A-Z Manufacturers (ASSA ABLOY Entrance Systems Ltd - Industrial) |  CAWS Index (L20 617)
ASSA ABLOY Entrance Systems Ltd - Industrial

ASSA ABLOY Entrance Systems Ltd - Industrial

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

Industrial Door & Docking Solutions, 7 Churchill Way, 35a Business Park, Chapeltown, Sheffield, South Yorkshire. S35 2PY

RIBA Product Selector

This NBS Plus page covers loading bay door, loading bay dock leveller, dock leveller, loading bay shelter seal, loading bay shelter and inflatable roller airbag shelter

relating to clause 617 LOADING BAY DOOR AND DOCKING SYSTEM

in L20 Doors/ shutters/ hatches.

For more NBS Plus information from this company, see the ASSA ABLOY Entrance Systems Ltd - Industrial overview page which includes a clause list and a product list.


Products from ASSA ABLOY Entrance Systems Ltd - Industrial

Crawford can provide a design and specification service; consultation early in the design process is recommended.

Select to expand
Loading bay door (1)
Select to expand
Dock leveller (9)
Select to expand
Dock shelter/ Load house (4)
 

View larger image of Crawford 542 D Door from ASSA ABLOY Entrance Systems Ltd - IndustrialCrawford OH1042D Dock Door

An overhead sectional door for logistic applications in conjunction with dock loading systems.Size:Maximum: 3000 x 3000 mm.Arrangement: Vertical lift on counterbalance springs, mounted on a galvanized, hexagonal shaft, installed at low level.Complete with spring and cable break anti-drop devices, anti lift device, flush hinges and roller brackets, inset lifting handle, EPDM perimeter and horizontal joint seals and finger pinch protection to horizontal joints. Track system: Vertical Lift VLL - 1 piece, galvanized tracks complete with 25 mm thermal movement provision. Door panels: 600 mm deep, 42 mm thick process laminated steel panels with internal steel bands and insulated with CFC free polyurethane. Panel design incorporates a horizontal micro ribbed surface to the inner and outer faces. Ironmongery:Internal sliding shootbolt with interlocked micro switch to prevent motor and door damage.Performance: EN 12424 Wind resistance Class 3 – minimum 700 N/m².EN 12425 Water penetration Class 3 – 70 Pa resistance.EN 12426 Air permeability Class 2 – air tightness of 8.5 m³/m²/h.Fire resistance performance to DIN 4102.Operation: D3 kit with 2 x 24 volt AC relays to allow interlocking to a dock leveller, traffic light or dock light.ECS 930A , 0.37 kW, IP 55 rated, shaft mounted electrical operator requiring 240 volt single phase supply.Up, stop, down push button station with single impulse up and down operation and self monitoring safety edge.Windows:1 row DAOP, double acrylic in a polycarbonate frame with rounded ends, internal dimensions 590 x 270 mm.1 row DARP, double acrylic in a polycarbonate rectangular frame, internal dimensions 600 x 290 mm.1 row/ single type DDR, double acrylic in a polycarbonate frame internal dimensions 567 x 135 mm. Single aluminium spy hole type.Other requirements: Combination control panel (normally specified within the Dock Leveller position).External numeral.External security cylinder lock set into the door panel.Internal numeral.Internal security cylinder lock set into the door panel.Ventilators.

An overhead sectional door for logistic applications in conjunction with dock loading systems.

More about Crawford OH1042D Dock Door:
As standard - Options - Further information.

PendingLOADING BAY DOOR:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford OH1042D Dock Door.
 Size:
[As drawing].
[As schedule].
 Door leaf:
  -Internal finish:
[Pre-coated polyester RAL9002].
  -External finish:
[PS 24W/ RAL 3002 Carmine Red].
[PS 28W/ RAL 1021 Rape Yellow].
[PS 20W/ RAL 5010 Gentian Blue].
 Operation:
[D3 kit with 2 x 24 volt AC relays to allow interlocking to a dock leveller, traffic light or dock light].
[ECS 930A , 0.37 kW, IP 55 rated, shaft mounted electrical operator requiring 240 volt single phase supply].
[Up, stop, down push button station with single impulse up and down operation and self monitoring safety edge].
 Windows:
[None].
[1 row DAOP, double acrylic in a polycarbonate frame with rounded ends, internal dimensions 590 x 270 mm].
[1 row DARP, double acrylic in a polycarbonate rectangular frame, internal dimensions 600 x 290 mm].
 Other requirements:
[Combination control panel].
[External numeral].
[External security cylinder lock set into the door panel].


top ^

Guidance

for Crawford OH1042D Dock Door

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford OH1042D Dock Door: As standard - Options - Further information.

As standard

Size:

Maximum: 3000 x 3000 mm.

Arrangement:

  • Vertical lift on counterbalance springs, mounted on a galvanized, hexagonal shaft, installed at low level.
  • Complete with spring and cable break anti-drop devices, anti lift device, flush hinges and roller brackets, inset lifting handle, EPDM perimeter and horizontal joint seals and finger pinch protection to horizontal joints.

Track system:

Vertical Lift VLL - 1 piece, galvanized tracks complete with 25 mm thermal movement provision.

Door panels:

600 mm deep, 42 mm thick process laminated steel panels with internal steel bands and insulated with CFC free polyurethane. Panel design incorporates a horizontal micro ribbed surface to the inner and outer faces.

Ironmongery:

Internal sliding shootbolt with interlocked micro switch to prevent motor and door damage.

Performance:

  • EN 12424 Wind resistance Class 3 – minimum 700 N/m².
  • EN 12425 Water penetration Class 3 – 70 Pa resistance.
  • EN 12426 Air permeability Class 2 – air tightness of 8.5 m³/m²/h.
  • Fire resistance performance to DIN 4102.

Options

Operation:

  • D3 kit with 2 x 24 volt AC relays to allow interlocking to a dock leveller, traffic light or dock light.
  • ECS 930A , 0.37 kW, IP 55 rated, shaft mounted electrical operator requiring 240 volt single phase supply.
  • Up, stop, down push button station with single impulse up and down operation and self monitoring safety edge.

Windows:

  • 1 row DAOP, double acrylic in a polycarbonate frame with rounded ends, internal dimensions 590 x 270 mm.
  • 1 row DARP, double acrylic in a polycarbonate rectangular frame, internal dimensions 600 x 290 mm.
  • 1 row/ single type DDR, double acrylic in a polycarbonate frame internal dimensions 567 x 135 mm.
  • Single aluminium spy hole type.

Other requirements:

  • Combination control panel (normally specified within the Dock Leveller position).
  • External numeral.
  • External security cylinder lock set into the door panel.
  • Internal numeral.
  • Internal security cylinder lock set into the door panel.
  • Ventilators.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

View larger image of Crawford 630 Combidock from ASSA ABLOY Entrance Systems Ltd - IndustrialCrawford DL6030C Combidock

An electric hydraulic telescopic lip dock leveller door designed to accommodate a large variance in vehicle heights, i.e. lightweight vans to containers.Incorporates:Twin hydraulic cylinders with emergency stop valves to guarantee the leveller will function in any operating position and ensure maximum platform stability.Emergency on/ off switch to ensure the leveller is automatically locked in position if there is a power failure or if the emergency switch is turned off.A reset function which prevents movement of the leveller when an interrupted power supply is restored. The leveller is reactivated by tipping the ‘Raise’ button.4 mm thick black and yellow striped toe guards on both sides of the leveller which give protection when the leveller is above dock level.6-8 mm thick tear-plate platform surface to prevent slipping.The single axle load capacity is calculated as two 150 x 150 mm contact areas at 1 metre lateral centre distance.EN 1398 stipulates the maximum gradient of a dock leveller during loading must not exceed 12.5% (1 in 8).Inspection stay is supplied as standard.100 mm side tilt.500 mm long, steel telescopic lip profiled to help prevent ‘grounding out’ of material handling equipment and a 40 mm chamfer to the leading edge. Central 1000 mm wide section of the lip to be independently operated ensuring a maximum load of only 20 kN is imposed, for use with lightweight vehicles.Rack and pinion gearing to ensure smooth and accurate operation of the lip. CE marked with manufactures declaration of conformity.Combidock control panel, incorporating:Up/down operation, lip extend and ‘town mode’ button ensuring only the central 1000 mm section of the lip extends for use with lightweight vehicles. Electric interlock between door and leveller.Automatic operation of traffic lights and dock lights (where required).Type: T frame complete with height adjusting screws and casting tags – for use with pre cast concrete pits.Platform configuration:Width: 2250 mm.Length: 5700 mm.Gradient length: 4400 mm.Front 1300 mm of platform to operate horizontally and be supported by 2 hydraulic support legs.Maximum operating height above dock 450 mm.Minimum operating height below dock 850 mm. Based upon a leveller height of 1960 mm (front only) requiring a pit depth of 2000 mm (front only).Single axle load capacity: 60 kN Dynamic load, 90 kN Static load.Colour: Blue RAL 5010.Buffers:500 x 250 x 90 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.500 x 250 x 140 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate.EBF Floating buffers, 500 x 250 x 90 mm deep (overall projection 160 mm) allowing movement of 150 mm up or down. Traffic lights:11 watt - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with 11 watt long life bulbs. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.LED - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with LED’s. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.Mimic lights - 120 mm dia red/green high visible internal mimic lights.Hafa Eye automatic vehicle sensor and red/amber/green traffic lights.Other requirements:Antislip/ anti noise surface to platform and lip.Cross traffic interlock.Dock light - Crawford Quality Assured A 24V/ 70W dock light - the 70W halogen lamps mounted on a moveable arm are dust and waterproof with the whole system being easily and economically mounted just inside the loading bay door to provide light in every corner. Overall length 1070 mm with length of moveable section being 670 mm.EPDM seals to pit edges.Galvanizing of all steel components.Non-standard paint finish.Photo cell interlock for use with manual doors. Wheel guides - Crawford Quality Assured Tubular steel, diameter 140 mm, hot dip galvanized. The guides are supplied for casting into the concrete by others. Length: 2000 mm. Above ground: 300 mm.

