As standard - Options - Further information.

PendingGARAGE DOOR ROLLER SHUTTER:
 Manufacturer:
BIS Door Systems Ltd.
  -Web:www.bis-doors.co.uk.
  -Tel:+44 (0)1268 767566.
  -Product reference:
Europa Insulated Roller Garage Door.
 Type:
[Standard]. - Available up to 5400 mm wide and 4000 mm high.
[Europa Compact]. - Condensed design, available up to 2800 mm wide and 3500 mm high.
 Size:
[ ______ ] - Insert requirement.
 Colour:
  -Curtain:
[Aluminium metallic]. - Non-textured.
[Beige]. - Non-textured.
[Black]. - Non-textured.
  -Framework/ head of door:
[Brown].
[White].
  -Side guides:
[95 x 34 mm]. - Standard.
[70 x 34 mm].
 Accessories:
[None].
[Digital pads].
[Push buttons].


top ^

Guidance

for Europa Insulated Roller Garage Door

from BIS Door Systems Ltd

More about Europa Insulated Roller Garage Door: As standard - Options - Further information.

As standard

Axle:

70 mm, octagonal.

Laths:

Corrosion resistant polyester powder coated outer skin with foam filled insulated core. For applications that require light or vision to pass through the door, non insulated punched and glazed slats can be incorporated into the door curtain.

Operation:

Powered by a Somfy motor with five year warranty. It includes push button limit settings and a manual override facility in case of power failure.

Remote control:

The garage door is supplied complete with a PDT Rollertec remote control unit.

Security:

In the event of an attempted forced entry into the door, the security locking devices which connects the curtain to the barrel of the door automatically lock up.

Side guides:

Incorporates double brush seals to eliminate draughts and assist in the smooth operation of the curtain.

Options

Type:

- Standard:

Constructed with 77 x 20 mm laths, It is suitable for people carriers and 4 x 4 vehicles and includes pocket transmitters to remotely activate the door.

- Europa Compact:

Offers all the benefits of the standard Europa garage door but in a condensed design to help utilize as much space as possible. It is constructed using smaller 55 x 14 mm laths and a smaller and tighter coil than the standard Europa, allowing for headroom as little as 205 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for BIS Door Systems Ltd from ribaproductselector.com.

Contacts:

www.bis-doors.co.uk

sales@bis-doors.co.uk

T: +44 (0)1268 767566

F: +44 (0)1268 560284

top ^

 

View larger image of Roller Shutter Doors - Commercial from BIS Door Systems LtdRoller Shutter Doors - Commercial

Roller shutters providing security solutions to shop front entrances, windows, doorways, bar counters, garages and other high risk situations. They are available as either manually or electronically operated and a range of curtain and accessory options are available. The shutters include a shutter curtain, a roller barrel to house the curtain, end plates to support the roller barrel assembly and side guide channels.Finish:Aluminium: One coat primer with one coat silver hammer gloss.Fleur-de-lys: White injection moulded plastic.Galvanized steel: Natural.Other finishes can be applied by special order, such as powder coating to any BS or RAL colour, a plastisol finish to one side from the HSP200 range or galvanized aluminium curtains. Contact manufacturer for more information.Operation: - Electric, single phase:For commercial applications where the door is only required to operate a limited number of times a day. Carbon steel 'flag-post' design guide assemblies are fixed vertically to the structure surrounding the aperture to support the roller barrel assembly, housing an internally fitted, single phase, 240 V AC motor. A manual override hand crank facility is available in the event of a power failure.- Manual, self coiling:For smaller apertures where the door is open or closed a limited number of times a day. The curtain of the door is manually raised, assisted by counter balancing springs within the roller barrel assembly. Carbon steel 'flag-post' design guide assemblies are fixed vertically to the structure surrounding the aperture to support the roller barrel assembly onto which the roller shutter curtain is secured. The maximum size available is 3658 x 3658 mm.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=01074&f=COL718912.pdf&pg=

Roller shutters providing security solutions to shop front entrances, windows, doorways, bar counters, garages and other high risk situations. They are available as either manually or electronically operated and a range of curtain and accessory options are available. The shutters include a shutter curtain, a roller barrel to house the curtain, end plates to support the roller barrel assembly and side guide channels.

More about Roller Shutter Doors - Commercial:
As standard - Options - Further information.

PendingROLLER SHUTTER:
 Manufacturer:
BIS Door Systems Ltd.
  -Web:www.bis-doors.co.uk.
  -Tel:+44 (0)1268 767566.
  -Product reference:
Roller Shutter Doors - Commercial.
 Size:
[ ______ ] - Insert requirement.
 Operation:
  -Type:
[Electric, single phase].
[Manual self coiling]. - For smaller apertures.
  -Controls:
[Not applicable]. - For manual, self coiling.
[Key switch].
[Radio transmitter].
 Curtain:
  -Type:
[76 mm galvanized steel solid concave lath]. - Standard, for most applications.
[50 mm aluminium flat lath]. - For counters and servery hatches, 1.4 mm thick.
[50 mm galvanized steel flat lath]. - For most applications.
  -Thickness:
[Not applicable]. - For 50 mm aluminium flat lath, Fleur-de-lys and Tube and link grilles.
[18 gauge]. - Not available with 50 mm galvanized steel flat lath.
[20 gauge].
 Side guides:
[Manufacturer's standard].
[Windlock]. - For doors above 4500 mm wide or subject to high wind loading.
 Accessories:
[None].
[Bullet locks]. - For manual doors.
[Casing box]. - To conceal the coil assembly.


top ^

Guidance

for Roller Shutter Doors - Commercial

from BIS Door Systems Ltd

More about Roller Shutter Doors - Commercial: As standard - Options - Further information.