An electric hydraulic telescopic lip dock leveller door designed to accommodate a large variance in vehicle heights, i.e. lightweight vans to containers.

Incorporates:

  • Twin hydraulic cylinders with emergency stop valves to guarantee the leveller will function in any operating position and ensure maximum platform stability.
  • Emergency on/ off switch to ensure the leveller is automatically locked in position if there is a power failure or if the emergency switch is turned off.
  • A reset function which prevents movement of the leveller when an interrupted power supply is restored. The leveller is reactivated by tipping the ‘Raise’ button.
  • 4 mm thick black and yellow striped toe guards on both sides of the leveller which give protection when the leveller is above dock level.
  • 6-8 mm thick tear-plate platform surface to prevent slipping.
  • The single axle load capacity is calculated as two 150 x 150 mm contact areas at 1 metre lateral centre distance.
  • EN 1398 stipulates the maximum gradient of a dock leveller during loading must not exceed 12.5% (1 in 8).
  • Inspection stay is supplied as standard.
  • 100 mm side tilt.
  • 500 mm long, steel telescopic lip profiled to help prevent ‘grounding out’ of material handling equipment and a 40 mm chamfer to the leading edge. Central 1000 mm wide section of the lip to be independently operated ensuring a maximum load of only 20 kN is imposed, for use with lightweight vehicles.
  • Rack and pinion gearing to ensure smooth and accurate operation of the lip.
  • CE marked with manufactures declaration of conformity.
  • Combidock control panel, incorporating:
  • Up/down operation, lip extend and ‘town mode’ button ensuring only the central 1000 mm section of the lip extends for use with lightweight vehicles.
  • Electric interlock between door and leveller.
  • Automatic operation of traffic lights and dock lights (where required).

More about Crawford DL6030C Combidock:
As standard - Options - Further information.

PendingLOADING BAY DOCK LEVELLER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford Combidock Dock Leveller.
 Platform size:
[2250 x 5700 mm].
 Buffers:
[500 x 250 x 90 mm thick heavy duty rubber,mounted on a 15 mm thick steel back plate].
[500 x 250 x 140 mm thick heavy duty rubber,mounted on a 15 mm thick steel back plate].
[TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate].
 Traffic lights:
[11 watt Twin head, red over green 145 mm traffic lights].
[Hafa Eye automatic vehicle sensor and red/amber/green traffic lights].
[LED Twin head, red over green 145 mm traffic lights].
 Other requirements:
[Antislip/ anti noise surface to platform and lip].
[Cross traffic interlock].
[Dock light, 24V/ 70W].


top ^

Guidance

for Crawford DL6030C Combidock

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6030C Combidock: As standard - Options - Further information.

As standard

Type:

T frame complete with height adjusting screws and casting tags – for use with pre cast concrete pits.

Platform configuration:

  • Width: 2250 mm.
  • Length: 5700 mm.
  • Gradient length: 4400 mm.
  • Front 1300 mm of platform to operate horizontally and be supported by 2 hydraulic support legs.
  • Maximum operating height above dock 450 mm.
  • Minimum operating height below dock 850 mm.
  • Based upon a leveller height of 1960 mm (front only) requiring a pit depth of 2000 mm (front only).

Single axle load capacity:

60 kN Dynamic load, 90 kN Static load.

Colour:

Blue RAL 5010.

Options

Buffers:

  • 500 x 250 x 90 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.
  • 500 x 250 x 140 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.
  • TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate.
  • EBF Floating buffers, 500 x 250 x 90 mm deep (overall projection 160 mm) allowing movement of 150 mm up or down.

Traffic lights:

  • 11 watt - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with 11 watt long life bulbs. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.
  • LED - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with LED’s. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.
  • Mimic lights - 120 mm dia red/green high visible internal mimic lights.
  • Hafa Eye automatic vehicle sensor and red/amber/green traffic lights.

Other requirements:

  • Antislip/ anti noise surface to platform and lip.
  • Cross traffic interlock.
  • Dock light - Crawford Quality Assured A 24V/ 70W dock light - the 70W halogen lamps mounted on a moveable arm are dust and waterproof with the whole system being easily and economically mounted just inside the loading bay door to provide light in every corner. Overall length 1070 mm with length of moveable section being 670 mm.
  • EPDM seals to pit edges.
  • Galvanizing of all steel components.
  • Non-standard paint finish.
  • Photo cell interlock for use with manual doors.
  • Wheel guides - Crawford Quality Assured Tubular steel, diameter 140 mm, hot dip galvanized. The guides are supplied for casting into the concrete by others. Length: 2000 mm. Above ground: 300 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

View larger image of Crawford 624 Isodock Dock Leveller from ASSA ABLOY Entrance Systems Ltd - IndustrialCrawford DL6020TI Isodock Dock Leveller

An electric hydraulic telescopic lip dock leveller for temperature controlled areas, e.g. chill/ freezer warehouses.Incorporates:Twin hydraulic cylinders with emergency stop valves to guarantee the leveller will function in any operating position and ensure maximum platform stability.Emergency on/ off switch to ensure the leveller is automatically locked in position if there is a power failure or if the emergency switch is turned off.A reset function which prevents movement of the leveller when an interrupted power supply is restored. The leveller is reactivated by tipping the ‘Raise’ button.4 mm thick black and yellow striped toe guards on both sides of the leveller which give protection when the leveller is above dock level.6-8 mm thick tear-plate platform surface to prevent slipping.The single axle load capacity is calculated as two 150 x 150 mm contact areas at 1 metre lateral centre distance.EN 1398 stipulates the maximum gradient of a dock leveller during loading must not exceed 12.5% (1 in 8).Inspection stay is supplied as standard.100 mm side tilt.1000 mm long,13 mm thick steel telescopic lip profiled to help prevent ‘grounding out’ of material handling equipment and a 40 mm chamfer to the leading edge.Rack and pinion gearing to ensure smooth and accurate operation of the lip.50 mm thick insulated panels to totally enclose the underside of the leveller, designed in conjunction with a dock door that closes in front of the leveller completing the insulation package.EPDM seals to the pit edges. CE marked with manufactures declaration of conformity.Supervision i305 Combination control panel, incorporating:-Leveller and door operation, integrated infra red interface, service interval indicator, hafa memory, on board diagnostics, auto button, 3 digit display, BUS interface for networking. Electric interlock between door and leveller.Automatic operation of traffic lights and dock lights (where required).Type: T frame complete with height adjusting screws and casting tangs – for use with pre cast concrete pits. Single axle load capacity: 60 kN Dynamic load, 90 kN Static load.Colour: Blue RAL 5010.Traffic lights:11 watt - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with 11 watt long life bulbs. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.LED - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with LED’s. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.Mimic lights - 120 mm dia red/green high visible internal mimic lights.Hafa Eye automatic vehicle sensor and red/amber/green traffic lights.Other requirements:125 mm taper to lip edges.125 mm segments to lip edges.100 mm chamfer to leading edge.8-10 mm thick platform.80 kN dynamic single axle load.10 kN dynamic single axle load.Air Bag controls within combination control panel.Aluminium , low profile lip, to provide smoother run off.Antislip/ anti noise surface to platform and lip.Cross traffic interlock.Galvanizing of all steel components.Low temperature oil.Non standard paint finish.Photo cell interlock for use with manual doors.Wheel guides - Crawford Quality Assured Tubular steel, diameter 140 mm, hot dip galvanised. The guides are supplied for casting into the concrete by others. Length: 2000 mm. Above ground: 300 mm. Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=02175&f=COL1502175.pdf&pg=

An electric hydraulic telescopic lip dock leveller for temperature controlled areas, e.g. chill/ freezer warehouses.

Incorporates:

  • Twin hydraulic cylinders with emergency stop valves to guarantee the leveller will function in any operating position and ensure maximum platform stability.
  • Emergency on/ off switch to ensure the leveller is automatically locked in position if there is a power failure or if the emergency switch is turned off.
  • A reset function which prevents movement of the leveller when an interrupted power supply is restored. The leveller is reactivated by tipping the ‘Raise’ button.
  • 4 mm thick black and yellow striped toe guards on both sides of the leveller which give protection when the leveller is above dock level.
  • 6-8 mm thick tear-plate platform surface to prevent slipping.
  • The single axle load capacity is calculated as two 150 x 150 mm contact areas at 1 metre lateral centre distance.
  • EN 1398 stipulates the maximum gradient of a dock leveller during loading must not exceed 12.5% (1 in 8).
  • Inspection stay is supplied as standard.
  • 100 mm side tilt.
  • 1000 mm long,13 mm thick steel telescopic lip profiled to help prevent ‘grounding out’ of material handling equipment and a 40 mm chamfer to the leading edge.
  • Rack and pinion gearing to ensure smooth and accurate operation of the lip.
  • 50 mm thick insulated panels to totally enclose the underside of the leveller, designed in conjunction with a dock door that closes in front of the leveller completing the insulation package.
  • EPDM seals to the pit edges.
  • CE marked with manufactures declaration of conformity.
  • Supervision i305 Combination control panel, incorporating:-
  • Leveller and door operation, integrated infra red interface, service interval indicator, hafa memory, on board diagnostics, auto button, 3 digit display, BUS interface for networking.
  • Electric interlock between door and leveller.
  • Automatic operation of traffic lights and dock lights (where required).