As standard

Finish:

  • Aluminium: One coat primer with one coat silver hammer gloss.
  • Fleur-de-lys: White injection moulded plastic.
  • Galvanized steel: Natural.

Other finishes can be applied by special order, such as powder coating to any BS or RAL colour, a plastisol finish to one side from the HSP200 range or galvanized aluminium curtains. Contact manufacturer for more information.

Options

Operation:

- Electric, single phase:

For commercial applications where the door is only required to operate a limited number of times a day. Carbon steel 'flag-post' design guide assemblies are fixed vertically to the structure surrounding the aperture to support the roller barrel assembly, housing an internally fitted, single phase, 240 V AC motor. A manual override hand crank facility is available in the event of a power failure.

- Manual, self coiling:

For smaller apertures where the door is open or closed a limited number of times a day. The curtain of the door is manually raised, assisted by counter balancing springs within the roller barrel assembly. Carbon steel 'flag-post' design guide assemblies are fixed vertically to the structure surrounding the aperture to support the roller barrel assembly onto which the roller shutter curtain is secured. The maximum size available is 3658 x 3658 mm.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for BIS Door Systems Ltd from ribaproductselector.com.

Contacts:

www.bis-doors.co.uk

sales@bis-doors.co.uk

T: +44 (0)1268 767566

F: +44 (0)1268 560284

top ^

 

View larger image of Roller Shutter Doors - Industrial from BIS Door Systems LtdRoller Shutter Doors - Industrial

Roller shutters providing access and security solutions to loading bays, goods stores, car park entrances and other high usage applications. They are available as either manually or electronically operated and a range of curtain and accessory options are available. The shutters include a shutter curtain, a roller barrel to house the curtain, end plates to support the roller barrel assembly and side guide channels.Finish:Galvanized steel. Other finishes can be applied by special order, such as powder coating to any BS or RAL colour or a plastisol finish to one side from the HSP200 range. Contact manufacturer for more information.Size:Larger sizes can be requested by special order, contact manufacturer for more details.Operation:- Electric, three phase:For industrial applications which require frequent usage. All components are identical to the manually operated door, except for a three phase, 415 V AC motor instead of a hand chain wheel drive mechanism. Actuation is via an up, down and stop push button station and a manual override continuous haul chain is provided as standard in the event of power failure. - Manual, hand chain:For smaller apertures which require less frequent usage. The curtain of the door is manually raised via a continuous haul chain which drives the fully sprung, counter balanced roller barrel assembly. The roller barrel assembly is suspended by mild steel end plates.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=01074&f=COL718912.pdf&pg=

Roller shutters providing access and security solutions to loading bays, goods stores, car park entrances and other high usage applications. They are available as either manually or electronically operated and a range of curtain and accessory options are available. The shutters include a shutter curtain, a roller barrel to house the curtain, end plates to support the roller barrel assembly and side guide channels.

More about Roller Shutter Doors - Industrial:
As standard - Options - Further information.

PendingROLLER SHUTTER:
 Manufacturer:
BIS Door Systems Ltd.
  -Web:www.bis-doors.co.uk.
  -Tel:+44 (0)1268 767566.
  -Product reference:
Roller Shutter Doors - Industrial.
 Size:
[ ______ ] - Insert requirement, available up to 9000 mm high and 9000 mm wide.
 Operation:
[Electric, three phase]. - For frequent usage.
[Manual, hand chain]. - For less frequent usage.
 Curtain:
  -Type:
[76 mm galvanized steel solid concave lath]. - Standard, for most applications.
[50 mm galvanized steel flat lath]. - For most applications.
[76 mm galvanized steel perforated concave lath]. - For most applications.
  -Thickness:
[Not applicable]. - For Insulated galvanized steel lath.
[18 gauge]. - Not available with 50 mm galvanized steel flat lath.
[20 gauge].
 Actuation/ Safety systems:
[Not applicable]. - For manual operation.
[Manufacturer's standard].
[Induction loop].
 Side guides:
[Manufacturer's standard].
[Windlock]. - For doors above 4500 mm wide or subject to high wind loading.
 Accessories:
[None].
[Bullet locks]. - For manual doors.
[Casing box]. - To conceal the coil assembly.


top ^

Guidance

for Roller Shutter Doors - Industrial

from BIS Door Systems Ltd

More about Roller Shutter Doors - Industrial: As standard - Options - Further information.

As standard

Finish:

Galvanized steel. Other finishes can be applied by special order, such as powder coating to any BS or RAL colour or a plastisol finish to one side from the HSP200 range. Contact manufacturer for more information.

Options

Size:

Larger sizes can be requested by special order, contact manufacturer for more details.

Operation:

- Electric, three phase:

For industrial applications which require frequent usage. All components are identical to the manually operated door, except for a three phase, 415 V AC motor instead of a hand chain wheel drive mechanism. Actuation is via an up, down and stop push button station and a manual override continuous haul chain is provided as standard in the event of power failure.

- Manual, hand chain:

For smaller apertures which require less frequent usage. The curtain of the door is manually raised via a continuous haul chain which drives the fully sprung, counter balanced roller barrel assembly. The roller barrel assembly is suspended by mild steel end plates.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for BIS Door Systems Ltd from ribaproductselector.com.

Contacts:

www.bis-doors.co.uk

sales@bis-doors.co.uk

T: +44 (0)1268 767566

F: +44 (0)1268 560284

Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 11 December 2017