More about Crawford DL6020TI Isodock Dock Leveller:
As standard - Options - Further information.

PendingLOADING BAY DOCK LEVELLER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DL6020TI Isodock Dock Leveller.
 Platform size:
  -Width:
[2000 mm].
[2200 mm].
[2400 mm].
  -Length:
[2000 mm].
[2500 mm].
[3000 mm].
 Gradient length:
[Platform length +860 mm].
[Maximum operating height above and below dock height (based upon a 830 mm deep leveller and a 1000 mm long lip):].
[2000 mm platform length, + 380 mm, - 460 mm].
 Buffers:
[500 x 250 x 90 mm thick heavy duty rubber,mounted on a 15 thick steel back plate].
[500 x 250 x 140 mm thick heavy duty rubber,mounted on a 15 thick steel back plate].
[TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate].
 Other requirements:
[125 mm taper to lip edges].
[125 mm segments to lip edges].
[100 mm chamfer to leading edge].


top ^

Guidance

for Crawford DL6020TI Isodock Dock Leveller

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6020TI Isodock Dock Leveller: As standard - Options - Further information.

As standard

Type:

T frame complete with height adjusting screws and casting tangs – for use with pre cast concrete pits.

Single axle load capacity:

60 kN Dynamic load, 90 kN Static load.

Colour:

Blue RAL 5010.

Options

Traffic lights:

  • 11 watt - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with 11 watt long life bulbs. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.
  • LED - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with LED’s. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.
  • Mimic lights - 120 mm dia red/green high visible internal mimic lights.
  • Hafa Eye automatic vehicle sensor and red/amber/green traffic lights.

Other requirements:

  • 125 mm taper to lip edges.
  • 125 mm segments to lip edges.
  • 100 mm chamfer to leading edge.
  • 8-10 mm thick platform.
  • 80 kN dynamic single axle load.
  • 10 kN dynamic single axle load.
  • Air Bag controls within combination control panel.
  • Aluminium , low profile lip, to provide smoother run off.
  • Antislip/ anti noise surface to platform and lip.
  • Cross traffic interlock.
  • Galvanizing of all steel components.
  • Low temperature oil.
  • Non standard paint finish.
  • Photo cell interlock for use with manual doors.
  • Wheel guides - Crawford Quality Assured Tubular steel, diameter 140 mm, hot dip galvanised. The guides are supplied for casting into the concrete by others. Length: 2000 mm. Above ground: 300 mm.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

View larger image of Crawford 6010S Swingdock Swing Lip Leveller from ASSA ABLOY Entrance Systems Ltd - IndustrialCrawford DL6010S Swingdock Swing Lip Leveller

An electric hydraulic swing lip dock leveller door designed for loading bays in warehouses and distribution centres.Incorporates:Twin hydraulic cylinders with emergency stop valves to guarantee the leveller will function in any operating position and ensure maximum platform stability.Emergency on/ off switch to ensure the leveller is automatically locked in position if there is a power failure or if the emergency switch is turned off.A reset function which prevents movement of the leveller when an interrupted power supply is restored. The leveller is reactivated by tipping the ‘Raise’ button.4 mm thick black and yellow striped toe guards on both sides of the leveller which give protection when the leveller is above dock level.6-8 mm thick tear-plate platform surface to prevent slipping.The single axle load capacity is calculated as two 150 x 150 mm contact areas at 1 metre lateral centre distance.EN 1398 stipulates the maximum gradient of a dock leveller during loading must not exceed 12.5% (1 in 8).Inspection stay is supplied as standard.100 mm side tilt.400 mm long, 13 mm thick steel swing lip profiled to help prevent ‘grounding out’ of material handling equipment and a 40 mm chamfer to the leading edge.CE marked with manufactures declaration of conformity.Supervision i305 Combination control panel, incorporating:-Leveller and door operation.Integrated infra red interface.Service interval indicator.Hafa memory.On board diagnostics.Auto button.3 digit display.BUS interface for networking.Electric interlock between door and leveller.The door has an electric opening and closing system with a soft start and stop function, which prolongs the life of the door. The door can have a battery back-up added as well as a range of automatic opening options, depending on the level of access required. In addition, the door withstands high wind loads, which makes it suitable for outside as well as inside use.Single axle load capacity: 60 kN dynamic load, 90 kN static load.Colour: Blue RAL 5010.Buffers:500 x 250 x 90 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.500 x 250 x 140 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate.EBF Floating buffers, 500 x 250 x 90 mm deep (overall projection 160 mm) allowing movement of 150 mm up or down. Traffic lights:11 watt - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with 11 watt long life bulbs. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.LED - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with LED’s. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.Mimic lights - 120 mm dia red/green high visible internal mimic lights.Hafa Eye automatic vehicle sensor and red/amber/green traffic lights.Other requirements:80 Kn dynamic single axle load.100 Kn dynamic single axle load.40 thick polyurethane insulation to underside of the platform.8/10 mm thick platform.500 mm long lip.125 mm taper to lip edges.125 mm segments to lip edges.100 mm chamfer to leading edge.Cross traffic interlock.Dock light - Crawford Quality Assured A 24v / 70w dock light - The 70w halogen lamps mounted on a moveable arm are dust and waterproof with the whole system being easily and economically mounted just inside the loading bay door to provide light in every corner. Overall length 1070 mm with length of moveable section being 670 mm.EPDM seals to pit edges.Antislip/anti noise surface to platform and lip.Galvanizing of all steel components.Non standard paint finish.Photo cell interlock for use with manual doors.Wheel guides - Crawford Quality Assured Tubular steel, diameter 140 mm, hot dip galvanized. The guides are supplied for casting into the concrete by others. Length: 2000 mm. Above ground: 300 mm. Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=02175&f=COL1302175.pdf&pg=

An electric hydraulic swing lip dock leveller door designed for loading bays in warehouses and distribution centres.

Incorporates:

  • Twin hydraulic cylinders with emergency stop valves to guarantee the leveller will function in any operating position and ensure maximum platform stability.
  • Emergency on/ off switch to ensure the leveller is automatically locked in position if there is a power failure or if the emergency switch is turned off.
  • A reset function which prevents movement of the leveller when an interrupted power supply is restored. The leveller is reactivated by tipping the ‘Raise’ button.
  • 4 mm thick black and yellow striped toe guards on both sides of the leveller which give protection when the leveller is above dock level.
  • 6-8 mm thick tear-plate platform surface to prevent slipping.
  • The single axle load capacity is calculated as two 150 x 150 mm contact areas at 1 metre lateral centre distance.
  • EN 1398 stipulates the maximum gradient of a dock leveller during loading must not exceed 12.5% (1 in 8).
  • Inspection stay is supplied as standard.
  • 100 mm side tilt.
  • 400 mm long, 13 mm thick steel swing lip profiled to help prevent ‘grounding out’ of material handling equipment and a 40 mm chamfer to the leading edge.
  • CE marked with manufactures declaration of conformity.
  • Supervision i305 Combination control panel, incorporating:-
  • Leveller and door operation.
  • Integrated infra red interface.
  • Service interval indicator.
  • Hafa memory.
  • On board diagnostics.
  • Auto button.
  • 3 digit display.
  • BUS interface for networking.
  • Electric interlock between door and leveller.

The door has an electric opening and closing system with a soft start and stop function, which prolongs the life of the door. The door can have a battery back-up added as well as a range of automatic opening options, depending on the level of access required. In addition, the door withstands high wind loads, which makes it suitable for outside as well as inside use.

More about Crawford DL6010S Swingdock Swing Lip Leveller:
As standard - Options - Further information.

PendingLOADING BAY DOCK LEVELLER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Swingdock Dock Leveller.
 Type:
[Box frame]. - to allow the leveller to be cast into the floor.
[F frame]. - for use with pits incorporating pit edge angles.
[T frame complete with height adjusting screws and casting tangs]. - for use with pre cast concrete pits).
 Platform size:
  -Width:
[1750 mm].
[2000 mm].
[2200 mm].
  -Length:
[1750 mm].
[2000 mm].
[2500 mm].
 Gradient length:
[Platform length +190 mm].
[Maximum operating height above and below dock height (based upon a 700 deep leveller and a 400 long lip):].
[1750 mm platform length,+ 250 mm, - 320 mm].
 Buffers:
[500 x 250 x 90 mm thick heavy duty rubber, mounted on a 15 thick steel back plate].
[500 x 250 x 140 mm thick heavy duty rubber, mounted on a 15 thick steel back plate].
[TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate].
 Traffic lights:
[11 watt Twin head, red over green 145 mm traffic lights].
[Hafa Eye automatic vehicle sensor and red/amber/green traffic lights].
[LED Twin head, red over green 145 mm traffic lights].
 Other requirements:
[80 kN dynamic single axle load].
[100 kN dynamic single axle load].
[40 thick polyurethane insulation to underside of the platform].


top ^

Guidance

for Crawford DL6010S Swingdock Swing Lip Leveller

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6010S Swingdock Swing Lip Leveller: As standard - Options - Further information.

As standard

Single axle load capacity:

60 kN dynamic load, 90 kN static load.

Colour:

Blue RAL 5010.

Options

Buffers:

  • 500 x 250 x 90 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.
  • 500 x 250 x 140 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.
  • TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate.
  • EBF Floating buffers, 500 x 250 x 90 mm deep (overall projection 160 mm) allowing movement of 150 mm up or down.

Traffic lights:

  • 11 watt - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with 11 watt long life bulbs. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.
  • LED - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with LED’s. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.
  • Mimic lights - 120 mm dia red/green high visible internal mimic lights.
  • Hafa Eye automatic vehicle sensor and red/amber/green traffic lights.

Other requirements:

  • 80 Kn dynamic single axle load.
  • 100 Kn dynamic single axle load.
  • 40 thick polyurethane insulation to underside of the platform.
  • 8/10 mm thick platform.
  • 500 mm long lip.
  • 125 mm taper to lip edges.
  • 125 mm segments to lip edges.
  • 100 mm chamfer to leading edge.
  • Cross traffic interlock.
  • Dock light - Crawford Quality Assured A 24v / 70w dock light - The 70w halogen lamps mounted on a moveable arm are dust and waterproof with the whole system being easily and economically mounted just inside the loading bay door to provide light in every corner. Overall length 1070 mm with length of moveable section being 670 mm.
  • EPDM seals to pit edges.
  • Antislip/anti noise surface to platform and lip.
  • Galvanizing of all steel components.
  • Non standard paint finish.
  • Photo cell interlock for use with manual doors.
  • Wheel guides - Crawford Quality Assured Tubular steel, diameter 140 mm, hot dip galvanized. The guides are supplied for casting into the concrete by others. Length: 2000 mm. Above ground: 300 mm.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

View larger image of Crawford 620 Teledock Telescopic Lip Leveller from ASSA ABLOY Entrance Systems Ltd - IndustrialCrawford DL6020T Teledock Telescopic Lip Leveller

An electric hydraulic telescopic lip dock leveller designed for loading bays in warehouses and distribution centres.Incorporating:Twin hydraulic cylinders with emergency stop valves to guarantee the leveller will function in any operating position and ensure maximum platform stability.Emergency on / off switch to ensure the leveller is automatically locked in position if there is a power failure or if the emergency switch is turned off.A reset function which prevents movement of the leveller when an interrupted power supply is restored. The leveller is reactivated by tipping the ‘Raise’ button.4 mm thick black and yellow striped toe guards on both sides of the leveller which give protection when the leveller is above dock level.6-8 mm thick tear-plate platform surface to prevent slipping.The single axle load capacity is calculated as two 150 x 150 mm contact areas at 1 metre lateral centre distance.EN 1398 stipulates the maximum gradient of a dock leveller during loading must not exceed 12.5% (1 in 8).Inspection stay is supplied as standard.100 mm side tilt.500 mm long, 13 mm thick steel telescopic lip profiled to help prevent ‘grounding out’ of material handling equipment and a 40 mm chamfer to the leading edge.Rack and pinion gearing to ensure smooth and accurate operation of the lip. CE marked with manufactures declaration of conformity.Supervision i305 Combination control panel, incorporating:-Leveller and door operation.Integrated infra red interface.Service interval indicator.Hafa memory.On board diagnostics.Auto button.3 digit display.BUS interface for networking.Electric interlock between door and leveller.Single axle load capacity: 60 kN dynamic load, 90 kN static load.Colour: Blue RAL 5010.Buffers:500 x 250 x 90 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.500 x 250 x 140 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate.EBF Floating buffers, 500 x 250 x 90 mm deep (overall projection 160 mm) allowing movement of 150 mm up or down. Traffic lights:11 watt - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with 11 watt long life bulbs. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.LED - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with LED’s. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.Mimic lights - 120 mm dia red/green high visible internal mimic lights.Hafa Eye automatic vehicle sensor and red/amber/green traffic lights.Other requirements:80 Kn dynamic single axle load.100 Kn dynamic single axle load.40 thick polyurethane insulation to underside of the platform.8/10 mm thick platform.500 mm long lip.125 mm taper to lip edges.125 mm segments to lip edges.100 mm chamfer to leading edge.Cross traffic interlock.Dock light - Crawford Quality Assured A 24v / 70w dock light - The 70w halogen lamps mounted on a moveable arm are dust and waterproof with the whole system being easily and economically mounted just inside the loading bay door to provide light in every corner. Overall length 1070 mm with length of moveable section being 670 mm.EPDM seals to pit edges.Antislip/anti noise surface to platform and lip.Galvanizing of all steel components.Non standard paint finish.Photo cell interlock for use with manual doors.Wheel guides - Crawford Quality Assured Tubular steel, diameter 140 mm, hot dip galvanized. The guides are supplied for casting into the concrete by others. Length: 2000 mm. Above ground: 300 mm.

An electric hydraulic telescopic lip dock leveller designed for loading bays in warehouses and distribution centres.

Incorporating:

  • Twin hydraulic cylinders with emergency stop valves to guarantee the leveller will function in any operating position and ensure maximum platform stability.
  • Emergency on / off switch to ensure the leveller is automatically locked in position if there is a power failure or if the emergency switch is turned off.
  • A reset function which prevents movement of the leveller when an interrupted power supply is restored. The leveller is reactivated by tipping the ‘Raise’ button.
  • 4 mm thick black and yellow striped toe guards on both sides of the leveller which give protection when the leveller is above dock level.
  • 6-8 mm thick tear-plate platform surface to prevent slipping.
  • The single axle load capacity is calculated as two 150 x 150 mm contact areas at 1 metre lateral centre distance.
  • EN 1398 stipulates the maximum gradient of a dock leveller during loading must not exceed 12.5% (1 in 8).
  • Inspection stay is supplied as standard.
  • 100 mm side tilt.
  • 500 mm long, 13 mm thick steel telescopic lip profiled to help prevent ‘grounding out’ of material handling equipment and a 40 mm chamfer to the leading edge.
  • Rack and pinion gearing to ensure smooth and accurate operation of the lip.
  • CE marked with manufactures declaration of conformity.
  • Supervision i305 Combination control panel, incorporating:-
  • Leveller and door operation.
  • Integrated infra red interface.
  • Service interval indicator.
  • Hafa memory.
  • On board diagnostics.
  • Auto button.
  • 3 digit display.
  • BUS interface for networking.
  • Electric interlock between door and leveller.

More about Crawford DL6020T Teledock Telescopic Lip Leveller:
As standard - Options - Further information.

PendingLOADING BAY DOCK LEVELLER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DL6020T Teledock Dock Leveller.
 Type:
[Box frame]. - to allow the leveller to be cast into the floor.
[F frame]. - for use with pits incorporating pit edge angles.
[T frame complete with height adjusting screws and casting tangs]. - for use with pre cast concrete pits).
 Platform size:
  -Width:
[1750 mm].
[2000 mm].
[2200 mm].
  -Length:
[1750 mm].
[2000 mm].
[2500 mm].
 Gradient length:
[Platform length +140 mm].
[Maximum operating height above and below dock height (based upon a 700 mm deep leveller and a 500 mm long lip):].
[2000 mm platform length, + 310 mm, - 400 mm].
 Buffers:
[500 x 250 x 90 mm thick heavy duty rubber, mounted on a 15 thick steel back plate].
[500 x 250 x 140 mm thick heavy duty rubber, mounted on a 15 thick steel back plate].
[TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate].
 Traffic lights:
[11 watt Twin head, red over green 145 mm traffic lights].
[Hafa Eye automatic vehicle sensor and red/amber/green traffic lights].
[LED Twin head, red over green 145 mm traffic lights].
 Other requirements:
[80 kN dynamic single axle load].
[100 kN dynamic single axle load].
[40 thick polyurethane insulation to underside of the platform].


top ^

Guidance

for Crawford DL6020T Teledock Telescopic Lip Leveller

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6020T Teledock Telescopic Lip Leveller: As standard - Options - Further information.

As standard

Single axle load capacity:

60 kN dynamic load, 90 kN static load.

Colour:

Blue RAL 5010.

Options

Buffers:

  • 500 x 250 x 90 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.
  • 500 x 250 x 140 mm thick heavy duty rubber, mounted on a 15 mm thick steel back plate.
  • TWB-1018/4/N-12 Polyethelene fronted rubber buffers supplied with steel back plate.
  • EBF Floating buffers, 500 x 250 x 90 mm deep (overall projection 160 mm) allowing movement of 150 mm up or down.

Traffic lights:

  • 11 watt - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with 11 watt long life bulbs. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.
  • LED - Crawford Quality Assured Twin head, red over green 145 mm traffic lights with LED’s. Traffic lights interlocked with the doors so that they show green when the door is closed and red when the door is open.
  • Mimic lights - 120 mm dia red/green high visible internal mimic lights.
  • Hafa Eye automatic vehicle sensor and red/amber/green traffic lights.

Other requirements:

  • 80 Kn dynamic single axle load.
  • 100 Kn dynamic single axle load.
  • 40 thick polyurethane insulation to underside of the platform.
  • 8/10 mm thick platform.
  • 500 mm long lip.
  • 125 mm taper to lip edges.
  • 125 mm segments to lip edges.
  • 100 mm chamfer to leading edge.
  • Cross traffic interlock.
  • Dock light - Crawford Quality Assured A 24v / 70w dock light - The 70w halogen lamps mounted on a moveable arm are dust and waterproof with the whole system being easily and economically mounted just inside the loading bay door to provide light in every corner. Overall length 1070 mm with length of moveable section being 670 mm.
  • EPDM seals to pit edges.
  • Antislip/anti noise surface to platform and lip.
  • Galvanizing of all steel components.
  • Non standard paint finish.
  • Photo cell interlock for use with manual doors.
  • Wheel guides - Crawford Quality Assured Tubular steel, diameter 140 mm, hot dip galvanized. The guides are supplied for casting into the concrete by others. Length: 2000 mm. Above ground: 300 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

Crawford DL6020TA Teledock Autodock Leveller

The Crawford DL6020TA Autodock Teledock is an externally installed and self-supporting dock leveller that is ideal for applications where there are insufficient installation possibilities within the building. This model is equipped with a telescopic lip system. The Crawford 621 autodock teledock system meets the standard demands of most loading operations and fully complies with rules and regulations of the European Standard EN 1398.The operation of the Crawford DL6020TA Autodock Teledock is based on an electro-hydraulic telescopic lip, controlled by a semi-automatic control unit. When the dock leveller is raised, the lip extends and the leveller lowers gently onto the lorry bed. After loading or unloading, the leveller is raised again, the lip retracts and the platform returns to its parking position, i.e. to ramp level.Platform tear plate thickness:8 mm. Vertical working range:Above dock: 0–520 mm.Below dock: 0–470 mm.Hydraulic equipment:Low noise hydraulic unit.Two hydraulic lift cylinders.One hydraulic lip cylinder.Control unit:Leveller control.Door control.Shelter control.Fault and service indicator.Performance:Load capacity: 6 tonnes (60 kN).Maximum point load: 6.5 N/mm².Motor hydraulic unit: 1.1 kW.Mains supply: 400 V 3-phase, 230 V 3-phase.Control unit protection class: IP 54.Magnetic valves: 24V/DC 18 W S1.Paint classes:If the dock leveller is to be used in a rural area, the standard finish is:Paint class 1; 80 µm factory painted for corrosive category C2 M.If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.Paint class 3; 160 µm factory painted for corrosive category C3 M.To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.Buffers:Consult manufacturer's literature for further information.Installation angles:45°/ 135°.60°/ 120°.75°/ 105°.

The Crawford DL6020TA Autodock Teledock is an externally installed and self-supporting dock leveller that is ideal for applications where there are insufficient installation possibilities within the building. This model is equipped with a telescopic lip system. The Crawford 621 autodock teledock system meets the standard demands of most loading operations and fully complies with rules and regulations of the European Standard EN 1398.

The operation of the Crawford DL6020TA Autodock Teledock is based on an electro-hydraulic telescopic lip, controlled by a semi-automatic control unit. When the dock leveller is raised, the lip extends and the leveller lowers gently onto the lorry bed. After loading or unloading, the leveller is raised again, the lip retracts and the platform returns to its parking position, i.e. to ramp level.

More about Crawford DL6020TA Teledock Autodock Leveller:
As standard - Options - Further information.

PendingDOCK LEVELLER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DL6020TA Teledock Autodock Leveller.
 Size:
  -Length:
[2000 mm].
[2450 mm].
[3000 mm].
  -Width:
[3300 mm].
[3500 mm].
[3600 mm].
  -Leveller width:
[2000 mm].
[2200 mm].
 Surface treatment:
[Hot dip galvanized].
[Painted, RAL 3002].
[Painted, RAL 5010 ]. - As standard.
 Lip type:
[Standard, 500 mm].
[Standard, 1000 mm ].
[Aluminium].
 Slip protection/ noise reduction coating:
[Not required].
[Required ].
 Oil requirements:
[Bio hydraulic oil]. - -20°C to + 60°C.
[Low temperature hydraulic oil]. - -30°C to +60°C
[Standard oil]. - -20°C to +60°C.
 Buffers:
[Not required].
[EBF].
[RB].
 Accessories:
[RS].
[Crawford Eye].
[Dock light].


top ^

Guidance

for Crawford DL6020TA Teledock Autodock Leveller

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6020TA Teledock Autodock Leveller: As standard - Options - Further information.

As standard

Platform tear plate thickness:

8 mm.

Vertical working range:

  • Above dock: 0–520 mm.
  • Below dock: 0–470 mm.

Hydraulic equipment:

  • Low noise hydraulic unit.
  • Two hydraulic lift cylinders.
  • One hydraulic lip cylinder.

Control unit:

  • Leveller control.
  • Door control.
  • Shelter control.
  • Fault and service indicator.

Options

Performance:

  • Load capacity: 6 tonnes (60 kN).
  • Maximum point load: 6.5 N/mm².
  • Motor hydraulic unit: 1.1 kW.
  • Mains supply: 400 V 3-phase, 230 V 3-phase.
  • Control unit protection class: IP 54.
  • Magnetic valves: 24V/DC 18 W S1.

Paint classes:

If the dock leveller is to be used in a rural area, the standard finish is:

  • Paint class 1; 80 µm factory painted for corrosive category C2 M.

If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.

  • Paint class 3; 160 µm factory painted for corrosive category C3 M.

To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.

Buffers:

Consult manufacturer's literature for further information.

Installation angles:

  • 45°/ 135°.
  • 60°/ 120°.
  • 75°/ 105°.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

Crawford DL6021T Heavy Duty Teledock

The Crawford DL6021T teledock 100 kN is the optimal efficiency solution in general industry and logistics applications. The telescopic lip precisely bridges the gap between the ramp and the lorry bed. The Crawford DL6021T teledock 100 kN system meets the standard demands of most loading operations and fully complies with rules and regulations of the European Standard EN 1398. Operation is based on an electro-hydraulic telescopic lip, controlled by a semi-automatic control unit. When the dock leveller is raised, the lip extends and the leveller lowers gently onto the lorry bed. After loading or unloading, the leveller is raised again, the lip retracts and the platform returns to its parking position, i.e. to ramp level.Platform tear plate thickness:10 mm. Vertical working range:Above dock: 0–500 mm.Below dock: 0–400 mm.Hydraulic equipment:Low noise hydraulic unit.Two hydraulic lift cylinders.One hydraulic lip cylinder.Control unit:Leveller control.Door control.Shelter control.Fault and service indicator.Performance:Load capacity: 10 tonnes (100 kN).Maximum point load: 6.5 N/mm².Motor hydraulic unit: 1.5 kW.Mains supply: 400 V 3-phase, 230 V 3-phase.Control unit protection class: IP 54.Magnetic valves: 24V/DC 18 W S1.Paint classes:If the dock leveller is to be used in a rural area, the standard finish is:Paint class 1; 80 µm factory painted for corrosive category C2 M.If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.Paint class 3; 160 µm factory painted for corrosive category C3 M.To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.Buffers:Consult manufacturer's literature for further information.

The Crawford DL6021T teledock 100 kN is the optimal efficiency solution in general industry and logistics applications. The telescopic lip precisely bridges the gap between the ramp and the lorry bed. The Crawford DL6021T teledock 100 kN system meets the standard demands of most loading operations and fully complies with rules and regulations of the European Standard EN 1398.

Operation is based on an electro-hydraulic telescopic lip, controlled by a semi-automatic control unit. When the dock leveller is raised, the lip extends and the leveller lowers gently onto the lorry bed. After loading or unloading, the leveller is raised again, the lip retracts and the platform returns to its parking position, i.e. to ramp level.

More about Crawford DL6021T Heavy Duty Teledock:
As standard - Options - Further information.

PendingDOCK LEVELLER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DL6021T Heavy Duty Teledock.
 Frame:
[P-frame]. - Pit frame.
[W-frame]. - Frame for welding.
 Size:
  -Length:
[2000 mm].
[2500 mm].
[3000 mm].
  -Width:
[2000 mm].
[2200 mm].
 Surface treatment:
[Hot dip galvanized].
[Painted, RAL 3002].
[Painted, RAL 5010 ]. - As standard.
 Lip type:
[Standard, 500 mm].
[Tapered].
 Slip protection/ noise reduction coating:
[Not required].
[Required ].
 EPDM seal:
[Not required].
[Required].
 Oil requirements:
[Bio hydraulic oil]. - -20°C to + 60°C.
[Low temperature hydraulic oil]. - -30°C to +60°C
[Standard oil]. - -20°C to +60°C.
 Buffers:
[Not required].
[EBF].
[RB].
 Accessories:
[None].
[Crawford Eye].
[Dock light].


top ^

Guidance

for Crawford DL6021T Heavy Duty Teledock

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6021T Heavy Duty Teledock: As standard - Options - Further information.

As standard

Platform tear plate thickness:

10 mm.

Vertical working range:

  • Above dock: 0–500 mm.
  • Below dock: 0–400 mm.

Hydraulic equipment:

  • Low noise hydraulic unit.
  • Two hydraulic lift cylinders.
  • One hydraulic lip cylinder.

Control unit:

  • Leveller control.
  • Door control.
  • Shelter control.
  • Fault and service indicator.

Options

Performance:

  • Load capacity: 10 tonnes (100 kN).
  • Maximum point load: 6.5 N/mm².
  • Motor hydraulic unit: 1.5 kW.
  • Mains supply: 400 V 3-phase, 230 V 3-phase.
  • Control unit protection class: IP 54.
  • Magnetic valves: 24V/DC 18 W S1.

Paint classes:

If the dock leveller is to be used in a rural area, the standard finish is:

  • Paint class 1; 80 µm factory painted for corrosive category C2 M.

If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.

  • Paint class 3; 160 µm factory painted for corrosive category C3 M.

To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.

Buffers:

Consult manufacturer's literature for further information.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

Crawford DL6020STA Step Autodock T

The Crawford DL6020STA Step Autodock is an externally installed and self-supporting dock leveller that is ideal for applications where there are insufficient installation possibilities within the building. The model is equipped with a telescopic lip system. The telescopic lip precisely bridges the gap between the ramp and the lorry bed. The Crawford DL6020STA is designed to let a truck dock to the ramp with closed tail-gate. Only when the truck is in position should the tail-gate be opened thus ensuring that the temperature chain is not broken. It is also possible to position a closed container in front of the loading bay any time. The loading/ unloading can happen any time afterwards without the need to move the container. The Crawford DL6020STA provides benefits in terms of saving energy, increasing the safety of people/ goods and improving the efficiency of the docking process. The Crawford DL6020STA Step Autodock T system meets the standard demands of most loading operations and fully complies with rules and regulations of the European Standard EN 1398. The operation of the Crawford DL6020STA is based on an electro-hydraulic telescopic lip, controlled by a semi-automatic control unit. When the dock leveller is raised, the lip extends and the leveller lowers gently onto the lorry bed. After loading or unloading, the leveller is raised again, the lip retracts and the platform returns to its parking position, i.e. to ramp level.Length (nominal):2450 mm.Platform tear plate thickness:8 mm.Vertical working range:Above dock: 0–220 mm.Below dock: 0–620 mm.Hydraulic equipment:Low noise hydraulic unit.Two hydraulic lift cylinders.One hydraulic lip cylinder.Control unit:Leveller control.Door control.Shelter control.Fault and service indicator.Performance:Load capacity: 6 tonnes (60 kN).Maximum point load: 6.5 N/mm².Motor hydraulic unit: 1.1 kW.Mains supply: 400 V 3-phase, 230 V 3-phase.Control unit protection class: IP 54.Magnetic valves: 24V/DC 18 W S1.Paint classes:If the dock leveller is to be used in a rural area, the standard finish is:Paint class 1; 80 µm factory painted for corrosive category C2 M.If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.Paint class 3; 160 µm factory painted for corrosive category C3 M.To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.Buffers:Consult manufacturer's literature for further information.

The Crawford DL6020STA Step Autodock is an externally installed and self-supporting dock leveller that is ideal for applications where there are insufficient installation possibilities within the building. The model is equipped with a telescopic lip system. The telescopic lip precisely bridges the gap between the ramp and the lorry bed. The Crawford DL6020STA is designed to let a truck dock to the ramp with closed tail-gate. Only when the truck is in position should the tail-gate be opened thus ensuring that the temperature chain is not broken. It is also possible to position a closed container in front of the loading bay any time. The loading/ unloading can happen any time afterwards without the need to move the container. The Crawford DL6020STA provides benefits in terms of saving energy, increasing the safety of people/ goods and improving the efficiency of the docking process. The Crawford DL6020STA Step Autodock T system meets the standard demands of most loading operations and fully complies with rules and regulations of the European Standard EN 1398.

The operation of the Crawford DL6020STA is based on an electro-hydraulic telescopic lip, controlled by a semi-automatic control unit. When the dock leveller is raised, the lip extends and the leveller lowers gently onto the lorry bed. After loading or unloading, the leveller is raised again, the lip retracts and the platform returns to its parking position, i.e. to ramp level.

More about Crawford DL6020STA Step Autodock T:
As standard - Options - Further information.

PendingDOCK LEVELLER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DL6020STA Step Autodock .
    :
 Width:
[3300 mm].
[3500 mm].
[3600 mm].
 Surface treatment:
[Hot dip galvanized].
[Painted, RAL 3002].
[Painted, RAL 5010 ]. - As standard.
 Lip type:
[Standard, 500 mm].
[Bevelled, 40 mm].
[Bevelled, 100 mm].
 Oil requirements:
[Bio hydraulic oil]. - -20°C to + 60°C.
[Low temperature hydraulic oil]. - -30°C to +60°C
[Standard oil]. - -20°C to +60°C.
 Buffers:
[Not required].
[EBF].
[RB].
 Accessories:
[None].
[Crawford Eye].
[Dock light].


top ^

Guidance

for Crawford DL6020STA Step Autodock T

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6020STA Step Autodock T: As standard - Options - Further information.

As standard

Length (nominal):

2450 mm.

Platform tear plate thickness:

8 mm.

Vertical working range:

  • Above dock: 0–220 mm.
  • Below dock: 0–620 mm.

Hydraulic equipment:

  • Low noise hydraulic unit.
  • Two hydraulic lift cylinders.
  • One hydraulic lip cylinder.

Control unit:

  • Leveller control.
  • Door control.
  • Shelter control.
  • Fault and service indicator.

Options

Performance:

  • Load capacity: 6 tonnes (60 kN).
  • Maximum point load: 6.5 N/mm².
  • Motor hydraulic unit: 1.1 kW.
  • Mains supply: 400 V 3-phase, 230 V 3-phase.
  • Control unit protection class: IP 54.
  • Magnetic valves: 24V/DC 18 W S1.

Paint classes:

If the dock leveller is to be used in a rural area, the standard finish is:

  • Paint class 1; 80 µm factory painted for corrosive category C2 M.

If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.

  • Paint class 3; 160 µm factory painted for corrosive category C3 M.

To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.

Buffers:

Consult manufacturer's literature for further information.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

Crawford DL6010SA Swingdock Autodock Swing Lip Leveller

The Crawford DL6010SA swingdock autodock is an externally installed and self-supporting dock leveller that is ideal for applications where there are insufficient installation possibilities within the building. The system meets the standard demands of most loading operations and fully complies with rules and regulations of the European Standard EN 1398.The swing lip safely bridges the gap between the ramp and the lorry bed. When the dock leveller is raised, the lip swings out and the leveller lowers gently onto the lorry bed. After loading or unloading, the leveller is raised again, the lip swings down and the platform returns to its parking position, i.e. to ramp level.Length:Other sizes available on request - consult manufacturer for details.Hydraulic equipment:Low noise hydraulic unit.Two hydraulic lift cylinders.One hydraulic lip cylinder.Performance:Load capacity: 6 tonnes (60 kN).Motor hydraulic unit: 0.75 kW.Mains supply: 400 V 3-phase, 230 V 3-phase.Control unit protection class: IP 54.Maximum point loads:6 mm tear plate: 1.3 N/ mm².8 mm tear plate: 6.5 N/ mm².Paint classes:If the dock leveller is to be used in a rural area, the standard finish is:Paint class 1; 80 µm factory painted for corrosive category C2 M.If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.Paint class 3; 160 µm factory painted for corrosive category C3 M.To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanised (80 µm) steel parts.Control unit:Leveller control.Door control.Shelter control.Fault and service indicator.Buffers:Consult manufacturer's literature for further information.Installation angles:45°/ 135°.60°/ 120°.75°/ 105°.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=02175&f=COL820426.pdf&pg=

The Crawford DL6010SA swingdock autodock is an externally installed and self-supporting dock leveller that is ideal for applications where there are insufficient installation possibilities within the building. The system meets the standard demands of most loading operations and fully complies with rules and regulations of the European Standard EN 1398.

The swing lip safely bridges the gap between the ramp and the lorry bed. When the dock leveller is raised, the lip swings out and the leveller lowers gently onto the lorry bed. After loading or unloading, the leveller is raised again, the lip swings down and the platform returns to its parking position, i.e. to ramp level.

More about Crawford DL6010SA Swingdock Autodock Swing Lip Leveller:
As standard - Options - Further information.

PendingDOCK LEVELLER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DL6010SA Swingdock Autodock Swing Lip Leveller.
 Size:
  -Length:
[2000 mm].
[2450 mm].
[3000 mm].
  -Width:
[3300 mm]. - 14000 mm maximum. Insert requirements.
[3500 mm].
[3600 mm].
  -Leveller width:
[2000 mm].
[2200 mm].
 Platform tear plate thickness:
[6 mm].
[8 mm].
 Surface treatment:
[Hot dip galvanized].
[Painted, RAL 3002].
[Painted, RAL 5010]. - As standard.
 Lip type:
[Standard, 400 mm].
[Standard, 500 mm ]. - For corrosive or dirty environments, insert requirements.
[Bent].
 Slip protection/ noise reduction coating:
[Not required].
[Required].
 Oil requirements:
[Bio hydraulic oil]. - -20°C to + 60°C.
[Low temperature hydraulic oil ]. - -30°C to +60°C
[Standard oil]. - -20°C to +60°C.
 Buffers:
[Not required].
[EBF].
[RB].
 Accessories:
[None].
[Crawford Eye].
[Dock light].


top ^

Guidance

for Crawford DL6010SA Swingdock Autodock Swing Lip Leveller

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6010SA Swingdock Autodock Swing Lip Leveller: As standard - Options - Further information.

As standard

Length:

Other sizes available on request - consult manufacturer for details.

Hydraulic equipment:

  • Low noise hydraulic unit.
  • Two hydraulic lift cylinders.
  • One hydraulic lip cylinder.

Options

Performance:

  • Load capacity: 6 tonnes (60 kN).
  • Motor hydraulic unit: 0.75 kW.
  • Mains supply: 400 V 3-phase, 230 V 3-phase.
  • Control unit protection class: IP 54.

Maximum point loads:

  • 6 mm tear plate: 1.3 N/ mm².
  • 8 mm tear plate: 6.5 N/ mm².

Paint classes:

If the dock leveller is to be used in a rural area, the standard finish is:

  • Paint class 1; 80 µm factory painted for corrosive category C2 M.

If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.

  • Paint class 3; 160 µm factory painted for corrosive category C3 M.

To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanised (80 µm) steel parts.

Control unit:

  • Leveller control.
  • Door control.
  • Shelter control.
  • Fault and service indicator.

Buffers:

Consult manufacturer's literature for further information.

Installation angles:

  • 45°/ 135°.
  • 60°/ 120°.
  • 75°/ 105°.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

Crawford DL6010SM Swingdock Minidock Leveller

The Crawford DL6010SM Minidock is a full docking system developed for a limited working range, the ideal solution for a standardized fleet of vehicles. It is available as ramp model as well as pit model. The advantage of the ramp model is the quick installation which also can be provided as an add-on to existing ramps. The operation of the Crawford DL6010SM Minidock is mechanical and is supported by a gas spring. Only one person is needed to lift the platform, swing out, and put the lip on the vehicle bed in one movement. The Crawford DL6010SM Minidock solution adopts a free-floating position - the platform follows the vehicle's movements up and down during loading and unloading. The dock leveller meets all requirements of European Directive EN 1398.The swing lip safely bridges the gap between the ramp and the lorry bed. By manually pulling the rod, the dock leveller is raised and the lip swings out. Then the leveller can be lowered gently onto the lorry bed. After loading or unloading, pulling the rod raises the leveller again, the lip swings down and the platform returns to its parking position, i.e. to ramp level.Length (nominal):700 mm.Vertical working range: Above dock: 0–100 mm.Below dock: 0–100 mm.Lip material: Steel.Load capacity: 4 tonnes (40 kN); 6 tonnes (60 kN) for 2000 and 2200 mm widths.Paint classes:If the dock leveller is to be used in a rural area, the standard finish is:Paint class 1; 80 µm factory painted for corrosive category C2 M.If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.Paint class 3; 160 µm factory painted for corrosive category C3 M.To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.Buffers:Consult manufacturer's literature for further information.Product literature:http://www.ribaproductselector.com/documentdetails.aspx?ci=02175&f=COL1502175.pdf&pg=

The Crawford DL6010SM Minidock is a full docking system developed for a limited working range, the ideal solution for a standardized fleet of vehicles. It is available as ramp model as well as pit model. The advantage of the ramp model is the quick installation which also can be provided as an add-on to existing ramps. The operation of the Crawford DL6010SM Minidock is mechanical and is supported by a gas spring. Only one person is needed to lift the platform, swing out, and put the lip on the vehicle bed in one movement. The Crawford DL6010SM Minidock solution adopts a free-floating position - the platform follows the vehicle's movements up and down during loading and unloading. The dock leveller meets all requirements of European Directive EN 1398.

The swing lip safely bridges the gap between the ramp and the lorry bed. By manually pulling the rod, the dock leveller is raised and the lip swings out. Then the leveller can be lowered gently onto the lorry bed. After loading or unloading, pulling the rod raises the leveller again, the lip swings down and the platform returns to its parking position, i.e. to ramp level.

More about Crawford DL6010SM Swingdock Minidock Leveller:
As standard - Options - Further information.

PendingDOCK LEVELLER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DL6010SM Swingdock Minidock Leveller.
 Width:
[1250 mm].
[2000 mm].
[2200 mm].
 Surface treatment:
[Hot dip galvanized].
[Painted, RAL 3002].
[Painted, RAL 5010 ]. - As standard.
 Installation:
[Ramp]. - Steel support construction for buffers included.
[Pit].
 Buffers:
[Not required].
[RB].
[RB with steel protection plate].


top ^

Guidance

for Crawford DL6010SM Swingdock Minidock Leveller

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DL6010SM Swingdock Minidock Leveller: As standard - Options - Further information.

As standard

Length (nominal):

700 mm.

Vertical working range:

  • Above dock: 0–100 mm.
  • Below dock: 0–100 mm.

Lip material:

Steel.

Options

Load capacity:

  • 4 tonnes (40 kN); 6 tonnes (60 kN) for 2000 and 2200 mm widths.

Paint classes:

If the dock leveller is to be used in a rural area, the standard finish is:

  • Paint class 1; 80 µm factory painted for corrosive category C2 M.

If the dock leveller is to be used in an urban or industrial atmosphere, or in a coastal area, it may be appropriate to select an alternative paint class with increased resistance to corrosion C3 M.

  • Paint class 3; 160 µm factory painted for corrosive category C3 M.

To increase corrosion protection to C4 for saline coastal areas or C5-I for aggressive or humid atmospheres, the dock leveller can be delivered with hot dip galvanized (80 µm) steel parts.

Buffers:

Consult manufacturer's literature for further information.

Further Information

Literature:


RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

View larger image of Crawford 670 SIB Inflatable Airbag Dock Shelter from ASSA ABLOY Entrance Systems Ltd - IndustrialCrawford DS6070B Inflatable Airbag Dock Shelter

The inflatable seal is made up of a head section and two side sections, made from hardwearing durable PVC, housed behind two front curtains, made from a heavy duty flexible textile reinforced yellow PVC.The front curtains include luminous vertical parking guides.For protection the inflatable seal is supplied complete with steel guards.Unless otherwise stated the inflatable will be supplied with an overall projection of 770 mm and a head seal with 1000 mm drop.Construction:42 mm thick insulated panelling to the roof and the two sides.Inflatable seal comprising a head section and two side sections, made of hardwearing durable PVC and housed in behind two front curtains made from heavy duty flexible textile reinforced yellow PVC.Colour:RAL 1015 Ivory.RAL 1021 Yellow.RAL 3002 Red.RAL 5010 Dark Blue.RAL 6011 Green.RAL 7032 Grey.RAL 8017 Brown.RAL 9010 White.Other requirements:2000 mm electrically operated roll top curtain. Controls to be operated from a combination panel (i305).Numeral to front face of top box.Top seal with an extended overall length of 1300 mm.

The inflatable seal is made up of a head section and two side sections, made from hardwearing durable PVC, housed behind two front curtains, made from a heavy duty flexible textile reinforced yellow PVC.

The front curtains include luminous vertical parking guides.

For protection the inflatable seal is supplied complete with steel guards.

Unless otherwise stated the inflatable will be supplied with an overall projection of 770 mm and a head seal with 1000 mm drop.

More about Crawford DS6070B Inflatable Airbag Dock Shelter:
As standard - Options - Further information.

PendingLOADING BAY SHELTER SEAL:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DS6070B Inflatable Airbag Dock Shelter.
 Size:
[3600 x 3555 mm].
[3600 x 3755 mm].
[3600 x 4055 mm].
 Colour:
[RAL 1015 Ivory].
[RAL 1021 Yellow].
[RAL 3002 Red].
 Other requirements:
[2000 mm electrically operated roll top curtain].
[Controls to be operated from a combination panel (i305)].
[Numeral to front face of top box].


top ^

Guidance

for Crawford DS6070B Inflatable Airbag Dock Shelter

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DS6070B Inflatable Airbag Dock Shelter: As standard - Options - Further information.

As standard

Construction:

42 mm thick insulated panelling to the roof and the two sides.

Inflatable seal comprising a head section and two side sections, made of hardwearing durable PVC and housed in behind two front curtains made from heavy duty flexible textile reinforced yellow PVC.

Options

Colour:

  • RAL 1015 Ivory.
  • RAL 1021 Yellow.
  • RAL 3002 Red.
  • RAL 5010 Dark Blue.
  • RAL 6011 Green.
  • RAL 7032 Grey.
  • RAL 8017 Brown.
  • RAL 9010 White.

Other requirements:

  • 2000 mm electrically operated roll top curtain.
  • Controls to be operated from a combination panel (i305).
  • Numeral to front face of top box.
  • Top seal with an extended overall length of 1300 mm.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

View larger image of Crawford 667 SME Curtain Dock Shelter from ASSA ABLOY Entrance Systems Ltd - IndustrialCrawford DS6060S Curtain Dock Shelter

A front and rear frame made of aluminium profiles that are connected to each other by bracing arms. Curtain material black PVC reinforced with 2 layers of polyester textile, integral rain channel top section drains water off to each side.White parking guide, reinforcement straps to strengthen each side curtain.Construction:Aluminium front and rear frame with connecting bracing arms.Curtain material black PVC reinforced with 2 layers of polyester textile, integral rain channel top section drains water off to each side1000 mm deep top curtain, slit at vehicle contact points.Fabric weight:3300 g/m².Tensile strength:To DIN 53354, longitudinal strength 7000 N, transverse strength 5000 N, tear elongation to DIN 53363.Other requirements:1200 mm long top curtain.1500 mm long top curtain.1750 mm long top curtain.Bottom corner cushion seals.Nominal depth 900 mm.Numeral to top curtain.Segmented top curtain.

A front and rear frame made of aluminium profiles that are connected to each other by bracing arms.

Curtain material black PVC reinforced with 2 layers of polyester textile, integral rain channel top section drains water off to each side.

White parking guide, reinforcement straps to strengthen each side curtain.

More about Crawford DS6060S Curtain Dock Shelter:
As standard - Options - Further information.

PendingLOADING BAY SHELTER:
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DS6060S Dock Shelter.
 Size:
[3450 x 3200 x 600 mm].
[3450 x 3400 x 600 mm].
[3450 x 3600 x 600 mm].
 Buffers:
[Crawford Moving Buffers]. - Optional.
[Loading bay rubber buffers]. - Optional.
 Other requirements:
[1200 mm long top curtain].
[1500 mm long top curtain].
[1750 mm long top curtain].


top ^

Guidance

for Crawford DS6060S Curtain Dock Shelter

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DS6060S Curtain Dock Shelter: As standard - Options - Further information.

As standard

Construction:

  • Aluminium front and rear frame with connecting bracing arms.
  • Curtain material black PVC reinforced with 2 layers of polyester textile, integral rain channel top section drains water off to each side
  • 1000 mm deep top curtain, slit at vehicle contact points.

Fabric weight:

3300 g/m².

Tensile strength:

To DIN 53354, longitudinal strength 7000 N, transverse strength 5000 N, tear elongation to DIN 53363.

Options

Other requirements:

  • 1200 mm long top curtain.
  • 1500 mm long top curtain.
  • 1750 mm long top curtain.
  • Bottom corner cushion seals.
  • Nominal depth 900 mm.
  • Numeral to top curtain.
  • Segmented top curtain.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

View larger image of Crawford 662 SMP Curtain Dock Shelter from ASSA ABLOY Entrance Systems Ltd - IndustrialCrawford DS6060P Curtain Dock Shelter

A front and rear frame made of aluminium profiles that are connected to each other by scissor action bracing arms.Curtain material black PVC reinforced with 2 layers of polyester textile, integral rain channel top section drains water off to each side.White parking guide, reinforcement strap to strengthen each side curtain.Construction:Aluminium front and rear frame with connecting scissor action bracing arms.Curtain material black PVC reinforced with 2 layers of polyester textile, integral rain channel top section drains water off to each side.1000 mm deep top curtain, slit at vehicle contact points.Fabric weight: 3400 g/m².Tensile strength:To DIN 53354, longitudinal strength 7000 N, transverse strength 5000 N, tear elongation to DIN 53363.Other requirements:1200 mm long top curtain.1500 mm long top curtain.1750 mm long top curtain.Bottom corner cushion seals.Nominal depth 900 mm.Numeral to top curtain.Segmented top curtain.

A front and rear frame made of aluminium profiles that are connected to each other by scissor action bracing arms.

Curtain material black PVC reinforced with 2 layers of polyester textile, integral rain channel top section drains water off to each side.

White parking guide, reinforcement strap to strengthen each side curtain.

More about Crawford DS6060P Curtain Dock Shelter:
As standard - Options - Further information.

PendingLOADING BAY SHELTER :
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DS6060P Dock Shelter.
 Size:
[3450 x 3200 x 600 mm].
[3450 x 3300 x 600 mm].
[3450 x 3300 x 600 mm].
 Buffers:
[Crawford Moving Buffers]. - Optional.
[Loading bay rubber buffers]. - Optional.
 Other requirements:
[1200 mm long top curtain].
[1500 mm long top curtain].
[1750 mm long top curtain].


top ^

Guidance

for Crawford DS6060P Curtain Dock Shelter

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DS6060P Curtain Dock Shelter: As standard - Options - Further information.

As standard

Construction:

  • Aluminium front and rear frame with connecting scissor action bracing arms.
  • Curtain material black PVC reinforced with 2 layers of polyester textile, integral rain channel top section drains water off to each side.
  • 1000 mm deep top curtain, slit at vehicle contact points.

Fabric weight:

3400 g/m².

Tensile strength:

To DIN 53354, longitudinal strength 7000 N, transverse strength 5000 N, tear elongation to DIN 53363.

Options

Other requirements:

  • 1200 mm long top curtain.
  • 1500 mm long top curtain.
  • 1750 mm long top curtain.
  • Bottom corner cushion seals.
  • Nominal depth 900 mm.
  • Numeral to top curtain.
  • Segmented top curtain.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 

Crawford DS6070R Inflatable Roller Airbag Shelter

The handling of cooled or frozen food puts high demands on the temperature chain. The Crawford DS6070R inflatable shelter provides the optimal sealing of temperature controlled premises during the loading and unloading process. Contrary to other types of dock shelters, the vehicle does not push towards the shelter. Instead, the shelter is air inflated around the docked vehicle, providing complete sealing. The Crawford DS6070R inflatable shelter is suitable for all vehicle sizes and its sealing capacity exceeds by far the standard normally required by the operators.When a vehicle is positioned at the docking station, the Crawford DS6070R is activated by the control unit. The side bags inflate, whilst the top part, which is a roller curtain descends until resting on the trailer roof. A unique balancing system makes the top roller curtain 'free floating' when the vehicle is docked. During loading/ unloading the vehicle moves up and down and the top roller curtain automatically follows these movements, without starting the roller curtain machinery. The roller guidance design includes a unique break-away system to follow horizontal movements. In rest position, the bags are held in place mechanically.Material:Insulated panel wall and roof, 42 mm.Width:3600 mm.Depth:700 mm.Bag extension:Top: 2200 mm.Side: 650 mm.Colour:White, RAL 9016.Surface treatment:Hot galvanized and painted with polyester paint, which corresponds to environmental class 3.Front protection: Yellow polyethylene plastic.Control unit:Switch control.Fabric quality: Top curtain: PVC coated polyester fabric 650 g/m², thickness 0.6 mm.Side bag rear: Made of PVC coated polyester fabric 600 g/m², thickness 0.5 mm.Side bag front: Made of PVC coated polyester fabric 2500 g/m², thickness 2 mm.Optional wear shield: PVC coated polyester fabric 3400 g/m², thickness 3 mm.Fan:230 V, single phase, 50 Hz, 250 W.Operation:Switch control included. Other controls available as option.

The handling of cooled or frozen food puts high demands on the temperature chain. The Crawford DS6070R inflatable shelter provides the optimal sealing of temperature controlled premises during the loading and unloading process. Contrary to other types of dock shelters, the vehicle does not push towards the shelter. Instead, the shelter is air inflated around the docked vehicle, providing complete sealing. The Crawford DS6070R inflatable shelter is suitable for all vehicle sizes and its sealing capacity exceeds by far the standard normally required by the operators.

When a vehicle is positioned at the docking station, the Crawford DS6070R is activated by the control unit. The side bags inflate, whilst the top part, which is a roller curtain descends until resting on the trailer roof. A unique balancing system makes the top roller curtain 'free floating' when the vehicle is docked. During loading/ unloading the vehicle moves up and down and the top roller curtain automatically follows these movements, without starting the roller curtain machinery. The roller guidance design includes a unique break-away system to follow horizontal movements. In rest position, the bags are held in place mechanically.

More about Crawford DS6070R Inflatable Roller Airbag Shelter:
As standard - Options - Further information.

PendingINFLATABLE ROLLER AIRBAG SHELTER :
 Manufacturer:
ASSA ABLOY Entrance Systems Ltd - Industrial.
  -Web:www.assaabloyentrance.co.uk.
  -Tel:+44 (0)333 006 3443.
  -Product reference:
Crawford DS6070R Inflatable Roller Airbag Shelter.
 Height:
[4055 mm].
[4355 mm].
[4555 mm].
 Colour:
[ ______ ] - Insulated panels and front plate in white, RAL 9016 as standard. Other colours available on consultation, insert requirements.
 Wear shields:
[Not required].
[Required].


top ^

Guidance

for Crawford DS6070R Inflatable Roller Airbag Shelter

from ASSA ABLOY Entrance Systems Ltd - Industrial

More about Crawford DS6070R Inflatable Roller Airbag Shelter: As standard - Options - Further information.

As standard

Material:

Insulated panel wall and roof, 42 mm.

Width:

3600 mm.

Depth:

700 mm.

Bag extension:

  • Top: 2200 mm.
  • Side: 650 mm.

Colour:

White, RAL 9016.

Surface treatment:

Hot galvanized and painted with polyester paint, which corresponds to environmental class 3.

Front protection:

Yellow polyethylene plastic.

Control unit:

Switch control.

Fabric quality:

  • Top curtain: PVC coated polyester fabric 650 g/m², thickness 0.6 mm.
  • Side bag rear: Made of PVC coated polyester fabric 600 g/m², thickness 0.5 mm.
  • Side bag front: Made of PVC coated polyester fabric 2500 g/m², thickness 2 mm.
  • Optional wear shield: PVC coated polyester fabric 3400 g/m², thickness 3 mm.

Fan:

230 V, single phase, 50 Hz, 250 W.

Options

Operation:

Switch control included. Other controls available as option.

Further Information

Literature:

RIBA Product Selector

Additional information may be available for ASSA ABLOY Entrance Systems Ltd - Industrial from ribaproductselector.com.

Contacts:

www.assaabloyentrance.co.uk

sales.uk.crawford@assaabloy.com

T: +44 (0)333 006 3443

F: +44 (0)114 257 4399

top ^

 
Drag work item to add to schedule

top ^

 
NBS Plus
NBS Building, online library, 14 December 2017